カネコ化学 List of Products and Services

The "eSolve 21FP-5" is a resin dissolver capable of dissolving a wide range of resins, including PET. It can dissolve resins that have been difficult to dissolve in the past, such as PET resin and polyamide resin, at room temperature. It is a non-hazardous substance that is not subject to the Labor Safety and Health Act, Organic Solvents Act, Special Control Act, or PRTR Act, and is not subject to the Fire Service Act, making it easier to handle compared to conventional resin dissolvers. **Main Features of eSolve 21FP-5** ▶ Capable of dissolving PET resin, which could not be dissolved with conventional solvents. ▶ Dissolution cases have been confirmed for the following resins: - PET resin, PBT resin, PBAT resin, polyamide resin - Polyether imide resin, ABS resin, acrylic resin - Polycarbonate resin, etc. ▶ Due to the absence of inorganic compounds and non-volatile residues, it is possible to use eSolve 21FP-5 as a solvent for film formation through solvent evaporation removal. ▶ It is an easy-to-handle dissolver as it is not subject to the Fire Service Act and is a non-hazardous substance. ▶ The main component is a fluorinated solvent. It does not contain methylene chloride, trichloroethylene, 1-bromopropane, etc. **Main Applications** ▶ Dissolution and adhesion of various resins ▶ Rework and component recovery ▶ Analysis and evaluation ▶ Weight reduction through resin dissolution

• Safety and consumables
• Temporary Construction Materials

【Features】 ◆ A fluorinated cleaning agent specialized for the cleaning and dissolution of uncured to partially cured urethane/epoxy. This cleaning agent is effective for both water-soluble and oil-soluble resins with just one solution. It can clean a wide range from uncured raw materials of urethane to partially cured mixtures. ◆ No flash point, not subject to fire safety laws!! It is a highly safe cleaning agent. ◆ Three types are available, ranging from low-cost to high-functionality/low-toxicity products. Due to its low toxicity, it can help reduce the burden on workers. It is suitable as an alternative to chlorine-based, hydrocarbon-based, and bromine-based cleaning agents. 【Applications】 ◆ Cleaning agent for uncured urethane and epoxy resins ◆ Cleaning agent for automatic dispensing machines, piping, and tanks ◆ Soaking and cleaning of partially cured mixing nozzles ◆ Cleaning/removal of uncured urethane and epoxy adhesives ◆ Rinsing/wiping cleaning of molds, manufacturing kilns, etc. 【Physical Properties】 ◆ Main component: Fluorinated solvent ◆ Flash point: None ◆ Boiling point: 77–78℃ ◆ Specific gravity: 1.07–1.10 (20℃) ◆ ODP: 0 (reference value)

• Safety and consumables

Are you having trouble with hydrofluoroether (HFE) that will be discontinued in 2025? As an alternative, we propose the "HFE-7000 series" from Kaneko Chemical! 【Features】 ◆ Excellent environmental performance among fluorinated liquids (ODP=0 / low GWP) ◆ Outstanding safety during use (no flash point, low toxicity, high permissible concentration) ◆ Cleaning performance utilizing low viscosity / low surface tension / low latent heat of vaporization ◆ Applicable to a wide range of materials ◆ Excellent thermal conductivity with minimal viscosity change at low temperatures and low melting point ◆ Thermally and chemically stable 【Main Applications】 ◆ Cleaning agents ◆ Water removal / finishing drying ◆ Thinners ◆ Dispersion media ◆ Solvents ◆ Refrigerants 【Product Lineup】 ◆ HFE-7100 (Component: HFE) ◆ HFE-7200 (Component: HFE) ◆ HFE-7300 (Component: HFE) ◆ HFE-71DE (Component: HFE+t-DCE) ◆ HFE-72DE (Component: HFE+t-DCE) ◆ HFE-73DE (Component: HFE+t-DCE)

