エクセリ List of Products and Services

● The IP210H1 rental device is a wireless mobile IP phone that allows nationwide calls in Japan using the au 4G/LTE network. ● It can be used without a license. Rentals are available for periods starting from one day across Japan. ● With the standard rental plan, it can be used in IP wireless mode (LTE). *Note: Using it as a WLAN transceiver or IP phone (landline/internal phone) requires prior configuration, making it suitable for long-term rental (subscription) plans. ● There are no communication fees for rentals. ● Supports simultaneous calls. Primarily, it operates like a mobile phone with one-on-one communication, but it also supports multi-party calls where a third party can join the conversation at any time without waiting for the end of a conversation. Essentially, there is no limit on the number of simultaneous calls. *Note: Simultaneous calls can be made even without using an earphone microphone. ● You can also choose a speaker microphone instead of an earphone microphone. ● It maintains IP57 waterproof and dustproof performance, functioning without issues even when used outdoors. *For more details, please refer to the PDF document or feel free to contact us.

• Radios, walkie-talkies, and intercoms

●BP-315 (BP315) is a lithium-ion battery manufactured by Icom. The manufacturer's model number is BP-315#18. ●It is a high-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ●The battery capacity is 3150mAh/7.2V. ●The operating time is as follows: ・When used in LTE mode with IP510H: Approximately 26 hours ・When used in WLAN mode with IP510H: Approximately 58 hours ●The charging time is as follows: ・When using AC adapter BC-258: Approximately 200 minutes ・When using the connected charger BC-269: Approximately 240 minutes ●The waterproof performance is based on the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.

• others

● The AX-HM250 (AXHM250) is a helmet mount manufactured by Zacty Corporation. ● It is a helmet mount for the CX-WE100 camera, which is used for stabilizing footage while mounted on a helmet. ● It is convenient for hands-free video recording from the wearer's perspective. ● The mounting position can be switched between left and right. ● The camera unit can be attached and detached with one touch. ● It can also be replaced with the included fixed arm. *For more details, please contact our company.*

• others

The USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by Elecom. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT with the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding connectors).

• others

The IM-5A-019 (IM5A019) is an earphone microphone (PTW25) for the IM-560 and IM-530 made by Mobile Create. It can be used with Mobile Create's IP radios such as the iMESHIM-530, IM-550, and IM-560. You can transmit by pressing the PTT button on the microphone. Voice is sent from the microphone, and received audio can be heard through the earphones. The earphone (Φ3.5-3 pole straight) IM-5A-020 is included. *For more details, please feel free to contact us.

• others

The CF-SDM300 (CFSDM300) is a loudspeaker manufactured by Comforce Co., Ltd., a group company of Icom. By simply wearing a headset, you can amplify your voice while keeping both hands free. It can be attached in two ways: with a clip that hooks onto a waist belt or with a strap that can be worn crosswise. With a speaker output of 10W, it can produce loud sounds. It is also capable of playing pre-saved MP3 music/audio data from a USB memory or microSD card. It can be used for in-house presentations, lectures/classes, tour guiding, caregiving, sports, POP displays, exhibitions, tasting sales, public relations, events, and evacuation guidance during disasters. *For more details, please feel free to contact us.*

• others

●B151101 (B-151101) is a microphone made by ON'S COMPANY. ●It can be used with the wireless guide system Bb Guide. This microphone is used for transmission. ●You can secure the microphone to your chest or collar using the clip attached to the microphone tip. ●The microphone comes with a windscreen cap to cut out noise from wind interference. ●It is a standard component of the Bb Guide system. It can be purchased as a spare or replacement. *For more details, please feel free to contact us.*

• others

The HM-257SJ (HM257SJ) is an earphone microphone made by Icom. It is an earphone microphone for Icom's 9-pin spring connector digital simple radios and commercial radios. It is a set that includes an earhook earphone and a PTT lapel microphone. There is a metal clip on the back of the microphone, allowing it to be attached to clothing. It is a lightweight type. *For more details, please feel free to contact our company.

