パンドウイットコーポレーション日本支社 List of Products and Services

This is a non-laminated label for cable identification. It can be used for flag-type displays of wires. For more details, please contact us or download the catalog.

• Wiring devices
• others
• Power distribution and control panels

This is a label that can be used for various purposes. It is suitable for display on flat surfaces such as various devices, printed circuit boards, and distribution panels. For more details, please contact us or download the catalog.

• others
• Power distribution and control panels

The destination of the electric wire is printed, and by starting to wind from the printed part and covering it with the transparent part, the printed characters are laminated to prevent them from fading, and they are also protected from dirt, solvents, and oils. Please refer to the recommended cable sizes listed in the catalog for the appropriate cable size for the labels you will use. Displaying is also possible after terminal termination. For more details, please contact us or download the catalog.

• Wiring devices
• others

Labels for laser printers are made using the most suitable materials for each label format. We offer various label formats such as self-laminating labels, component labels, non-laminated labels, and labels for optical fibers, utilizing the characteristics of materials like polyester, polyvinyl fluoride, polyolefin, polyester (without adhesive), and paper to provide products that meet our customers' needs. The print quality may be affected by the printer model, settings, and compatibility with the toner used. Please check the suitability in actual use cases beforehand. We provide product samples upon request. Please request them through our website. The backing size for laser printer labels is letter size (except for some labels). For more details, please contact us or download the catalog.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

The innovative label design allows the label to be rotated after being attached to the cable, enabling the display content to be checked from any angle. Position adjustments are also possible, allowing for a visually appealing alignment of the display. Labels can be easily attached without removing cables that are already installed on the equipment. It is ideal for use in densely packed cable areas. An external roll stand (TDP43ME-RS) is required for 3-inch labels. ~ Free Sample Giveaway Campaign ~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Wiring devices
• others

The destination of the electric wire is printed, and by starting to wind from the printed part and covering it with the transparent part, the printed characters are laminated to prevent them from disappearing, and they are also protected from dirt, solvents, and oils. Please refer to the recommended cable sizes listed in the catalog that are suitable for the labels you will use. Displaying is possible even after terminal termination. An external roll stand (TDP43ME-RS) is required for 3-inch label roll cores. For more details, please contact us or download the catalog.

• Wiring devices
• others

You can easily create labels using the included Easy-Mark(TM) label printing software and your own computer. It can be used for rotating labels, self-laminating labels, blank labels, marker plates, and more. It is lightweight and compact in size. 【Compatible Labels】 Self-laminating labels, blank labels, heat shrink tube markers, marker plates, rotating labels, nameplate labels, etc. For more details, please contact us or download the catalog.

• Safety and consumables
• others

The "Non-Laminated Label" for dot printers is a non-laminated label for cable identification. It is made of a flexible material that can be wrapped around cables for display and can be used as a flag-type display for wires. The material is excellent in oil resistance and abrasion resistance, using vinyl cloth that can be reapplied without leaving adhesive residue when removed. By creating labels yourself, you can accommodate "small quantities and diverse varieties" with "short delivery times." Panduit Corporation offers a variety of label types compatible with different printers, delivering products that provide customers with trust and satisfaction. For more details, please contact us or download the catalog.

• others
• Power distribution and control panels

Labels for thermal transfer printers are made using the most suitable materials for each label format. We offer various label formats such as self-laminating labels, rotary labels, and component labels, and we provide products that meet customer requirements while utilizing the characteristics of materials like polyvinyl fluoride, vinyl, polyester, and paper. We recommend using our TDP43ME/E thermal transfer printer along with the corresponding genuine ribbons. If you choose to use a thermal transfer printer from another manufacturer, we suggest conducting a printing test with our labels. Additionally, to optimize print quality, please select the appropriate ribbon based on the material of the labels you will be using. For more details, please contact us or download the catalog.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

