エクセリ List of Products and Services

The "KRA-46" is a helical antenna manufactured by JVC Kenwood. It supports dual-band digital simple radio with frequency bands for registered stations (3R) at 360 MHz and licensed stations (3B) at 467 MHz. It is compatible with GPS functionality. If the radio equipped with this antenna supports GPS (location information) functionality, that feature can be used. The supported frequency range is from 350 MHz to 467 MHz. The antenna is a compact and lightweight helical antenna. Its length makes it ideal for use in dynamic situations or environments where you don't want the antenna to stand out. 【Compatible Models】 Digital Simple Radio Licensed Stations and Registered Stations - TCP-D751CT 【Features】 - Compact helical antenna - Supported frequency range: 350 MHz to 467 MHz - GPS functionality compatible - Supports licensed and registered stations - Antenna length: 11 cm For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, please feel free to contact us.

The "AH-150" is a directional antenna specifically designed for Icom's wireless LAN bridge. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum communication transmission distance can be extended to approximately 1 km. It is a directional antenna that efficiently receives radio waves from a specific direction. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 12.7m coaxial cable is included. 【Compatible Models】 Building-to-building communication unit SB-520 Wireless access point AP-900 Wireless LAN unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 1 km ■ Directional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The AH-154 is a directional antenna specifically designed for Icom's wireless LAN bridge. It can be used in combination with Icom's network devices. By using this product as an external antenna for network devices SB-520, AP-900, and SE-900, the maximum transmission distance can be extended up to 300 meters. It is a cardioid antenna that enhances the reception efficiency by preventing signals from certain directions. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 0.3m coaxial cable is included. 【Compatible Models】 Building-to-building communication unit SB-520 Wireless access point AP-900 Wireless LAN unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 300m ■ Directional antenna For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The AH-104 is a directional antenna specifically designed for Icom's wireless LAN bridge. It can be used in combination with Icom's networking equipment. By using this product as an external antenna for the networking devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 1 km. It is a directional antenna that efficiently receives signals from a specific direction. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 3m coaxial cable is included. [Compatible Models] Building-to-building communication unit SB-520 Wireless access point AP-900 Wireless LAN unit SE-900 [Features] ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 300m ■ Directional antenna For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The AH-166 is a flat antenna made by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 4 km. It is a directional antenna that efficiently receives radio waves from a specific direction. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 0.5m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 4 km ■ Directional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "AH-160" is a flat antenna manufactured by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 1 km. It is a directional antenna that efficiently receives signals from specific directions. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 2.0m coaxial cable is included. 【Compatible Models】 FWA Wireless LAN Terminal SE-900FW FWA Communication Unit BS-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 1 km ■ Directional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The AH-161 is an omnidirectional antenna for FWA equipment manufactured by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 1000 meters. It is an omnidirectional antenna that can receive and transmit signals from any angle without directionality. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 2.5m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 1000m ■ Omnidirectional antenna For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The AH-153 is a three-section collinear antenna made by Icom. It can be used in combination with Icom network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 300 meters. It is an omnidirectional antenna that can receive and transmit signals from any angle without directivity. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 0.3m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Capable of transmission up to 300m ■ Omnidirectional antenna For extremely low prices on earphone microphones, batteries, and more, trust Exceli. *For more details, please feel free to contact us.

The "AH-151VR" is an omnidirectional antenna made by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum transmission distance can be extended to approximately 400 meters. It is an omnidirectional antenna that can receive and transmit signals from any angle. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 2.5m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Capable of transmission up to 400m ■ Omnidirectional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "AH-170" is a flat antenna made by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum communication transmission distance can be extended to approximately 170 meters. It is a directional antenna that efficiently receives radio waves from a specific direction. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 2.5m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 170m ■ Directional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The "AH-171" is an omnidirectional antenna manufactured by Icom. It can be used in combination with Icom's network devices. By using this product as an external antenna for the network devices AP-900 and SE-900, the maximum communication transmission distance can be extended to approximately 50 meters. It is an omnidirectional antenna that can receive and transmit signals from any angle without directionality. By wrapping the included self-fusing tape around the antenna connector for waterproofing, it can be operated outdoors even in rainy weather. A 2.5m coaxial cable is included. 【Compatible Models】 Wireless Access Point AP-900 Wireless LAN Unit SE-900 【Features】 ■ Waterproofing possible with included accessories ■ Coaxial cable included ■ Transmission possible up to 50m ■ Omnidirectional antenna For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

The 3SL-0604 (3SL0604) is a 60MHz band three-element Yagi antenna manufactured by Nippon Antenna. It is a three-element Yagi antenna for receiving disaster prevention administrative radio communications. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *The compatible frequency range is from 55MHz to 70MHz, and the model number changes depending on the operating frequency. - Frequency 55-57.5MHz: 3SL-0604 f:55-57.5 (set) - Frequency 57-60MHz: 3SL-0604 f:57-60 (set) - Frequency 59.5-62.5MHz: 3SL-0604 f:59.5-62.5 (set) - Frequency 62-65MHz: 3SL-0604 f:62-65 (set) - Frequency 64.5-67.5MHz: 3SL-0604 f:64.5-67.5 (set) - Frequency 67-70MHz: 3SL-0604 f:67-70 (set) *For more details, please feel free to contact us.

