エクセリ List of Products and Services

The D-060S (D060S) is a 60MHz band special distribution ratio power divider manufactured by Nippon Antenna. It distributes high-frequency signals from devices such as radios to each terminal according to a specified distribution ratio. However, if isolation is not achieved with the transmission and reception divider, please use it only for antenna coupling. The supported frequency is a specified frequency within the range of 50 to 70MHz. Please specify the center frequency fo (in MHz) when placing your order. The model number for pole mounting is D-060S, and for wall mounting, it is D-060SR. It is waterproof, allowing for outdoor installation. *For more details, please feel free to contact us.

• others

The D-400S (D400S) is a 400MHz band special distribution ratio power divider manufactured by Nippon Antenna. It distributes high-frequency signals from devices such as radios to each terminal according to a specified distribution ratio. However, if the isolation is not achieved with the transmitter/receiver divider, please use it only for antenna coupling. The supported frequency is a specified frequency within the range of 350 to 470MHz. Please specify fo (center frequency) MHz when placing your order. The model number for pole mounting is D-400S, and for wall mounting, it is D-400SR. *For more details, please feel free to contact us.

• others

●EA-226 (EA226) is a magnet mount antenna made by Alinco. ●It is a mobile (vehicle-mounted) magnet mount antenna for 351MHz digital simple radio registered stations. ●It comes with a connector MP attached to a 5m 3D2V coaxial cable, allowing it to connect to radios with a connector MJ. When using with a handheld device, the optional MJ-SMA conversion cable 1D05SR is required. ●It has a lightweight and compact size of approximately 22cm in length. ●The base is magnet-based, allowing it to be mounted on car roofs and similar surfaces. ●It complies with RoHS directives. *For more details, please feel free to contact us.*

• others

●VD-554 (VD554) is a 4-way splitter for receiving signals, manufactured by Nippon Antenna, with a frequency range of 40 to 270 MHz. ●It is a 4-way splitter for radio equipment. ●Operating frequency is 40 to 270 MHz. ●The model number changes based on the type of connector. - NJ connector: VD-554 N-J - MJ connector: VD-554 M type *The BNC-J connector type has been discontinued. *For more details, please feel free to contact us.

• others

● UD-554 (UD554) is a receiving 4-way splitter manufactured by Nippon Antenna, operating in the frequency range of 350 to 470 MHz. ● It is a receiving 4-way splitter for radio equipment. ● The operating frequency is 350 to 470 MHz. ● The model number changes depending on the type of connector. - NJ connector: UD-554 N-J * The BNC-J connector type UD-554 BNC is no longer in production. * For more details, please feel free to contact our company.

• others

● HKD4PSD (HKD-4-PSD) is a movable body 4-way splitter (power supply type for all output terminals) manufactured by Nippon Antenna. ● It is a splitter for the TV terminal WTUE7 with a built-in time information transmitter. ● By connecting the dedicated AC adapter HKDAD, power can be supplied to all output terminals. ● Each output terminal can output a maximum of DC15V/0.8A. *For more details, please feel free to contact our company.*

• others

● ESC-66 (ESC66) is a soft case made by Alinco. ● It is a protective case that can be used with specific low-power transceivers from Alinco, such as DJ-P422B-TM / DJ-P422B-TL and DJ-P421LA / DJ-P421MA in the DJ-P421 series. ● It protects the main body of the radio from impacts from drops, scratches, dirt, and water. ● You can use the ESC-66 while the belt clip is attached to the main body of the radio. ● If you want to use a strap while the ESC-66 is attached, please use the strap hole on the belt clip (the strap hole on the main body of the radio will be covered when the ESC-66 is attached). *For more details, please feel free to contact us.

• others

The HKD6PSD (HKD-6-PSD) is a movable 6-way splitter manufactured by Nippon Antenna, designed for all output terminals to transmit power. It distributes the time information transmitter built into the television terminal WTUE7 into six outputs. By connecting the dedicated AC adapter HKDAD, it is possible to supply AC 100V power to all output terminals. Each output terminal provides a maximum output of DC 15V/0.8A. *For more details, please feel free to contact us.