• Safety and consumables
• Medicines

Due to the discontinuation of "HFC-365mfc" last year, the supply of many fluorinated cleaning agents that use this as a raw material will come to an end. Kaneko Chemical's "Nexia Series" can serve as an alternative to the cleaning agents currently using "HFC-365mfc." It is a fluorinated cleaning agent with few regulatory restrictions, as it is not subject to the PRTR Law or the Fire Service Law, and it also takes global warming into consideration. 【How to check if your cleaning agent corresponds to a product using "HFC-365mfc"】 Please check the SDS of the cleaning agent you are currently using. If it contains the following listed substance, you will no longer be able to procure it in the future due to the discontinuation of "HFC-365mfc." CAS registration number: 406-58-6 Substance name: 1,1,1,3,3-Pentafluorobutane

• Safety and consumables

"Nexia S-63" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It can be used for hand-wiping cleaning of steel plates, molds, rolls, etc., that have mineral oil-based processing oil attached, as well as for immersion cleaning of metal processing parts. Compared to other fluorine-based cleaning agents, it offers excellent cost performance. As it does not contain HFCs, it is an environmentally friendly cleaning agent. Main features of "Nexia S-63": 1) Easy to handle due to fewer regulatory restrictions as it does not contain HFCs or bromine. 2) Ozone depletion potential (ODP) is close to 0, and the global warming potential (GWP) is low. 3) Offers superior cost performance compared to other fluorine-based cleaning agents. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substances Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law on Promotion of Measures Against Global Warming g. REACH, RoHS2 Main applications: 1) Hand-wiping cleaning of mineral oil-based processing oils. 2) Hand-wiping cleaning of molds, rolls, etc. 3) Hand-wiping cleaning of silicone oil. 4) Immersion cleaning of metal processing parts. For product details, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

"Nexia S-19" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It is also suitable for cleaning uncured polyurethane resins and demonstrates excellent effectiveness for nozzle cleaning. It has excellent drying properties, enabling one-component cleaning through natural drying after washing and hand wiping. As a fluorine-based cleaning agent that does not contain HFCs, it is environmentally friendly. ● Main Features of "Nexia S-19" 1) Easy to handle due to minimal regulatory compliance, as it does not contain HFCs or bromine. 2) Ozone depletion potential (ODP) is nearly 0, and the global warming potential (GWP) is low. 3) Good drying properties allow for one-component cleaning through natural drying after washing. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substance Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law on Promotion of Measures Against Global Warming g. REACH, RoHS2 【Main Applications】 1) Cleaning of mineral oil-based processing oils 2) Hand wiping cleaning of molds, rolls, etc. 3) Cleaning of uncured polyurethane resins and nozzle cleaning ★ For product details, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

The fluorine-based cleaning agent "eClean 21 HFE-100," which does not contain HFC, can be used directly with the existing "HFC-365mfc" equipment. Main Features: 1) Does not contain HFC, bromine, or chlorine-based solvents 2) Comparable drying performance to HFC 3) Can be used directly with existing "HFC-365mfc" equipment 4) Not subject to the Fire Service Act! Not subject to the PRTR Act! Not subject to the Organic Chemicals Control Law! Not subject to the Poisonous and Deleterious Substances Control Law 5) Not subject to "Article 57-3 of the Industrial Safety and Health Act regarding risk assessment implementation" ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

The hydrocarbon-based cleaning agent "e Clean 21C-237" is suitable as a substitute for methylene chloride (dichloromethane) and for cleaning other uncured resins. Main Features: 1) For cleaning nozzles of uncured urethane and uncured epoxy resins!! 2) Does not contain halogen compounds such as bromine or chlorine! 3) Excellent dissolving power against oily and water-based stains! 4) Not subject to organic regulations, specific regulations, PRTR law, or toxic substances control law!! 5) Can be proposed in containers other than drums, such as pails! ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

【Main Features】 - It enables "degreasing cleaning" and "silicone oil cleaning" without damaging resins with low chemical resistance such as polycarbonate (PC) and ABS. - As a pseudo-azeotropic composition, it can be used with existing equipment for chlorine-based, bromine-based, and fluorine-based cleaning agents, and it allows for distillation regeneration. - It is not subject to any of the Organic Law, Special Law, Fire Service Act, or PRTR Law. - It has a lower specific gravity than "HCFC-225," providing more volume at the same weight, making it cost-effective. - It can also be used as a substitute for "HFC-365" products. ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