By using the label printing software Easy-Mark(TM), you can quickly and easily create destination labels for cables and identification/management labels for various devices. It enables cable labeling and device identification in markets such as industrial equipment, distribution boards, construction/maintenance, data centers, and network applications. You can display the printing results directly on the screen and work while checking the actual printing image. It is equipped with an import function for data and symbols from Excel, allowing you to use existing data as is. Label paper information provided by Panduit is pre-registered, significantly reducing the time and cost involved in label creation. For more details, please download the catalog or contact us.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

The "Component Label," designed for dot matrix printers, is a label that can be used for various purposes. It is suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution panels. We offer products made from materials such as polyester, vinyl cloth, and polyvinyl fluoride. By allowing customers to create their own labels, we can accommodate "small quantities and diverse varieties" with "short delivery times." Panduit Corporation offers a range of label types compatible with various printers, delivering products that provide trust and satisfaction to our customers. For more details, please contact us or download the catalog.

• others
• Power distribution and control panels

**How to Use Self-Laminating Labels** Attach the printed part of the label horizontally to the cable, and wrap the label around the cable using the pads of your fingers. Once you cover the printed part with the transparent laminate section and stick it down, you’re done. **How to Use Rotating Labels** Hold the non-adhesive part in the center of the label and peel it off the backing. Stick the adhesive part (anchor) at the top of the label onto the cable. Make sure to attach the label straight to the cable. Wrap the label around the cable and rotate it in the direction you wrapped it. The anchor part will separate from the label. The label can be rotated and slid. By raising the non-adhesive part of the anchor, it can serve as a stopper for the label. If not needed, please remove it. For more details, please download the catalog or contact us.

• Wiring devices
• others

The "self-laminating label" for dot printers allows you to print destinations for wires and starts wrapping from the printed area, covering it with a transparent section to ensure that the printed text does not fade. It also protects against dirt, solvents, and oils. Displaying information is possible even after terminal finishing. We offer products made from materials such as vinyl, polyolefin, and polyvinylidene fluoride. Please choose the most suitable product from our extensive lineup. *For the appropriate cable size for the labels you will use, please refer to the recommended cable sizes listed in the catalog. For more details, please contact us or download the catalog.

• Wiring devices
• others

【Cable Display Labels】 In addition to being durable and resistant to peeling, we offer labels that protect cable displays and printed surfaces, easily rotatable and movable labels for better visibility, flag-type display labels suitable for thin cables, and labels ideal for densely packed cables. We also have types that can display a lot of information on thin cables and those that can clearly display tags or plates on thick cables. 【General Display Labels】 We provide a wide variety of labels, including product nameplates, connector displays, displays for ultra-adhesive rough surfaces, IC displays, reflow-compatible labels, nameplates for switches (suitable for outdoor use), customizable labels with specified widths, labels for proof of removal, and network labels. For more details, please download the catalog or contact us.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

The RoHS directive was enacted by the European Union (EU) in July 2006 and regulates the use of six hazardous substances (lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) in electrical and electronic equipment sold throughout Europe. The products listed in our current catalog, with the exception of certain items such as bundling tools, lockout/tagout devices, and harness board accessories, comply with the RoHS directive. For more details, please download the catalog or contact us.

• Label printer

UL969 involves attaching labels or label substrates to a test plate and conducting tests such as visual inspection, readability, abrasion, and adhesion to achieve certification. Therefore, for the labels you intend to use to be UL certified, they must meet certain conditions regarding the label substrate, printer, ribbon, toner, material of the surface to be adhered, and usage environment. Panduit offers various UL-certified substrates, certified under UL certification file numbers MH14576 and MH14979. (Only the heat shrink tube marker (GMUHS31) is certified under the flame-retardant UL224 with UL certification number E205133.) For further details, please download the catalog or contact us.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

○ Pipe markers, voltage markers, and various types of signage markers can be created in label widths as needed. ○ Limited to use on flat surfaces. There are multiple types available for each material, so please inquire. ● For more details, please download the catalog or contact us.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

○This label is ideal for terminal block displays. ○It can be used for terminal blocks with a display height of 4.8mm to 9.7mm. ●For more details, please download the catalog or contact us.