• others

●KT001 (KT-001) is a noiseless microphone made by KTEL. ●It is a noiseless microphone specifically designed for jet-type helmets. ●This microphone is mounted on a jet-type helmet when using a radio in motorcycles and other vehicles. ●It is a wind noise canceling microphone, making it difficult to pick up wind noise while riding. ●The length of the flexible pipe is 180mm. ●Modification of the helmet is required. *For more details, please feel free to contact our company.*

• others

●KTM001 (KTM-001) is a new compact, lightweight, noise-free microphone manufactured by KTEL. ●It is a microphone specifically designed for use with jet-type helmets with a front shield when using a radio on a motorcycle. ●The pipe length is 180mm. ●It suppresses noise and allows for clear audio transmission. ●It is compact and lightweight. ●Helmet modification is required. *For more details, please feel free to contact our company.*

• others

●KT002 (KT-002) is a noiseless microphone made by KTEL. ●It is a noiseless microphone specifically designed for full-face helmets when using a radio on a motorcycle. ●Since it is a noise-canceling microphone, it is easy to communicate even while riding. ●It is necessary to make a microphone mounting hole with a diameter of about 28mm on the pilot surface in front of the helmet's mouth. *For more details, please feel free to contact us.*

• others

● KT003 (KT-003) is a noiseless microphone made by KTEL. ● It is a half-type helmet microphone specifically designed for use with radios on motorcycles. ● Since it is a noise-canceling microphone, it is easy to communicate even while riding. ● The flexible pipe is 210mm long. ● Please create a microphone mounting hole with a diameter of 4mm by peeling back the inner lining on the left side of the helmet. To maintain the helmet's strength, please make the hole as close to the bottom edge as possible. *For more details, please feel free to contact us.*

• others

●KTM002 (KTM-002) is a new compact, lightweight, noise-free microphone made by KTEL. ●It is a microphone specifically designed for full-face helmets when using radios on motorcycles and other vehicles. ●It suppresses noise and allows for clear audio transmission. ●It is small and lightweight. *For more details, please feel free to contact our company.*

• others

● KT004 (KT-004) is a 1-speaker set made by KTEL. ● It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle or similar vehicles. ● It suppresses noise and allows for clear audio transmission and reception. ● It is compact and lightweight. ● It comes with a volume adjustment feature. ● There is one speaker. ● Drilling into the helmet is required. *For more details, please feel free to contact our company.*

• others

●KT005 (KT-005) is a 2-speaker set (mono) made by KTEL. ●It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle. ●It is a mono type. ●It comes with a volume adjustment feature. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●There are two speakers. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KT006 (KT-006) is a 2-speaker set (stereo) made by KTEL. ●It is a speaker microphone specifically designed for full-face helmets when using a radio on a motorcycle or similar. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is stereo type. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.

• others

The KTM004 (KTM-004) is a compact noise-free microphone kit for full-face helmets made by KTEL. It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. It features a volume adjustment function. There is one speaker. It suppresses noise and allows for clear audio transmission and reception. It is small and lightweight. Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KTM006 (KTM-006) is a compact noise-canceling microphone kit for full-face helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-canceling microphone. ●It comes with a volume adjustment function. ●It reduces noise and allows for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KT007 (KT-007) is a 1-speaker set with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There is one speaker. ●Drilling a hole in the helmet is required. *For more details, please feel free to contact our company.

• others

●KT008 (KT-008) is a 2-speaker set/monoral with volume adjustment made by KTEL. ●It is a speaker microphone specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is monoral. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*

• others

●KT009 (KT-009) is a 2-speaker SET/stereo with volume adjustment made by KTEL. ●It is a microphone speaker specifically designed for jet-type helmets when using a radio on a motorcycle. ●It suppresses noise and allows for clear audio transmission and reception. ●It is compact and lightweight. ●It comes with a volume adjustment feature. ●There are two speakers. ●It is stereo. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.

