コシハラ List of Products and Services

The low-floor long-span elevator KRD-980LF, which does not require a stage and is suitable for narrow sites, has been very well received since its release. Following the launch, we received requests for a low-floor long-span elevator that can accommodate a two-span scaffold interval, and we have started selling the KRD-980LF3, which is compatible with two spans. With the addition of an intermediate platform, it can now accommodate not only two spans but also three and four span scaffold intervals. The guide rails, of course, are compatible with the intermediate platform of the KRD-980LF. By widening the opening of the protective roof and improving the workability during the installation of the guide rails, we have also made it possible to lift the end platform without removing the roof, leading to a reduction in labor. For more details, please contact us.

• Vertical Conveyor System
• Transport machinery

■Smooth operation of elevation, rotation, and winching using hydraulic power ■Can be set up on slopes of up to 15° by rearranging the outriggers

• Transport machinery

■Significantly reduced jib length change time Thanks to the adoption of a moment limiter, sudden jib length changes on site are easy. ■Achieves the largest working radius in its class at 28m ■Can lift 2 tons at a working radius of 24m Furthermore, smooth operation with inverter control ■Easy operation with the adoption of a joystick-type wireless controller

• Transport machinery
• Crane and others

- By adopting a 2m top mast, safe assembly work such as support installation can be achieved while the mast is set up. - Smooth operation is possible with hoisting, elevation, and rotation inverter control. - Compact wireless operation. - Ground-mounted control panel for easy maintenance. 【Jib Length】12.9m Working Radius: 1.22m to 13.0m Lifting Capacity: 19.61kN at 10.58m, 15.39kN at 13.0m 【Jib Length】16m Working Radius: 1.38m to 16.0m Lifting Capacity: 19.61kN at 10.5m, 12.25kN at 16.0m 【Ground Lifting Height】Standard 95m, Maximum 125m 【Total Mast Length】Standard 80m, Maximum 110m 【Total Weight】21.7t (Crane body at 80m)

• Transport machinery

- By adopting a 2m top mast, safe assembly work such as support installation can be achieved while the mast is in place. - Smooth operation is possible with hoisting, elevation, and rotation inverter control. - Compact wireless operation. - Ground-mounted control panel for easy maintenance. 【Jib Length】18.75m Working Radius: 1.65m to 18.0m Lifting Capacity: 16.61kN at 18.0m, 27.45kN at 13.5m 【Jib Length】20.915m Working Radius: 1.77m to 20.0m Lifting Capacity: 17.65kN at 20.0m, 27.45kN at 13.5m 【Ground Lift Height】Standard 117m, 147m, Maximum 165m 【Total Mast Length】Standard 100m, 130m, Maximum 150m 【Total Weight】32.0t (Crane body at 102m)