• others
• Power distribution and control panels

○ This tape has excellent reflective properties, improving visibility in dark places. ○ It is limited to use on flat surfaces. ● For more details, please download the catalog or contact us.

• Power generation equipment
• Water and sewerage pipe fittings
• others

Labels for dot printers are made from the most suitable materials for each label format. We offer self-laminating labels, component labels, and non-laminated labels, providing products that meet customer requirements while utilizing the characteristics of materials such as vinyl and polyolefin. The printing performance/results may vary depending on the model of the dot printer. We recommend conducting a print test with your printer. Additionally, please verify the suitability for your actual usage in advance. We provide product samples upon request. Feel free to contact us through our website for your request. For more details, please contact us or download the catalog.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

The heat shrink tube marker is a heat shrink tube marker label for cable identification. It can be printed directly on the heat shrink tube, making insulation, protection, and display easy. The material used is polyolefin, with a shrink ratio of 3:1. The operating temperature range is from 135°C to -55°C, offering excellent heat resistance and flame retardancy. We offer a comprehensive lineup of products, including heat shrink tube markers for single-sided printing and double-sided printing. *The products comply with the printing performance requirements of "MIL-M-81531," "MIL-STD-202F Method 215A," Solution A, C, and D. For more details, please contact us or download the catalog.

• others
• Power distribution and control panels

The labels for label cores are self-laminating labels specifically designed for label cores. They are made of vinyl and, when used with label cores, display a large amount of information through optical fibers. The operating temperature range is from 66°C to -40°C. By creating labels yourself, you can accommodate "small quantities and a wide variety" and "short delivery times." Panduit Corporation offers a wide range of label types compatible with various printers, allowing you to choose products that meet your needs. For more details, please contact us or download the catalog.

• Wiring devices
• others

Peeling off the attached label will cause it to tear, preventing opening or rewriting. The material is polyester, and it is a highly heat-resistant label with a temperature range of 150°C to -40°C. For more details, please contact us or download the catalog.

• others

The network label, designed for thermal transfer printers, is the ideal label for network devices. It is suitable for displaying network equipment such as patch panels, faceplates, and punch-down blocks. The material used is adhesive-free polyester, with a temperature range of 150°C to -23°C. For more details, please contact us or download the catalog.

• Wiring devices
• glue
• Power distribution and control panels

●This is a heat shrink tube marker label for cable identification. ●It can be printed directly on the heat shrink tube, making insulation, protection, and display easy. *The product meets the printing performance requirements of MIL-M-81531, MIL-STD-202F Method 215A, Solution A, C, and D.

• others
• Power distribution and control panels

The flame-retardant halogen-free marker plate for thermal transfer printers is used for labeling thick cables. It can be installed after wiring. It is made of halogen-free flame-retardant polyurethane film (material code: GMPU), with a temperature range of 90°C to -40°C. For more details, please contact us or download the catalog.

• Water and sewerage pipe fittings
• others
• Power distribution and control panels

The marker plates, which are labels for thermal transfer printers, are suitable for displaying large-diameter cables. They can be installed after wiring and are usable in harsh environments. The material is polyolefin/polyester, and the operating temperature range is from 105°C to -50°C. We offer a wide variety of colors, so you can choose a product that meets your needs. For more details, please contact us or download the catalog.

• Water and sewerage pipe fittings
• others
• Power distribution and control panels

The nameplate label, designed for thermal transfer printers, is a switch display label for distribution boards and similar applications. It has strong adhesive properties even on rough surfaces and powder-coated surfaces. The thickness is enhanced by microcellular foam (thickness: 0.8mm). It is durable and highly resilient, allowing for permanent displays suitable for both indoor and outdoor use. We offer a comprehensive lineup of nameplate labels for push buttons and distribution boards. For more details, please contact us or download the catalog.

