日本アクア List of Products and Services

The 'Ant-Repellent Aqua Foam 1-Component Hand Type' is a handy foam that allows for insulation, airtightness, and ant-repellent treatment to be applied simultaneously. Since the insecticide is carried by the urethane, it is effective even in very small amounts. There is no concern about decomposition or leaching by microorganisms as it does not come into contact with the soil. Please use it in areas where insulation and airtightness performance, as well as ant-repellent performance, are required, such as around foundations, entrances, bathrooms, floors, gaps in piping, and around first-floor columns. 【Features】 ■ High effectiveness with a very small amount of insecticide ■ Supplied in an aerosol can ■ Easily fills gaps ■ No diffusion or leaching of insecticide *For more details, please refer to the PDF document or feel free to contact us.

• Hard urethane foam
• Insulation work
• Pest and insect control products

"Aqua Hajikun" is an ultra-fast curing waterproofing system for wooden houses. It features a simple waterproof structure consisting of a primer, polyurea, and topcoat. We will suggest the appropriate primer based on the type and condition of the substrate. Additionally, it has obtained fire spread certification from the Ministry of Land, Infrastructure, Transport and Tourism, allowing it to be applied to "roofs of buildings in fire prevention areas or quasi-fire prevention areas" and "roofs of buildings located in areas designated by specific administrative agencies outside of fire prevention and quasi-fire prevention areas." 【Features】 ■ For wooden houses ■ Achieves short construction periods with ultra-fast curing after spray application ■ Excellent strength and waterproof performance ■ Flexible response for new construction, renovations, and various construction methods ■ Fire spread certification passed for adhesion method *For more details, please refer to the PDF materials or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material
• Coating film waterproofing material/permeable waterproofing material
• Waterproofing work

"Aqua Form LITE" is an insulation material made with plant-derived ingredients. It is sprayed to fill the walls, and any excess that extends beyond the studs is cut off. The cut-off scraps are reused as raw material for "Aqua Blow." Additionally, it has obtained fire-resistant structure certification for both wooden frame construction and panel wall construction. It demonstrates high insulation performance and excellent airtightness while being environmentally friendly. 【Features】 ■ Contains plant-derived ingredients ■ Exhibits high insulation performance and excellent airtightness ■ Meets the standard values of JISA9526 Class A Type 3 ■ Obtained fire-resistant structure certification for both wooden frame construction and panel wall construction ■ Scraps are reused as raw material for "Aqua Blow" *For more details, please refer to the PDF document or feel free to contact us.

• Hard urethane foam
• Insulation work
• Other wall materials

"Aqua Shot" is a simple two-component mixing spray system that can be used for waterproof spray application and insulation repair work. You can attach a handheld hose to the end of the cartridge. It allows for easy application in narrow spaces where the main unit cannot be moved, as well as for detailed work. Additionally, you can use it simply by filling the cartridge with the raw materials you usually use. (Compatible for both waterproofing and insulation) 【Features】 - Easy application even in small spaces - Compatible with multiple raw materials such as waterproofing and insulation - Can be applied in a short time with minimal equipment - Two selectable styles (short-range type and mid-range type) - 1.5L large capacity cartridge *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Work tools

"Aqua Moen NEO" is a spray-applied rigid polyurethane foam for building insulation that achieves high flame-retardant performance through a special resin formulation. It quickly forms a strong surface carbonization layer, preventing flames and sparks from penetrating the foam interior. This contributes to reducing fire risks on construction sites where welding and cutting sparks may scatter. It is a single material that completes installation in one application, hardening quickly after spraying. As a wet non-combustible material, it eliminates the need for drying time, leading to shortened construction periods. 【Features】 ■ Obtained non-combustibility certification from the Ministry of Land, Infrastructure, Transport and Tourism (Certification Numbers: NM-4962-1, NM-4963-1) ■ Excellent durability and adhesion strength, making it difficult to detach ■ Capable of filling complex structures and intricate areas without gaps ■ High insulation performance and vapor resistance, suppressing internal condensation *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Hard urethane foam
• Insulation work

