エクセリ List of Products and Services

The EMS-924 is a stand microphone (with windscreen) made by Alinco. It is a microphone for the Alinco DR-PM300SE specific low-power transceiver for mobile and base stations. This is the same product as the standard components of the DR-PM300SE. Please use it as a replacement or spare. The microphone is a directional type, making it less likely to pick up surrounding noise during transmission, and the windscreen helps reduce wind noise during transmission. It is also easier to use outdoors. The microphone arm is a flexible type that can bend easily. It features a PTT lock to maintain the transmission state. There is also a MIC switch that allows you to turn off the microphone while keeping the transmission state. It has a 7-level microphone gain adjustment to increase or decrease the sound. You can make the sound louder, reduce distortion, and decrease feedback. *Microphone gain refers to determining the volume level at which sound picked up by the microphone is input, or the sound pressure level for input. The bottom part has an easily detachable magnetic base. 【Compatible Models】 Specific low-power transceiver for mobile and base stations ・DR-PM300SE

• others

The EMS-61 is a dynamic microphone made by Alinco. * The EMS-61 does not have a speaker function. It can be used with Alinco's vehicle-mounted digital simple radios and more. It is easy to grip and features a channel switch on the microphone unit, allowing for simple up-and-down operation to change channels. It comes with a channel switch lock function. The coiled cable is designed to be tangle-resistant and less prone to breakage, making it safe to use in tough environments such as construction sites and manufacturing plants. While it can be used with most Alinco vehicle-mounted radios starting with the model number DR, please note that sound quality may vary significantly, and microphone gain adjustment may be necessary. In addition to the compatible models listed below, it is also a standard component for DR-620, DR-635, DR-120, DR-420X, DR-M03, and DR-M06. 【Compatible Models】 Digital Simple Radio Registered Station - DR-DPM60 - DR-DPM61 Digital Simple Radio Licensed Station - DR-BU60D Specific Low Power Transceiver - DR-PM300SE

• others

The "DM-305MV" is a linear (transformer-type) stabilized power supply manufactured by Alinco. It can convert and adjust household power from AC100V to DC6V-15V. When using a mobile radio as a base station, it can draw power from a household outlet of AC100V. It is equipped with a heat sink suitable for heat dissipation and absorption, preventing the main unit from becoming excessively hot. Power can be easily supplied by simply plugging in the AC adapter. *Please note that it cannot be used for chemical experiments, devices using compressors or motors, or battery charging. *When connecting this product, please ensure that the power is turned OFF. 【Compatible Models】 Digital Simple Radio Licensed Station - DJ-BU50AD - DR-BU60D Digital Simple Radio Registered Station - DR-DP50M - DR-DPM50 - DR-DPM60 - DR-DPM61 Specific Low Power Transceiver - DR-PM300SE Receiver - DR-XF7 - DR-XF7

• others

The MP16 is a high-volume speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. It uses a flexible coiled cable that is resistant to tangling and breakage. It comes with wind noise reduction functionality, eliminating wind noise for clear audio. With an IP54 dustproof and splash-proof design, it is ideal for use in light rain or dusty environments. Clear audio is produced even when water splashes onto the speaker surface. The speaker has a maximum output of 2W, making it audible even in noisy places. It includes a 3.5mm headphone jack, allowing you to connect commercially available headphones (8Ω/L-shaped plug recommended). 【Compatible Models】 IP Radios - IP501H - IP502H - IP200H Digital Low-Power Community Radio - IC-DRC1 - IC-DRC1MK2

• others

The MP68 is a high-volume speaker microphone manufactured by Smart Wave Telecommunications. It can be used with IP radios and digital simple radios from Smart Wave and Icom. It features a large PTT button that is easy to press even when wearing gloves or work gloves. It uses a stretchable coiled cable that is resistant to tangling and less prone to breakage. With an IP67 dustproof and waterproof structure, it is ideal for use in heavy rain or dusty environments. *The waterproofing is maintained only when the rubber cap is attached to the earphone jack. There is no waterproofing effect when the rubber cap is removed or when an earphone is inserted. The speaker has a maximum output of 2W, making it audible even in noisy environments. It comes with a 3.5mm earphone jack, allowing you to connect commercially available earphones (8Ω/L-shaped plug recommended). 【Compatible Models】 IP Radios - IP501H - IP502H - IP200H Digital Low-Power Community Radio - IC-DRC1 - IC-DRC1MK2