• others

● The HKDAD is an AC adapter made by Nippon Antenna. ● It is a dedicated AC adapter for the TOT repeater TOTLFR used with radio-controlled clocks and the 4-way splitter HKD4PSD and 6-way splitter HKD6PSD for the television terminal WTUE7, which has a built-in time information transmitter. ● It is powered by a household power supply of AC 100V. ● The maximum output is DC 15V/0.8A. *For more details, please feel free to contact our company.*

• others

The IP-36N-ST101C(W)-A (IP36NST101C(W)A) is a SIP phone (console) manufactured by Nakayo Co., Ltd. (NAKAYO). In addition to standard telephone functions, it can be used as a transmitter and receiver for the Clear Talk Cam made by TB-eye. The Clear Talk Cam is a digital wireless intercom that uses 2.4GHz/5GHz wireless LAN, allowing for up to 120 simultaneous calls with high sound quality. It features expandability with nurse call systems and others. Like the transceiver subunit, it can also perform group calls, and by using the separately sold function expansion dongle TBE-USB-CPLUS2, it is possible to make simultaneous calls across groups and individual calls with transceivers. Power can be supplied via PoE.

• others

● The MV-P370 (MVP370) is a unidirectional microphone manufactured by JVC Kenwood. ● It is an ideal tabletop stand microphone for indoor announcements and business broadcasts. ● Being a unidirectional microphone, it is effective in reducing surrounding noise and feedback. * A directional microphone is one that picks up sound from a specific direction only. ● It is equipped with a talk button that locks when turned to the right while pressed. In the locked state, hands-free broadcasting is possible. ● There is a semi-fixed volume control on the bottom for adjusting chime volume and microphone volume. ● It is powered by a household AC power supply of AC100V using the included AC adapter. ● The connector is a φ6.3 single-ended phono plug. * For more details, please feel free to contact us.

• others

The MV-P370M (MVP370M) is a unidirectional microphone made by JVC Kenwood. It comes with an ascending/descending 4-tone chime. It is a tabletop stand-type microphone. Being a unidirectional microphone, it is effective at reducing surrounding noise and feedback. (Note: A directional microphone picks up sound only from a specific direction.) It features a talk button that locks when turned to the right while pressed. There is a semi-fixed volume control for chime volume and microphone volume located on the bottom. It is suitable for hands-free broadcasting, making it ideal for in-house announcements, business broadcasts, paging, guidance, and conference use. It is powered by a household AC power supply of AC100V using the included AC adapter. The connector is a φ6.3 mono phone plug. *For more details, please feel free to contact us.*

• others

The DP-0602B 55-66 City (DP0602B 55-66 City) is a dipole antenna for outdoor reception stations in the 60MHz band, manufactured by Nippon Antenna. * A dipole antenna is an antenna that is half the wavelength (1/2λ) in length. It is designed to transmit and receive radio waves in all horizontal directions when installed vertically. * This is an outdoor dipole-type antenna for municipal disaster prevention administrative radio communications at 60MHz. * It can be used as a vertically polarized omnidirectional fixed station. * It is for a specified frequency within the range of 54-75MHz. Please specify the center frequency (fo) in MHz when placing your order. * The connector is NJ. * The compatible antenna mounting brackets are C-30 and C-19(D). * For more details, please feel free to contact us.

• others

The BSA-83KIT (BSA83KIT) is a portable and easy-to-install simple antenna pole kit provided by Nippon Antenna. It has a total length of approximately 5.5 meters, making it suitable for various field operations such as temporary antenna setups and the construction of temporary base stations outdoors. Due to its lightweight and user-friendly design, it is ideal for situations that require quick installation, such as event venues, construction sites, and temporary communication facilities during disasters. *For more details, please feel free to contact us.*

• others

● AP-10 (AP10) is a 9m antenna pole manufactured by Nippon Antenna. ● It is an antenna pole for mounting antennas such as radios. ● The length when extended is 9m. ● Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. ● When constructing the AP antenna pole, if the installation of the base holder BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire on the base pipe to secure it, allowing for safe extension work of the pole. *For more details, please feel free to contact us.

