ロブテックス List of Products and Services

- Two-color molded resin grip designed for easy handling - Air supply port is interchangeable left and right - Long stroke (R2A1: 19mm, R2A2: 25mm) - Protective cover attached to the cylinder cup - Equipped with a mandrel protrusion prevention shutter

• Work tools

- Achieve comfortable work with high-speed fastening and high output - Industry's fastest level of rivet fastening cycle time

• Work tools

- Easy automatic rivet supply - Achieves stable rivet supply of more than one every three seconds! - Operates solely on electricity, contributing to energy savings!

• Work tools

Compatible with the same size vise before renewal (model numbers B50 to B300).

• Work tools

- Forging, machining, and heat treatment that determine the performance of the crab clamp are conducted in-house. With the backing of technology, you can use it with peace of mind for a long time. - High-precision square screws minimize play, allowing for smooth opening and closing. - The dish's swivel angle is 15 degrees (excluding B25 and B38), firmly securing the workpiece on a flat surface. - The separately sold dish set is compatible with the same size clamps before the renewal (part numbers B50 to B300). - If the dish part comes off, it can be economically repaired compared to replacing the entire unit.

• Work tools

- Easily remove spatter without taking the nozzle off the welding torch body. - Weld spatter stuck to the nozzle can be easily scraped off. - Frequent spatter removal prolongs the life of the nozzle and contributes to cost reduction. - By attaching it to a ratchet handle, speedy work is possible.

• Work tools

An Ebinut is a type of blind nut that allows for the easy creation of a nut section (female thread) from one side on difficult thin plates or closed sections where access to the back side is not possible. - Easy nut section formation with Ebinut - No complicated setup or operation is required, making it easy for anyone to install the Ebinut - The included Ebinut is made of NAK aluminum (small flange)

• Work tools

Insulated Crimp Terminal/Open Barrel Terminal Use 〇 Environmentally friendly and gentle material Uses elastomer for the grip part 〇 Wire cutter 〇 Insulated terminal crimping jaws (1.25, 2, 5.5 sq) 〇 Open barrel terminal crimping jaws (plug terminal 1.25, 2 mm²) * Please use the jaws for wire insulation stops with INS. 〇 Wire stripper (applicable size 0.75 to 5.5 sq) 〇 Bolt cutter (applicable size M2.6 to M5) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

For open barrel terminals 〇 Environmentally friendly materials Uses elastomer for the grip part 〇 Open barrel terminal crimping jaws (for plug terminals 1.25, 2 mm²) * Please use the jaws for wire insulation stops with INS. 〇 Wire cutter 〇 Wire stripper (applicable size 0.75 to 5.5 sq) 〇 Bolt cutter (applicable size M2.6 to M5) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

For insulated crimp terminals 〇 Environmentally friendly and gentle materials Uses elastomer for the grip part 〇 Insulated terminal crimping jaws (1.25, 2, 5.5 sq) 〇 Wire cutter 〇 Wire stripper (Applicable size 0.75 to 5.5 sq) 〇 Bolt cutter (Applicable size M2.6 to M5) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

(P.B) Sleeve Use 〇 Environmentally friendly and gentle materials Uses elastomer for the grip part 〇 For bare crimp terminals, P.B sleeve crimping jaws (1.25, 2, 5.5 sq) 〇 Bolt cutter (Applicable sizes M2.6 to M5) 〇 Wire cutter 〇 Wire stripper (Applicable sizes 0.75 to 5.5 sq) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

Insulated crimp terminals / bare crimp terminals (P.B) for sleeves 〇 Environmentally friendly material, with elastomer used in the grip part 〇 Wire cutter 〇 Open barrel terminal crimping jaws (for plug terminals 1.25, 2 mm²) 　※ Please use the jaws for wire insulation stops with INS. 〇 Bolt cutter (suitable size M2.6 to M5) 〇 Crimping jaws for bare crimp terminals and P.B sleeves (1.25, 2, 5.5 sq) 〇 Wire stripper (suitable size 0.75 to 5.5 sq) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

Open barrel terminal / bare crimp terminal (P.B) sleeve use 〇 Environmentally friendly material, using elastomer for the grip part 〇 Wire cutter 〇 Open barrel terminal crimping jaws (insert terminal 1.25, 2 mm²) 　※ Please use the jaws for wire insulation stop with INS. 〇 Bolt cutter (applicable size M2.6 to M5) 〇 Crimping jaws for bare crimp terminals and P.B sleeves (1.25, 2, 5.5 sq) 〇 Wire stripper (applicable size 0.75 to 5.5 sq) 〇 For automotive maintenance 〇 For telephone and telegraph wiring 〇 For factory maintenance 〇 For audio, television, and other home appliances 〇 For crafts and various hobbies

• Work tools

Eco Pack Aluminum Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a durable resin case! 〇 Significantly increased lineup in both material and size! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for storing parts or small items for other purposes 〇 You can purchase only the amount you need!