• others

The B199041 is a waterproof case made by ON'S COMPANY. It can store the BbTALKIN and protect the radio from splashes and water droplets. The case has an IPX8 waterproof rating and an IP6X dustproof rating, so you can use the BbTALKIN safely even on rainy days, during work near water, or in dusty environments. The case is equipped with operational buttons for the radio, allowing you to turn the power on/off and switch channels while the device is stored inside. You can connect earphone microphones or headsets while they remain stored in the case. There is no need to use mounting screws; you can easily store the radio by removing the side fasteners and accessing it from the bottom of the case. By combining one of the following mounts on the back of the case, you can attach the BbTALKIN to a helmet: - Clip mount: Clip Mount B199055 - Double-sided tape mount: Helmet Mount B199068 【Compatible Models】 Multi-user simultaneous communication radio system - BbTALKIN CS - BbTALKIN ADVANCE

• others

The SK-T02 is a soft case made by Smart Wave Telecommunications. It is a soft case that can be used with IP radios and digital simple radios from Smart Wave and Icom. It protects the radio body from dirt and impact. The belt clip can be attached to the battery while stored in the case. The radio can be charged while it is stored in the SK-T02. All button operations can be performed even while the case is attached. 【Compatible Models】 IP Radios - IP501H - IP502H 【Features】 - Can store the radio with the belt clip attached to the battery - Can charge while stored - All buttons are operable For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

The "SK-T52" is a soft case made by Smart Wave Telecommunications. It can store the IP Smart Wave IP radio SK-5000 equipped with Smart Wave battery packs SK-P51 and SK-P52, protecting it from shocks and dirt. By removing the snap button on the bottom, you can charge the radio with the single charger SK-P54 while the case is attached. All button operations can be performed even while the case is on. 【Compatible Models】 IP Radio - SK-5000 【Features】 ■ Can store the case with the belt clip attached to the battery ■ Can charge while stored ■ All button operations are possible For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• others

The "WX-M210" is a headset-type microphone (transmission only) manufactured by Panasonic (PANASONIC). It is designed to be used in conjunction with the Panasonic (PANASONIC) 300MHz band PLL tie-pin type wireless microphone WX-1800 (Panaguide), the 800MHz band tie-pin type wireless microphone WX-4300B, and the 800MHz band PLL headset type wireless microphone WX-4360B. *Note: It cannot be used with WX-1600 or WX-4370B as they do not have sensitivity switching. By utilizing the VOX function, hands-free operation is possible. *The VOX function automatically switches to transmission mode when sound is detected and automatically turns off the transmission switch when no sound is detected. The microphone is a unidirectional electret condenser microphone. A relay cable YWX4360LA0A-RV is also included. *It does not support simultaneous calls. *It does not have waterproof performance. 【Compatible Models】 Wireless Guide System - RD-M650AZ - RD-M750-D - WX-4300B

• others

The part number "X004360U01YD" is a headset component manufactured by Panasonic (PANASONIC). It is a headset-type microphone that is part of the standard configuration for the Panasonic (PANASONIC) 800MHz band PLL wireless microphone WX-4360B and the 800MHz band PLL instructor wireless microphone WX-4370B. Please use it in combination with the transmitter part WX-4300B of the WX-4360B and WX-4370B. A separate relay cable is required. - Relay cable (for WX-4300B, WX-4360B): YWX4360LA0A-RV - Relay cable (for WX-4370B): YWX4350LA0-RV *The model number has changed from the old model X004350U01 to X004360U01YD. 【Compatible Models】 Wireless Guide System - WX-4300B - WX-4360B - WX-4370B

• others

In theme park guidance operations, effective communication across a wide area is essential. To deliver accurate information to visitors, clear audio and stable communication in dynamic situations are crucial. In noisy environments or when staff are on the move, traditional systems often struggle with issues like unclear audio and dropped connections. The WX-4370B enables smooth information delivery to visitors with clear audio and stable communication. 【Usage Scenarios】 - Attraction guidance - Explanations at event venues - In-park tour guiding - Emergency evacuation guidance 【Benefits of Implementation】 - Improved quality of information delivery to visitors - Increased operational efficiency for staff - Enhanced customer satisfaction - Quick response in emergencies