• others

The AP-12 (AP12) is an antenna pole (10.9m) manufactured by Nippon Antenna. It is an antenna pole for mounting antennas such as radio equipment. The length when extended is 11m, and it is a 6-section pole. Please use it in combination with the separately sold four-legged base holder (horse) BS-7 and wire rope (120M) SUS. *For more details, please feel free to contact our company.

• others

The AP-14 (AP14) is an antenna pole (12.8m) manufactured by Nippon Antenna. It is an antenna pole for mounting antennas such as radios. The length when extended is approximately 13m, and it is a 7-section pole. Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact our company.

• others

●AP-8 (AP8) is an antenna pole (7m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas such as radios. ●The length when extended is 7m, and it is a 4-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact our company.

• others

●CH10 (CH10) is a magnet holder from the MUSEN mall brand. ●It is a holder that securely fixes radios and smartphones. By attaching the included metal plate to devices like radios, you can easily mount various equipment. ●It features a 360° rotating ball joint, allowing you to freely adjust to your preferred angle. It can be comfortably used in a variety of settings, including inside a car, at a desk, or in a workspace. ●With a powerful magnet that securely holds the device, it can be used stably even in environments with vibrations or during driving. ●It can be attached and detached with one touch, making it smooth to remove radios or smartphones. It can be easily installed without the need for tools. ●For iPhone 12 and later models that support MagSafe, it can be attached directly with the magnet. Even for models that do not support MagSafe, it can be used by attaching the included metal plate. ●It is useful for a wide range of applications, including using navigation apps on smartphones, operating business applications, and installing radios. *For more details, please feel free to contact us.

• others

●BS-78 (BS78) is a four-legged base holder manufactured by Nippon Antenna. ●It can be combined with separately sold antenna poles AP-8 (7m), AP-10 (9m), AP-12 (10.9m), and AP-14 (12.8m). ●It is used in combination with the antenna pole and stay wire rope when installing antennas such as radios. ●When constructing with the AP antenna pole, if the installation of the BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire to secure it to the base pipe, allowing for safe pole extension work. *For more details, please feel free to contact our company.

• others

The WB-2000-2 (WB20002) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA-sized nickel-metal hydride batteries (capacity 2000mAh) for wireless microphones. It uses a low self-discharge type nickel-metal hydride battery to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.

• others

The WB-1000A-2 (WB1000A2) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA-sized nickel-metal hydride batteries (capacity 1000mAh) designed for wireless microphones. It uses low self-discharge type nickel-metal hydride batteries to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact our company.*

• others

The WM-1120 (WM1120) is a wireless guide handheld microphone transmitter manufactured by TOA Corporation. It uses the 322 MHz band for C-band (Type C) wireless microphones in the specific low-power radio frequency range. It features a PLL synthesizer system. The microphone sensitivity can be switched between two levels. It has two channels for tone squelch switching. The battery life is as follows: - When using separately sold AA alkaline batteries: approximately 20 hours - When using separately sold AA nickel-metal hydride batteries WB-2000: approximately 18 hours - When using separately sold AA nickel-metal hydride batteries WB-1000: approximately 10 hours To charge the AA nickel-metal hydride batteries WB-2000 / WB-1000A, a separately sold wireless guide charger (for 12 units) BC-1100A-12 is required. *For more details, please feel free to contact us.

• others

The BC-1100A-12 (BC1100A12) is a wireless guide charger manufactured by TOA Corporation. It is a rapid charger for the TOA wireless guide portable transmitters WM-1100, WM-1120, and the wireless guide portable receivers WT-1100, WT-1101, as well as the communication wireless system portable device WF-101. It can rapidly charge up to 12 units simultaneously. The charging times are as follows: - When using the dedicated rechargeable AA nickel-metal hydride battery (2000mAh) WB-2000: approximately 2 hours - When using the dedicated rechargeable AA nickel-metal hydride battery (1000mAh) WB-1000: approximately 1 hour. The power supply can be charged using the included AC adapter from a household power source of AC100V. *For more details, please feel free to contact us.

