日本ヒーター List of Products and Services

We would like to introduce the "Inline Heater for Air Heating" handled by Nippon Heater Co., Ltd. This product heats the air or gas flowing through the piping line. By simply connecting it to a JIS standard flange, it can directly heat the gas without changing the flow path and can handle flow rates of up to 10m³/min. Additionally, we also offer the "Heater Controller T302 type with temperature overheat prevention function," which comes standard with temperature control, temperature anomaly detection, and heater overheat prevention features for heaters up to 3-phase 200V 10kW. 【Features of the Inline Heater for Air Heating】 ■ Easy installation in piping lines ■ Compatible with heating gases such as air and nitrogen ■ Usable outdoors ■ Equipped with K thermocouple for overheat prevention *For more details, please refer to the PDF document or feel free to contact us.

• Heat exchanger

We would like to introduce the "Inline Heater for Liquid Heating" handled by Nippon Heater Co., Ltd. This product can directly heat liquids without changing the flow path simply by connecting to JIS standard flanges. When connected to a 5K150A, it can handle a flow rate of up to 500L/min. Additionally, we also offer the "Heater Controller T302 Type with Overtemperature Prevention Function," which comes standard with temperature control, temperature anomaly detection, and overtemperature prevention features for heaters up to 3-phase 200V 10kW. 【Features of the Inline Heater for Liquid Heating】 ■ Easy installation on piping lines ■ Compatible with various liquids such as water, cleaning solutions, chemicals, and oils ■ Usable outdoors ■ Equipped with K-type thermocouple for overtemperature prevention *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

The "SHRM type" is a space heater designed for use with equipment operating at low voltages such as 24V and 48V. It is suitable for heating, insulation, and low-temperature measures in commercial equipment, inspection devices, analytical instruments, and research and experimental apparatus that operate at low voltages. Additionally, we accept custom orders, allowing for changes in voltage and power, heater material, dimensions and shapes, as well as modifications to the presence, position, and size of mounting holes. 【Specifications】 ■ Power supply: 24V, 48V ■ Lead wire: Glass braided coating 200mm ■ Material: SUS304 ■ Mounting holes: φ5, 2 locations ■ Heater thickness: Approximately 4mm ■ Heating element: Inside the mounting holes *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CTM type" is a cartridge heater designed for low voltage applications such as 24V and 48V. This heater is made to order. It is suitable for use in equipment such as commercial devices, inspection equipment, analytical instruments, and research and experimental apparatus for heating, maintaining temperature, and low-temperature measures at low voltage. There are various mounting methods for the cartridge heater, including "flanged waterproof type," "flanged with spring," "round flange," and "L type," among others (some options). 【Specifications】 ■ Power supply: 24V ■ Lead wire: Glass braided insulation 200mm ■ Outer diameter tolerance: + 0.1mm *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company offers custom-made "thermal insulation jackets" for heater parts of molding machines and heat exchangers, tailored to the temperature and shape of the equipment. We select suitable fabrics, sewing threads, and insulation materials based on temperature conditions, and manufacture them to fit the dimensions of the equipment, providing excellent energy-saving effects. They are easy to attach and detach, allowing for repeated use. They can withstand temperatures up to 1000°C. 【Examples of Applications】 ◎ Band heaters for extruders ◎ Shell-type heaters ◎ Valves ◎ Flanges ◎ Turbines ◎ Pumps ◎ Boilers ◎ Heat exchangers, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Heat exchanger

At Japan Heater, which manufactures heaters for liquid and air heating, we are currently offering a free gift of "Trivia on Far Infrared and Near Infrared" that explains information about "infrared" in an easy-to-understand manner for beginners! This book introduces the basics of infrared and the benefits of infrared heating, complete with graphs. It is a useful resource for understanding the fundamentals of infrared. 【Contents (Excerpt)】 ■ Definition of Infrared ■ Benefits of Infrared Heating ■ Various Laws of Infrared ■ Precautions for Infrared Heating *For more details, please refer to the PDF document. Feel free to contact us with any inquiries.

• others

The heater element uses an all-stainless steel sheath heater, achieving safety, durability, and long life with minimal dust generation.

• Other civil engineering works

It is a simple and robust structure that combines a proven joint-type duct heater DC model with commercially available blowers. It is an electric heater that provides odorless and clean warm air.

