シロ産業 List of Products and Services

The M1026VR-T2T is ideal for managing lamp intensity in UV irradiation devices used for curing, sealing and adhesive processing of electrical and electronic components, printing, drying, and mounting lines for printed circuit boards, and sterilization processes in various industries. *Please note that various light-receiving parts and display units are sold separately, so please select the appropriate light-receiving part according to your application and combine it with the display unit. Four types of light-receiving parts are available to match the desired wavelength (please select at the time of purchase). It is equipped with a function to automatically recognize the four types of light-receiving parts.

• others

■ Work efficiency and productivity are greatly improved. ● Since loading onto the truck can be done freely, large quantities can be transported at once, significantly enhancing work efficiency. ● The operation handle can be turned easily, so there are no concerns about energy sources such as hydraulics or electricity.

• others

The spectral response curve of the light measurement probe approximates the human eye's response curve known as the standard photopic curve V(λ). The difference between "WPLP-PHOT-01" and the standard photopic curve V(λ) in spectral response is calculated as error f'1. The calibration of the probe is conducted by comparing it with a photometer that has been calibrated by a primary metrology standard institution. The calibration procedure complies with CIE Document No. 69 (1987) "Method of Characterizing Illuminance Meters and Luminance Meters." Measurements are conducted by illuminating the probe with standard light A. The outdoor installation type is the MC8P-PHOT3S series.

• others

The drive motor uses a DC brushless motor to achieve energy savings. Since the motor starts up as needed, power consumption during standby and motor operating noise are kept to a minimum. You can choose between two modes for packaging speed and tightening method. The packaging speed is 54 bundles per minute in standard mode and 63 bundles per minute in high-speed mode. The tightening method can be selected between torque tightening and stroke tightening, allowing for optimal tightening force during packaging. Both can be switched based on the settings of the IC box.

• others

Equipped with a HEPA filter that captures fine dust particles. The high-performance HEPA filter installed at the exhaust port captures and retains fine dust particles of 0.3μm or larger, ensuring clean exhaust. By directing the exhaust straight up, it helps suppress the rise of dust.

• Building Cleaning Equipment

Since both ends of the load cell have male threads, it can be fixed to equipment, and connections such as eye bolts are also possible. Despite its small size, it can measure up to 5000N.

• others

●Convenient operation method ●Production of 5 types of cushions ●Technology verified in America and Europe

• others

● A thickness gauge capable of measuring ferrous substrates. Convenient handheld size. The MB8G-13ERT also supports measurements on non-ferrous metal substrates. ● Equipped with an upside-down display function, making it easy to check results during overhead measurements. ● Features two types of self-calibration functions: standard calibration and zero calibration. ● Includes an "alarm setting mode" function that alerts you with sound when measurements exceed the set upper/lower limits.

• others

Two types of font sizes (character height 56.8mm / 101.6mm) are available. All models come with hanging / stationary brackets included.

• Other measuring instruments

● This is a height of 740 mm, ideal for standing work for elementary and middle school students. ● A slim type with a depth of 600 mm, convenient for use in narrow spaces. ● The tabletop can be easily folded by two people, achieving space-saving. ● It can store four units in the space of a single tatami mat. ● Equipped with casters for easy movement. ● Features W stopper casters that provide exceptional stability by firmly fixing the unit. The W stopper simultaneously stops the swivel and the rotation of the wheels. ● The floor laminate tabletop absorbs shocks and vibrations more easily than regular melamine tabletops, reducing the risk of cracking.

• others

You can detect even the smallest leaks regardless of the type of pipe, such as PVC or steel pipes.

• Other analytical equipment

It has excellent luminosity, allowing for visibility from a long distance. Its waterproof design ensures safety during work in rainy conditions. The stand can rotate 90 degrees for storage, making it easy to carry and move.

• others

It is a switchable type for blinking and flowing. When the power switch is turned on, it automatically blinks at night and turns off during the day. It can be folded in half, making it convenient for carrying and storage, and it can be stacked up to five units.