• others

The DC24N-10 (DC24N10) is a DC-DC converter (10A) manufactured by Nippon Antenna. It is specifically developed for MCA radios, with an input voltage of DC24V (22V to 30V), an output voltage of 12V (DC13.8V ±10%), and an output current of 10A (maximum 11A for 3 minutes). It allows the use of a DC12V radio with a DC24V power supply. *For more details, please feel free to contact our company.*

• others

The HGB-450-3A-09 (HGB4503A09) is a high-gain gutter antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band. The supported frequency range is 350 to 470MHz, and please specify the frequency when purchasing. - Frequency 350-470MHz band: HGB-450-3A-09 f:350-370 (set) - Frequency 365-387MHz band: HGB-450-3A-09 f:365-387 (set) - Frequency 370-390MHz band: HGB-450-3A-09 f:370-390 (set) - Frequency 410-430MHz band: HGB-450-3A-09 f:410-430 (set) - Frequency 430-450MHz band: HGB-450-3A-09 f:430-450 (set) - Frequency 450-470MHz band: HGB-450-3A-09 f:450-470 (set) For more details, please feel free to contact us.

• others

The HGB-450-5-09EL (HGB450509EL) is a 400MHz band high-gain gutter element manufactured by Nippon Antenna. It is a capacitive grounded 3λ/4 whip antenna element. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. λ (lambda) refers to wavelength. It can be used as an antenna for general business radio and digital simple radio. It comes with a folding mechanism. It should be used in combination with the separately sold mounting bases GB-BA3-09 and GB-BA5-09, along with connectors. Please combine it with one of the separately sold connectors MP-TA2 (M connector), NP-TA (N connector), or BNCP-TA (BNC connector) that matches your radio equipment. Please specify a single frequency within the range of 350MHz to 470MHz when placing your order. For more details, please feel free to contact us.

• others

The WH-450-1ND-09 (WH4501ND09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for UHF radios. The supported frequency range is 383.35 to 383.45MHz (receiving 399.0625 to 399.45MHz, transmitting 383.0625 to 383.45MHz). It is a whip antenna that requires hole-mount installation. Note that a whip antenna is one that has no directivity and can receive and transmit signals from any angle. This product has a mounting hole of φ16mm. It comes with an N-J connector, and the coaxial cable is sold separately. It includes a ground wire and is designed to have excellent electrical performance regardless of installation location, with minimal adverse effects from the vehicle body. It complies with safety standards. For more details, please feel free to contact our company.

• others

In the food industry, rapid and accurate information transmission is essential to minimize the risk of foreign object contamination. Particularly in manufacturing lines and warehouses, communication methods that can convey instructions clearly even in noisy environments are required. The HP788, with its AI noise-canceling feature, reduces background noise and ensures clear audio. It also has explosion-proof capabilities, ensuring safe communication in the event of an accident. 【Usage Scenarios】 - Emergency communication on food manufacturing lines - Instruction transmission during inspection work in warehouses - Rapid information sharing in the event of foreign object contamination 【Benefits of Implementation】 - Enables accurate instruction transmission with clear audio even in noisy environments - Accelerates response to foreign object contamination incidents - Ensures safe communication in a secure environment due to explosion-proof capabilities

• others

In the pharmaceutical industry's quality control, accurate information transmission on the manufacturing floor is essential. Particularly in explosion-proof areas, reliable communication is required while ensuring safety. If the sound from the radio is difficult to hear, there is a risk of misunderstandings or accidents regarding instructions. The HP788, with its AI noise-canceling feature, reduces background noise and enables clear audio. This enhances the accuracy of instruction transmission in quality control and supports a safe working environment. 【Usage Scenarios】 - Quality inspections on the manufacturing floor - Work instructions in explosion-proof areas - Emergency communications 【Benefits of Implementation】 - Improved accuracy of instruction transmission with clear audio - Easier to hear even in noisy environments due to AI noise cancellation - Compliance with explosion-proof standards to establish a safe working environment