• others

●KTM007 (KTM-007) is a compact noiseless microphone kit for jet helmets made by KTEL. ●It is a microphone speaker specifically designed for full-face helmets when using a radio on a motorcycle or similar vehicles. ●It comes with a volume adjustment feature. ●There is one speaker. ●It suppresses noise and allows for clear audio transmission and reception. ●It uses a new type of small and lightweight microphone. ●Drilling holes in the helmet is required. *For more details, please feel free to contact our company.*

• others

●KTM009 (KTM-009) is a compact noise-free microphone kit for jet helmets made by KTEL. ●It is a microphone and speaker specifically designed for use with radios on motorcycles and similar vehicles. ●It is a stereo type. ●There are two speakers. ●It features a new compact noise-free microphone. ●It has a volume adjustment function. ●It suppresses noise, allowing for clear audio transmission and reception. ●Drilling holes in the helmet is required. *For more details, please feel free to contact us.*

• others

● The AN-23 (AN23) is a smartphone-specific ear-hook type earphone microphone made by F.R.C. ● It is designed for smartphones equipped with a φ3.5mm phone plug. It can be used with transceiver apps like LINE WORKS installed on your smartphone. ● The ear-hook design makes it less likely to fall out of your ear. ● There is a clip on the back of the lapel microphone. ● A short press of the PTT button starts transmission, and pressing it again returns to receiving. ● When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. ● The PTT button can also control music apps. For example, play/pause is a short press, and skipping tracks is a double press. *For more details, please feel free to contact us.*

• others

The AN-24 (AN24) is a canal-type earphone microphone specifically designed for smartphones, manufactured by F.R.C. It is compatible with smartphones equipped with a φ3.5mm phone plug and can be used with transceiver apps like LINE WORKS installed on your smartphone. The canal type that fits inside the ear provides high sound insulation and a structure that is less likely to fall out of the ear. There is a clip on the back of the tie-pin microphone. A short press of the PTT button starts transmission, and pressing it again returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, for example: short press for play/pause, double press to skip tracks. *For more details, please feel free to contact us.

• others

The AN-26 (AN26) is a tie-pin type PTT microphone designed specifically for smartphones, manufactured by F.R.C. Since it is just the microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook earphone FEP-202 - Canal type earphone FEP-203 - D-type hook earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. Pressing the PTT button briefly starts transmission, and pressing it again briefly returns to reception. When a call comes in, pressing the PTT button answers the call, allowing for simultaneous conversation. Pressing it again ends the call. The PTT button can also be used to control music apps, such as play/pause with a short press and skipping tracks with a double press. For more details, please feel free to contact us.

• others

The AP-26 (AP26) is a tie-pin type PTT microphone with a built-in battery, designed specifically for smartphones by F.R.C. Since it is just a microphone, please use it in combination with separately sold φ2.5mm earphones. The recommended earphones from the manufacturer are as follows: - Inner type earphone FEP-201 - Ear hook type earphone FEP-202 - Canal type earphone FEP-203 - D-type hook type earphone FEP-204 - Ear pad hook type earphone FEP-205 - Ear hook speaker type earphone FEP-206 You can use it with a smartphone equipped with a φ3.5mm phone plug and installed with transceiver apps like LINE WORKS. There is a clip on the back of the tie-pin microphone. *For more details, please feel free to contact us.

• others

● The WX-ST200 (WXST200) is a handheld wireless microphone made by Panasonic. ● It is a wireless microphone for the Panasonic 1.9GHz digital wireless microphone system. ● It can be used in conjunction with wireless receivers WX-SR202DAN / WX-SR204DAN, additional wireless receiver WX-SE200DAN, WX-SR202A / WX-SR204A, WX-SE200A, antenna station WX-SR152, portable wireless amplifier WX-PS200, and others. ● With the adoption of a high compression audio codec, it offers a wide audio frequency range of 100Hz to 15kHz and a newly developed noise suppression feature for clear sound quality. ● The low-cut filter function reduces noise. ● It has an external input function, allowing you to easily connect various audio sources (such as computers and music players) for playback. * For more details, please feel free to contact us.