• Transport machinery

We import and sell the OMAX waterjet cutting machines from OMAX Corporation in the United States. Waterjet cutting does not affect the material with heat and does not impose strong stress, so it does not alter or deform the material. Additionally, it does not discriminate against materials, allowing for the cutting of almost all types of materials. It is suitable for one-off prototypes and cutting small quantities of test pieces. We welcome visits to our Koshihara Osaka factory to see the small waterjet 'PROTO MAX'. Please feel free to contact us with any questions regarding waterjet cutting. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Roll-mover" is a cart that allows for the easy and lightweight transportation of roll-shaped items. Using standard work air, it is possible to move heavy rolls of paper, coils of metal sheets, cable reels, and other items by oneself. This unique technology provides a reliable and user-friendly means of transport for roll handling needs. 【Features】 ■ Easily and safely move rolls, reels, or coils weighing up to 12,000 pounds / 5443 kg ■ Accommodates various roll widths and diameters ■ Allows for precise control to place rolls in tight spaces ■ Low maintenance - hassle-free ■ Clean and quiet operation *This PDF document is in English. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Roll-master" is a cart that allows for easy transportation of cargo using standard work air. It enables a single person to effortlessly carry heavy loads such as rolls of paper, coils of metal sheets, and cable reels. This unique technology provides a reliable and user-friendly means of transport for roll handling needs. 【Features】 ■ Easily and safely moves rolls, reels, or coils up to 12,000 pounds / 5443 kg ■ Accommodates various roll widths and diameters ■ Allows for precise control to place rolls in tight spaces ■ Low maintenance - hassle-free ■ Clean and quiet operation *This PDF document is in English. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The Wheeled-Vehicle is a large-capacity self-propelled modular transporter (SPMT) that can be easily operated. It is designed to be a cost-effective, safe, and highly maneuverable cargo handling system. With a battery-powered dedicated drive system, a single operator can accurately move loads ranging from 10 to 200 tons. It operates on standard flooring, eliminating the need for severe floor measures. 【Features】 ■ Synchronized four-wheel steering ■ Wireless remote control ■ Rechargeable battery system ■ Excellent safety ■ Omnidirectional movement *This PDF document is the English version. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The Air Cushion Vehicle is a wireless transport cart equipped with an automatic height control system that can correct weight balance and center of gravity position. It is an ideal solution for moving heavy items such as transformers, pressure vessels, and storage casks on factory assembly lines. Featuring a robust steel structure, modular components, and a flat loading deck, it can withstand years of repeated use. 【Features】 ■ Equipped with an automatic height control system to correct weight balance and center of gravity position ■ Powered drive for stable maneuverability ■ Wireless remote control for power, emergency stop, travel speed, and steering operation ■ Allows shared use of the Air Cushion Vehicle by utilizing multiple skid platforms ■ Option to include an electric control hose reel in the system *This PDF document is the English version. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Load Runner" is a self-contained unit capable of lifting and transporting weights of up to approximately 1100 kg. By reducing friction with the floor using the power of air, it is much easier to maneuver compared to hand pallet trucks and can be moved lightly. Unlike conventional air caster dollies like the "Aero Palette," it has a built-in rechargeable compact compressor, eliminating the need for air hoses. When air is not inserted, small wheels are attached to the main body, allowing it to be moved like a regular dolly. The patent-pending Load Runner optimizes the movement of heavy loads for a single operator, ensuring ergonomic safety and reducing strain. 【Features】 ■ Can be handled like a dolly ■ Built-in rechargeable compact compressor ■ No air source needed ■ No air hose needed ■ Very easy to maneuver ■ Can be moved lightly *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Air Caster" is a transport system that uses air for the transportation and positioning of heavy objects. It can move the weight of the transported items in any direction with a thrust of 0.3%, and positioning and direction changes can be easily performed. It is easy to operate for anyone, and requires little maintenance. If you are having trouble with transportation methods, please feel free to consult us. *Koshihara is a company that has a technical partnership with Aerogo as a machinery manufacturer. 【Features of the Air Caster】 ■ Can move heavy objects with light force ■ Direction is not fixed ■ Minimal damage to the floor surface ■ Easy to use and operable by anyone ■ Requires little maintenance ■ Generates little noise and dust, making it suitable for use in clean rooms ■ Suitable for transporting heavy objects in various fields, including construction, civil engineering, and industrial equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

This catalog is the technical manual for heavy load moving equipment published by Koshihara Co., Ltd. It includes an overview of the system, a list of components and specifications, delivery records, and more, accompanied by photographs. *Air casters refer to heavy load moving equipment. [Contents] ■ Overview of the air caster system ■ Components of the air caster system ■ List of specifications for the air caster system ■ Equipment and usage examples of the air caster system ■ Delivery records ■ How to view videos *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

Air casters (heavy load moving devices) have performance that varies significantly depending on the condition of the runway. Therefore, if there are gaps or steps in the runway that allow air to escape, the performance may not be sufficient. When such areas are discovered, please promptly carry out repairs or protective measures. As a temporary measure, it is also possible to use strong tape to cover gaps and address the issue. [Relationship between heavy load moving devices and the runway] They form a film of air that reduces friction resistance. Therefore, a certain level of surface finishing is required for the runway, and if it is not adequately finished, it will not be able to demonstrate sufficient capability and may lead to early damage. Additionally, if the runway has a slope, there is a risk that the air pressure will cause it to flow down the slope as soon as it is lifted, so caution is necessary. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

Air casters (heavy load moving devices) can be broadly divided into two types. This mainly refers to the difference in load capacity, and further categorized into two types: standard type (Standard) and heavy-duty type (Heavy Duty). Additionally, there are special products such as the Gapmaster, which is designed to handle steps and gaps, and high-lift types used when additional lifting height is needed. Furthermore, customization of the machines is possible according to customer requests. We also accept inquiries regarding material transportation. 【Product Lineup】 ■ Neoprene ■ Urethane ■ Gapmaster *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

Introducing the operating principles of the air caster system (heavy load moving device), including traction force, system structure, and selection methods. In the size selection method, we first clarify the total weight and external dimensions of the object to be transported. Then, we tentatively decide on the type of heavy load moving device to be used. When determining the type, using a smaller number of larger diameter casters provides more stability than using a larger number of smaller diameter casters. Next, we determine the relationship between the height of the heavy load moving devices and the center of gravity. The optimal condition is when the height of the center of gravity is within 1.5 times the distance between the casters. If it exceeds this, please widen the distance between the casters. *By downloading the PDF materials, you can view more detailed explanations.

