ユニラムジャパン List of Products and Services

The "Comprehensive Catalog for Sheet Metal and Painting" is a catalog from Uniram Japan that handles solvent regeneration devices, solvent recovery devices, and solvent recycling devices. It features a simple design and easy operation, including the explosion-proof international standard certified model "Automatic Solvent Regeneration Device," as well as "Automatic Spray Gun Cleaning Machines" and "Water-Based Paint Spray Gun Cleaning Machines." [Contents Included] ■ Automatic Solvent Regeneration Device ■ Automatic Spray Gun Cleaning Machine ■ Water-Based Paint Spray Gun Cleaning Machine *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Automatic Solvent Regeneration Device Catalog" is a product catalog from Uniram Japan that handles solvent regeneration devices, solvent recovery devices, and solvent recycling devices. It includes models certified to international explosion-proof standards, such as the "URS 2000CE-SSJ," as well as the "URS 1600CE-SSJ" and "URS 970CE-SSJ." [Contents] ■ Continuous Automatic Solvent Regeneration Device ■ Batch Automatic Solvent Regeneration Device ■ Mechanism of Solvent Regeneration Devices *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

The "High-Speed Recycling URS1600CE-SSJ" is a solvent regeneration device with IEC international standard explosion-proof certification, expected to reduce industrial waste costs and improve the working environment. The distillation temperature can be set between 50°C and 200°C in 1°C increments, and the heating heater output can also be adjusted, allowing for a wider range of solvent regeneration. A manual drain valve is equipped at the bottom of the distillation tank, making it easy to remove any remaining liquid sludge after the regeneration process is complete. 【Features】 ■ IEC international standard explosion-proof certification ■ Compact design that does not require specific installation space ■ Fine temperature settings available ■ Easy to operate ■ Built-in diaphragm pump ■ Easy cleanup *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services

The "UPS20DA" is a pumping station that allows you to transfer cleaning agents (liquids) from drums to pails simply by turning a dial. It uses a diaphragm pump powered by safe compressed air, without the use of an electric motor. An intake hose (included) with a pipe at the end is inserted into the drum, and a discharge hose (included) is inserted into the pail. 【Features】 - The main unit is wall-mounted, so it doesn't require extra space. - It has a convenient handle for portability. - The dial (timer) can be set for up to 5 minutes. - The end of the discharge hose is equipped with a valve to control the discharge amount. For more details, please contact us or download the catalog.

• others

The "UP6000" is a pail and parts cleaning machine that efficiently cleans used dirty containers such as pails in a short amount of time. It is also possible to clean painted parts and jigs with the included cleaning brush. By using the exhaust duct, odors during and after cleaning can be prevented from spreading to the surrounding area. 【Features】 ○ The cleaning agent can be reused multiple times. ○ If the cleaning agent becomes dirty, it can be regenerated with an optional solvent regeneration device. ○ No power supply is needed, which helps reduce running costs (compressed air is required). For more details, please contact us or download the catalog.

• Sanitary fixtures

Reduction of industrial waste and improvement of work environment Compliance with P.R.T.R. law and reduction of new liquid purchase costs 【Features】 ● Explosion-proof certified model compliant with IEC international standards Conforms to IEC60079 series explosion-proof structure ● Compact design does not require much installation space ● Fine temperature settings are possible Distillation temperature can be selected in 1°C increments between 75°C and 200°C, and heating heater output can also be adjusted, allowing for a wider range of solvent regeneration. ● Easy to operate Automatic unmanned operation can be achieved by simply pressing a button on the computer panel. ● Built-in diaphragm pump This device is equipped with an air-driven diaphragm pump, allowing for automatic transfer of waste solvents to the upstream tank. ● Easy cleanup A manual drain valve is equipped at the bottom of the distillation tank, making it easy to remove any remaining liquid sludge after the regeneration process is complete. ■□■ For more details, please request documentation or download the catalog ■□■

• Other Management Services

【Features】 ● Equipped with a high-performance double diaphragm pump, significantly improving durability compared to conventional pumps. Moreover, the discharge capacity is large at 12L/min. ● The cleaning tank is made of stainless steel, and the diaphragm pump uses a special Teflon plate, making it compatible with solvent-based and water-based paints. ● Adopting a low-failure mechanical timer (patented), cleaning operations can be performed simply by turning the cleaning timer. The timer is usually set for 45 seconds but can be adjusted up to a maximum of 3 minutes. ● It comes with a safety lid, so if the lid is opened during cleaning, the pump operation will automatically stop. 【Functions】 ● Air rinse function ● Final rinse function ■□■ For more details, please request documentation or download the catalog ■□■

• Other Management Services

※There are waste liquids that cannot be regenerated with this device. - Waste liquids that are prone to bumping during the heating process; waste liquids with a boiling point temperature of 240°C or higher. - If the flash point temperature of the waste liquid is 200°C or lower. - When regeneration is complete, if the sludge solidifies, please use a separately sold liner bag (pressure-resistant nylon). - When regeneration is complete, if the sludge does not solidify, a liner bag is not necessary.

