ティックコーポレーション List of Products and Services

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be reduced. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Rehira Multi-Channel Jet (Air Nozzle) Material: Brass Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

• others

Rehira's multi-channel jet (air nozzle) allows for a laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

• others

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only allows for powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width). *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only provides powerful impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Rehira's multi-channel jet (air nozzle) allows the air to flow in a laminar manner, enabling not only powerful impact force but also a reduction in noise levels. Additionally, by maintaining laminar flow, it is possible to reduce the amount of air consumed during use. In other words, it is an energy-saving product.

• others

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing location freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Multi-channel jet (flex hose) Material: Polyacetal resin The flex hose, which can be fixed to any desired blowing location, can be used over a wide temperature range from -30°C to 80°C. Dedicated flex hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to any desired location for blowing freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected to 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600E multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• container

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used within a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600R. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current model has an orange tip on the flexible hose and a dark blue body. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes with the multi-channel jet (air nozzle) FL-600M pre-installed. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

The Lechler vertical axis full cone nozzle, model number 490/491 series, features a smooth, unique internal structure that makes it resistant to clogging. In standard nozzles, the diameter inside the nozzle differs from the diameter at the inlet and outlet, which can lead to clogging when creating a swirling flow. However, with the 490/491 series, the diameter inside the nozzle is the same as the inlet and outlet diameter, providing the advantage of a smooth swirling flow that is less prone to clogging. 【Features】 ■ Compatible with various fluids ■ Unique structure that minimizes clogging ■ Patented unique structure ■ Suitable for nozzles in equipment where reducing replacement frequency is desired *Please check the catalog for structural details and size lineup.

• others

The 500.191 series is designed for use in corrosive environments and is compliant with FDA and EC No. 1935/2004. This nozzle is capable of spraying foam. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 566 series is equipped with an effective flat jet nozzle and uses PEEK material slide bearings. It is a nozzle suitable for FDA and EC No. 1935/2004, particularly used in the food and beverage industry. An ATEX version compliant with explosion-proof standards is also available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5NA series NanoSpinner features a compact design, making it effective for cleaning in limited spaces. Additionally, this rotating nozzle employs double ball bearings and has become a very popular product. The entire nozzle is made of stainless steel and can be used at high temperatures. An ATEX version is also available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5MI series efficiently cleans the inside of tanks with its innovative slot design. It ensures durability and reliability with its latest bearing structure. This MiniSpinner is made entirely of stainless steel and is designed for use at high temperatures. In addition to stainless steel, Hastelloy versions are also available. We also offer ATEX versions upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5MC series efficiently cleans the tank with its innovative slot design. It ensures durability and reliability with the latest bearing structure. This nozzle is made entirely of stainless steel and is designed for high-temperature use. In addition to stainless steel, we also offer Hastelloy versions. We can also provide ATEX versions upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5TB series, along with the 5TA series, is a tank cleaning nozzle suitable for the pharmaceutical and food and beverage industries. The high-performance solid jet spray controlled by gears effectively removes stubborn dirt. Additionally, it has a high-quality surface treatment. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5TA series is a tank cleaning nozzle suitable for the pharmaceutical and food and beverage industries. Its high-performance solid jet spray effectively removes stubborn dirt. Additionally, this nozzle is suitable for small tanks. The recommended pressure is 0.5 MPa, but the maximum operating pressure can go up to 1.5 MPa. It also features high-quality surface treatment. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 577 series cleans with powerful impact using a specially shaped nozzle. We offer nozzles with various flow rates and spray angles. Therefore, it is possible to select the appropriate tank cleaning spray nozzle based on the shape and application of the tank. Additionally, the large orifice of the nozzle makes it less likely to clog. *Lechler GmbH is a German nozzle manufacturer.*

• others

The main feature of the 594/595 series nozzles is the foam spray! Since they are certified by EHEDG, they can be used not only for cleaning inside tanks but also for cleaning within the plant. They are one of the nozzles that perform effective cleaning even at low pressure. *Lechler GmbH is a German spray nozzle manufacturer.