In Japan, where summers are hot and winters are cold, homes are filled with hidden risks. Heatstroke that occurs in summer actually happens indoors 40% of the time. Furthermore, the heat shock caused by sudden temperature changes in winter is more than four times that of traffic accidents. The whole-house air conditioning system "Z Air Conditioning," a new era of heating and cooling, achieves a barrier-free environment with minimal temperature differences throughout the year. 【Features】 ■ A whole-house air conditioning system that can be set to a comfortable temperature anywhere in the home ■ No temperature differences between rooms, gentle on the body ■ Low installation costs and electricity bills, etc. *For more details, please contact us.

• Heating and cooling equipment and facilities
• Insulation work

"Aqua Foam" is an environmentally friendly insulation material made from water. Houses insulated with Aqua Foam can reduce heating and cooling energy consumption, thereby decreasing CO2 emissions. Rigid polyurethane foam is expanded and sprayed on-site using the power of water. This eliminates the loss of gas that can reduce performance. By utilizing the carbon dioxide generated from mixing isocyanate and polyol containing water as a foaming agent, it is a polyurethane foam material that does not use any CFCs, which are responsible for ozone layer depletion and global warming, making it considerate of the Earth. 【Features】 ○ Kind to people and the environment ○ Improved ventilation system efficiency ○ Quiet living space with sound absorption performance ○ Stable performance over a long period ○ Excellent insulation and sound absorption properties For more details, please contact us or download the catalog.

• Hard urethane foam
• Ventilation system
• Insulation work

This is a renovation proposal using on-site spray foam insulation "Aqua Foam." Traditionally, it required a parking space for the construction truck loaded with equipment, and the spray hose could not reach, making it unsuitable for narrow alleys, single-family homes, or high-rise apartments. Japan Aqua has succeeded in compacting the foam equipment! It can now fit in elevators, allowing it to be used in various locations. It is easy and low-cost since it only requires spraying the areas that need insulation. *Exclusive for Ipros users! We are currently offering a collection of construction case studies! Please download it from the form below for more details. 【Features】 ◆ Compact foam system suitable for narrow sites and high floors! ◆ Reduces the risk of heat stroke in summer and heat shock in winter! ◆ As it is sprayed on-site, it fills every corner of columns and walls, leaving no gaps. For more details, please contact us or download the catalog to view.

• Insulation work

"Aqua Form NEO" is a high-performance, environmentally friendly spray-applied rigid polyurethane foam for building insulation. It combines the advantages of both alternative refrigerant types and non-fluorocarbon types, and the HFO used as a blowing agent has an ozone depletion potential (ODP) of "0" and a global warming potential (GWP) of "1," contributing to the prevention of global warming. Additionally, it achieves insulation performance equivalent to conventional HFCs, allowing for a reduction in foam thickness, which has been a challenge with current non-fluorocarbon types. 【Features】 ○ High Performance - Insulation performance equivalent to conventional polyurethane foam ○ Environmental Characteristics - Uses a new blowing agent with an ozone depletion potential (ODP) of zero and a low global warming potential (GWP) For more details, please contact us or download the catalog.

• Hard urethane foam
• Insulation work

"Aqua A Foam" is a spray-applied rigid polyurethane foam for building insulation. It exhibits excellent effects for insulation, condensation prevention, heat retention, and cooling in various types of construction. It has strong resistance to acids, alkalis, and oils. The on-site spray application of Aqua A Foam uses special foaming machinery to spray the raw liquid onto the target object with a spray gun, simultaneously adhering strongly to the surface and instantly foaming and curing. The thickness can be easily adjusted by spraying in layers. 【Features】 ○ Excellent insulation performance ○ Achieves a seamless insulation layer ○ Superior self-adhesive properties ○ Enables labor-saving and shortened construction periods ○ Excellent water and moisture resistance For more details, please contact us or download the catalog.