• Work tools

Eco Pack Aluminum Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a sturdy resin case! 〇 Significantly increased lineup in both material and size! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for parts storage or small item storage, etc. 〇 You can purchase only the amount you need!

• Work tools

Eco Pack Steel Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a sturdy resin case! 〇 Significant increase in both material and size lineup! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for parts storage or small item storage 〇 You can purchase only the amount you need!

• Work tools

Eco Pack Steel Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a sturdy resin case! 〇 Significantly increased lineup in both material and size! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for parts storage or small item storage, etc. 〇 You can purchase just the amount you need!

• Work tools

Eco Pack Steel Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a sturdy resin case! 〇 Significant increase in both material and size lineup! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for parts storage or small item storage, etc. 〇 You can purchase only the amount you need!

• Work tools

Eco Pack Steel Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a durable resin case! 〇 Significantly increased lineup in both material and size! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for parts storage or small item storage, etc. 〇 You can purchase only the amount you need!

• Work tools

Eco Pack Stainless Steel Body 〔ECOLOGY〕 Comes in a reusable resin case 〔ECONOMY〕 Affordable small quantity pack 〇 Perfect for storage with a sturdy resin case! 〇 Significant increase in both material and size lineup! 〇 Material can be identified by label color! 〇 Prices are standardized by material, making it affordable! 〇 Empty cases can be reused for storing parts or small items 〇 You can purchase only the amount you need!

• Work tools

【Feature Details】 Make J-CRAFT even easier to use!! Grip adapter sold separately 〇 Attach to one side for use as a grip 〇 Attach to both sides for use as a simple spring 〇 Can be attached to your existing nippers and needle-nose pliers (only for size 150) 〇 Provides a stable grip for steady work with fingers resting 〇 Convenient as a simple spring for continuous work, etc. *The set includes a black grip adapter (Please note that it is not red)

• Work tools

J150RSTG 【Feature Details】 〇Even easier to use J-CRAFT!! Comes with a grip adapter! 〇Made of rust-resistant stainless steel (SUS410J2) 〇Equipped with a spring to reduce the burden of continuous work! 〇Includes gripping parts that can grasp and turn thin pipes, screws, and nuts 〇Outstanding cutting ability of the blade 〇Adopts a matte grip that is non-slip and easy to hold

• Work tools

J150RBTG 【Feature Details】 〇 Even easier to use J-CRAFT!! Comes with a grip adapter! 〇 Convenient vertical bending type of needle-nose pliers for tight workspaces 〇 In narrow areas with limited vertical space, a 45° bend allows for easy gripping 〇 Even in slightly recessed areas, you can work at a more comfortable angle while checking the tips compared to regular needle-nose pliers 〇 Excellent cutting capacity of the blade 〇 Adopts a matte grip that is non-slip and easy to hold

• Work tools

J150RBG 【Feature Details】 〇 J-CRAFT made even easier to use!! Comes with a grip adapter! 〇 Convenient side-bending type of needle-nose pliers for narrow workspaces 〇 Even in tight spaces where the tips couldn't be opened left and right, working is easy with the bending direction and angle (30°) of the Lopro's! 〇 Excellent cutting capability of the blade 〇 Adopts a matte grip that is non-slip and easy to hold

• Work tools

J150RG 【Feature Details】 〇 J-CRAFT made even more user-friendly!! Comes with a grip adapter! 〇 Ideal for assembly, repair, and disassembly tasks of hobby crafts and precision instruments! 〇 Particularly durable at the tip, suitable for gripping and bending tasks, with excellent cutting capability of the blade! 〇 Features a non-slip, easy-to-hold matte finish grip.

• Work tools

J150KNG 【Feature Details】 〇Even easier to use J-CRAFT!! Comes with a grip adapter! 〇High hardness and cutting durability of the blade allows for use in various locations, including electrical work! 〇Adopts a matte grip that is non-slip and easy to hold.

• Work tools

【Feature Details】 - Made in Japan at this price! - Standard-shaped round head blind rivets, available in a variety of sizes - Usable for the manufacturing and assembly of various products - Stainless steel body, ideal for areas requiring strength - User-friendly mandrel tip shape * Please use Ebi brand riveters for work. - Aircraft, ships, trains, automobiles, and other vehicles - Agricultural machinery, furniture, signs, and other signage - Sheet metal, construction, sashes, interiors, and more

• Work tools

【Feature Details】 - Made in Japan, all stainless steel at this price! - Standard shape round head blind rivets available in a variety of sizes - Usable for manufacturing and assembly of various products - Ideal for areas requiring strength and corrosion resistance - Recommended for water-related and outdoor applications - User-friendly mandrel tip shape * Please use Ebi brand riveters for work. - Aircraft, ships, trains, automobiles, and various vehicles - Agricultural tools, furniture, signs, and other signage - Sheet metal, construction, sashes, interiors, and more

