松本機械販売 List of News Articles

The Matsumoto Machinery Group can provide cloth that is compliant with HALAL certification. ▼For more details, click here▼

I've uploaded an article titled 'What is a Centrifuge in 1 Minute!'. I've made it as simple as possible so it can be read in one minute. I would be happy if those who are wondering 'What exactly is a centrifuge!?' could take a look!

We have renewed the content of the basic knowledge of centrifuges! The content has changed from before, so we would be happy if you could check it again! Thank you!

【Exhibition Participation - INTERPHEX Week 2024 Tokyo Pharma Lab EXPO-】 ◆ Dates June 26, 2024 (Wednesday) to June 28, 2024 (Friday) 10:00 AM to 5:00 PM ◆ Location Tokyo (Tokyo Big Sight) ◆ Booth East Hall 7, Booth Number [51-58] ↓ For exhibited products, venue map, and visitor registration, please refer to the details below. Our sales representatives will be on-site to assist with any inquiries regarding centrifuges. We look forward to your visit!

- Filter the thick liquid that serves as the base for the medicine using a centrifuge to create powdered medicine. - Remove the oil from snack foods to make them crispy and low-calorie. - Filter the thick sauce base using a centrifuge to create powdered seasoning for cup noodles. You can use it in various other applications like these! For more details, please visit the link.

We received an inquiry from Company N, which manufactures molybdenum and tungsten processed products, stating, "We want to increase processing capacity by updating existing equipment, but the ceiling height is low. Additionally, we want to address the issue of liquid dripping during the liquid supply, as it causes contamination." After discussing the details, we proposed side discharge to reduce the height of the centrifuge and the installation of a hood to prevent liquid dripping. The installation of the centrifuge inside the building was completed without any issues, and we received feedback that there were no more liquid drips and that quality had improved. ▶ For more details on the case, please follow the link.

We received an inquiry from Company F, a pharmaceutical company that manufactures active ingredients and intermediates, stating that they would like to implement a system that is capable of automatic operation and can efficiently and reliably improve cleaning efficiency and verification during product changeovers. By adopting our centrifuge, they reported a reduction in operator workload, a decrease in cleaning time, and less vibration, which has received high praise. ▶For more details on the case, please follow the link.

We received an order for a full recovery centrifuge, FLOWM, from Company O, which specializes in the manufacturing of pharmaceuticals and their intermediates, as well as contract synthesis. They expressed a desire to fully recover the product due to its high drug price and to focus on design aesthetics. After several discussions regarding specifications, we proceeded with the order. ▶ For more details, please follow the link.

We received an inquiry from Company M, a machinery manufacturer, stating, "We would like to improve the situation where waste oil is leaking from the chips after cutting processes in factories in various Asian countries." The oil attached to the metal chips generated during the cutting process was leaking from the piled-up chips, leading to soil contamination and odor issues. They consulted us to consider improvements, and we proposed and delivered the M-type centrifugal separator for chip de-oiling. After the introduction of the centrifugal de-oiling machine, passing the chips through the M-type centrifugal separator allowed for the recovery of almost all the attached oil, eliminating any leakage from the chips, and successfully resolving the issue. ▶ For more details, please follow the link.

We received an inquiry from Company S, which manufactures and sells fibers, stating that they wanted a centrifuge capable of cleaning and dewatering chemical fibers. We proposed our top discharge centrifuge. As a result of using our centrifuge, they were able to significantly reduce the dewatering time by skimming and recovering the liquid that was difficult to remove after the introduction of the centrifuge. ▶ For more details, please follow the link.

"We want to increase the filtration speed of materials that are prone to clogging." When Company I, a food manufacturing manufacturer, considered using a centrifuge for filtration in their commercial dashi production line, they consulted us, saying, "Among several types of dashi, there are some that clog the filter cloth during filtration, resulting in poor filtration performance, so we want to find a way to increase the processing speed." In response, we proposed and delivered a specification that combines a skimming device, which is originally installed on a non-perforated wall basket machine, with a perforated wall basket. This allows for the simultaneous separation of the supernatant liquid by specific gravity while draining liquid from the filter cloth. As a result of using our centrifuge, after its introduction, we were able to significantly reduce the drainage time by skimming and recovering the liquid that was difficult to remove. ▶ For more details, please refer to the link.