"Nexia A-6" is a cleaning agent that has become a trend in the recent automotive industry, focusing on environmental considerations, leading to increased inquiries from automotive maintenance shops. It also demonstrates excellent effectiveness in cleaning uncured resins. Particularly, it is not subject to many regulations, including the Fire Service Act, Organic Solvent Control Act, Specific Chemical Substances Control Act, PRTR Law, and Kigali Amendment, making it an environmentally friendly fluorine-based cleaning agent that is also recyclable. 【Main Features】 (1) It offers excellent cost performance compared to other HFO-based cleaning agents! (2) Existing cleaning equipment previously using "HCFC-225" can be utilized! (3) Distillation regeneration is possible! (4) There are few regulatory restrictions! - Not subject to the Organic Solvent Prevention Regulations (Organic Solvent Control Act) - Not subject to the Specific Chemical Substances Hazard Prevention Regulations (Specific Chemical Substances Control Act) - Not subject to the Fire Service Act - Not subject to the PRTR Law - Not subject to the Kigali Amendment 【Main Applications】 (1) Cleaning of uncured resins (2) Metal degreasing cleaning (3) Cleaning of silicone oils or as a diluent! (4) As a substitute for "HCFC-225"! (5) Hand cleaning of oily stains! ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

The "e Clean 21 HFE-401" is a fluorinated cleaning agent suitable for degreasing and cleaning. It is a new type of product that achieves high cleaning power without using brominated solvents. It has no flash point and can be used as an alternative to trichloroethylene, methylene chloride, and brominated solvents, and it is also compatible with existing equipment. ● Main features of "e Clean 21 HFE-401": 1) Ozone depletion potential (ODP) is zero. 2) Global warming potential (GWP) is also low. 3) High cleaning power (KB value is approximately 100). 4) Non-flammable (not subject to fire service law). 5) Not subject to major international regulations: a. REACH b. GADSL c. IEC62474 d. Montreal Protocol Kigali Amendment, RoHS2, etc. 6) Can be used as a degreasing agent for mineral oils, → Existing equipment and devices using chlorine and bromine compounds can also be utilized! <Main information regarding GHS classification and others> No relevant information on carcinogenicity or reproductive toxicity. Occupational exposure limit concentration: 150 ppm. Classified as a Type 1 organic solvent (under the Organic Solvents Regulation). Subject to the Water Pollution Control Law and the Soil Contamination Countermeasures Law. ★ For product details, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

The "eClean 21B Series" is a bromine-based cleaning agent that is more affordable than existing bromine-based cleaners. Furthermore, it excels in cleaning power and drying properties, and it is a cost-performance-focused cleaning agent with regulatory compliance equivalent to existing products. The cleaning tasks it specializes in include: - Degreasing cleaning of press oils, processing oils, and mineral oils - Cleaning of flux - Cleaning of uncured urethane and uncured epoxy resin adhered to nozzles This product is ideal for those who are dissatisfied with the price of their current bromine-based cleaning agents, as well as for those using methylene chloride or trichloroethylene who are struggling with regulatory compliance. 【Main Features】 (1) More affordable than existing bromine-based cleaning agents! (2) Fewer regulatory restrictions (same as existing products) - Not subject to the Fire Service Act - Not subject to the Organic Solvent Prevention Regulations - Not subject to the Specific Chemical Substance Hazard Prevention Regulations - Not subject to the Poisonous and Deleterious Substances Control Act (3) Compatible with a wide range of cleaning methods - Suitable for steam cleaning, scrubbing, rinsing, hand wiping, and ultrasonic cleaning (4) Existing cleaning equipment can be used *For more details, please be sure to check the catalog.

• Medicines

By immersing at room temperature, it is possible to dissolve silicone resin. Additionally, due to its high transparency, it allows for work to be carried out while checking the condition of the workpiece during processing. It is also a type of resin solvent that features low consumption due to volatilization and minimal odor generation. **Main Features of Kaneko Chemical's 'eSolv 21RC-1'** (1) Higher transparency than conventional silicone resin solvents, allowing for confirmation of the condition during processing. (2) Low consumption and odor generation due to volatilization. (3) Enables the dissolution of silicone resin by immersion at room temperature. *This product is classified as [Dangerous Goods Class 4 Flammable Liquids, Non-Aqueous Liquids of the Second Petroleum Category]. ★ Please also check the product documentation. Feel free to contact us for inquiries or consultations! → This product has not been verified with all 'silicone resin' products. Please conduct preliminary confirmation tests with your actual samples.