• Safety and consumables
• others

In the forestry field, rapid and accurate information transmission between teams is essential. Especially in noisy environments or tasks that involve a lot of movement, clear voice communication greatly affects work efficiency. Uncertain information transmission can lead to delays in work and decreased safety. The WX-4370B enables clear voice transmission and strengthens collaboration in forestry operations. 【Usage Scenarios】 * Coordination between teams during logging operations * Instruction transmission during surveying tasks * Communication between site supervisors and workers 【Benefits of Implementation】 * Improved work efficiency through smooth information sharing * Enhanced safety * Reduction of errors through accurate instruction transmission

• Safety and consumables
• others

In rescue operations at mines, swift and accurate information transmission is essential. In deep underground, noisy environments, normal communication methods make it difficult to hear voices, which can lead to delays or misunderstandings in rescue efforts. The WX-4370B enables clear voice communication and strengthens coordination among rescue team members. The unidirectional microphone reduces surrounding noise, allowing for reliable communication. 【Usage Scenarios】 - Rescue operations within the mine - Information transmission during emergencies - Strengthening coordination among rescue team members 【Benefits of Implementation】 - Accurate information transmission with clear voice - Support for rapid rescue operations - Ensuring the safety of rescue team members

• Safety and consumables
• others

In the field of sports coaching, accurate communication of instructions to athletes is essential for performance improvement. Particularly during outdoor practices and competitions, situations where noise and distance make it difficult for voices to carry can lead to misunderstandings and hinder the transmission of coaching content. The WX-4370B supports coaching with clear audio, enabling precise information delivery to athletes. 【Usage Scenarios】 - Outdoor sports coaching - Simultaneous coaching for multiple individuals - Use in sports involving intense movement 【Benefits of Implementation】 - Performance improvement through accurate instruction delivery - Clear audio even in noisy environments - Enhanced coaching efficiency

• Safety and consumables
• others

The WX-4370B (WX4370B) is a Panasonic-made 800MHz band PLL type pin-shaped wireless microphone. It can be used without the need for personal qualifications or registration. It operates on frequencies from 806MHz to 809MHz (Band B). This is a set product that includes the transmitter WX-4300B, headset microphone X004350U01, relay cable YWX4350LA0-RV, and a waterproof case. It can also be used as a microphone for the 800MHz band PLL wireless powered speakers WS-X66A, WS-X77, and WS-66A. Equipped with a sweat-resistant dedicated case (waterproof case), it is ideal for activities that involve intense movement. The band with hook-and-loop fasteners allows for easy attachment and detachment, securely fixing the main unit to your belt. The microphone is a unidirectional electret condenser microphone, making it less likely to pick up unnecessary noise. The transmitter body is made of antibacterial resin, ensuring cleanliness during use. The battery life is as follows: - One AA manganese dry battery: approximately 10 hours - One AA alkaline dry battery: approximately 25 hours - Nickel-cadmium battery pack WX-4451: approximately 8 hours

• Safety and consumables
• others

In the operation of theme park attractions, accurate information delivery to visitors is a crucial factor that influences customer satisfaction. Particularly in noisy environments or across extensive attractions, there is a challenge where information is difficult to convey using only loudspeakers. The wireless guide system WX-4360B enables clear audio delivery of detailed explanations and safety alerts directly to visitors. With hands-free operation, staff can provide guidance while simultaneously performing other tasks, contributing to improved operational efficiency. 【Usage Scenarios】 - Information on attraction wait times - Explanations within attractions - Emergency evacuation guidance - Backstage tours 【Benefits of Implementation】 - Improved accuracy of information delivery - Enhanced customer satisfaction - Increased staff operational efficiency - Support for inbound visitors through multilingual capabilities

• Safety and consumables
• others

In the warehouse industry, inventory management requires accurate information transmission and prompt responses. Especially in extensive warehouse operations, hands-free communication is essential. Traditional communication methods are prone to delays and misunderstandings, which can reduce work efficiency. Our wireless guide system WX-4360B enables hands-free calls and supports the efficiency of inventory management. 【Usage Scenarios】 - Picking operations - Inspection operations - Inbound and outbound operations - Communication within the warehouse 【Benefits of Implementation】 - Improved work efficiency - Reduced mistakes - Faster information transmission - Enhanced safety