• Other Management Services

【Features】 ● Equipped with a high-performance double diaphragm pump, significantly improving durability compared to conventional pumps. Moreover, the discharge capacity is large at 12L/min. ● The cleaning tank is made of stainless steel, and the diaphragm pump uses a special Teflon plate, making it compatible with solvent-based and water-based paints. ● Adopting a low-failure mechanical timer (patented), cleaning operations can be performed simply by turning the cleaning timer. The timer is usually set for 45 seconds but can be adjusted up to a maximum of 3 minutes. ● It comes with a safety lid, so if the lid is opened during cleaning, the pump operation will automatically stop. 【Functions】 ● Air rinse function ■□■ For more details, please request materials or download the catalog ■□■

• Other Management Services

*This machine may not be able to regenerate certain substances due to solvents. During the heating process, if the waste liquid is prone to bumping, has a boiling point of 280°C or higher, a flash point of 200°C or lower, if the sludge solidifies after regeneration, or if the viscosity of the waste liquid is high.*

• Other Management Services

※There are waste liquids that cannot be regenerated with this device. - Waste liquids that are prone to bumping during the heating process; waste liquids with a boiling point temperature of 240°C or higher. - If the flash point temperature of the waste liquid is 200°C or lower. - If the sludge solidifies at the end of regeneration, please use a separately sold liner bag (pressure-resistant nylon). - If the sludge does not solidify at the end of regeneration, a liner bag is not necessary.

• Other Management Services

Reduction of industrial waste and improvement of work environment Compliance with P.R.T.R. law and reduction of new liquid purchase costs 【Features】 ● IEC international standard explosion-proof certified model ● Compact design, so it does not require much installation space ● Fine temperature settings are possible The distillation temperature can be set between 75°C and 200°C in 1°C increments, and the heating heater output can also be adjusted, allowing for a wider range of solvent recovery. ● Easy to operate Automatic unmanned operation can be achieved simply by pressing a button on the computer panel. ● Built-in diaphragm pump This device is equipped with two air-driven diaphragm pumps. One is for transferring waste solvents into the tank, and the other is for transferring the recovered liquid from the recovery can (approximately 60 liters) outside the cabinet. ● Easy cleanup A manual drain valve is equipped at the bottom of the distillation tank, allowing for easy removal of any remaining liquid sludge after the recovery process is completed. ■□■ For more details, please request materials or download the catalog ■□■

• Other Management Services

【Features】 ● Equipped with a high-performance diaphragm pump, enabling speedy cleaning. ● Cleaning can be performed in two ways: with a cleaning gun and a cleaning brush. ● The UNIRAM-made clean filter recycles water after cleaning, preventing unnecessary water usage. 【Main Functions】 ● Brush Cleaning Function A wash brush is attached to the tip to clean the appearance of the spray gun. ● Cleaning Gun Function For cleaning the inside of the spray gun, a wash gun is used to perform high-pressure cleaning. ● Air Blow Function Air is used to blow away water droplets after cleaning, drying the surface. ● Paint Coagulant Usage The wastewater after cleaning is treated with either UNIRAM-made or commercially available paint coagulants and two types of filters, removing only the paint components, solidifying them, and allowing the water to be reused for cleaning, saving on water bills. *We also offer a solvent cleaning type, so please consult us. (UG3000SA / UG4000SA / UG4000VM) ■□■ For more details, please request materials or download the catalog ■□■

• Other Management Services

【Features】 ● Equipped with a high-performance double diaphragm pump, significantly improving durability compared to conventional pumps. Additionally, it has a large discharge capacity of 12L/min. ● The cleaning tank is made of stainless steel, and the diaphragm pump uses a special Teflon plate, making it compatible with solvent-based and water-based paints. ● Adopts a low-failure mechanical timer (patented), allowing cleaning operations to be performed simply by turning the cleaning timer. The timer is usually set for 45 seconds but can be adjusted up to a maximum of 3 minutes. ● It comes with a safety lid, which automatically stops the pump operation if the lid is opened during cleaning. 【Functions】 ● Air rinse function ● Final rinse function ● Automatic discharge function for cleaning liquid vapor (thinner vapor) ● Brush cleaning function ■□■ For more details, please request documentation or download the catalog ■□■

• Other Management Services