奥村機械製作所 List of Products and Services

The "UCA-K300 model" is a cutting machine that allows for precise adjustment of cutting speed using an AC servo motor ball screw. The opening and closing of the table after cutting the material significantly improves the quality of the cut surface and the number of cuts. Cutting oil is sprayed onto the blade using an air mist system during cutting. 【Features】 ■ Cutting speed can be freely adjusted ■ Significant improvement in the quality of the cut surface and the number of cuts ■ Cutting oil is sprayed onto the blade using an air mist system during cutting *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ACPKF-300 model (front arm-less type)" is a fully automatic cutting machine equipped with an automatic fixed-length feeding device. The blade shaft travel guide uses linear ways, allowing it to maintain cutting accuracy over a long period. Additionally, stable cutting and material feeding are achieved through an air-hydraulic cylinder. We also handle the radial arm saw type "ACF-300 model." 【Features】 ■ The travel guide of the material feeding device uses hardened and polished guides and shafts, enabling precise feeding. ■ Stable cutting and material feeding are possible with the air-hydraulic cylinder. ■ The blade shaft operates on a belt drive system, allowing for heavy cutting by increasing the drive motor's horsepower. ■ The table surface is finished with hard chrome plating, minimizing scratches on the material. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "NRK-M type" is a fully automatic housing component groove processing machine designed for heavy cutting. With a powerful motor mounted on top and a belt drive system, the processing capability is enhanced, allowing for rapid heavy cutting. The tool axis travel guide uses LM guides to maintain precision over a long period. The front and rear travel of the tool axis is performed with stable cutting through either ball screw feed or air-hydraulic methods. 【Features】 - Capable of rapid heavy cutting - Processing cycle time is shortened due to the tool jump mechanism - Easy operation for anyone through a uniquely developed dedicated operation screen - Accurate positioning without cumulative error 【Other Features】 - The positioning operation screen comes standard with a large touch panel - By inputting the table feed pitch and cutting count in order of the processing steps using a numeric keypad, the table moves and cutting is performed in that order - The motor for table movement uses a servo motor - Three-speed shifting is possible: high, medium, and low - Table movement dimension measurement is performed using a magnetic scale, allowing for measurements in 0.1mm increments, maintaining precision semi-permanently.

• others

The "Mirror Cut FURK Type" is a running cut saw capable of precision cutting non-ferrous metal sheets (such as aluminum and copper) and composite materials from resin sheets to new building materials. With two cutting modes—single-position cutting and fully automatic cycle cutting—it enables efficient cutting operations. The cutting speed can be selected without steps to match the material being cut. Additionally, it features an easy-to-read and simple-to-operate LCD touch panel control system. 【Features】 ■ Capable of precision cutting from non-ferrous metal sheets and resin sheets to new building materials ■ Two cutting modes: single-position cutting and fully automatic cycle cutting ■ Beautiful cutting surfaces achieved through accurate running guides and high-precision spindles ■ Equipped with a powerful spindle motor ranging from 7.5 kW to 11 kW, tailored to the material being cut ■ Cutting accuracy achieved with measurements in 0.01 mm units for precise dimensional accuracy *For more details, please refer to the PDF document or feel free to contact us.

• others

The UCA-300 and UCA-400 models are specialized cutting machines designed specifically for cutting aluminum sashes, focusing on cutting speed and the quality of the cut surface. ■ UCA-300 Model Cutting Capacity: Height 145mm × Width 300mm ■ UCA-400 Model Cutting Capacity: Height 145mm × Width 400mm 〇 The circular saw is covered for safe operation, allowing the operator to perform cutting tasks with confidence. 〇 The dual-side clamps ensure secure clamping during cutting. 〇 The spindle is equipped with high-speed angular ball bearings suitable for aluminum, enabling high-precision rotation. The chips generated during cutting are collected through a φ150 duct hose connection to a dust collector (sold separately). Additionally, models UCA-300DC and UCA-400DC, which include a built-in simple dust collection system, have been added to the lineup.

• Aluminum sash

The "ACGII-A" is a semi-automatic circular saw cutting machine that can swing the radial arms left and right to make various angle cuts. The swing angle of the left and right arms can go up to 60°, and the axis tilt angle can be adjusted up to 45° to the right, making it ideal for cross-cutting long materials at an angle. The circular saw is positioned on a table and automatically passes the workpiece through using an air-hydraulic cylinder. Instead of moving the workpiece like a tilting table, the circular saw can be moved to match the cutting length while keeping the workpiece fixed. It can be placed along a wall when space is limited. The circular saw axis can be raised and lowered, allowing for groove processing as well. 【Features】 ■ Capable of making right-angle cuts, various angle cuts, and groove processing ■ The cutting tool feed guide shaft uses hardened and polished materials ■ Groove processing can be done by raising and lowering the circular saw axis Options: - Sliding back support ruler - Angle digital display - Rear chip collection cover *For more details, please refer to the PDF document or feel free to contact us.

• Gates, walls and fences
• Aluminum sash
• Aluminum fence/Iron fence

Three-dimensional cutting machine. It is a machine that can perform three-dimensional cutting by combining inclined cutting of wood and aluminum structural materials with rotary cutting along a travel rail, all in one cut. An auto-positioner (automatic length measuring device) can also be connected.

• Roof and gutter construction
• Structural Materials
• Woodworking machines, instruments, and tools

- This model is designed to reduce the effort and risk associated with mold changes. - It can perform end processing and intermediate processing of aluminum profiles. - Speed silent processing (20 times/minute). - The W-quick type can store two molds, improving work efficiency. - Compact and equipped with movable casters, it matches the layout of any factory.

• Garbage disposal, central dust collection, laundry, compressor