• Medicines
• Safety and consumables

"Nexia A-2B" is a new fluorinated cleaning agent of the pseudo-azeotropic type, which can be used with existing chlorine-based, bromine-based, and fluorine-based equipment. It demonstrates particularly excellent performance in flux cleaning. Furthermore, it is compliant with fewer regulatory restrictions, as it is not subject to the Fire Service Act, the Organic Solvent Control Act, the Specific Chemical Substances Hazard Prevention Act, or the PRTR Act, making it an environmentally friendly fluorinated cleaning agent that can also be recycled. *The "Nexia A-2" for immersion cleaning is also available in the lineup. 【Main Features】 (1) Superior in flux cleaning compared to other HFO-based cleaning agents! (2) Existing cleaning equipment that used "HCFC-225" can be utilized! (3) Distillation regeneration is possible! (4) Fewer regulatory restrictions! - Not subject to the Organic Solvent Control Act - Not subject to the Specific Chemical Substances Hazard Prevention Act - Not subject to the Fire Service Act - Not subject to the PRTR Act - Not subject to the Poisonous and Deleterious Substances Control Act 【Main Applications】 (1) Flux cleaning (2) Metal degreasing cleaning (3) Cleaning of silicone oil or as a diluent! (4) As a substitute for "HCFC-225"! ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

The "eSolv 21KZE-300" is a revolutionary solvent that allows for the easy removal of polyimide resin coated on materials such as optical fibers simply by soaking. Existing products often fall under legal regulations such as the Poisonous and Deleterious Substances Control Law, making them difficult to handle. The "eSolv 21KZE-300" is a user-friendly solvent that meets the needs of customers who cannot use toxic substances due to internal regulations. Of course, it is also not subject to fire safety laws, so it does not cause difficulties in storage. Additionally, its solubility is persistent, allowing for repeated use, which is another feature. 【Features】 ■ Not subject to fire safety laws, organic regulations, or the Poisonous and Deleterious Substances Control Law ■ Minimal risk of damaging the target material ■ Low heating temperature, suitable for energy-saving measures, and safe *We have received inquiries from manufacturers in various industries! *For more details, please download the catalog or contact us.

• Medicines

There are many successful applications of acrylic resin, polycarbonate resin (PC), and ABS resin adhesives, as well as their use as alternatives to chlorine-based solvents like methylene chloride. This is a new brominated solvent (adhesive) that is not subject to the Fire Service Act, the Poisonous and Deleterious Substances Control Act, the Organic Solvent Poisoning Prevention Act, or the Specific Chemical Substances Hazard Prevention Act, making it less regulated and safe to use. Please give it a try. **Main Features of Kaneko Chemical's "eSolv 21RA-1":** (1) Proven track record as an adhesive and solvent for acrylic resin, PC resin, and ABS resin. (2) Many successful applications as a substitute for methylene chloride (dichloromethane). (3) Easy to handle due to fewer regulatory restrictions: - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act - Not subject to the Organic Solvent Poisoning Prevention Act - Not subject to the Specific Chemical Substances Hazard Prevention Act **Main Application Examples of "eSolv 21RA-1":** (1) As an adhesive and solvent for acrylic resin, PC resin, and ABS resin. (2) Removal of acrylic coatings and similar substances. (3) Removal of epoxy resin and urethane resin adhered to nozzles. ★ Please also check our product catalog (with photos). Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables
• Subsidiary materials

Kaneko Chemical Co., Ltd., which specializes in environmentally friendly cleaning agents and resin solvents, has launched an online store for resin solvents called "Youkaizai.com" as of April 1, 2020. https://youkaizai.com/ Currently, we are focusing on products aimed at dissolving epoxy resins, urethane resins, and silicone resins, which have been in high demand. Products can be purchased starting from 100g. In the future, we will continue to propose products that meet customer needs through our online store. If you have any questions or inquiries, please feel free to contact us. We also welcome requests for specific types of solvents you would like to see. We look forward to hearing from you, regardless of industry.

