ホトロン List of Products and Services

We install vehicle detection sensors suitable for the scale and method of coin parking, such as gate type, flap type (lock type), gate-less, and flap-less (lock-less), providing real-time occupancy information. This ensures accurate occupancy displays for safe coin parking operations.

• Accessories around the opening
• Other measuring instruments

For managing occupancy in small parking lots, the "space management system," which installs sensors in each parking space to display availability with higher accuracy, is recommended. In small parking lots, maneuvering vehicles can be difficult, and if a driver mistakenly enters, they may have to back out, leading to customer stress and potential accidents. Therefore, by installing sensors in each parking space to ensure accurate occupancy displays, we can reduce unnecessary entries of new vehicles and achieve safe parking lot operations. ■ Target Products - Vehicle Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic type) - Vehicle/Pass Detection Sensor HM-LC6 (Relay type, Loop coil type) - Vehicle Detection Sensor HM-LC7/LC7-FLS (Communication type, Loop coil type) - Vehicle/Pass Detection Sensor HM-S6 (Buried type, Magnetic type) - Vehicle Detection Sensor HM-S8 (Exposed type, Magnetic type) ■ Introduction video for Vehicle Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Accessories around the opening
• Other measuring instruments

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spots, enabling efficient parking lot operations. In large parking lots, there are two main management methods: the "floor management method/block management method," which emphasizes cost reduction, and the "parking space management method," which prioritizes high accuracy. The floor management method/block management method involves installing sensors at specific points to count and manage the number of vehicles passing through. This method is easy to install and cost-effective. The parking space management method involves installing sensors in every parking space, allowing for individual management of each vehicle, thus achieving highly accurate parking management. ■ Target Products - Vehicle Count Sensor CCS2 (Ceiling-mounted, Infrared type) - Occupancy Detection Sensor HM-UX2/UW2 (Ceiling-mounted, Ultrasonic type) ■ Introduction video for the Occupancy Detection Sensor HM-UX2 https://youtu.be/5tzrBAykAqU?si=EwSLqE9WYoolaNCy

• Accessories around the opening
• Other measuring instruments

The "HM-LC7/LC7-FLS" is a vehicle detection sensor using a communication-type loop coil system. The loop coil sensor is a simple vehicle detection system formed by a coil and a controller. It detects general vehicles in parking lots and traffic management systems. Since each detector is connected via communication lines, it places less burden on installation compared to relay types. It can be configured for up to 100 parking spaces. 【Features】 ■ Loop coil type detector aimed at general vehicles ■ Vehicle detection results are reported to the payment machine via communication (RS-485) ■ Configurable for up to 100 parking spaces ■ Less installation burden compared to relay types due to communication line connections ■ Flap plate can be raised or lowered based on communication instructions from the payment machine (only for HM-LC7) ■ HM-LC7-FLS is designed for flapless (no locking plate) use ◎ For more details, please contact us or download the catalog.

• Other measuring instruments

"KABUTO" is an industrial sensor designed for installation at heights ranging from 3.5m to 6.5m. It features a long-range radar and a wide infrared area as a combination sensor. It detects only the desired direction through its directional detection function. 【Features】 ■ IP65 industrial sensor ■ Detects the entry and presence of packer trucks at waste disposal sites ■ Monitors trouble spots at merging locations from a high vantage point ■ Alerts to potential contact accidents involving forklifts within factories ■ Capable of monitoring from a height of 6.5m, with settings adjustable via remote control ■ Ensures stationary detection in a wide infrared area; directional management is possible when used across the entire area ■ Manages lateral directionality with cross-traffic functionality ■ Simple installation and initial setup ◎ For more details, please contact us or download the catalog.

• Safety Supplies
• Other measuring instruments

The "HM-S8" is an exposed type park sensor that does not require installation and is less affected by natural environments such as rain and snow, as well as geomagnetic influences. It is installed next to the flap plate, so no installation is required during construction. The vehicle detection results are reported to the payment machine via communication (RS-485). 【Features】 ■ Less affected by natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IPX7 ■ Does not detect humans or animals ■ Installed next to the flap plate (no installation required) ■ Usable without a flap (passage is not allowed) ■ Cables available in 1.5M and 2M ■ Achieves high-accuracy occupancy management in small parking lots *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables
• Parking lot facility construction
• Safety Supplies