A valve manufacturer, Company K, expressed their desire to increase the oil removal rate from cutting chips, stating, "Currently, we are using the Matsumoto Machinery oil remover M-1, but we want to increase the oil removal rate further." In response, we proposed placing the M-0 under the M-1 for the centrifugal separator for cutting chip oil removal. After sending us the cutting chips and conducting internal tests, they confirmed that the oil removal rate increased, and we proceeded with the delivery. After the introduction of the second centrifugal oil remover, it became possible to further increase the oil removal rate compared to before. ▶ For more details, please follow the link.

We received an inquiry from Company D, a chemical manufacturer, stating that "the filter cloth replacement is cumbersome every time, and we want to prevent contamination caused by the fibers of the filter cloth." They have ordered the MARK3β, which allows for the installation of an electronic beam screen and sintered metal filter media that does not require filter cloth replacement! ◆ For more details, please follow the link.

We received an inquiry from the research facility of pesticide manufacturer K, and they evaluated the high cleaning performance of the casing opening and closing mechanism and the flat-type basket, leading to their order. ▶For more details, please refer to the link.

We would like to inform you that our Tokyo Sales Office has relocated to the address below as of February 26, 2024. Taking this opportunity to move, we will strive to further enhance our services and meet your expectations, and we kindly ask for your continued support. 【New Address】 6th Floor, Sansei Headquarters Building, 2-14-9 Ningyocho, Chuo-ku, Tokyo 103-0013 TEL: 03-5801-9925 FAX: 03-5801-9928 *Please note that our phone and fax numbers have also changed.

We received an inquiry from Company D, which manufactures and sells pharmaceuticals, asking if we had a lab centrifuge that considers design and handling characteristics. We proposed the LAC-2000 type E, an improved version of our LAC-2000 model, and they placed an order with us. We developed a modular design that thoroughly considers workflow, cleanability, appearance, and footprint through trial and error with our technical department and users. ▶ For more details, please follow the link.

We received a request from Company Z, which manufactures numerous pharmaceuticals and active pharmaceutical ingredients, stating, "We would like to deliver a centrifuge that complies with GMP standards and can be confidently shown during inspections to our new plant." As a result, they adopted the JMP-S horizontal centrifuge. We received feedback that using our centrifuge has led to a reduction in the workload for operators, improved the efficiency of cleaning for multiple products, and enhanced the efficiency of verification. Recently, the reduction of operator burden and the cleanability of machines have become pressing issues, and pharmaceutical manufacturers must address these concerns. JMP is capable of providing solutions for these challenges, and we have received repeat orders since our initial delivery. ▶ For more details, please follow the link.

We received an inquiry from a pharmaceutical company involved in drug manufacturing, stating that they would like to introduce a GMP-compliant centrifuge with DI (Data Integrity) capabilities. We proposed our DMNβ model, and they placed an order with us. Our company provides centrifuges that are more suitable for drug manufacturing by equipping them with a system based on the ALCOA principles, which includes not only operational information of the centrifuge but also logs of operator actions and the granting of login and operational permissions based on security levels. ▶ For more details, please follow the link.

"We would like to reduce the recovery cost of stainless steel polishing powder and prevent spontaneous combustion." We received an inquiry from Company H, a metal processing company, asking if a centrifuge could be used to reduce the recovery cost of stainless steel polishing powder and prevent spontaneous combustion. Please refer to the link for specific solutions.

1: Proposal ability 2: Perseverance without giving up 3: Sense of speed We asked customers who have actually been using our centrifuges for a year to directly share the reasons why they chose us. Please check the details below. Centrifuges are essential equipment for producing our customers' important products, so we strive to provide quality and service that can be used with confidence!

The Matsumoto Machinery Group declared in July 2021 that it would actively engage in information security measures by committing to the one-star "Five Principles of Information Security." ▶For more details, please check the link below.

We received an inquiry stating, "We have a plan to increase production, and since changing filter cloths takes time and manpower, we would like to eliminate the hassle of changing filter cloths." Therefore, we proposed the MARK 3β, which features an electronic beam screen that does not require filter cloth changes and an easy-to-clean casing opening mechanism. As a result of using our centrifuge, it has become possible to improve production efficiency through labor reduction and shortened production time. You can check the details of our proposal at the link below.

We would like to express our heartfelt sympathy to all those affected by the Noto Peninsula earthquake in Reiwa Year 6, as well as their families. We sincerely pray for your safety and for the swift recovery of the disaster-stricken areas. The Matsumoto Machinery Group has started its operations for 2024 today, January 5th. We look forward to your continued support this year as well.