• Other flooring materials

This is a powerful solvent with excellent performance that can dissolve not only silicone-based compounds but also modified silicone compounds (rubber, cured adhesives, caulking agents) that have been difficult to dissolve until now, as well as nylon. It can easily dissolve them just by immersing them in the liquid at room temperature! It is a new fluorine-based solvent that is not subject to the Fire Service Act, the Organic Solvents Control Act, or the Specific Chemical Substances Control Act, and has few regulatory restrictions, ensuring safety. **Main Features of Kaneko Chemical's 'eSolv 21RX':** (1) Dissolution is possible in a shorter time than conventional silicone solvents! (Compared to our products) (2) It can also dissolve modified silicone cured products depending on the type! (3) It does not contain chlorine-based or bromine-based solvents! It is a fluorine-based solvent. (4) There are few regulatory restrictions! - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act - Not subject to the Organic Solvents Poisoning Prevention Regulations - Not subject to the Specific Chemical Substances Hazard Prevention Regulations **Main Applications of 'eSolv 21RX':** (1) Dissolution of silicone-based compounds (rubber, adhesives, caulking agents, etc.) (2) Dissolution of modified silicone compounds (3) Dissolution of nylon (polyamide, etc.) (4) Dissolution of urethane cured products ★ Please also check the product catalog. Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables

"eSolv 21CF" is an environmentally friendly fluorinated solvent. It is a new type of solvent that achieves high solubility without containing brominated solvents. ● Main features of "eSolv 21CF": 1) Ozone Depletion Potential (ODP) is zero. 2) Global Warming Potential (GWP) is also low. 3) Not subject to the Fire Service Act. 4) Not subject to major international regulations: → a. REACH b. GADSL c. IEC62474 d. Montreal Protocol Kigali Amendment, etc. 5) High solubility... Proven mainly with acrylic resins. 6) Can also be used as a degreasing cleaner. → Compatible with existing chlorine and bromine-based equipment and devices! ★ For product details, please refer to the materials. Feel free to contact us with any inquiries.

• Safety and consumables

A powerful solvent with excellent decomposition performance not only for silicone-based compounds but also for modified silicone compounds (hardened adhesives, caulking agents, rubber) that have been difficult to dissolve until now. Furthermore, it dissolves simply by immersing it in a liquid at room temperature! It is a new fluorine-based solvent that is not subject to the Fire Service Act or organic regulations, with minimal legal restrictions and consideration for safety. **Main Features of Kaneko Chemical's 'eSolv 21RZ'** (1) Dissolution is possible in a shorter time than conventional silicone solvents! (Compared to our products) (2) Depending on the type, it can also dissolve modified silicone hardeners! (3) Does not contain chlorine-based or bromine-based solvents! It is a fluorine-based solvent. (4) Minimal legal restrictions! - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act - Not subject to the Organic Solvent Poisoning Prevention Regulation - Not subject to the Specific Chemical Substances Hazard Prevention Regulation **Main Applications of 'eSolv 21RZ'** (1) Dissolution of silicone-based compounds (adhesives, caulking agents, rubber, etc.) (2) Dissolution of modified silicone-based compounds (3) Dissolution of polyamides (nylon, etc.) (4) Dissolution of urethane hardeners ★ Please also check the product information. Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables

Kaneko Chemical's fluorine-based cleaning agent "eClean 21FH Series" excels in the dilution and cleaning of fluorine-based lubricants (oils), has minimal legal regulations as it is not subject to the PRTR Law or the Fire Service Law, and is environmentally friendly. **Main Features of Kaneko Chemical's "eClean 21FH Series"** (1) Proven performance for dilution and cleaning of fluorine-based lubricants (oils)! → Particularly compatible with "Fomblin® PFPE lubricants"! (2) Suitable for dilution of fluorine-based coatings! (3) Used as a testing solvent for reliability tests! (4) Price competitive! (5) Does not contain chlorine-based solvents! (6) Minimal legal regulations! - Not subject to the Organic Solvent Poisoning Prevention Regulations (not subject to the Organic Solvent Regulations) - Not subject to the Specific Chemical Substance Hazard Prevention Regulations (not subject to the Specific Chemical Regulations) - Not subject to the Fire Service Law - Not subject to the PRTR - Not subject to the Poisonous and Deleterious Substances Control Law (7) Alternative to "HCFC-225" ★ For more product details (lineup), please refer to the materials. Feel free to contact us with any inquiries. * "Fomblin®" is a registered trademark of the Solvay Group.