• others

The WM-3000A (WM3000A) is a speech wireless microphone manufactured by UNI-PEX Co., Ltd. It operates in the 300MHz band and supports 13 channels. It features a unidirectional electret condenser design, making it less likely to pick up surrounding noise. With a clear and defined sound quality, it is ideal for speech applications. It has obtained technical standard conformity certification. The microphone uses a crystal-controlled PLL synthesizer system, allowing the selection of any one of 13 frequencies for use. It also includes noise reduction and tone squelch features. The antenna is of the built-in type. It operates for approximately 32 hours on a single AA alkaline battery. *For more details, please feel free to contact us.*

• others

The 75CSSK2H (75-CSSK-2H) is a 75cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 75cm CS antenna. This antenna is designed to prevent snow damage, featuring a heater on the reflector and converter arm, as well as a converter roof. The compatible mast diameter is φ48.6mm to φ89.1mm. The antenna mount and CS converter unit are sold separately. It is a RoHS compliant product. It is compatible with J-Alert. *For more details, please feel free to contact us.*

• others

The 120CSSKH (120-CSSKH) is a 120cm snow-melting device-equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and compatible with J-Alert. *For more details, please feel free to contact us.*

• others

In firefighting activities, the rapid and reliable coordination among team members is a crucial factor that influences the success of rescue operations. Particularly in hazardous environments filled with flammable gases or dust, the safety of communication devices becomes the top priority. Traditional radios may have usage restrictions due to the risk of explosions, which can hinder coordination. The HP798Ex IIC, with its intrinsically safe explosion-proof design, enables safe communication even in such dangerous environments, ensuring both the safety of firefighters and effective collaboration. 【Usage Scenarios】 - Information sharing among team members at fire scenes - Coordination in hazardous material handling sites - Establishment of command and control systems in rescue operations 【Benefits of Implementation】 - Reliable communication within hazardous areas - Improved safety for team members - Accurate decision-making through rapid information transmission - Increased efficiency in rescue operations through smooth collaboration

• others

In airport control operations, there is a risk of flammable gases and dust arising from the handling of fuel and flammable materials, as well as work in maintenance areas. In such environments, the use of radios may be restricted; however, the HP798Ex IIC ensures safe communication through its intrinsically safe explosion-proof design. This helps prevent accidents and enhances the safety of control operations. 【Usage Scenarios】 - Aircraft refueling areas - Maintenance hangars - Areas around runways 【Benefits of Implementation】 - Reliable communication in hazardous areas - Improved safety of operations - Eased restrictions on radio use

• others

At wastewater treatment plants, it is essential to work in hazardous environments where flammable gases and dust can occur. Work instructions and communications must be carried out safely and reliably. Traditional radios may lack explosion-proof performance, posing risks of ignition or explosion. The HP798Ex IIC enables safe communication even in such hazardous environments due to its intrinsically safe explosion-proof design. 【Usage Scenarios】 - Work instructions within the wastewater treatment plant - Communication during inspection work - Information sharing in emergencies - Coordination between teams within the plant 【Benefits of Implementation】 - Ensuring a safe working environment - Improving work efficiency - Rapid information transmission - Reducing the risk of accidents

• others

In the grain silo industry, the risk of dust explosions is always present, and ensuring a safe working environment is the top priority. To prevent potential accidents, reliable communication methods are essential. Traditional radios have limitations for use in dusty environments, which can compromise communication reliability. The HP798Ex IIC, with its intrinsically safe explosion-proof design, can be safely used in hazardous areas where flammable dust is present. This enables quick and reliable information transmission among workers, strengthening the safety management system. 【Usage Scenarios】 * Communication during work inside grain silos * Emergency communication network * Communication during inspection work 【Benefits of Implementation】 * Reduced risk of dust explosions * Ensured safety for workers * Improved operational efficiency through rapid information transmission