• others

● Securely seals thick gusset bags Despite being a compact tabletop type, it accommodates thick films, laminated bags, and thick gussets. ● Upper and lower heating method It heats not only from the bottom but also from the top. ● Heating and cooling time indicated by lamp color The timer lamp lights up red during heating and turns blue during cooling, allowing you to visually confirm the important "cooling time" for beautifully finished seals. Once cooling is complete, the blue indicator turns off, and a beep signals the end of sealing. ● Compatible with a variety of packaging materials The sealing pressure is set to match standard thickness bags at the factory, but the appropriate sealing pressure varies depending on the material and thickness of the bag. If the sealing pressure is not appropriate, the seal will be incomplete, so please adjust the sealing pressure using the pressure adjustment nut as needed. ● Uses a braided heater It employs a highly flexible braided heater that absorbs large steps, accommodating sealing of thick films, laminated bags, and thick gusset bags. The braided heater is made by weaving fine wires of nickel-chromium (NiCr) into a braided form, characterized by its high flexibility.

• others

The vibrations detected by the gyro sensor are controlled in two axes, horizontal and vertical, through a gimbal mechanism using a voice coil motor. *When the gyro sensor is turned off, it can be used as a regular monocular scope. The gyro sensor has a long battery life design with approximately 30 hours of operation. Available in three lineups: 10-20x zoom, 6-12x zoom, and 10x.

• others

●MD34T-295T1 and MD34T-295T2 are disposable types with non-replaceable batteries, making them ideal data loggers for one-way transport, such as when exporting overseas. ●MD34T-295T3 has a replaceable battery and can be reused multiple times. ●MD34T-295T4 is a temperature data logger that supports ultra-low temperatures down to -80°C. It is suitable for transporting products that must be stored at ultra-low temperatures. ●MD34T-295H1 can be used to monitor the storage environment of products that are sensitive to humidity during food transportation. ●MD34T-295G1 records data when vibrations and shocks occur, thanks to its temperature and humidity sensors, as well as three-axis (x/y/z) accelerometers. It is ideal for monitoring temperature, humidity, and shocks during the transportation of sensitive pharmaceuticals, food, precision electronic devices, and cultural properties. ●It also complies with the aviation standards "RTCA DO 160 Section 21 Category H."

• others

It can be used as a measure against the My Number system since it has a lock. The lock is a dial type, so there is no need to manage keys. It uses a full-time method where you can set a fixed PIN in advance for locking and unlocking. Its compact size makes it ideal for collecting up to A4 size. It can also be stored inside cabinets or safes.

• others

It can also be used as a temporary collection box for unnecessary documents containing My Number. It is also ideal as a collection box for entry passes. The lock is a combination lock type, with a full-time method that allows for locking and unlocking by setting a fixed PIN in advance.

• others

● Lightweight and easy to handle, allowing for simple airflow measurement tasks to be performed by one person. ● Wide airflow measurement range: 85 to 4,250 m3/h ● Easy-to-read and user-friendly simple design with a full-color LCD No complicated calculations needed. Airflow is displayed immediately after pressing the start button. (Temperature and humidity are displayed simultaneously) ● Capable of determining the flow direction at intake and exhaust points ● Data logging function for up to 3,000 readings ● Measurement data can be saved with individual ID management ● Built-in back pressure compensation function to ensure accuracy at high airflow rates ● Equipped with atmospheric pressure compensation function ● Transparent hood for easy alignment with air conditioning vents The standard hood is made of transparent material, making it easy to align with air conditioning vents. The hood is foldable and does not take up storage space. ● Five types of optional hoods to choose from based on application A standard hood measuring 610×610mm is included. Additionally, five other hoods of different sizes are available (sold separately). ● Stand compatible with high ceilings (optional) A stand that can be extended from 1.2 to 2.5m is available (sold separately).

• Anemometer

Prevention of excessive cooling with natural wind using water! Automatic swing function with left and right oscillation!