• Safety and consumables

"eClean 21B" is a bromine-based cleaning agent (purging agent) that specializes in cleaning uncured urethane nozzles and uncured epoxy nozzles. It has also proven effective on solid urethane. With few regulatory restrictions, good drying properties, and excellent cost performance, we encourage you to give it a try. 【Main Features】 (1) Excellent at nozzle cleaning (as a purging agent) (2) Does not contain chlorine-based solvents, yet has cleaning power equivalent to chlorine-based solvents (3) Few regulatory restrictions - Not subject to the Fire Service Act - Not subject to the Organic Solvent Poisoning Prevention Regulations (Organic Solvent Regulations) - Not subject to the Specific Chemical Substance Hazard Prevention Regulations (Specific Chemical Regulations) (4) Proven effectiveness in dissolving acrylic resin and polycarbonate resin (5) Proven effectiveness in dissolving solid urethane ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Interior and exterior construction accessories

The "eSolve 21KZE-100" is a revolutionary solvent that can easily remove polyimide resin coated on optical fibers and other materials simply by soaking for about 10 minutes. The operating temperature is between 40°C and 60°C, eliminating the need for boiling, allowing for safe work. Additionally, it requires less heating energy than concentrated sulfuric acid, making it energy-efficient. If the temperature can reach around 80°C, even greater effects can be expected. Moreover, its solubility is persistent, allowing for repeated use, which is another feature. 【Features】 ■ There are cases where removal was achieved with a 10-minute immersion at 40°C. ■ There is almost no risk of damaging the target object. ■ The low heating temperature is suitable for energy-saving measures and is safe. ■ It is not subject to the Fire Service Act or the Organic Solvent Law. *We have received inquiries from manufacturers in various industries! *For more details, please download the catalog or contact us.

• Medicines

The epoxy resin solvent and stripping agent 'e Solv 21HEK' swells, collapses, and strips cured (hardened) epoxy resin by immersion. Additionally, it has no flash point and is low in toxicity, making it easy to handle and contributing to reduced environmental impact. It does not contain chlorine-based solvents commonly found in other products! Past achievements include: - Dissolving and stripping epoxy resin on substrates - Opening encapsulants on substrates (for good product analysis and defect analysis) - Removing epoxy resin for SEM observation - Opening power cards - Cleaning dispenser nozzles contaminated with two-component epoxy adhesives If you are having trouble with cleaning or dissolving epoxy, please feel free to contact us. 【Features】 ■ Not subject to organic regulations, specific regulations, or fire laws ■ Low environmental impact, safe to work with ■ Non-combustible and non-water-soluble ■ Significantly reduces dissolution time ■ No chlorine-based solvents used! *For more details, please refer to the catalog. Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables

The hydrocarbon-based cleaning agent "e Clean 21C-337" is a revolutionary cleaning agent that has significantly improved four issues that were challenges for conventional products: 1) recyclability 2) odor 3) drying properties 4) packaging. For small-scale cleaning, it can be used for jab washing and hand wiping, and it can naturally be used in existing hydrocarbon-based cleaning machines. Main features: 1) Better drying properties than other well-known hydrocarbon-based cleaning agents! 2) Low odor (only a slight smell) that does not evoke petroleum scents! 3) Fewer impurities than competitor products, leading to better regeneration efficiency and cost-effectiveness! 4) Not subject to organic regulations, PRTR, or risk assessment!! 5) Can be offered in containers other than drums, such as pails and one-gallon cans! *For more details, please refer to the PDF materials or feel free to contact us.