• others

In the pharmaceutical manufacturing industry, safety management in the manufacturing process is the top priority. Particularly in areas where flammable gases or dust may be present, the selection of communication equipment becomes extremely important. To prevent any potential ignition or explosion, intrinsically safe explosion-proof radios are essential. The HP798Ex IIC is designed to safely share information even in such hazardous environments. 【Usage Scenarios】 - Communication in the manufacturing area of pharmaceutical factories - Information sharing in research and development facilities - Instruction transmission in quality control departments - Inventory management in warehouses - Communication during maintenance work 【Benefits of Implementation】 - Ensures safe communication in flammable gas and dust environments - Improves operational efficiency through rapid information transmission - Reduces the risk of accidents - Ensures compliance with regulations

• others

In the paint manufacturing industry, working in an environment where flammable gases and dust are constantly present is essential. In such environments, safety is the top priority, and communication methods must meet high safety standards. Traditional radios posed risks of ignition or explosion if their explosion-proof performance was inadequate. This product adopts an intrinsically safe explosion-proof structure, allowing for safe use even in hazardous areas where flammable gases and dust are present. It ensures both the reliability and safety of communication, contributing to improved work efficiency. 【Usage Scenarios】 - Communication of instructions within paint manufacturing plants - Contact at work sites handling flammable materials - Communication in environments with a risk of dust explosions 【Benefits of Implementation】 - Reduced risk of ignition and explosion - Ensured safe working environment - Improved work efficiency through rapid and reliable communication of instructions

• others

In flour mills, the risk of dust explosions is always present, and ensuring employee safety is the top priority. Rapid information transmission and accurate instructions at the work site are essential to minimize damage in the event of an accident. The intrinsically safe explosion-proof transceiver can be safely used in environments where flammable dust is present, enabling reliable communication. The HP798Ex IIC was developed to balance employee safety and operational efficiency in flour mills with a high risk of dust explosions. 【Usage Scenarios】 - Communication in areas with a risk of dust explosions - Work instructions on the production line - Rapid information sharing in emergencies - Coordination during inspection and maintenance work 【Benefits of Implementation】 - Reduces the risk of dust explosions and creates a safe workplace environment - Enables accurate information transmission with clear audio - Improves work efficiency through rapid coordination - Accelerates emergency response and minimizes damage

• others

In the mining industry, ensuring the safety of workers is the top priority. Particularly in hazardous areas where flammable gases and dust are present, the selection of communication equipment becomes crucial. Accurate location information is essential for rapid response in emergencies. Inappropriate communication methods can lead to delays in response during accidents. The HP798Ex IIC, with its intrinsically safe explosion-proof design, enables safe communication in hazardous areas and accurately transmits location information, thereby protecting the safety of workers. 【Usage Scenarios】 - Accurate location tracking of workers within the mine - Rapid communication and instruction delivery in emergencies - Safe communication within hazardous areas 【Benefits of Implementation】 - Ensuring worker safety - Rapid response in emergencies - Improved work efficiency

• others

In chemical plants, there is always a risk of explosions and fires due to flammable gases and dust, making safety management the top priority. In the event of an accident, rapid and accurate information transmission is essential, and radios play a crucial role. The HP798Ex IIC adopts an intrinsically safe explosion-proof structure, allowing it to be used safely in hazardous areas where flammable gases and dust are present. No licenses, qualifications, or applications are required. 【Usage Scenarios】 - Communication during work in chemical plants - Communication during hazardous material handling operations - Information transmission in emergencies - Communication during maintenance work - Communication for security personnel 【Benefits of Implementation】 - Safe communication in environments with high risks of explosions and fires - Faster accident response due to rapid information transmission - Ensuring the safety of workers - Compliance with regulations