• Material handling systems and equipment

The air caster system (heavy load moving device) developed by Boeing has been researched and developed by Aerogo. This system allows for the easy and safe transportation and positioning of super-heavy loads, which was difficult with previous transport devices, while also minimizing noise and impact on the surrounding area. Additionally, the machine can be customized according to customer requests. We also accept inquiries regarding the transportation of materials. 【Features】 ■ Direction is not fixed ■ Super-heavy loads can be moved with minimal power ■ Easy to use, anyone can operate it ■ Reduces equipment and maintenance costs ■ Safe, low vibration, and low noise operation *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

"Aerodrive" is a drive system equipped with an air motor. Aerodrive is used with direct steering and high torque to enable intuitive and precise placement of heavy objects even in narrow spaces. It uses air suspension to press the wheels against the floor and drive the air motor for the movement of transported items. Concentrated fingertip control allows the operator to accurately place the cargo in any direction. It can be selected to accommodate various heavy objects. It can handle transported items weighing up to approximately 100 tons per unit. Due to its simplified system, it can be easily used by anyone. It is recommended for reducing personnel involved in the transportation of heavy objects. [Features] ■ Simplified system ■ Capable of handling transported items weighing up to approximately 100 tons per unit ■ Recommended for personnel reduction *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Aeroplank" can be configured as a moving tool for various types of cargo. The planks are connected by an air hose, allowing for flexible width adjustments within the range of the hose length. You can specify the length of the planks, making it possible to use them according to the cargo being transported. 【Features】 ■ Width can be freely set within the range of the hose length ■ Plank length can be specified ■ Usable according to the cargo being transported *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Aero Palette" is designed to move loads of up to 40 tons. For unlimited operability, the Aero Palette is particularly popular in situations such as manufacturing and assembly of parts. The Aero Palette can work alongside forklifts, cranes, and conveyors at a low cost, or serve as an alternative means of transportation. Optional handles, throttle controls, and wheels for use when unloaded are available. It is much easier to maneuver compared to hand pallets and can be moved lightly. Only one air hose is needed, making hose handling easy. 【Features】 ■ Can be handled like a cart ■ Very easy to maneuver ■ Can be moved lightly ■ Size can be specified ■ Easy hose handling *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Air Caster Load Module" provides a new means of transport for moving packages of various sizes, shapes, and weights. Also known as machine skates, air skates, or air dollies, this versatile heavy-duty transport product can be placed under loads of different shapes. It consists of four air caster load modules, one console box (air distributor), and four connecting air hoses. One load module can transport loads weighing up to approximately 50 tons. The load modules come in fixed mount and slide mount types, and various combinations of materials can be selected, including standard neoprene and highly durable urethane types. We will make suggestions considering your usage environment and the items to be transported, so please feel free to contact us. 【Features】 ■ Capable of transporting loads weighing up to approximately 200 tons (when using four modules) ■ Can be set according to the size of the load ■ Compatible with various sizes of transported items ■ Various types can be selected according to the usage environment *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

The "KRD-950" is a rotor deck suitable for medium to large work sites, designed as a sister model to the "KRD-800." It has a load capacity of 950 kg, including the weight of the passenger seat, a platform width of 1 meter, and can accommodate up to 6 passengers. Additionally, the guide rails are compatible with the "KRD-800," and it features a smooth rotary drive system for easy ascent and descent. Various safety devices have been further enhanced to ensure comprehensive safety measures. 【Features】 ■ Long-span construction elevator ■ Compliant with new regulations ■ Accommodates 6 passengers ■ Guide rails are compatible with the "KRD-800" ■ Installation report only required *For more details, please refer to the PDF materials or feel free to contact us.

• Elevator

The new low-landing type "KRD-980LF" rotor deck is an elevator designed for long-span construction work. In narrow construction sites such as urban areas, it eliminates the landing stage and allows installation within the space of the elevator body (stage guard is required), achieving shared (dual-use) guide rails with the conventional KRD series. From this time, the inclination detection device has also been completely renewed to a gyro type, enhancing accuracy and safety. This product comes with a standard specification of a plated finish, reducing painting costs during maintenance. 【Features】 ■ Achieves shared guide rails with the KRD series ■ Realizes a landing height of 300mm ■ Low vibration and low noise ■ An elevator with a high demand for a load capacity of 980kg ■ Effective width of the carrier is 983mm, making board loading easy ■ The outer width of the carrier is 1080mm, allowing installation on 900mm scaffolding *For more details, please refer to the PDF materials or feel free to contact us.