• Safety and consumables
• others

In factory work instructions, accurate and prompt information transmission is required. Particularly in noisy environments or situations where both hands are occupied, traditional communication methods can lead to delays in information transfer, potentially resulting in decreased work efficiency and mistakes. Our wireless guide system WX-4360B enables hands-free communication, facilitating smooth work instructions. 【Usage Scenarios】 - Instruction transmission on the production line - Instructions in quality control - Instructions related to safety management 【Benefits of Implementation】 - Improved work efficiency - Reduction of mistakes - Enhanced safety

• Safety and consumables
• others

In the museum's explanation, the quality of information transmission to visitors is important. To maximize the appeal of the exhibits, an environment that allows for clear audio and the use of both hands for explanations is required. Even in noisy environments, the WX-4360B, with its unidirectional microphone, provides clear audio and allows for hands-free explanations, making it the ideal choice. 【Usage Scenarios】 * Explanations in exhibition halls * Guided tours * Group presentations 【Benefits of Implementation】 * Promotes understanding of exhibits with clear audio * Reduces the burden on the presenter with hands-free operation * Increases visitor satisfaction

• Safety and consumables
• others

In the field of sports coaching, accurate instructions and information transmission are essential. Clear communication during practice and tactical instructions during matches, conveyed with a clear voice, contribute to improving the team's performance. Even amidst surrounding noise, the coach's voice reaching the players and delivering precise instructions is a crucial element for victory. Our wireless guide system facilitates communication between coaches and players, enhancing team coordination. 【Usage Scenarios】 - Individual coaching during practice - Tactical instructions during matches - Information sharing in team meetings - Remote coaching 【Benefits of Implementation】 - The coach's voice is delivered clearly, preventing misunderstandings - Hands-free operation allows for coaching while moving - Overall understanding and coordination within the team improve - Coaching efficiency increases, making effective use of practice time

• Safety and consumables
• others

The "WX-4360B" is a Panasonic-made 800MHz band PLL headset-type wireless microphone. No personal qualifications or registration are required for use. It can be used as a transmitter for an 800MHz band wireless microphone system. It is suitable for situations where hands-free communication is needed, such as events, simultaneous interpretation, seminars, exhibitions, and for instructors in yoga or gyms. This product comes as a set with the transmitter WX-4300B and the headset-type microphone X004350U01. It can also be used as a microphone for the 800MHz band PLL wireless powered speakers WS-X66A, WS-X77, and WS-66A. The microphone is a unidirectional electret condenser microphone, making it difficult to pick up unnecessary noise. It features a hook-and-loop fastener band that allows for easy attachment and detachment, securely fastening the main unit to a belt. The transmitter body is made of antibacterial resin, ensuring cleanliness during use. Battery life: - One AA manganese dry battery: approximately 10 hours - One AA alkaline battery: approximately 25 hours - Nickel/cadmium battery pack WX-4451: approximately 8 hours

• Safety and consumables
• others

The CMF2000B (CMF-2000B) is a high-performance common mode filter manufactured by Diamond. It effectively reduces common mode noise (high-frequency interference) that can be problematic in amateur radio and HF band communications. It supports frequencies from 1MHz to 54MHz (HF to 50MHz band) and features a high-power design with an input capacity of 2kW (PEP), making it safe to use in environments with linear amplifiers. It contributes to noise reduction during high-output operations, preventing interference with shack peripherals and stabilizing transmission quality. This product is used by connecting it between the radio and the antenna. ■ Connection Examples When using a linear amplifier: Radio ⇆ Linear Amplifier ⇆ CMF2000B ⇆ Antenna When using an external antenna tuner: Radio ⇆ CMF2000B ⇆ External Antenna Tuner ⇆ Antenna The impedance is 50Ω, and the connector is M-J type. It is designed for easy integration into existing radio equipment. *For more details, please feel free to contact us.

• others

The CMF250 (CMF-250) is a high-performance common mode filter manufactured by Daiichi Denpa Kogyo (DIAMOND). It is a compact and small filter, measuring less than 20 cm, that effectively reduces unwanted radiation in the HF band, making it effective against radio interference. It suppresses radio interference (interference) such as TVI and BCI caused by common mode radiation. It has an attenuation of over 30 dB even in low band frequency ranges, making it effective for suppressing radio interference. It has low loss and can be used with radios of up to 200W. It is also effective in preventing malfunctions and electric shocks due to stray currents. It is connected between the radio and the antenna. *For more details, please feel free to contact us.