• Foundation construction
• Air compressors, blowers and pumps
• others

The "Stainless Small Submersible Heater YDSS Type" is a heater for liquid heating. The part that comes into contact with the liquid is made entirely of stainless steel, and the power cord is covered with a stainless steel flexible tube, allowing the entire tube to be submerged in the liquid, making it ready for use without any modifications to the tank. The cord exit section rises at a right angle, making it even more space-saving than the YDS type. You can use a larger capacity heater in the same space as before. The standard model can quickly heat various liquids up to 100°C. In addition to the standard model, which can be prepared in a short lead time, various custom models can also be manufactured. [For more details, please download the catalog or feel free to contact us.]

• others

The MTS type comes with a cover and also has a heater lamp. Additionally, it is double insulated, making it safe.

• Heating and cooling equipment and facilities

It is compact and easy to install. It has a built-in manual reset thermostat for preventing temperature rise inside the terminal box. The heater pipe is made of SUS304, making it robust and long-lasting. It is used for preheating and preventing freezing of various equipment and components. It can be used as a heat source for small heating devices and dryers.

• others

Water or aqueous solutions in buckets, tanks, bathtubs, or drums can be easily and directly heated by simply throwing them in from above with a small installation area, making it convenient for hand washing in testing, prototyping, experiments, and temporary sites. The heater material is SUS316L, which is also resistant to corrosion.

• Other civil engineering works
• others

At Japan Heater, heaters are classified into categories for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

• others

At Japan Heater, heaters are classified into those for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

• others

At Japan Heater, heaters are classified into categories for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

• others

In Japan, heaters are classified into categories for liquids, air (gases), and metals. We have compiled usage examples, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

• others

At Japan Heater, heaters are classified into categories for liquids, air (gases), and metals. We have compiled examples of use, shapes, product introductions, and precautions for each application, so please refer to them. In addition to heaters, we also handle temperature control and regulation devices. If you provide us with your detailed specifications and budget, we will propose a heating system that includes the optimal heater controller. ● For more details, please download the catalog or contact us.

• others

"Hot Flex" is a sheath heater that can be easily shaped into various forms. It has enough flexibility to be bent by hand into a sheath pipe. The installation method involves bending it to fit the metal groove and simply embedding it with a plastic hammer. Like conventional sheath heaters, it can be applied to various heating systems. [Features] ■ Can be bent into arbitrary three-dimensional shapes ■ Easy to replace and excellent maintainability ■ Available in two outer diameters: φ8.5 and φ6.5 ■ Heater lengths range from 300 to 1500 mm in 25 variations ■ Requires fewer units, making wiring simple *For more details, please download the catalog or contact us.

• Water and sewerage pipe fittings

The GT5 type heater features a heating element made of stainless steel (SUS316L) with a diameter of 48.6mm. Its simple shape makes it resistant to scale buildup and easy to clean. It is used for heating cleaning solutions that are difficult to clean or heavily soiled. 【Features】 ○ Heater for heating in water, oil, and cleaning solutions ○ Sister product of the GA5 type heater For more details, please contact us or download the catalog.

• others

The PLT5 type heater features a heating element made of a stainless steel (SUS316L) tube with an outer diameter of 48.6mm. Compared to the GA5 type screw-in heater and the PL5 type plate flange heater, which use standard outer diameter 12mm sheath heater elements, the heater element is cylindrical and has a simple shape. This makes it less prone to scale (deposits and contaminants that precipitate and adhere from the heated liquid) and easy to clean. It can be used for heating cleaning liquids that are difficult to clean or heavily contaminated. 【Features】 ○ Easy installation with standard flange ○ Flange size is JIS5K 50A ○ Resistant to scale For more details, please contact us or download the catalog.

• others

The "SOP type" oil preheater is a heater that warms low-quality oil to make it more flammable. It has a built-in thermostat with a scale of 30 to 110°C. 【Features】 ○ Compact, lightweight, and high performance ○ Easy temperature adjustment with the built-in thermostat Variable dial with a scale of 30 to 110°C ○ Direct connection without an electromagnetic switch ○ ON-OFF control of the heater with the built-in thermostat For more details, please contact us or download the catalog.

• others

Stainless Steel Submersible Heater "YDS Type" comes with a waterproof tube covering the power cord, allowing it to be submerged in liquid without any modifications to the tank, making it ready for immediate use. The structure is also filled with ceramic powder in a stainless steel pipe, making it strong and highly durable. 【Specifications】 ○ The power cord is standard at 3.5m (the waterproof tube is 2m), with a plug included. ○ A 70×70 plate is attached to prevent the heating element from coming into contact with the tank (with two supports). ○ Please use at a continuous operating temperature of 50 degrees Celsius or lower. For more details, please contact us or download the catalog.