• Hard urethane foam
• Insulation work

Utilizing the characteristics of rigid polyurethane foam, the insulation construction with 'Aqua Foam' produced by using water for foaming achieves high airtightness and insulation performance, resulting in significant energy-saving effects and reducing the utility costs for heating and cooling the building. The bathroom and toilet, which have a high incidence of heat shock, remain comfortable without cooling down. It is also ideal for those troubled by discomfort in summer nights or heat on the second floor. As an energy-efficient home, the performance of the building itself improves, creating added value. 【Features】 ■ High airtightness and high insulation ■ Excellent sound absorption ■ Energy-saving ■ High durability ■ Increased added value For more details, please contact us or download the catalog.

• Insulation work

This is a renovation proposal using on-site foam insulation material "Aqua Foam." Traditionally, it required a parking space for the construction truck loaded with equipment, and the spray hose could not reach, making it unsuitable for narrow alleys, single-family homes, or high-rise apartments. Japan Aqua has succeeded in compacting the foam equipment! It can now fit in elevators, allowing it to be used in various locations. Since it only requires spraying on the areas that need insulation, it is low-cost and easy to use. *Exclusive for Ipros users! We are currently offering a collection of construction case studies! For more details, please download from the form below. 【Features】 ◆ Compact foam system suitable for narrow sites and high floors! ◆ Reduces the risk of heatstroke in summer and heat shock in winter! ◆ As it is on-site foaming, it penetrates every corner of columns and walls, preventing gaps. For more details, please contact us or download the catalog to view.

• Insulation work

The "Aqua Foam Installation Manual" introduces the items to be checked before installation and the installation procedures. The overall flow of the installation includes confirming the installation date, checking items before installation, installing Aqua Foam, and issuing the completion confirmation and delivery note. *If desired, airtightness testing (for a fee) is also available. "Aqua Foam" is an environmentally friendly insulation material born from water. Homes insulated with Aqua Foam can reduce heating and cooling energy consumption and decrease CO2 emissions. [Contents] ■ Items to check before installation ■ Items to check before installation - Roof/Ceiling ■ Items to check before installation - Walls ■ Items to check before installation - Floors/Foundations, etc. ■ Installation procedures For more details, please contact us or download the catalog.

• Roof and gutter construction
• Insulation work

"Aquea Silver" is an ideal ventilation spacer for water-foamed insulation materials. It reflects infrared rays due to the vapor-deposited aluminum, suppressing radiant heat. The aluminum surface is coated, ensuring long-lasting heat insulation effects. By simply fitting it between the rafters and securing it with a stapler, you can easily and reliably create a ventilation layer (approximately 30mm). The adoption of "cut guidelines for hip roofs" and "one-touch folding" significantly shortens the time required for ventilation layer construction. It has moisture permeability, so it cannot prevent moisture discharge. 【Features】 ■ Workability - One-touch folding - Cut guidelines for hip roofs ■ New Performance - Improved solar reflectance - Retention of ventilation - Enhanced durability For more details, please contact us or download the catalog.

• Insulation work

"Aqueartop" is a ventilation spacer of the heat-insulating type that is ideal for water-foamed insulation materials. It reflects infrared rays due to the vapor-deposited aluminum, suppressing radiant heat. Additionally, because the aluminum surface is coated, the heat-insulating effect lasts for a long time. It has both moisture permeability and heat insulation properties. Being in roll form, it is convenient for transportation and has excellent workability. 【Features】 ○ Heat insulation performance ○ Maintenance of ventilation ○ Enhanced durability For more details, please contact us or download the catalog.

• Insulation work

"Aqua Silver Wall Single" is an ideal thermal insulation sheet for water-foamed insulation materials. It allows moisture within the wall to escape, preventing condensation, while also blocking the intrusion of water and wind from the outside, thereby maintaining the performance of the insulation material and extending the lifespan of the house. The aluminum surface reflects approximately 75% of infrared rays. By incorporating an aluminum vapor-deposited layer, more effective heat shielding is possible. It improves indoor heating and cooling efficiency and contributes to energy conservation. 【Features】 ○ Heat insulation ○ Moisture permeability ○ Waterproof and windproof For more details, please contact us or download the catalog.