• others

The 5S2 / 5S3 series performs spraying with a special flat jet nozzle, allowing for powerful and uniform cleaning. Additionally, effective cleaning is achieved by controlling the rotation. It is available in various spray angles and flow rates. Lechler monitoring sensors can be used. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

The 5P2/5P3 series can be installed at the same level as the tank's wall. At a certain water pressure, the rotating nozzle pops out from the housing and cleans the inside of the tank. This nozzle is also suitable for pipe cleaning and foam spraying. It is particularly used in the food and beverage industry, pharmaceutical industry, and chemical industry. *Lechler GmbH is a German spray nozzle manufacturer.

• others

The 5TM series is used in various industries, particularly in the petrochemical industry. Its strong impact force from gear-controlled rotation and linear spraying allows for very effective cleaning inside tanks. A high-temperature compatible version of the 5TM can also be provided upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Are you having trouble with the blow process using air? There is always a cleaning process for parts (such as components) and products (like PET bottles and retort pouches). Following that process, there is always a drying process. I have heard that this drying is an eternal theme. Shall we finally resolve this eternal theme? Sonic's blowers and air knives efficiently and economically solve problems with high air volume and high-speed air! ▼ A task that required 0.4 MPa of pressure can now be achieved with just 29 kPa! ▼ When comparing the air volume of a compressor and a Sonic blower, to achieve an air volume of 7 m³/min, a compressor requires 62.5 horsepower. In contrast, the Sonic blower can achieve this with only 4 horsepower. The difference compared to compressors and domestic blowers is significant! The "Air Knife Trivia" section includes numerous case studies for problem-solving. 【Examples of cases】 ■ Automotive industry case studies ■ Food and beverage industry case studies ■ Pharmaceutical industry case studies ■ Steel industry case studies, etc. *For more details, please request materials or view the PDF data from the download.

• Conveyor

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Conveyor

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Sonic Corporation's 'Blower & Air Knife' is a device that dramatically improves the efficiency of part drying, food processing drying, and water droplet removal. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! It achieves a 75% reduction in energy consumption compared to compressor air, while maintaining a water removal efficiency of over 95%, resulting in significant energy savings. ≪Sonic Corporation Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Thanks to proprietary technology, it generates a large airflow with energy efficiency compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. The structure is also easy to maintain.

• Conveyor

This is a case study of Sonic Corporation's blower and air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, contamination of micro-particles due to static electricity in clean rooms, and removal of residual water after cleaning contact lens pallets. We also present conceptual installation diagrams and photos. For more details, please contact us or refer to the catalog. We also have demo units available. You can try them at your factory! Alternatively, we can conduct simple tests at our company! Please consider it!

• others

This is a collection of case studies on Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also include photographs. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them out at your factory! Alternatively, you can conduct simple tests at our company! Please consider this!

• others

The air knife's gap or slot can be adjusted in length to allow for a wider gap. This means that the air knife concentrated on the body can maintain a standard gap while separately adjusting the knife's gap at the top and bottom to hit the handle and the lower ring. This method not only ensures that the air effectively hits the body of the canister but also reduces the required power consumption. SONIC has also suggested further cost reductions by using ABS piping instead of plated steel pipes to lower prices. [Content] [Issues] ○ Yankee Gas faced the problem of propane gas canisters not being sufficiently dry before going to the painting process while changing their solvent-based painting system. ○ Proper drying of the canisters is essential for effective painting. ○ The drying method they were using involved compressed air, which was ineffective and did not adequately remove moisture for painting. ○ High humidity means that no matter how much compressed air is applied, moisture remains on the canisters. For more details, please contact us or download the catalog.

• Conveyor

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at a speed of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has demonstrated exceptional drying effectiveness when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot may occur after passing through the cleaning brush. ○ Residual shot material sticks to large electromagnetic surfaces, making transportation hazardous. For more details, please contact us or download the catalog.

• others