• Car and bicycle parking facilities

The urethane resin solvent and release agent "eSolv 21HUK" is a solvent that dissolves cured urethane resin. It has a proven track record in nozzle cleaning on manufacturing sites, has few regulatory restrictions, and has received positive feedback from users. Additionally, there has been an increase in inquiries from construction sites recently. We welcome inquiries from construction and building contractors, building material wholesalers, interior contractors, and those in the interior design industry. The product has no flash point and is low in toxicity, making it easy to handle and contributing to reduced environmental impact. 【Features】 ■ Proven track record in cleaning urethane adhered to nozzles ■ Proven track record in opening urethane resin potting agents ■ Not subject to organic regulations, specific regulations, or fire laws ■ Low environmental impact and safe to work with ■ Significantly reduces dissolution time *For more details, please refer to the catalog.

• Medicines
• Safety and consumables

The solid resin dissolving and stripping agent "eSolve 21 Series" is a product that can be used as an alternative to strong acid and strong alkaline solvents. Additionally, it has no flash point and is low in toxicity, making it easy to handle and contributing to reduced environmental impact. It is ideal for those who want to "improve the working environment without compromising dissolving power." We have also created a "Resin Solvent Case Study Collection." It introduces dissolving cases and processes for different resins, complete with photographs. Please download it from the link below【PDF Download】 and make use of it. 【Features】 ■ Not subject to organic regulations or specific regulations ■ Low environmental impact and safe to work with ■ Non-flammable and non-water-soluble ■ Capable of dissolving solid resins with organic solvents ■ Cleaning of medical instruments after use in hospitals *For more details about the product, please refer to the catalog and case study collection. Feel free to contact us with any inquiries.

• Medicines

"eSolve 21RS" is a solvent with excellent dissolving power for silicone resins (silicone rubber, silicone grease). It dissolves silicone resins simply by immersion. Additionally, it becomes even more powerful when heated! Silicone rubber (RTV) dissolves in about 20 minutes, losing its shape. It can also be used for cleaning cosmetic manufacturing kettles, cleaning cosmetic piping, and cleaning piping in food factories. There are also proven results for dissolving POM (polyacetal) and PA66 (nylon). [Main Uses] ■ Cleaning of kettles and piping in cosmetic factories ■ Cleaning of piping in food factories ■ Cleaning of endoscopes ■ Opening sealants on power supply boards *For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Medicines

The "eSolve 21AM-1" is a powerful epoxy-based resin release agent (solvent). It removes resin by dissolving or causing slight swelling, leading to flaking and separation. It is also effective on urethane-based resins. Additionally, there has been an increase in inquiries from the lens industry. Features: - Dissolution and removal of epoxy and urethane resins - Treatment of workpieces that can only be released by physical force - Reduction of working time - Performance significantly improves with heating - Particularly effective at temperatures above 80°C - Proven results in lens release - Numerous successful cases of ink removal from lens coatings - Proven results in retrieving samples after SEM observation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety and consumables

The urethane resin solvent and release agent "eSolv 21HUK" is a product targeted at urethane resins. Additionally, it has no flash point and low toxicity, making it easy to handle and contributing to reduced environmental impact. If you are having trouble cleaning cured urethane in injection devices, cleaning cured urethane in nozzles, or maintenance after work, please feel free to contact us. 【Features】 ■ Not subject to organic regulations, specific regulations, or fire laws ■ Low environmental impact and safe to work with ■ Non-combustible and non-water-soluble ■ Significantly reduces dissolution time ■ Proven track record in cleaning urethane adhered to nozzles ■ Proven track record in opening potting agents for urethane resins *For more details, please refer to the catalog. Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables

The "e Clean 21N Series" is a bromine-based cleaning agent designed for various products with minimal regulatory restrictions, excellent cleaning power and drying properties, and is environmentally friendly. It is suitable for various cleaning methods, including steam cleaning, jab washing, spray washing, hand wiping, and ultrasonic cleaning. This product is ideal for those who are struggling with regulatory compliance when using methylene chloride or trichloroethylene. There are also products available for aluminum, silver, and silver-plated items. 【Main Features】 (1) Minimal regulatory restrictions - Not subject to the Organic Solvent Prevention Regulation (Organic Regulation) - Not subject to the Specific Chemical Substance Hazard Prevention Regulation (Specific Regulation) - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act (2) Excellent cleaning power and drying properties - No discoloration of aluminum and silver products! (3) Compatible with various cleaning methods - Supports steam cleaning, jab washing, spray washing, hand wiping, and ultrasonic cleaning (4) Environmentally friendly - Recyclable *For more details, please refer to the PDF materials or feel free to contact us.