The seismic sensing device "HK-2" is a product that can automatically perform various pre-set controls when it detects strong shaking equivalent to a seismic intensity of 5 weak or higher. For example, it can automatically execute actions such as: "Open the automatic doors to secure an escape route" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers and release emergency supplies" "Automatically play pre-set audio guidance" 【Product Features】 ■ Detection sensitivity can be set to four levels (equivalent to seismic intensity 5 weak to 6 weak) ■ Detection output hold time: 2 seconds, 10 seconds, 30 seconds, 60 seconds, 5 minutes, 30 minutes, 60 minutes, ∞ ■ Operation status can be understood through LED lighting and blinking ■ Easy to use in a wide range of scenarios with a DC 12-24V specification ■ Compact and easy to install. Recovery is also simple with a reset switch *Please refer to the accompanying materials. Feel free to contact us with any inquiries.

• Facility Management System
• Other measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 Clinic 【Challenge】 There was a staff waiting room right next to the automatic door, and every time staff went to the waiting room, they triggered the sensor area, causing the automatic door to open and close unnecessarily. 【Solution】 Non-contact type light touch sensor HA-T401 【Effects After Installation】 Although we considered switching to a touch type, by using a non-contact light touch sensor, staff can use the automatic door without touching it, eliminating unnecessary opening and closing, which has been beneficial. ◎ Please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Store 【Challenge】 There was an issue where a counter was located near the automatic door, causing the detection range of a typical infrared sensor to overlap. 【Solution】 Non-contact mounted light touch sensor HA-T401 【Effects After Installation】 The non-contact light touch sensor has a compact detection range, allowing the door to open and close without interference from the counter. ◎ Please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Store 【Challenge】 There was a challenge in that a sign was located directly above the automatic door, preventing the installation of a sensor that is typically mounted on the front. 【Solution】 Built-in beam touch sensor HA-T520 【Effects After Installation】 The HA-T520 is a type that is built into the door frame, allowing the sensor to be installed without being obstructed by the sign, thus resolving the issue. ◎ Please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 General Store 【Challenge】 In a building with a focus on aesthetics, we wanted the sensor installed on the automatic door to be inconspicuous. 【Solution】 Non-visible built-in optical touch sensor HA-T520 【Effects After Installation】 The non-visible built-in sensor is installed under the non-visible area, maintaining the aesthetics of the building. Additionally, its non-contact design also contributed to infection control measures. ◎ Please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

We would like to introduce a case study of the latest automatic door sensor from Hotron. 【Installation Location】 Store 【Challenge】 Touch switches were used for the automatic doors, but many customers touched them upon entering, leading to a need for infection control measures. 【Solution】 Built-in infrared touch sensor HA-T520 【Effects After Installation】 By using a non-contact infrared touch sensor, customers can enter without touching, reducing anxiety about infections. ◎ Please feel free to download the catalog or contact us.

• Accessories around the opening
• Other measuring instruments

The "HA-T Series" is a non-contact automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. The sensor's detection range can be set in four configurations: left, center, right, and 12 spots, allowing for customization based on the automatic door's usage environment. 【Features】 ■ Four spot settings tailored to the automatic door's usage environment ■ Non-contact and hygienic opening and closing achieved through a light touch sensor ■ Reduces unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy savings ■ Two types of light touch sensors are available: "non-vision mount type" and "non-vision built-in type" ■ The "non-vision built-in type" features a flat design that remains inconspicuous when mounted on the door *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Automatic door opening and closing devices for entrances and exits (auto doors)

The "HA-T520" is a non-contact light touch sensor suitable for buildings that prioritize aesthetics and for places that require a narrow detection range. Being a built-in type without visible openings, it maintains the aesthetic appeal of the building and contributes to energy-saving measures and infection control by reducing unnecessary door openings with its light touch function. When the light touch function is turned OFF, it can also be used as a built-in infrared sensor with a wide detection range. 【Features】 ■ Non-contact and hygienic ■ Flat design that preserves the aesthetics of the entrance ■ Four detection range settings to adapt to various door types ■ Two-stage detection condition settings to reduce unnecessary door openings and contribute to energy savings ■ Can also be used as an infrared sensor with a wide detection range *For more details, please refer to the PDF materials or feel free to contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)