• others

The titanium submersible heater "YDT type" has a waterproof tube covering the power cord, allowing it to be submerged in liquid without any modifications to the tank, making it ready for immediate use. Its structure features titanium pipes filled with ceramic powder, providing high corrosion resistance even in corrosive liquids such as seawater. 【Specifications】 ○ The power cord is standard at 3.5m (including a 2m waterproof tube) with a plug included. ○ Equipped with a 70×70 plate to prevent the heating element from contacting the tank (at two locations). ○ Please use at a continuous operating temperature of 50°C or lower. For more details, please contact us or download the catalog.

• others

The "YSL type" is a heater designed to maintain the temperature of the internal liquid in large tanks (primarily to prevent freezing). The control box consists of a leakage circuit breaker, electromagnetic contactor, electronic temperature controller, etc. Once the power is connected and the temperature is set, temperature control can be achieved immediately. The installation method involves inserting the heater from the top of the large tank and securing it with a mounting flange. It can be used outdoors. 【Specifications】 ○ Power supply: 3-phase 200V ○ Dimensions → H: allowable range of +10mm, -10mm → L: allowable range of +0mm, -10mm ○ Material → Flange: SUS304 JIS5K150A → Heater: SUS316L OD12 surface polished → Terminal box: SS blue painted ○ Watt density: 3W/cm² For more details, please contact us or download the catalog.

• others

The far-infrared paint drying machine "ADT-51αL" demonstrates excellent effects on putty, two-component primer (undercoat), water-based primer, and topcoat paint (10:1 to 2K). Since the wavelength of infrared is very close to the thermal absorption rate of the paint film, there is minimal reflection on the surface, allowing for efficient and rapid drying of the entire paint film. It exhibits outstanding thermal absorption properties for two-component urethane paints, thermosetting paints, powder coatings, and water-based paints. 【Features】 ○ Outstanding thermal efficiency ○ Simple operation and work procedures ○ High work efficiency ○ Excellent safety For more details, please contact us or download the catalog.

• others

The "QA type" air high-temperature heater is a cylindrical heater that supports a heating element wrapped with nichrome wire around a ceramic insulator, using quartz glass. The protective tube (case) is a stainless steel pipe with heat dissipation holes. 【Features】 - The heater part has an extremely compact structure. - The hot air outlet is made of quartz glass, providing excellent heat resistance. - Depending on the shape of the object to be heated, three types of outlets can be selected: straight round, flat, and spot types. - It has a fast startup, allowing high temperatures to be blown out in a short time after switching on. For more details, please contact us or download the catalog.

• others

The "GAA5 type" screw-in heater for air heating features a low watt density (2.5W/cm2) and is designed for air heating with a screw-in style. 【Features】 ○ The gas contact part is made of stainless steel, ensuring cleanliness. ○ It is plug-type, making installation and replacement easy. ○ It provides the desired power in a small space. For more details, please contact us or download the catalog.

• others

The QIR-type heater is a "lamp heater" developed to utilize near-infrared radiation. It has a fast heat-up time and can obtain very clean energy due to its structure. The peak of its radiation energy spectrum is between 0.9 and 1.6 micrometers, making it effective for non-contact heating, especially in vacuum heating applications. 【Specifications】 ○ Shape: Standard is straight → Custom products will be made for shapes other than straight ○ Heater element outer diameter: OD10mm ○ Lead wire: Glass braided silicone-coated wire (LG wire) length 200mm For more details, please contact us or download the catalog.

• others

Aluminum cast heaters are made by casting a sheath heater, providing good thermal conductivity and uniform heating. They are used when you want to effectively utilize the tank or vessel, especially when direct heaters cannot be inserted due to risks of ignition or corrosion. They are mounted on the bottom or sides of the vessel and provide indirect heating from the outside. There is no need to drain the liquid for maintenance. The heater mounting surface is machined. 【Product Lineup】 ○ Aluminum Cast Heater ALC Type ○ Aluminum Embedded Heater ALF Type ○ Aluminum Plate Heater ALP Type For more details, please contact us or download the catalog.

• others

The "CCD type" case-style drum can heater is a robust, movable heater for drum cans, equipped with insulation and temperature control. It is designed for heating and maintaining the temperature of contents in 200-liter drum cans, making it easier to extract high-viscosity liquids and solidified materials. 【Features】 - The main heater is equipped with casters, allowing it to be set up without moving the drum can. - It has a sturdy metal case designed for use on-site. - It comes with a digital temperature control unit that allows for precise control of any desired temperature. - Standard insulation minimizes heat loss. - It includes a leakage circuit breaker for enhanced safety. For more details, please contact us or download the catalog.