• Cooling system

●Long Battery Life With a battery life of approximately 10 years, long-term deployment is possible. ●Two Channels for Radiation Temperature/Internal Temperature Continuously measures the temperature of the target object non-contact. A temperature sensor is also installed inside the main unit to simultaneously monitor the temperature of the measurement location. ●Four Types of Infrared Radiation Temperature Sensors Choose from +25 to +80℃, +70 to +104℃, +145 to +170℃, and +170 to +250℃ according to your application. ●Memory Capacity: 500,000 / Channel The measured temperature data is stored in non-volatile memory, so even if the battery is depleted and operation stops, the data up to the point of shutdown is saved in memory. ●Standard Thermocouple Sensors Can Also Be Used ●Comes with ISO/IEC 17025 Calibration Certificate.

• others

Oil and water resistant. Water absorption rate below 1%. Strong against cutting and chips.

• others

A joint type that can be connected and extended to your preferred length. It is suitable for tasks involving large groups, such as assembly line work. Each extension piece can increase the width by 820mm. Material: NBR/PU.

• others

● "Pallet-specific back pain prevention device" designed for back pain associated with pallet use ● Prevents back pain and increases work efficiency ● Maintenance-free as it does not use electricity. More affordable compared to electric options ● Load settings are easy and tool-free, requiring only spring replacement (load changes with different spring combinations) ● Simply place the pallet on the leveler, and the weight allows for work at waist height at all times

• Turntable

We have established table sizes and stock cases for containers, assuming work using 50L folding containers. Since it does not require electricity, you can easily start addressing back pain anywhere, without being limited by location.

• others

● Equipped with locking hardware Standard equipment includes hardware that can be locked using a padlock (the diameter of the hasp [hook] is 8mm) ● Easy-to-open lid handle and one-touch locking hardware included (except for M510XA-176A/176A-GR) ● Transport handle included Includes a handle for convenient transportation of the BOX ● Opening support pole Includes a support pole that can secure the lid when opened ● BOX fixing hardware The main BOX can be secured to a truck or support pole.

• others

■1.2.3. Water Weight Type for Installation This is a floor sign that can use commercially available plastic bottles as "weights." It can accommodate weights of up to 1.5 kg. Of course, it can also be used without weights. We offer a wide variety of options to be used in various situations, such as warning of hazards in factories and public facilities, organizing shared spaces, and more.

• others

● Fixed magnification handheld microscope Magnifications: Available in 20×, 50×, 100×, and 200×. ● Direct lighting with 18 LED lamps (power supply sold separately) Provides bright lighting ideal for flat surfaces with minimal unevenness. ● Upright image type, making it easy to see the image like a loupe Unlike typical microscopes where the image is inverted, this product uses a dove prism in its optical system, allowing for observation without image inversion. This makes it easy to handle and operate, similar to a loupe. ● Precision scale standard equipment A precision scale is built into the eyepiece of the microscope, allowing for measurement of the length of the observed object. (The scale width varies depending on the magnification.)

• others

- Products optimal for every field of the food industry. Suitable for all scenarios from purchase to transportation, storage to manufacturing, and management. - Comes with a protective soft case and T-type thermocouple probe. - Utilizes thermocouple sensors to provide reliable results in a short measurement time. - Equipped with easy-to-understand keys and a large, easy-to-read display, ready for immediate use. - Food thermometer, sensors, and soft case are washable with running water, ensuring hygiene. - Complies with HACCP and meets EN 13485 standards.

• accessories

Since it is made of urethane leather, it can be easily wiped clean even if it gets dirty.

• others

● Variable magnification, straight-type scope with LED lighting The zoom function with a variable focal length allows for magnification changes from 30× to 50× / 70× to 100×. ● Erect image type for easy viewing like a loupe While typical microscopes produce inverted images, this product uses a Dach prism in its optical system, allowing for observation without image inversion. This makes it easy to handle and operate, similar to a loupe. ● Built-in 8-light high-brightness white LED illumination The bright LEDs illuminate the specimen, and the interior of the tube has a special anti-glare treatment, making it gentle on the eyes and providing a clear image.