• others

The EMS-87BNC is a wireless speaker microphone with built-in noise cancellation features made by Alinco. It can be used in combination with Alinco's Bluetooth-compatible digital simple radio and specific low-power transceivers. Thanks to Bluetooth, operating without cables from the radio enhances convenience and improves safety by eliminating the risk of snagging cables. It is equipped with a high-performance noise cancellation function, providing clear sound quality. With an IP67 dust and waterproof rating, it can be safely used even in rainy conditions or during work in dusty environments. When fully charged, it can be used for approximately 12 hours. It comes with a rotating clip that can be attached to a chest pocket. The built-in battery capacity is 3.7V/980mA. 【Compatible Models】 Digital Simple Radio Registered Stations - DJ-DPS71 - DJ-DPX2 - DR-DPM61 Specific Low-Power Transceiver - DR-PM300SE For extremely low-priced earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EDC-295" is a charging stand made by Alinco. It is the same product as the single charger set EDC-295A and the connected charging set EDC-295R. It is also the same product as the Bluetooth wireless earphone microphone EME-80WMA and EME-80BMA accessories. When combined with the separately sold AC adapter EDC-300 or the charging cables EDS-37 or UX1647, it becomes a charger for AC100V. The charging terminal is microUSB. 【Compatible Models】 Digital Simple Radio Registered Station - DJ-DPX2 Specific Low Power Transceiver - DJ-PX10 【Features】 ■ Lightweight and compact size for portability ■ Can be powered from AC100V ■ Equipped with a microUSB charging terminal For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli.

• others

The "EDC-295A" is a charging stand manufactured by Alinco. It is a set product that includes the charging stand EDC-295, the charging AC adapter EDC-300, and the charging cable EDS-37. It can fully charge Alinco wireless earphone microphones EME-80BMA/EME-80WMA or the specific low-power transceiver DJ-PX10 in about 2 hours. You can charge it by connecting the charging USB cable UX1647 to the charging stand EDC-295 from a USB port, or by combining the charging AC adapter EDC-300 with the charging stand EDC-295 to charge from a household power supply of AC100V. Additionally, you can connect up to three units of the separately sold linking charging set EDC-295R to charge Bluetooth-compatible wireless earphone microphones EME-80BMA, EME-80WMA, or the specific low-power transceiver DJ-PX10 simultaneously for up to four devices. The charging terminal is microUSB. 【Compatible Models】 Digital Simple Radio Registration Station - DJ-DPX2 Specific Low-Power Transceiver - DJ-PX10 For unbeatable prices on earphone microphones and batteries, trust Excely.

• others

The "EDC-308R" is a four-unit charging stand manufactured by Alinco. When combined with the separately sold AC adapter EDC-300 and charging cable UA0105, it charges Alinco's Bluetooth-compatible wireless speaker microphones EMS-87B, EMS-87W, and the wireless speaker microphone EMS-87BNC with built-in noise cancellation. By connecting the back of the charging stand with the included linking cable UX1599, you can link up to four EDC-308R units together for simultaneous charging of four devices. It can be powered from a household AC 100V outlet. Its slim and compact design allows for installation without taking up much space. *Please note that the wireless speaker microphone EMS-87B is not included. *Please note that the EDC-308R cannot be used alone; it must be combined with the separately sold AC adapter EDC-300 and charging cable UA0105. [Compatible Models] Digital Simple Radio Registered Station - DJ-DPX2 Megaphone - DLS-01 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli.

• others

The EME-844 is a headset manufactured by ALINCO. It can be used in combination with the ALINCO hands-free megaphone DLS-01. Weighing only 36g, it is ultra-lightweight, allowing for stress-free use even over long periods. It is designed to be worn around the back of the neck, so it does not interfere with helmet use. It features a unidirectional electret microphone that picks up sound from a specific direction, making it suitable for use in noisy environments. The boom microphone can be adjusted to the user's preferred angle. A clip is included along the megaphone connection cable, allowing you to secure the cable without it becoming loose. The megaphone connection connector is a 1-pin screw type, making it difficult to detach during active use, such as when giving guidance. 【Compatible Models】 Megaphone - DLS-01 【Features】 ■ Unidirectional electret microphone ■ Ultra-lightweight at 36g ■ Fine angle adjustment for the microphone ■ Windshield cap included on the microphone ■ 1-pin screw type For extremely low prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.