• others

The micro heater "MC type" is a sheath tube type heater that wraps around metal surfaces for indirect heating. It is thin, flexible, and can withstand temperatures up to 500°C. 【Features】 - Flexible and compact! Easy installation - Easy to bend and can be installed in complex locations - Fast temperature rise of the heater and high thermal efficiency For more details, please contact us or download the catalog.

• others

The "RG type" mantle heater wraps heating wires covered with glass fiber tightly with glass cloth along with insulation material, and is sewn with glass fiber threads. It flexibly fits laboratory glassware such as flasks, beakers, and funnels. If you specify the shape as a custom order, it can be sewn to fit vacuum pumps, vacuum chambers, valves, special tanks, piping, and other shapes. This heater flexibly fits and can easily heat and maintain the temperature of any shape. 【Specifications】 - Power supply: Single-phase 100V - Lead wire: Length 400mm - Insulation: Thickness 20mm - Heat resistance temperature: Continuous use 350℃ (momentary 450℃) For more details, please contact us or download the catalog.

• others

The ribbon heater "RR type" is a strip heater that is used along areas where heating or insulation is needed. The heating element, covered with fiberglass, is securely sewn onto glass fabric and then wrapped and sewn with an outer layer of glass fabric. There are two sewing methods: single stitch (S) and double stitch (W). A mounting "cord" (made of fiberglass) is sewn onto it. It can be fixed simply by wrapping it around pipes and tightening it with the cord. The standard heat resistance temperature is 350°C. Custom products for high temperatures (heat resistance temperature of 700°C) can also be manufactured. 【Specifications】 ○ Thickness: t=2mm ○ Length of cord: 500mm ○ Lead wire: standard 500mm (nickel wire) ○ Heat resistance temperature: 350°C ○ Power terminal: For 100V: plug (parallel 15A) For 200V: M4 round terminal For more details, please contact us or download the catalog.

• others

The "RSD/RSDP type" drum, pail, and one-gallon can heating heater is designed to facilitate the easy extraction of high-viscosity liquids and solidified materials contained in drums. By heating substances such as grease, asphalt, paint, wax, oil, varnish, chocolate, paraffin, and butter inside the can, the viscosity can be reduced, allowing for the liquid to be drawn out. This also minimizes the capacity required for the suction pump. 【Types】 ○ For heating drum cans: RSD-11PSE ○ For heating pail and one-gallon cans (common use): RSDP-10PSE For more details, please contact us or download the catalog.

• others

The digital temperature control device "monoOne-120T" is a temperature control unit that allows for easy temperature regulation. It is compact and easy to carry, making it convenient for use in laboratory experiments and factory maintenance. The power switch (ON-OFF), indicator light, temperature control, and temperature display are all integrated, so only the connections for power, heater, and sensor are needed. 【Features】 ○ High precision temperature control is possible with PID control ○ Auto-tuning function is included as standard ○ Temperature monitoring function allows for simultaneous display of two temperatures → Includes over-temperature prevention function ○ Timer function enables automatic ON or OFF ○ Equipped with alarm output For more details, please contact us or download the catalog.

• others

Self-regulating code heater "TLT type / HTLT type" is a heater cable composed of semiconductor heating elements arranged in a continuous parallel circuit, which has a self-temperature control function. The heating element automatically adjusts its heat output in response to changes in its own temperature. The power per meter (W/m) remains the same regardless of where it is cut. 【Features】 ○ Safe and economical due to automatic adjustment of output ○ Easy to install; can be cut to the required length on-site, and the heater power per unit length (W/m) is the same regardless of where it is cut → However, a separately sold "terminal processing kit" is required for cutting and use ○ The insulation material coating is excellent in water resistance and chemical resistance ○ Can be overlapped For more details, please contact us or download the catalog.

• others

The silicone rubber heater "RSP type" is a heater that can be easily attached for insulation and heating of containers with complex shapes. Silicone rubber heaters are flexible and lightweight, and they excel in heat resistance and cold resistance compared to other organic rubbers. 【Features】 ○ A flexible, thin surface heating element that replaces metal heaters ○ Can be fitted to curved surfaces and cylinders, allowing for good heat conduction and high efficiency For more details, please contact us or download the catalog.