• others

In the gas supply industry, monitoring operations must always consider the risk of flammable gas leaks, making safe communication methods essential. Particularly in hazardous environments such as gas leak detection and equipment inspections, the use of explosion-proof radios is required. The use of inappropriate communication devices can lead to explosion accidents. The HP798Ex IIC, with its intrinsically safe explosion-proof design, enables safe use in hazardous areas where flammable gases and dust are present. 【Usage Scenarios】 - Monitoring operations at gas plants - Inspections at gas supply stations - Loading operations on tank trucks - Communication during gas leak detection 【Benefits of Implementation】 - Reduces explosion risks and ensures worker safety - Improves emergency response capabilities through rapid information transmission - Enhances compliance with regulations and corporate image

• others

In the oil plant industry, there is always a risk of explosions due to flammable gases and dust, making rapid and reliable information transmission essential in emergencies. Traditional radios may lead to serious accidents due to inadequate explosion-proof performance. The HP798Ex IIC adopts an intrinsically safe explosion-proof structure (Ex ib IIC T4 Gb/ib IIIC T120°C Db), enabling safe use in hazardous areas where flammable gases and dust are present. This ensures rapid information transmission in emergencies and enhances the safety of the plant. 【Usage Scenarios】 * Emergency communication within the oil plant * Communication during maintenance work * Patrol operations within the plant 【Benefits of Implementation】 * Ensures safe communication in environments with high explosion risks * Minimizes damage through rapid information transmission in emergencies * Contributes to the safety of workers and the stable operation of the plant

• others

● The HP798Ex IIC (HP798Ex 2C) is a specific low-power intrinsically safe explosion-proof portable radio manufactured by Hytera. ● No license or qualifications are required. No application is necessary. ● It has an intrinsically safe explosion-proof structure that meets JIS standards. Ex ib IIC T4 Gb (gas) / ib IIIC T120°C Db (dust). It can be safely used in hazardous areas where flammable gases and dust are present. ● It is a certified model according to the Japan Factory Electrical Equipment Explosion Protection Guidelines (International Harmonized Explosion Protection Guidelines 2020), and complies with international explosion protection standards "IECEx" and European explosion protection standards "ATEX." ● It meets MIL-STD-810H for shock resistance and durability. ● It has the strongest dustproof and waterproof performance with an IP68 rating. ● The operating temperature range is from 25°C to 60°C. ● With AI noise canceling, it automatically removes noise according to the surrounding environment. ● It is equipped with a 2.4-inch LCD display. ● The battery life is as follows: - Included high-capacity battery (2,150mAh): up to 24 hours *Estimated time based on a transmission ratio of 5: reception 5: standby 90.

• others

●CSEA25 (CSEA-25) is a CS/BS preamplifier manufactured by Nippon Antenna. ●It has a maximum gain of 22dB. ●This preamplifier is compatible with 4K and 8K broadcasts (3.2GHz) and is used to connect a receiving amplifier to a receiving antenna. ●It amplifies BS-C-IP signals (1000–3224MHz) while allowing FM, VHF, and UHF signals (10–770MHz) to pass through. ●Current can pass between the output terminal and the BS/CS input terminal. ●Current can also pass between the output terminal and the U/V input terminal with a switch operation. ●When installing on a mast, please use a separately sold HI Kanagu or commercially available stainless steel band. ●It is for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

• others

● FC-ASJ4(J) and FC-ASJ5(J) are CS converter units (local oscillator 11.3GHz) manufactured by Nippon Antenna. ● This product is a set that includes a feed horn and a CS converter (local oscillator 11.3GHz). ● It converts signals in the 12GHz band to the 1GHz band. ● It has low noise. With an excellent noise figure (NF), it can receive clear images with a good S/N ratio. ● It is for joint reception. ● It is a product compatible with J-Alert. *For more details, please feel free to contact us.*

• others