Energy-saving measures and infection control! Upgrade your facility environment with a non-contact light touch sensor! The 'HA-T401' can be configured to match the usage environment with four settings for the touch area: left, center, right, and a total of 12 spots in four configurations. You can open and close automatic doors just by bringing your hand close, making it hygienic and safe without any contact. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Four spot settings to adapt to various door types ■ Non-contact solution to hygiene issues ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Security Sensor Systems
• Door Accessories

The "HA-T401" is an automatic door sensor that opens only for people who want to enter without contact, whether on a busy street or in a narrow passageway. Depending on the usage environment, the touch area can be set to four spots on the left, center, and right, or a total of twelve spots in four different configurations. The automatic door can be opened and closed simply by bringing a hand close, ensuring hygiene and peace of mind without physical contact. When the light touch function is turned off, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Adaptable to various door types with four different spot settings ■ Addresses hygiene concerns with a non-contact design ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Security Sensor Systems
• Door Accessories

The "PHW-03B" is an automatic liquid spray dispenser that detects when a hand is extended and sprays disinfectant. When combined with a wireless touch switch, it can wirelessly link to automatic doors. When the liquid is sprayed, a signal is sent to open the automatic door, ensuring thorough hand sanitization. 【Features】 ● The number of liquid sprays can be selected to either one or two. ● Compatible bottle size: Maximum approximately D85×W95×H185–250mm. You can use both the dedicated bottle and your own bottles. ● Recommended for entrances to restrooms in food-related facilities and factories where hygiene management is required. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Entrance/Exit Gate System

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux, accommodating various situations from passage to occupancy. It is recommended for use at the opening and closing of waste treatment facility doors, as well as for gates and outdoor parking applications where vehicles pass through. It can also be installed on rebar or steel plates. 【Features】 ■ Less susceptible to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism ■ Protection rating IP68 to reduce water ingress ■ Ten times the load capacity compared to conventional embedded park sensors (based on our comparison) ■ Can distinguish between vehicles even when they pass continuously, one by one ■ Can be installed on rebar or steel plates *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Parking lot facility construction
• Safety Supplies

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We will address various concerns and challenges you may have. 【Challenge】 We want to ensure that only residents of the apartment can call the elevator to prevent unauthorized access. 【Solution】 Install a facial recognition device so that only registered individuals can call the elevator. ◎ Please feel free to contact us.

• Entrance and exit control system
• Entrance/exit management and personal identification system
• Security cameras and surveillance systems

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and for calling them. We address various concerns and challenges you may have. 【Challenge】 We want only staff to be able to call the elevator in facilities for dementia patients. 【Solution】 Install a facial recognition device so that only registered individuals can call the elevator. ◎ Please feel free to contact us.

• Entrance and exit control system
• Entrance/exit management and personal identification system
• Security cameras and surveillance systems

The Hotron automatic door sensor can be used not only for automatic doors but also for opening and closing elevators and calling them. We address various concerns and challenges you may have. 【Challenge】 I often have my hands full with luggage, so I want to use my foot to call the elevator. 【Solution】 Place your foot on the foot switch to call the elevator. ◎ Please feel free to contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

The Hotron automatic door sensor can be used not only for automatic doors but also for the opening and closing of elevators and calling them. We address various concerns and challenges you may have. 【Challenge】 I want to call the elevator without pressing the buttons, which are prone to viruses and bacteria. 【Solution】 Wave your hand over the non-contact switch to call the elevator. ◎ Please feel free to contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

Recently, there has been a growing focus on non-contact switches as a measure against viral infections. To prevent contact infections from doors and elevators that are touched by many unspecified individuals, non-contact solutions are being sought. 【Implementation Location】 Department Store 【Issue】 There have been accidents where people's hands get caught near the elevator doors, and we want to announce "The elevator is arriving. Please step back" when someone approaches the door. 【Solution】 Install an infrared sensor in the elevator, which will announce through a speaker when a person enters the area. 【Product to be Introduced】 Non-vision type infrared sensor HA-400 Hotron's automatic door sensors can also be used for the opening and closing of elevators and for calling them, in addition to automatic doors. We are here to address your various concerns and challenges. ◎ Please feel free to contact us.