• Elevator

"Air casters" are a system that lifts heavy objects 0.25mm off the floor using a film of air, reducing gravity to 3/1000 for transportation. To form an air film between the runway and the load, a certain level of surface finish is required for the runway. If the finish is insufficient, it will not perform adequately and may lead to early damage of the product. Additionally, if there are gaps or steps in the runway that allow air to escape, it will not meet performance standards. If such areas are discovered, please promptly carry out repairs. As a temporary measure, it is also possible to use strong tape to cover gaps. [Relationship between Air Casters and Runway] - Our product forms an air film between the runway and the load, reducing friction resistance. - If the runway has a slope, there is a risk that the load may flow down the slope as soon as air pressure is applied to lift it, so caution is necessary. *The allowable slope is up to an average of 0.3%, and locally it can accommodate slopes of about 0.5%. *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Air Caster" is a system that lifts heavy objects 0.25mm off the floor using an air film, reducing gravity to 3/1000 for transportation. We would like to introduce the types of load modules that form the basis of the Air Caster system. The load module consists of two main parts: 1. Element - a part that inflates like a floating ring with air. 2. Mounting Plate - a honeycomb-structured base that supports the transported item. There are two types of load modules: the "Fixed Mount Type," where the element is secured to the mounting plate, and the "Slide Mount Type," where the element can slide in and out without being fixed. There are also three types of elements: 1. Neoprene - the standard type. 2. Urethane - coated with urethane to improve wear resistance. 3. Gap Master - a type designed to address the weaknesses of the Air Caster, such as steps and gaps. The sizes of the load modules range from 12 inches to 60 inches. *For more details, please refer to the PDF document or feel free to contact us.*

• Material handling systems and equipment

There are various methods for horizontally moving heavy objects, such as cranes, battery trolleys, and forklifts. Operating cranes and forklifts requires licenses and skills. Battery trolleys raise concerns about battery life and can cause damage to the floor. Iron wheel trolleys require tracks to be laid and have limited pathways. "Air casters" are a convenient transport system that does not have these limitations and can be introduced with minimal investment. Using only the power of air, they can move even the heaviest items freely by pushing, pulling, or changing direction. 【Features of Air Casters】 ■ Direction is not fixed ■ Super heavy objects can be moved with minimal power ■ Easy to use, anyone can operate it ■ Reduces equipment costs and maintenance expenses ■ Safe, low vibration, and low noise operation *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

The "Air Caster" is an air caster system for transporting and positioning ultra-heavy objects. It can lift heavy objects 0.25mm off the floor using a film of air, reducing gravity to 3/1000 for transportation. With the use of this system, the transportation and positioning of ultra-heavy objects, which were previously impossible with cranes or forklifts, can now be done easily, safely, and quietly. Moreover, it has received positive feedback from various sectors for its ability to reduce transportation and maintenance costs, as well as its effectiveness in labor-saving. 【Features】 ■ Direction is not fixed ■ Ultra-heavy objects can be moved with minimal power ■ Easy to use, anyone can operate it ■ Reduces equipment and maintenance costs ■ Safe, low vibration, and low noise operation *For more details, please refer to the PDF materials or feel free to contact us.

• Transport machinery

The "KRD-980" is a upgraded rotor deck designed primarily for use in narrow workspaces in urban areas, as a sister model to the "KRD-800." It has a payload capacity of 980 kg, including the weight of the seating, a platform width of 1.2 m, and can accommodate up to 7 passengers. Depending on your needs, you can choose between a dual-roof type (for 7 passengers) and a standard type (for 4 passengers). Additionally, this model features an all-plated design as standard, making maintenance easy. 【Features】 ■ Long-span construction elevator ■ Guide rails are compatible with the "KRD-800" ■ Smooth lifting with a rotary drive system ■ The intermediate platform configuration allows for varying frame scaffold spacing of 7.2 m, 5.4 m, and 3.6 m ■ Overload device can also be installed (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Elevator

The "Air Caster" is a transport system that uses air for the transportation and positioning of heavy objects. It can move the weight of the transported items in any direction with a thrust of 0.3%, and positioning and direction changes can be easily performed. It is easy for anyone to operate, and requires little maintenance. If you are having trouble with transportation methods, please feel free to consult us. *Koshihara is a company that has a technical partnership with Aerogo as a machinery manufacturer. 【Features of the Air Caster】 ■ Can move heavy objects with light force ■ Direction is not fixed ■ Minimal damage to the floor surface ■ Easy to use and operable by anyone ■ Requires little maintenance ■ Generates little noise and dust, making it suitable for use in clean rooms ■ Suitable for transporting heavy objects across various fields, including construction, civil engineering, and industrial equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Foundation construction machinery