• Work tools

【Feature Details】 〇Rivet Fastening Cycle Time 　Our conventional model R1B1: 1.7 seconds ⇒ R2B1: 0.8 seconds 　(Same speed as our fastest air riveter R1A1) 〇Weight Comparison of Cordless Riveters 　Our conventional model R1B1: 1.9Kg ⇒ R2B1: 1.7kg 　(200g lighter!) *Our air riveter R1A1

• Work tools

【Feature Details】 〇 Cuts thick wires with a compact eccentric lever! 〇 Can cut piano wire and hard steel wire! 〇 Lightweight and compact! 〇 Multi-functional pliers with simple crimping and screwdriver (1.25-2mm²) 〇 Easy to grip and apply force with a slim handle width and elastomer grip! J200PWP, P225PWP

• Work tools

【Feature Details】 - Cuts thick wires with a compact eccentric lever! - Capable of cutting piano wire and hard steel wire! - Lightweight and compact! - Easy to grip and apply force with a slim ergonomic elastomer grip! J165PWN, P185PWN

• Work tools

【Feature Details】 - With an eccentric lever, it can cut thick lines despite being compact! - Beautiful cross-section with a thin, sharp flat blade! - Easy to grip and apply force with a slim handle width made of elastomer! J200PWNU, P225PWNU

• Work tools

【Feature Details】 〇 Made of rust-resistant stainless steel (SUS410J2) 〇 Equipped with a spring to reduce the burden of continuous work! 〇 Features gripping sections that can grasp and turn thin pipes, screws, and nuts 〇 Excellent cutting ability of the blade 〇 Adopts a matte grip that is non-slip and easy to hold J150RST

• Work tools

【Feature Details】 - Convenient vertical bending type of needle-nose pliers for narrow working areas - Even in tight spaces with limited vertical clearance, you can easily grip with a 45° bend - In slightly recessed areas, you can work at a more comfortable angle while checking the tips compared to regular needle-nose pliers - Exceptional cutting capability of the blade - Features a matte finish grip that is non-slip and easy to hold J150RBT

• Work tools

【Feature Details】 〇 A super multifunctional radio pliers with 7 functions 〇 Interrupt cutting, simple crimping, 〇 Wire stripping, and more for wiring tasks 〇 Equipped with a spring to reduce the burden of continuous work 〇 Adopts a matte grip that is non-slip and easy to hold J150RM

• Work tools

【Feature Details】 - Compatible with 18V impact tools - Socket adapter that works with your existing sockets - Suitable for recessed areas and high locations

• Work tools

【Feature Details】 - Compatible with 18V impact - Socket adapter that can use your existing sockets - 30° swivel for working in corners and tight spaces

• Work tools

【Feature Details】 - Compatible with 18V impact - Socket adapter that can use your existing sockets

• Work tools

【Feature Details】 - Compatible with 18V impact tools - For attaching and detaching hex type (hex head) screws and bolts - The joint part for electric tools has a double groove compatible with both 9.5mm and 14mm, allowing attachment to various electric drills - Equipped with a strong magnet to securely hold hex type screws and bolts, improving work efficiency

• Work tools

【Feature Details】 - Compatible with 18V impact tools - For attaching and detaching hex type (hexagonal head) screws and bolts - The joint part for electric tools has a double groove compatible with both 9.5mm and 14mm, allowing it to be attached to various electric drills.

• Work tools

【Feature Details】 - Compatible with 18V impact - The roller automatically grips the screw section for quick installation Can also be used for reverse rotation - Suitable for attaching and detaching foam ties and P connectors - By press-fitting a hex shaft into the hex hole of the socket part, it is resistant to twisting and breaking, and has high torque transmission efficiency.

• Work tools

【Feature Details】 - Compatible with 18V impact - Dual-purpose for Ivy foam ties and K-type foam ties - By press-fitting a hex shaft into the hex hole of the socket, it is resistant to twisting and breaking, and has high torque transmission efficiency.

• Work tools

【Feature Details】 - Compatible with 18V impact - Easy-to-insert trumpet shape - By press-fitting a hex shaft into the hex hole of the socket part, it is strong against twisting and breaking, and has high torque transmission efficiency.

• Work tools

【Feature Details】 - Compatible with 18V impact - The tip's fangs remove mortar attached to the P-con and capture the internal nut - By press-fitting a hex shaft into the hex hole of the socket, it is resistant to twisting and breaking, and has high torque transmission efficiency - Designed for deep holes, making it usable even when the male thread protrudes significantly

• Work tools

【Feature Details】 - Compatible with 18V impact drivers - 30° swivel angle for removing and attaching bolts and nuts in corners and tight spaces - Designed for deep holes, allowing use even when male threads are long - The long type is also suitable for bolts and nuts in deeper or higher locations

• Work tools