• others

The "V-type" band heater is a heater designed to heat cylindrical objects. It can provide wide surface heating according to the shape of the object being heated and can be manufactured in various custom shapes. It is widely used for heating resins in injection molding machines and extrusion machines, as well as in hot presses. 【Features】 ○ Can provide wide surface heating according to the shape of cylindrical or tubular objects ○ Custom-made, can be manufactured in various shapes including hole processing and box shapes For more details, please contact us or download the catalog.

• others

The bolt heater (special cartridge heater) "CTB type" can significantly reduce gaps and leaks between metal parts when they are attached with bolts. It is used for large bolts to prevent loosening in high-pressure turbines and similar applications. 【Features】 ○ Attaches metal parts with bolts, greatly reducing gaps and leaks between metals. ○ By cutting off the power to the heater and allowing it to cool, the bolt contracts, significantly reducing gaps and leaks between metals. ○ Used for large bolts in high-pressure turbines and other applications. For more details, please contact us or download the catalog.

• others

The silicone cord heater "RSC type" is a heater in which the heating wire is integrally molded with silicone rubber. It boasts excellent electrical insulation, heat resistance (up to 180°C), and cold resistance (down to -30°C), ensuring high safety. Additionally, it is highly flexible, allowing for close attachment to any shape. 【Features】 ○ A heater for insulating and heating pipelines and tanks ○ The range of electrical resistance R [Ω] for heater production is from 10Ω/m to 5000Ω/m ○ Custom products can be manufactured beyond the model number For more details, please contact us or download the catalog.

• others

The "RSD/RSDP type" heating heater for drum cans, pail cans, and one-gallon cans is designed to easily extract high-viscosity liquids and solidified materials from drum cans. By heating substances such as grease, asphalt, paint, wax, oil, varnish, chocolate, paraffin, and butter inside the can, the viscosity can be reduced, allowing the liquid to be drawn out. This also minimizes the capacity required for the suction pump. 【Specifications】 ○ Compliant with the Electrical Appliance and Material Safety Law (PSE) ○ The power cord is standard at 2 meters, with a plug (for single-phase 100V) ○ Can be installed with one touch using fastening fasteners and fittings For more details, please contact us or download the catalog.

• others

The "QIA type" infrared heater with a reflective hood emits infrared rays, allowing for quick heating, drying, and curing of the target object without warming the air in between. Additionally, the reflective hood enables irradiation only in the forward direction. Since the heater surface is not treated with coatings, there is no concern about peeling, making it safe for use in food-related applications. 【Specifications】 ○ The irradiation part is made of opaque quartz. ○ Comes standard with a stainless steel reflective hood. ○ Installation should be horizontal as a principle. For more details, please contact us or download the catalog.

• others

The "SHH-UT type" heater for installation inside control panels is designed to be mounted inside the control panel to protect it from moisture and condensation, while maintaining a high level of electrical insulation resistance. Since the heater and the mounting legs are integrated, there is no need to create separate legs for installation, making it very convenient. The mounting hole can be doubly insulated with the included bushing insulator, ensuring safety. 【Specifications】 ○ Power Supply/Voltage: 100V/200V, Single Phase ○ Material: Bonded Steel Plate → Additionally, custom products in SUS304 and SUS430 are also available. ○ Installation: Uses bushing insulator BSN-16 For more details, please contact us or download the catalog.

• others

The "CTA type" cartridge heater is a compact, rod-shaped heater designed to heat air and gas. It is ideal for applications such as duct heaters, heating devices, heat sources for industrial equipment, and heating of air and other gases. It can also be applied to shell-type heaters integrated into casings. 【Features】 ○ Ideal for situations where there are constraints on the dimensions of containers or installation locations and where a compact heater is desired. ○ Best suited for heating gases in piping with low flow rates. ○ Superior in terms of electrical safety, pressure resistance, and applicability to various atmospheres compared to heaters with exposed nichrome wire. For more details, please contact us or download the catalog.

• others

The "IRP type" clean heater is a panel-type heater made of stainless steel, which combines far-infrared radiation ceramic heaters into a unit that allows you to choose the size and capacity. It has no dust-generating elements, is resistant to thermal shock, and excels in cold and heat cycle resistance. 【Specifications】 ○ Each panel can be used with a ceramic heater element with a power supply voltage of 200V and a power of 400W (100mm x 200mm). ○ The porcelain (ceramic) is coated with glaze (far-infrared radiation ceramics). ○ The continuous operating temperature is 500 degrees Celsius. For more details, please contact us or download the catalog.

• others