• others

■Features ● Switchable between parallel/serial mode ● Automatically selects L/C/R parameters and measures in the optimal range ● Test frequencies: 100/120Hz, 1/10/100kHz ● Capable of measuring D (loss factor), Q (quality factor), and θ (phase angle) ● Ideal for measuring surface mount components with optional accessories ● Data editing on PC is possible via USB/RS232C connection

• Other measuring instruments

It can be rounded or folded for storage. Its bag-like structure prevents anything from falling out.

• others

It is a roller platform made of steel plate. The handle is detachable. Ground clearance is 67mm.

• Transportation System

The caster is a removable type secured with screws, making it easy to clean. The nylon urethane wheels popular in pharmaceutical factories feature stainless steel casters that are resistant to water.

• others

The MG20SR-H type has a fixed width, while the MG20SR-X type allows for width adjustment in three stages.

• others

Unlike general electronic humidity sensors, this one has extremely small aging changes, allowing for stable and highly reliable humidity measurements over long periods. Measurement values can be saved to the SD card of the indicator unit, enabling data analysis using spreadsheet software and other tools. The MC15K-5RAD-MR-KENTEI sensor is certified by the Meteorological Business Support Center.

• others

●Despite being a mechanical scale, it is characterized by high precision and a wide variety of weights that can measure from 10kg to 3t. ●There are models with wheels for easy mobility ("with wheels") and models that prevent the spring from stretching by putting the scale in a resting state ("resting model"). ●The MD10T-79-*ST type is suitable for fisheries and food processing sites.

• others

●High-Precision Thickness Measurement The M829T-7200FHN/M829T-7400FHN is a portable measuring device capable of accurately measuring thicknesses up to 10mm. Due to its compact and portable design, it can be used in manufacturing plants and quality inspection laboratories. The M829T-7200FHN/M829T-7400FHN can easily and accurately measure the thickness of non-magnetic materials, regardless of size, shape, or material, without causing damage. It is ideal for applications that require precise measurements of sharp corners, small radii, or complex shapes. ●Two Types of Models Available The M829T-7200FHN can display real-time measurement values, maximum and minimum values, and can be set to offset mode, automatically saving up to 100,000 measurement values. Additionally, it offers graphical display of statistical values, measurement trends, and storage of measurement data for 200 batches (automatically saving 240,000 measurement values across each batch, with each batch capable of storing up to 1,200 points).

• Rock drills, demolition machines, and excavators
• others

When not in use, the probe can be folded, so there is no worry about the probe breaking or damaging something with the probe. Simply opening the probe to a 30° angle turns on the power, allowing you to measure the center temperature of food. It is HACCP International certified and complies with EN13485 standards. The MD34TE-103T has an IP55 protection rating, protecting it from splashes of water. The MD34TE-104T has an IP65 protection rating, allowing it to be washed under running water after measurements are completed.

• others

It comes with an SD card, making data management easy. It is a multifunctional tester with features such as auto power off and backlight.

• others

We have prepared thermocouple types and thermistor types of sensors according to their applications. They are ideal for temperature management in food cooking, as well as in temperature management facilities for product control in laboratories and factories. They are also perfect for data management at construction sites.

• Waterproofing work

Easy to install and operate; anyone can quickly set up and operate it.

• others

A lineup of outer diameters from φ1.5mm to φ4.0mm for detailed observation scopes. It features a high field design that allows for extensive observation.

• Prime movers, torque converters, hydraulic equipment, generators

Ideal for daily static electricity management Bright and large color LCD display Measurement possible with simple button operation The head can rotate 180 degrees, with 5-stage hold at each 45 degrees. Easy measurement in tight spaces Measurement distance adjustment. The focus of the red LED light mark serves as a guide.

• others