• others

The "EDC-300" is a charging AC adapter manufactured by Alinco. You can charge the following radios and accessories using the methods below: 【DJ-PHM10】 - By combining with the separately sold DC cable UA0105, you can connect the cable directly to the radio body and charge for about 3 hours. - By connecting the cable to the separately sold single/dual charging stand EDC-299R, you can charge for about 3 hours. 【DJ-PV1D】 - By combining with the separately sold USB charging cable EDS-32 and connecting it to the radio body, you can charge in about 4.5 hours. - When combined with the separately sold dual charging stand EDC-307, it can be charged in about 5.5 hours. 【EMS-87B, EMS-87W, EMS-87BNC, DLS-01】 - By combining with the separately sold DC cable UA0105 and connecting it to the dual charging stand EDC-308R, it can be charged in about 3 hours. 【EME-80WMA, EME-80BMA】 - By combining with the separately sold dual charging set EDC-295R and the charging cable EDS-37 included with EME-80WMA and EME-80BMA, it can be charged in about 2 hours. It can be powered from a household AC 100V power supply.

• others

The EDC-307 is a dual charging stand manufactured by Alinco. It can charge the Alinco digital low-power community radio DJ-PV1D (with Li-Ion battery pack EBP-180). Please charge it using the AC adapter EDC-300 and USB charging cable EDS-32 included with the standard configuration of the DJ-PV1D, connecting to a household power supply of AC100V. The estimated charging time from an empty state is approximately 5.5 hours. It can charge two units simultaneously. Although it is not a daisy-chaining charger, you can connect multiple EDC-307 charging stands for use (just by linking the charging stands). The connection method is as follows: 1. Connect the charging stands at two hooks on the side. 2. Insert the charging cables included with the radios into the back of each charging stand, then connect the AC adapter to an AC100V outlet. 3. For each charging stand, connect the charging AC adapter EDC-300 and USB charging cable EDS-32, and plug them into an AC100V outlet. 【Compatible Models】 Digital low-power community radio - DJ-PV1D

• others

The "EBP-180" is a Li-Ion battery pack manufactured by Alinco. It can be used in combination with the Alinco digital low-power community radio DJ-PV1D. This is a type of battery that is built into the main unit. The battery capacity is 3.8V/1960mAh, and when fully charged, the battery lasts for approximately 14 hours. The charging time (using EDC-300/EDS-32) is about 4.5 hours. It is a standard component of the Alinco digital low-power community radio DJ-PV1D. It can be purchased as a spare or replacement. 【Compatible Models】 Digital Low-Power Community Radio - DJ-PV1D 【Features】 ■ Operable for up to approximately 14 hours ■ Battery capacity 3.8V/1960mAh ■ Charging time approximately 4.5 hours

• others

The "EME-53A" is a 2-pin plug type helmet headset manufactured by Alinco. It can be used with specific low-power transceivers made by Alinco. It also supports simultaneous communication (only with Alinco transceivers that have PTT lock functionality). With ear-covering speaker pads, it can be used in noisy environments. It features a high-quality dynamic microphone that is less likely to pick up surrounding ambient sounds. Being designed for professional use, it is more durable than general-purpose models and can be repaired. It can be used on either the left or right ear side. *Adjustment of the pad position is necessary. 【Compatible Models】 Specific low-power transceivers: - DJ-CH202/DJ-CH272/DJ-CH3 - DJ-M10/DJ-P300/DJ-R200D - DJ-P221/DJ-P222/DJ-P240 - DJ-P921 - DJ-PB20/DJ-PB27 - DJ-PX31/DJ-TX31 - DJ-U1 Digital simple radio registered stations: - DJ-DP10 - DJ-DP50H/DJ-DP50HB - DJ-DPS70/DJ-DPS71 - DJ-DPX1/DJ-DPX2

• others

In the medical field, rapid and accurate information transmission is essential. Particularly in patient care and collaboration among medical staff, real-time communication is indispensable. Traditional means of communication can lead to delays in information transmission and the possibility of missed messages. The DJ-P921, with its lightweight and compact design, allows medical staff to carry it easily at all times, enabling swift information sharing. 【Usage Scenarios】 - Communication among nurses within the ward - Coordination between emergency responders and medical institutions - Information sharing among teams in the operating room - Information transmission during patient transport - Communication with maintenance staff for medical equipment 【Benefits of Implementation】 - Improved operational efficiency through rapid information transmission - Quick response to patients - Reduction of medical errors - Enhanced teamwork - Cost savings