• Medicines

A solvent with excellent dissolving power to decompose silicone-based compounds (hardened adhesives, silicone rubber). It easily dissolves silicone resin just by immersion. [Silicone Solvent eSolve 21RS]

• Medicines

At Kaneko Chemical, we have leveraged our long-standing expertise in "cleaning agent technology, recycling technology," "cleaning process technology," and "cleaning equipment technology" to solve our customers' challenges related to 'cleaning.' Currently, we offer a wide range of environmentally friendly fluorine-based cleaning agents that are low in toxicity, have an ozone depletion potential of zero, and a small global warming potential, as well as eco-friendly resin solvents that effectively dissolve, strip, and swell resins (epoxy, urethane, silicone) before and after curing while minimizing toxicity. If you have any concerns regarding 'cleaning,' please feel free to consult with Kaneko Chemical! *For more details, please download our catalog or contact us.

• Medicines

The "Resin Solvent eSolve 21 Series" developed by Kaneko Chemical is a powerful solvent that dissolves, removes, and swells resins (epoxy, urethane, silicone) both before and after curing, while also being an environmentally friendly resin solvent with reduced toxicity. Traditionally, many cleaning agents with a significant environmental impact or hazardous cleaning agents subject to fire safety regulations have been used. This product is suitable for those looking to improve the working environment without compromising dissolving power! For more details, please download the catalog or contact us.

• Medicines

The eAqua21 series is a water-based cleaning agent for metal processing parts, glass and resin substrates, and optical lens cleaning. It naturally has excellent cleaning properties, does not contain LAS in its ingredients, and has lower BOD and COD values compared to competitor products, which reduces the burden of wastewater treatment. The rinsing properties after cleaning are also excellent. There are many achievements in overseas locations.

• Medicines

The "e Clean 21N Series" is a cleaning agent that has cleaning power and drying properties equivalent to those of chlorine-based cleaning agents, and it is easy to handle with no flash point. It does not contain solvents that fall under the organic solvent prevention regulations, and it is an environmentally friendly product with ozone depletion and global warming coefficients that are extremely close to zero. Chlorine-based cleaning equipment can be used as is, and installing a recycling recovery device is effective for obtaining and maintaining ISO 14000 certification. [About the main component 1-bromopropane] https://bromocarbon.org/ The main component of bromine-based cleaning agents, "1-bromopropane," currently has no usage restrictions or legal regulations on management concentration. Even if regulations regarding management are decided in the future, we, the related organizations, will gather and discuss to ensure that customers can continue to use it safely on-site, and we will engage in activities to make good proposals in the preliminary stages of regulatory value discussions.

• Medicines

Traditionally, for the dissolution, swelling, and peeling of cured epoxy resins, many cleaning agents with a significant environmental impact or even hazardous cleaning agents that fall under fire safety regulations have been used. Kaneko Chemical has developed eSolve 21HEK to address these issues. (Patent applications filed domestically and internationally)

• Medicines

This is a solvent designed for the separation of defective products made of rubber, plastic, and metal. It exhibits excellent dissolving power, is non-flammable (not subject to fire regulations), making it easy to handle, has low toxicity, and is an environmentally friendly solvent.

• Medicines

A solvent with excellent dissolving power that decomposes silicone-based compounds (hardened adhesives, silicone rubber). It dissolves silicone resin simply by immersion. Additionally, it becomes even more powerful when heated! Feel free to contact us for inquiries or consultations!

• Medicines
• Safety and consumables

The odorless cleaning agent "e Clean 21N" has cleaning power and drying properties equivalent to trichloroethylene and methylene chloride, and is an easy-to-handle cleaning agent with no flash point. It does not contain chlorine-based solvents or solvents that fall under the organic solvent prevention regulations, and it is an environmentally friendly product with ozone depletion and global warming coefficients that are extremely close to zero. It can be used with cleaning equipment for trichloroethylene and methylene chloride, and by installing a recycling recovery system (distillation regeneration system), it reduces costs and environmental impact.

• Medicines
• Safety and consumables