• others
• Power distribution and control panels

The flag-shaped labels for thermal transfer printers can secure a wide display space on thin cables such as fiber optic cables. Thanks to a unique design for installation, you can choose to either fix the label to the cable or rotate/move it after installation. The material used is polyester, and the operating temperature range is from 150°C to -40°C. For more details, please contact us or download the catalog.

• Wiring devices
• others
• Power distribution and control panels

The non-laminated labels for thermal transfer printers are non-laminated labels for cable identification. They are made of flexible material and can be wrapped around cables for display. They can be used for flag-type displays of electrical wires. We offer a wide range of products made from materials that excel in oil resistance and abrasion resistance, such as vinyl cloth that can be repositioned, and nylon cloth that has excellent heat resistance. For more details, please contact us or download the catalog.

• Wiring devices
• others
• Power distribution and control panels

The component labels, designed for thermal transfer printers, are labels that can be used for various applications. They are suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution panels. We offer a wide range of products made from various materials, including vinyl cloth that is excellent in oil resistance and abrasion resistance and can be repositioned, as well as polyimide that excels in solvent resistance and is suitable for use at high temperatures. For more details, please contact us or download the catalog.

• Wiring devices
• Water and sewerage pipe fittings
• Power distribution and control panels

In devices that wire a large number of wires and cables, as well as in communication wiring work, neglecting cable identification and destination labeling can lead to serious troubles due to human errors, such as incorrect connections during maintenance or modification work. Additionally, since wiring is often used for long periods, it is also important to maintain the quality of the labels to prevent degradation of printed characters due to friction, chemicals, heat, and other factors. Panduit's cable identification labels include self-laminating types that protect the printing, flag types that can print many characters even on thin cables, and rotating labels that are highly visible and can be rotated for better visibility, offering various shapes and materials suited for different applications and environments. We are currently providing samples free of charge. Please feel free to contact us.

• Safety and consumables
• others

The modular plugs from Panduit, known for their "H" shaped latches, are recognized as the industry standard for their high reliability and workability.

• Wiring devices
• Internet System

This catalog features a wide range of "cable ties" handled by Panduit Corporation. It includes products from the "standard type" to the "weather-resistant type," which is less prone to degradation from ultraviolet rays and suitable for outdoor use, as well as the "super heat-resistant type," which is suitable for environments involving high temperatures and chemicals. [Contents (partial)] ■ Material selection guide ■ Pan-Ty standard nylon 6.6 type ■ Pan-Ty special material type ■ Pan-Ty special shape type ■ Stainless steel claw type *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices
• Work tools
• Water and sewerage pipe fittings

"We offer a range of products from manual types to pneumatic types, as well as fully automatic models." <Product Examples> Fully automatic bundling tool… Can supply, tighten, and cut bundling bands in just 1 second. Enables continuous bundling, which helps reduce costs. Weighs only 800g, reducing operator fatigue. *We have many other products available. For more details, please download the catalog.

• Work tools
• Water and sewerage pipe fittings

■ Excellent heat resistance [Continuous use: -60℃ to +260℃] ■ Has a wide range of chemical resistance ■ Excellent flame retardancy (UL94V-0) [Oxygen index 24−35] ■ Low water absorption (0.5%) ■ Self-lubricating and excellent wear resistance ■ Excellent radiation resistance [Gamma ray resistance: 10MGy] ■ Suppresses the generation of toxic gases during combustion ■ Low outgassing

• others
• Power distribution and control panels

Panduit's cable ties "Super Grip" offer the following advantages compared to conventional products: - They are thinner and more flexible, which increases work efficiency. - The cable and tie are closely adhered, preventing slippage due to increased tightening. - Easy threading and tightening with one hand, enhancing usability. - Available in a total of 16 different types! *You can download a catalog with details of each size. ■□■ We are currently offering free samples! ■□■ If you are interested, please request from the box below. We will send you a free sample set. Take this opportunity to experience the incredible ease of use!

• Wiring devices
• Water and sewerage pipe fittings