• Accessories around the opening
• Other measuring instruments

Recently, there has been a growing focus on non-contact switches as a measure against viral infections. To prevent contact infections from doors and elevators that are touched by a large number of unspecified individuals, there is a demand for non-contact solutions. 【Installation Location】 Office Building 【Challenges】 - We want to install anti-pinch sensors because carts can get caught in the service elevators. - The previously installed beam sensors cannot detect carts that pass through, leading to pinch incidents. 【Solution】 Install infrared sensors in the service elevators to prevent the doors from closing when people or objects enter the area. 【Product Introduced】 Built-in infrared sensor HA-520 Hotron's automatic door sensors can also be used for the opening and closing of elevators and for calling them, in addition to automatic doors. We are here to address your various concerns and challenges. ◎ Please feel free to contact us.

• Accessories around the opening
• Other measuring instruments

Hotron's [Face Recognition and Non-Contact Entry and Exit Management System] can be utilized to enhance security in apartments and offices, as well as for infection control measures. The product lineup includes a "non-contact switch" that allows doors to be opened and closed simply by waving a hand without touching doorknobs or switches, an "automatic disinfectant spray" that dispenses disinfectant automatically, and a "high-speed face recognition device" equipped with deep learning capabilities. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. [Biometric Authentication Devices] ○ Face Recognition Terminal DS342 (Compact Design) ○ Face Recognition Terminal DS372F (Felica Compatible) [Automatic Disinfectant Spray] ○ Automatic Disinfectant Spray PHW-03B (Linked to Automatic Doors) [Non-Contact Switch] ○ Microwave Hand-Waving Sensor DHS-1 ◎ For more details, please download the catalog or contact us.

• Entrance and exit control system
• Entrance/exit management and personal identification system
• Security cameras and surveillance systems

The "DS Series" is a high-speed facial recognition device that achieves faster facial recognition with high accuracy. Facial recognition speed is under 0.2 seconds, with an accuracy of over 99%! It can be used in various locations such as medical facilities, public facilities, environmental facilities, educational institutions, and office buildings, reducing the risk of virus and bacteria transmission as an entry and exit system. You can choose from three types according to your location and purpose. ■ Product Lineup 【Facial Recognition Terminal DS342】 - High-speed facial recognition with deep learning - Compact smartphone size - Supports mask recognition 【Facial Recognition Terminal (Felica compatible) DS372F】 - High-speed facial recognition with deep learning! Equipped with a Felica card reader - 7-inch tablet size ◎ For more details, please download the catalog or contact us.

• Entrance and exit control system
• Entrance/exit management and personal identification system
• Security cameras and surveillance systems

Introducing a case of implementing a non-contact switch in a medical facility! **Challenges Before Implementation** To prevent the occurrence and spread of hospital infections, we decided to install new automatic partition doors in the existing building. We wanted the doors to not open just by passing nearby and did not want to operate them with a touch switch. We were recommended a non-contact switch that only requires waving a hand without touching. **Product Introduced** Non-contact switch "PF-R5" - A hand-waving sensor that opens and closes the door when the built-in beam switch's light is obstructed, with easy adjustment for fine angle settings. - Beam switch angle can be adjusted in three patterns: front, downward, and sideways! - Hygienic since there is no direct contact with the switch! - Waterproof and dustproof structure. **Effects After Implementation** The direction of hand waving can be changed, allowing for usage that fits actual operational needs.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

Introducing a case study on the implementation of a non-contact switch in a food factory! **Challenges Before Implementation** The aisles were narrow, and there were instances where the door would open when workers passed close to the sensor, necessitating an urgent adjustment of the area from facing forward to downward. **Product Introduced** Non-contact switch "PF-R5" - A hand-sensing sensor that opens and closes the door when the beam switch's light is obstructed, with easy adjustment of fine angle settings. - Beam switch angle can be adjusted in three patterns: front-facing, downward, and sideways! - Hygienic since it does not require direct contact with the switch! - Waterproof and dustproof structure. **Effects After Implementation** The direction of the arrow on the sensor surface indicates where to place your hand, making it easy to understand that it is a switch. Area adjustments were very simple and could be done easily by removing the cover, which was extremely helpful.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

The "Microwave Non-Contact Switch DHS-1 for Automatic Doors" is a microwave hand-sensing sensor that allows you to open and close doors simply by waving your hand. It is suitable for places that prioritize hygiene, such as food factories, hospitals, and nursing facilities. 【Features】 - Reduces the risk of virus infection as doors can be opened and closed without contact. - The adoption of microwave technology significantly reduces malfunctions caused by condensation in environments with temperature differences, such as cold storage. - Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water. *Note: The wall surface (back side) is not applicable. - LED display and response sound allow for easy confirmation of detection status at a glance. For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