• others

In the warehouse industry, quick and accurate communication of instructions is essential. Real-time communication is crucial in various situations such as inventory management, picking, and inspection. Traditional means of communication can lead to delays and misunderstandings in information transfer, which may result in decreased work efficiency and errors. The DJ-P921 is lightweight, compact, and highly portable, allowing for smooth communication of instructions within the warehouse. 【Usage Scenarios】 - Instructions during picking operations - Coordination with inventory management personnel - Communication during inbound and outbound processes - Emergency communication 【Benefits of Implementation】 - Faster communication of instructions - Improved work efficiency - Reduction of errors - Decreased communication costs

• others

Communication within the factory is a crucial factor that affects work efficiency and safety. Especially in large factories or noisy environments, reliable communication is essential. Traditional means of communication often lead to missed messages or misunderstandings, which can cause delays and mistakes in work. The DJ-P921, with its lightweight and compact design, is easy to carry around the factory. It enables quick and accurate communication with clear audio, contributing to improved work efficiency. 【Usage Scenarios】 - Communication of instructions on the production line - Inventory management within the warehouse - Coordination with the quality control department - Emergency communication 【Benefits of Implementation】 - Improved work efficiency through faster communication of instructions - Reduction of communication errors - Quick response in emergencies - Cost savings

• others

In the cleaning industry, it is essential to communicate cleaning conditions and emergency contacts quickly. Particularly when working in large areas or with multiple people, accurate information transmission greatly affects operational efficiency. Delays in communication can lead to slow responses and potential complaints from customers. The DJ-P921 is lightweight, compact, and highly portable, enabling smooth reporting during cleaning operations. 【Usage Scenarios】 - Work instructions at cleaning sites - Reporting cleaning conditions - Emergency communication - Information sharing among multiple people 【Benefits of Implementation】 - Improved operational efficiency through rapid information transmission - Increased customer satisfaction through accurate information sharing - Quick response in emergencies - Cost reduction

• others

In a beauty salon, smooth service delivery without keeping customers waiting is essential. It is particularly important to quickly communicate with staff during treatments and to call customers promptly. Traditional calling methods have faced challenges such as difficulty in being heard and time-consuming movement. The DJ-P921, with its lightweight and compact design, facilitates smooth communication among staff and enables quick customer calls, contributing to improved customer satisfaction. 【Usage Scenarios】 - Communication with staff during treatments - Calling customers - Communication between reception and treatment areas 【Benefits of Implementation】 - Strengthened collaboration among staff - Reduced waiting time for customers - Increased customer satisfaction

• others

The "DJ-P921" is a specific low-power transceiver manufactured by Alinco. It is a specific low-power transceiver that allows you to choose between a long antenna (L) for communication distance and a short antenna (S) for portability. It supports group settings to reduce interference and noise, with a maximum of 50 groups that can be configured. Its palm-sized compactness allows you to carry it in your chest pocket. Battery life: - Two AA alkaline batteries: approximately 41 hours - Nickel-hydride battery pack EBP-57N (sold separately): approximately 33 hours *Estimated time based on a usage ratio of transmit 5: receive 5: standby 90. It also comes with a variety of features: - VOX function for hands-free communication - Reception-only mode that can be used as a sub-unit for a guide system - Earphone disconnection detection function that alerts with sound - Emergency call function - Callback function that allows you to hear your own voice in the earphone while transmitting - Low battery warning function that alerts you with sound when the battery is running low A wide range of dedicated accessories is also available. You can also try a demo unit for free in advance, so please feel free to ask.