• Heat shielding sheet
• Waterproofing work
• Insulation work

"Aqua Silver Wall Double" is an optimal heat-insulating sheet for water-foamed insulation materials. It allows moisture within the wall to escape, preventing condensation, while blocking the intrusion of water and wind from the outside, thereby maintaining the performance of the insulation material and extending the lifespan of the house. The aluminum surface reflects about 90% of infrared rays. By providing a double layer of aluminum vapor deposition, more effective heat insulation is possible. This improves indoor heating and cooling efficiency and contributes to energy conservation. 【Features】 ○ Heat insulation ○ Moisture permeability ○ Waterproof and windproof For more details, please contact us or download the catalog.

• Heat shielding sheet
• Waterproofing work
• Insulation work

The "Aqua Silver Wall Light" is a lightweight thermal insulation sheet made from aluminum-coated non-woven fabric, enabling effective heat shielding. It is ideal for use in conjunction with load-bearing materials. It improves indoor heating and cooling efficiency, contributing to energy savings. It allows moisture within the wall to escape, preventing condensation. Additionally, it prevents the intrusion of water and wind from the outside, maintaining the performance of insulation materials while extending the lifespan of the building. Weighing only 3.4 kg per roll, it is lightweight and easy to work with. Its small diameter also allows for one-handed installation. 【Features】 ○ Heat shielding ○ Moisture permeability, waterproofing, windproofing ○ Ease of installation For more details, please contact us or download the catalog.

• Heat shielding sheet
• Waterproofing work
• Insulation work

"Aqua White Wall" is a specialized sheet that allows for direct application of aqua foam, preventing water intrusion from the outside and improving the lifespan of the home. With enhanced wind resistance, heating and cooling efficiency is increased. The secret lies in the special film that allows air to pass through, releasing moisture outside and creating a comfortable indoor environment. It is strong, lightweight, and excellent for workability, resulting in minimal flapping due to wind and a comfortable installation process. 【Features】 ○ Moisture permeability ○ Waterproof and windproof ○ Light transmission ○ Lightweight For more details, please contact us or download the catalog.

• Waterproof sheet
• Waterproofing work
• Insulation work

"Aqua Packing" is a packing material for foundation insulation that enhances the airtightness of buildings. Due to its excellent flexibility, it has good adaptability to joint variations and exhibits high airtightness. When used in conjunction with Aqua Foam, it improves both insulation and airtightness. The moisture-proof film with the packing adhered is transparent, allowing for visual confirmation of the foundation bolts, making positioning easy and enhancing workability. 【Features】 ○ High airtightness ○ Adaptability ○ Excellent workability For more details, please contact us or download the catalog.

• Insulation work

The "Aqua Through Series" is a ridge and eaves ventilation product equipped with an overwhelming air exhaust capacity to expel heat and humidity from homes. The rain entry limit of the "Aqua Through Ridge" is more than twice that of commercial products (50m/sec). It can be installed on steep roofs and is compatible with commercially available ridge covers. The "Aqua Through Eaves" shuts out rain and snow. (The rain entry limit is more than three times that of commercial products (45m/sec)). It prevents snow from melting into ice, resolving issues with icicles and condensation in attics. There is no need to drill holes in the exterior walls during installation. A wide "Wide Type" with a width of 150mm is also available separately. 【Features】 [Ridge Ventilation Aqua Through Ridge] ○ Effective ventilation area…524cm²/unit, 288cm²/m ○ Ceiling area compliant with old public housing standards…83m²/unit ○ Effective opening area αA (cm²)…5.895×Q (0.2151) ○ Material…Weather-resistant polypropylene For more details, please contact us or download the catalog.