The "foot switch" can be operated at your feet to open and close automatic doors. It is widely used in food processing factories, kitchens in hotels and restaurants, as it allows both hands to be free. Even with large work sandals, the "PF-01S" or "PF-03S," which have a wide opening, can open and close automatic doors. It reduces the risk of virus and bacterial infections in places like food factories and dining facilities where hygiene is a concern. 【Features】 ○ Reduces the risk of virus infection as doors can be opened and closed without touching ○ Allows hands to be free as it can be operated at your feet to open and close automatic doors ○ Suitable for places like food factories and dining facilities where hygiene is a priority ○ Prevents unnecessary detection due to the switch mechanism ◎ For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

It is a non-contact switch that allows you to operate and open/close automatic doors with your feet, freeing up both hands and ensuring excellent hygiene. The "PF-01S" is a slim vertical beam type foot switch with a wide opening. Its slim design allows for the installation of two foot switches at the same height, both inside and outside. The stainless steel panel is highly water-resistant and chemical-resistant, making it hygienic. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

The "foot switch" can be operated at your feet to open and close automatic doors. It is widely used as a sensor in operating rooms, allowing both hands to be free. Even with large surgical sandals, the "PF-01S," which has a wide opening, can open and close automatic doors. It reduces the risk of virus and bacterial infections in places like hospitals and medical facilities where hygiene is a concern. 【Features】 ○ Reduces the risk of virus infection as doors can be opened and closed without touching them. ○ Allows for hands-free operation of automatic doors at your feet. ○ Suitable for places like hospitals and medical facilities where hygiene is a priority. ○ Prevents unnecessary detection due to its switch mechanism. ◎ For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

The "hand wave sensor" allows you to open and close doors simply by waving your hand, making it hygienic! This non-touch sensor enables you to wave your hand without touching the main unit in places where hygiene is a priority. Unlike regular touch switches, there is no worry about battery depletion. By adjusting the sensitivity, you can fine-tune the detection range to suit the specific environment. It reduces the risk of virus and bacteria transmission in places where hygiene is important, such as food factories, medical facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus transmission as doors can be opened and closed without contact. ○ A wide variety of options available based on application and location. ○ Ideal for places where hygiene is a concern, such as food factories and medical facilities. ○ Switch mechanism prevents unnecessary detection. 【Recommended for the following locations】 - Factory facilities: Used in food processing factories' ingredient storage rooms. - Dining facilities: Used in kitchens of hotels and restaurants. - Care facilities and medical institutions: Used in automatic doors of care facilities, operating rooms in hospitals and medical institutions. - Environmental facilities: Used in clean rooms of environmental facilities. ◎ For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching doorknobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism ◎ For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacterial infection. The "PF-R1" is a front-facing type of hand-sensing sensor. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

You can open and close doors without directly touching doorknobs or switches, reducing the risk of viral infection in places where hygiene is a concern, such as food processing facilities and hospitals. The "PF-U2" is an exposed type horizontal hand-sensing sensor. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria infection. The "PF-R4" is an easy-to-use exposed downward wide-type hand-sensing sensor. By placing your hand under the sensor, you can open and close the door. It is suitable for places that require hygiene considerations, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Accessories around the opening
• Other measuring instruments

The "Exposed Waterproof Non-Contact Beam Switch for Automatic Doors PF-R5" is a hand-sensor that easily adjusts fine angle settings, and opens and closes the door when the beam of the built-in switch is obstructed. It is suitable for hygienic environments such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact - Three patterns of beam switches: front, downward, and left/right - Waterproof and dustproof (IP55 design) - Arrow mark indicates where to wave your hand - Can be mounted on a power switch box For more details, please download the catalog or contact us.

• Automatic door opening and closing devices for entrances and exits (auto doors)
• Audio equipment
• Ski related facilities

From lightweight doors to large commercial facilities and office buildings. This automatic door sensor maintains a stable high-density area even with tall doors, ensuring safety while achieving an ideal entrance with a sense of openness. It is available in various types: surface-mounted, built-in, bottom-mounted, and ceiling-mounted. It features doorway monitoring capabilities, making it suitable for entrances in industrial facilities. Additionally, it allows for adjustments in width and depth by one row each, enabling precise detection ranges tailored to the site while maintaining high density. For more details, please contact us or download the catalog.