• others

The "EDC-121A" is a standard charger manufactured by Alinco. It can charge specific low-power transceivers made by Alinco. A dedicated AC adapter, EDC-122, is also included as a standard set. The approximate charging time is about 12 hours. *When using the nickel-hydride battery pack EBP-57N. 【Compatible Models】 Specific low-power transceiver - DJ-P921 【Features】 ■ Comes with a dedicated AC adapter ■ Can be powered from AC100V ■ Charging time is approximately 12 hours For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EDC-121R" is a single connection stand made by Alinco. It can charge specific low-power transceivers made by Alinco. When combined with the separately sold AC adapter EDC-122, up to 5 EDC-121R units can be connected. A connection cable is also included. You can charge the nickel-metal hydride battery pack EBP-57N (manufacturer's suggested retail price 1,200 yen excluding tax) while it is attached to the transceiver body. The charging time for the nickel-metal hydride battery pack EBP-57N is 12 hours. 【Compatible Models】 Specific low-power transceiver - DJ-P921 【Features】 ■ Can connect up to 5 units ■ Can be powered from AC100V ■ Charging time is approximately 12 hours ■ Connection cable included For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• others

The "EME-29AM" is a professional-grade microphone manufactured by Alinco. It is a product that excludes the earphone from the earphone microphone EME-29A (includes microphone, cable, and connector). It features a PTT button lock function, allowing continuous transmission when the transmitter is in 1mW mode. The earphone jack size is 2.5mm. A rotating clip is included on the back of the microphone, allowing for adjustable mounting angles. It comes with a windscreen sponge to reduce wind noise. 【Compatible Models】 Specific low-power transceivers: - DJ-CH202 - DJ-CH272 - DJ-PX31 - DJ-TX31 - DJ-P921 - DJ-PB20 - DJ-PB27 Intercom and complex relay specific low-power wireless communication system: - DJ-U1 【Features】 ■ High durability ■ PTT button lock function ■ Clip for attachment to the chest ■ Earphone jack size is 2.5mm ■ Comes with a windscreen sponge to reduce wind noise For extremely low prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.

• others

The "EBP-57N" is a nickel-metal hydride battery pack manufactured by Alinco. It is designed for specific low-power transceivers made by Alinco. The nickel-metal hydride battery has a capacity of 1.2V/1800mAh, and when fully charged, it can last for approximately 50 hours. *The battery life is based on a communication ratio of 5:5:90 for transmission, reception, and standby, respectively. Usage time may vary depending on the model of the radio and the output of the radio waves. The charging time (using EDC-300/EDS-32) is approximately 4.5 hours. It can be charged in about 12 hours using the single connection stand EDC-121R. It has a compact size, the same as AA alkaline batteries. 【Compatible Models】 Specific low-power transceivers - DJ-P921 Receivers - DJ-X8 【Features】 ■ Operable for up to approximately 50 hours ■ Battery capacity of 1.2V/1800mAh ■ Charging time of about 4.5 hours ■ Compact size similar to AA alkaline batteries

• others

In the railway industry, collaboration among crew members and rapid information transmission between station staff and operations managers are essential for safe operations. Particularly in responding to emergencies and dealing with schedule disruptions, accurate information sharing is required. Traditional radios can face challenges such as ensuring clear audio and limitations in communication range. The DR-BU61D addresses these issues and supports the safe operation of railways. 【Usage Scenarios】 - Communication among crew members on trains - Information sharing between station staff and operations managers - Coordination among maintenance workers - Quick response in emergencies 【Benefits of Implementation】 - Accurate information transmission with clear audio - Reliable collaboration over a wide communication area - Bluetooth compatibility for hands-free operation - IP67 dust and water resistance for use in harsh environments

• others

In the security industry, rapid and reliable information transmission is essential. Especially during extensive patrols and emergency communications, clear audio and stable communication are required. Traditional radios have faced challenges in ensuring clear audio and call distance. The DR-BU61D, with its Bluetooth compatibility, allows for wireless microphone communication, enabling clear audio contact without compromising mobility. 【Usage Scenarios】 * Facility security * Event security * Patrol duties * Emergency communication 【Benefits of Implementation】 * Improved operational efficiency with hands-free capability * Accurate information transmission with clear audio * Stable communication over wide areas * Rapid response in emergencies

• others

In firefighting and rescue operations, rapid information transmission and reliable coordination are essential. In rescue activities, clear voice communication is required even in noisy environments. The DR-BU61D is equipped with Bluetooth functionality, allowing for smooth information sharing even when both hands are occupied through its integration with a wireless microphone. Additionally, with a high output of 5W, it ensures communication over a wide area, supporting rescue operations. [Usage Scenarios] * Coordination among team members at rescue sites * Information sharing within fire stations * Extensive communication during disasters [Benefits of Implementation] * Reliable information transmission through clear voice communication * Improved mobility through hands-free operation * Strengthened coordination by ensuring a wide communication area

• others