• Roof and gutter construction
• Insulation work

"Aqua Foam 1 Liquid Type Hand Version" is a non-fluorocarbon rigid polyurethane that is ideal for thermal insulation assistance in all types of insulation material applications. It features both nozzle discharge and gun discharge, allowing for dual discharge methods. It expands to about twice its size and hardens internally in approximately 40 minutes (complete curing occurs after 24 hours). It is a recommended product for Aqua Foam. 【Features】 ○ Ideal for thermal insulation assistance in all types of insulation material applications ○ Capable of filling complex uneven surfaces and fine gaps ○ Can be used for bonding and fixing different materials ○ Dual discharge method (nozzle discharge and gun discharge) For more details, please contact us or download the catalog.

• Hard urethane foam
• Insulation work
• stone

"Aqua Foam" is an environmentally friendly insulation material born from water. Houses insulated with Aqua Foam can reduce cooling energy consumption and decrease CO2 emissions. It can also prevent the occurrence of heat shock. By using the power of water to foam and spray hard polyurethane foam on-site, the gas escape that reduces performance is eliminated. By utilizing the carbon dioxide generated from mixing isocyanate and polyol containing water as a foaming agent, it is a planet-friendly polyurethane foam material that does not use any freon, which causes ozone layer depletion and global warming. In addition to the on-site foamed insulation material "Aqua Foam," we also handle various products optimal for Aqua Foam, such as the heat-insulating sheet "Aqua Silver Wall" and the heat-insulating spacer "Aqua Air Silver." [Features] - Friendly to people and the environment - Efficient ventilation system - Quiet living space with sound absorption performance - Long-lasting, stable performance - Excellent insulation and sound absorption properties For more details, please contact us or download the catalog.

• Heat shielding sheet
• Ventilation system
• Insulation work

"Aqua Blow" is an insulation material for blowing-in methods that utilizes resources generated during the application of Aqua Foam through recycling. Aqua Foam waste was being repurposed through thermal recycling (as fuel), but by crushing it and turning it into insulation material, it has been transformed into a lightweight insulation material, making it ideal for blowing-in methods. This recycling of resources eliminates waste and provides a comfortable thermal environment through eco-friendly construction that considers the environment. 【Features】 ■ High insulation ■ Safety ■ Workability ■ Long-term stability ■ Reduced environmental impact For more details, please contact us or download the catalog.

• Insulation work

"Aquatite" is a low-viscosity, one-component modified silicone elastic adhesive that is suitable for bonding floor joists and wooden floor finishing materials in construction and interior work. It can be easily removed from both steel and plastic supports, as well as from the floor surface. Unlike polyurethane types, it does not exhibit foaming during curing, and it has minimal shrinkage compared to water-based and solvent-based products. In addition to application with a cartridge gun, it also performs well when applied by hand. 【Features】 ■ Bead application is acceptable ■ Minimal viscosity change ■ Excellent elasticity prevents floor squeaking ■ Capable of a wide range of wooden floor finishing work ■ Non-formaldehyde product: Complies with JAIA F☆☆☆☆ and JAIA 4VOC standards For more details, please refer to the catalog or feel free to contact us.

• glue

"Aquatite PU" is a low-viscosity, one-component polyurethane resin adhesive suitable for bonding floor joists and wood floor finishing materials in construction and interior work. It can also be used with steel and plastic supports! In addition to application with a cartridge gun, it is also effective for hand application. 【Features】 - One-component type eliminates the need for lightweight mixing, with no risk of formulation errors. - Provides a flexible and tough film with high deformation followability and adhesion strength. - Prevents floor squeaking, with no squeaking caused by the adhesive. - Does not fall under the hazardous materials category of the Fire Service Act (designated combustible materials, combustible solids). - Non-formaldehyde product: conforms to JAIA F☆☆☆☆ and JAIA 4VOC standards. For more details, please refer to the catalog or feel free to contact us.

• glue