• Accessories around the opening
• Other measuring instruments

The bed exit sensor/motion call "Ugo-kun" is also useful for preventing falls in the restroom. When a patient stands up from the toilet seat, the plate detaches from the main unit and notifies via the nurse call system. This motion call product offers excellent cost performance; when not in use, turning the switch OFF will prevent the call from being activated even if the plate is detached. It is compact and easy to install. We have transformed the traditional box shape into a pastel pink, round egg shape for a fresh image. The plate has also been changed from black to white, with added thickness to allow for a customizable feel! Please note that there are no changes to the model number, functions, or price due to this design change. ◎ For more details, please contact us or download the catalog.

• Safety and consumables
• others

Bed Exit Sensor / Body Movement Call "Ugo-kun" notifies the nurse when the patient's upper body rises from the bed, causing the plate to detach from the main unit. It is a cost-effective body movement call product that does not trigger a call when the switch is turned OFF, even if the plate is removed. It is compact and easy to install. For more details, please contact us or download the catalog.

• Safety and consumables
• others

The "Just Place It Pole-kun" is an infrared reflection type off-bed sensor that can adapt to various environments. It detects when someone stands up from the toilet and helps prevent falls in the restroom. Being wireless reduces the risk of cable disconnection and moving out of the detection range. It is also less likely to detect curtain movements or bedding overhangs, thereby minimizing false alarms. 【Mat Sensor】 The risk of falls may actually increase because the individual may try to avoid it. 【Conventional Infrared Sensors】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the individual. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the top of the pole. ■ Simple design with only two switches. ■ The sensor is wireless, making it non-contact and hygienic. ■ The operation and base parts are at a height that is less prone to dirt and are antibacterial. ■ False alarm reduction feature (less likely to detect curtain movements or bedding overhangs). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables
• others

The "Just Place It Pole-kun" is a bed-exit sensor that can detect not only when a patient leaves their bed but also when they leave the room by being installed at the entrance of the hospital room. When installed at the entrance, it detects the timing when the patient leaves the room and notifies via the nurse call system. Since it is wireless, it reduces the risk of cable disconnection and leaving the detection range. It is also less likely to detect curtain movements or bedding overhangs, thereby minimizing false alarms. 【Matt Sensor】 In fact, patients may try to avoid it, which can increase the risk of falls. 【Conventional Infrared Sensors】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the patient. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the pole head. ■ Simple design with only two switches. ■ The sensor is wireless, ensuring non-contact and hygienic use. ■ The operation part is at a height that is less prone to dirt, and the base part is antibacterial. ■ False alarm reduction feature (less likely to detect curtain movements or bedding overhangs). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables
• others

The "Just Place It Pole-kun" is a suitable bed-exit sensor for preventing falls and accidents in hospitals and nursing facilities. It can be freely installed according to the layout of the room and the timing of detection desired. By using Just Place It Pole-kun, we have received feedback that the risk of tripping over or avoiding mat sensors has decreased. Since it is wireless, the risk of cable disconnection and exiting the detection range is also reduced. 【Mat Sensors】 The risk of falling actually increases because the individuals tend to avoid them. 【Conventional Infrared Sensors】 Setting the detection range, installation, and operation is difficult. 【Just Place It Pole-kun】 - It uses infrared, making it less noticeable to the individuals. - Installation is complete just by placing it! It has a simple design with only two operation switches. 【Features】 ■ Easy installation by simply placing it according to the direction of the arrow on the top of the pole. ■ Simple design with only two switches. ■ The sensor is wireless, making it hygienic and non-contact. ■ The operation and base parts are antimicrobial and at a height that is hard to get dirty. ■ False alarm reduction feature (less likely to detect curtain movement or bedding overhang). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables
• others

"Just Place It Pole-kun" is an infrared reflection type floor sensor that can adapt to various environments. When the individual gets out of bed, it notifies via a nurse call. Because it is wireless, it reduces the risk of cable disconnection and leaving the detection range. It is also less likely to detect curtain movements or bedding overflow, thus minimizing false alarms. 【Mat Sensor】 The individual may try to avoid it, which actually increases the risk of falling. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the individual. - Installation is complete just by placing it! It has a simple design with only two operation switches. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables
• others