• others

In the chemical plant industry, ensuring safety during work in explosive atmospheres is the top priority. To prevent accidents before they occur, accurate and rapid information transmission is essential, and radios with explosion-proof performance are required. The HP788 complies with UL/CSA explosion-proof standards, making it suitable for use in hazardous areas. Additionally, its AI noise-canceling feature enables clear voice communication even in noisy environments, supporting accurate instruction delivery during emergencies. 【Usage Scenarios】 * Communication during work within the chemical plant * Establishing a communication system for emergencies * Work instructions in hazardous areas 【Benefits of Implementation】 * Improved safety due to explosion-proof performance * Reliable information transmission through clear voice communication * Reduced accident risk through rapid information transmission

• others

In the gas industry, rapid and accurate information transmission is essential for emergency response. Particularly in emergencies such as gas leaks or accidents, reliable communication methods are required. When considering use in explosion-proof areas, the selection of radios is very important, and it is essential that they meet safety standards. The HP788 complies with UL/CSA explosion-proof standards, enabling safe communication even in hazardous environments. 【Usage Scenarios】 - On-site response during gas leak detection - Establishing communication networks in emergencies - Work instructions within the plant 【Benefits of Implementation】 - Achieves safe on-site communication through explosion-proof performance - Clear voice calls with AI noise canceling - Minimization of damage through rapid information transmission

• others

In the oil industry, ensuring safety while working in environments with explosion hazards is the top priority. Radios are essential for emergency communication and daily interactions, but they must have explosion-proof performance and clear voice transmission. Especially in noisy areas like plants and oil fields where flammable gases are present, reliable communication is crucial. The HP788 complies with UL/CSA explosion-proof standards and achieves clear voice transmission through AI noise-canceling technology, supporting a safe working environment. 【Usage Scenarios】 * Work inside oil plants * Emergency communication in oil fields * Communication at hazardous material handling sites * Communication during maintenance work * Communication for security personnel 【Benefits of Implementation】 * Explosion-proof performance reduces the risk of explosions * AI noise-canceling ensures clear voice transmission for reliable information delivery * IP68 dustproof and waterproof performance allows use in harsh environments * Robustness compliant with U.S. military MIL-STD-810G standards ensures high durability * 24-hour operational time supports long-duration tasks

• others

The HP788 (HP-788) is a general-purpose portable radio manufactured by Hytera. It is an explosion-proof radio that meets UL913 and CSA explosion-proof standards. - Class 1, 2, 3, Division 1, Groups C-G, T4, -30°C to 60°C - Class 1, Division 2, Groups A-D, T4, -30°C to 60°C It complies with the ruggedness and durability standards of the U.S. military MIL-STD-810G. It supports UHF, VHF, analog, and digital (dual analog and digital) with an output of 1W to VHF 5W / UHF 4W. It has an IP68 rating for dust and water resistance, with a completely dust-tight structure and can be submerged in water at a depth of 2m for 4 hours without water ingress. Equipped with AI noise-canceling technology, it automatically reduces background noise and feedback using AI-based noise-canceling techniques. The water-repellent technology ensures that water does not accumulate on the speaker even in rainy conditions, providing clear audio. *For more details, please feel free to contact us.

• others

● PM-IP500 (PMIP500) is a location information display software made by Icom. ● It is software for managing GPS location information from Icom's IP radios on a computer. It is on-premises rather than cloud-based. ● A computer, mapping software (Shobunsha Super Mapple Digital 15/16 nationwide version is recommended), and IP500G are required (all sold separately). ● Install the mapping software on the computer, then install PM-IP500, and connect it to the IP500G for use. ● Internet connection is not required. ● No running costs are required. ● As of April 2022, in addition to IP500G, IP500M, IP501M, VE-PG4, and VE-SP2 are also compatible. ● PM-IP500 can be obtained for free from the PM-IP500 download. *For more details, please feel free to contact us.*

• others

In the hotel industry, rapid information sharing and precise instructions are essential. Collaboration between various departments, such as housekeeping, front desk, and security, is a crucial factor that influences customer satisfaction. In particular, real-time communication is indispensable for emergency responses and smooth service delivery. The DR-DPM80 enhances collaboration among hotel staff with clear audio, improving operational efficiency. 【Usage Scenarios】 - Communication among housekeeping staff - Communication between front desk and guest rooms - Collaboration among security staff - Communication among staff during events - Information sharing in emergencies 【Benefits of Implementation】 - Increased operational efficiency through rapid information transmission - Accurate information sharing with clear audio - Quick responses in emergencies - Improved customer satisfaction

• others

In the safety management of transportation systems, prompt and reliable information transmission is essential. During accidents or emergencies, accurate situational awareness and precise instructions are crucial to prevent the escalation of damage and ensure passenger safety. Digital simple radios enable smooth communication with clear audio, contributing to improved operational efficiency. The DR-DPM80 supports 82 channels for transmission and reception on land and within Japan's territorial waters, as well as 15 channels for aerial reception, facilitating extensive information sharing. 【Usage Scenarios】 - Operation management for buses, taxis, and railways - Coordination between the site and headquarters during accidents - Communication means for security personnel 【Benefits of Implementation】 - Reliable information transmission with clear audio - Ensured safety through rapid situational awareness and precise instructions - Improved operational efficiency

• others

In the forestry field, safe operations and efficient collaboration are essential. Quick and accurate communication is required in various situations such as logging, transportation, and on-site instructions. Especially in operations across extensive mountain forests, radios that can reliably convey information with clear audio are crucial. The DR-DPM80 was developed to meet the needs of such forestry operations. 【Usage Scenarios】 - Communication between teams during logging operations - Sharing progress updates during transportation tasks - Conveying instructions from the site manager - Rapid information sharing in emergencies 【Benefits of Implementation】 - Improved work efficiency - Enhanced safety - Faster information transmission - Strengthened teamwork

• others

In the logistics industry, accurate real-time information transmission is required for work instructions within warehouses and delivery route instructions. Especially in large warehouses or sites with multiple vehicles in operation, clearly conveying instructions with clear audio is essential for improving operational efficiency and safety. The DR-DPM80 is a solution that communicates instructions clearly to facilitate smooth operations. 【Usage Scenarios】 - Work instructions within the warehouse - Delivery route instructions - Communication on-site 【Benefits of Implementation】 - Faster transmission of instructions - Improved operational efficiency - Smoother communication

• others

In restaurants, quick information sharing is essential for conveying orders, giving cooking instructions, and responding to customers. Especially during peak times, smooth communication affects the quality of service. Walkie-talkies are indispensable for facilitating coordination between the kitchen and dining area, as well as among staff, thereby improving operational efficiency. The DR-DPM80 enables clear audio for rapid information transmission, allowing for high-quality service without keeping customers waiting. 【Usage Scenarios】 - Conveying orders - Giving cooking instructions - Communication among staff - Responding to customers 【Benefits of Implementation】 - Reduction of order mistakes and service time - Strengthening coordination among staff - Improvement in customer satisfaction

• others

The DR-DPM80 (DRDPM80) is a UHF 351MHz band digital simple radio registration station 3R/3T manufactured by Alinco. It can transmit and receive on 82 channels on land and 15 channels for aerial reception within Japanese territorial waters. The transmission output can be switched between 5W, 2W, and 1W. Compared to the previous model DR-DPM60 / DR-DPM60E, it has been reduced in size by approximately 45%, and it can also be used as a "megaphone" by connecting a commercially available horn (trumpet) speaker to the rear panel. It has an IP54 dust and water resistance rating (suitable for everyday water exposure). It can be used directly with both DC12V and DC24V, and existing DC cables can be used as is. The bracket is a slide type that is easy to attach and detach. With a front separation method, it allows for the use of the separately sold separation kit EDS-48 to separate the main unit and the front by 5 meters, making installation easier even in tight spaces. *For more details, please feel free to contact us.

• others

The F-1 (Round) K2D (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 5-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for antennas is φ25 to φ38. The adjustable band diameter range is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 5-element Yagi antenna 5DV-0608 in the 60 MHz band can be mounted. For more details, please feel free to contact our company.

• others

●C-SP-8 (CSP8) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 7.5m when extended and about 1.8m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

• others

●C-SP-6 (CSP6) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 5.6m when extended and about 1.7m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

• others

●C-SP-10 (CSP10) is a portable sky pole (telescopic) manufactured by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 9.4m when extended and about 1.9m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*

• others