The 12DV-450 (12DV450) is a 12-element Yagi antenna manufactured by Nippon Antenna for the 400MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod serving as the director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. *It is a single-directional fixed station radio antenna primarily composed of an antenna, reflector elements, and guiding elements. *It operates at a specified frequency within the range of 340 to 480MHz. Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-37(C). *For more details, please feel free to contact us.

The GB-060L-2-09EL (GB-060L209EL) is a 60MHz band vehicle-mounted element (MP type) manufactured by Nippon Antenna. It is a λ/4 shortened whip antenna with a capacity grounding type for disaster prevention administrative radio equipment operating in the 60MHz band. A whip antenna is defined as an antenna that has no directivity and can receive and transmit signals from any angle. It is a designated frequency within the 60MHz band. Please specify the center frequency (fo) in MHz when placing your order. It is designed for gutter mounting and should be used in combination with the separately sold roof side bases RSB-BA3-MJ or RSB-BA5-MJ. It is the same product as the antenna element GB-060L-2A-09. The antenna length is approximately 90cm. The feeding connector is MP. It complies with the European environmental regulation RoHS directive. For more details, please feel free to contact us.

The SBR-150S-7-09EL (SBR150S709EL) is a 150MHz band element manufactured by Nippon Antenna. It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. It features a shortened element. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. It is a specified frequency for the 150MHz band. Please indicate the fo (center frequency) in MHz when placing your order. The feed point connector is an M6 female thread. Please use it in combination with the separately sold bases SBR-BA3-09 and SBR-BA5-09. * A hex wrench is required for base installation. * For more details, please feel free to contact us.

The HGW-400-PS-09 365-385 (HGW400PS09) is a high-gain element (5/8λ type) for the 400MHz band manufactured by Nippon Antenna. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. ● It can be used with vehicle-mounted radios operating in the 365MHz to 385MHz range. ● It is a 5λ/8 collapsible whip antenna for the 400MHz band. ● The collapsible mechanism allows for 90 degrees to the left and right, and rotation from 0 to 360 degrees. ● It is equipped with an M.P type connector. ● This is just the antenna element, so it must be used in combination with a separately sold antenna base. * For more details, please feel free to contact us.

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitively grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please specify the fo (center frequency) in MHz when placing your order. ● It is a hole-mount type shortened 150MHz band element. ● The feeding part connector is an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

The 5DV-450 (5DV450) is a 5-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional antenna for fixed station radios, composed mainly of an antenna, reflector elements, and director elements. *It operates at a specified frequency within the range of 340 to 480 MHz. The model number changes depending on the operating frequency. - 340 to 390 MHz: 5DV-450 F=340-390 - 390 to 480 MHz: 5DV-450 F=390-480 *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding design, it can be mounted with rear support. *The recommended mounting brackets for the antenna are C-30 or C-19(C). *For more details, please feel free to contact us.

The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional antenna for fixed station radios, composed of an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes based on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.

The 75CSSK2H (75-CSSK-2H) is a 75cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 75cm CS antenna. This antenna is designed to prevent snow damage, featuring a heater on the reflector and converter arm, as well as a converter roof. The compatible mast diameter is φ48.6mm to φ89.1mm. The antenna mount and CS converter unit are sold separately. It is a RoHS compliant product. It is compatible with J-Alert. *For more details, please feel free to contact us.*

The 120CSSKH (120-CSSKH) is a 120cm snow-melting device-equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and compatible with J-Alert. *For more details, please feel free to contact us.*

The WX-SR152 (WXSR152) is an antenna station manufactured by Panasonic. It is an antenna-integrated receiver designed for small spaces. It serves as an antenna-integrated receiver for wireless microphones or portable wireless transmitters in the 1.9GHz digital wireless microphone system. Compatible devices include the boundary-type wireless microphone WX-ST700, handheld wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 with gooseneck microphone WM-KG645, splash-proof wireless microphone WX-ST210, dynamic wireless microphone WX-ST250, tie-clip wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. The 1.9GHz band enables high sound quality and stable communication resistant to radio interference and crosstalk. With the adoption of a compressed audio codec, it offers a wide audio frequency range of 100Hz to 15kHz and a newly developed noise suppression function for clear sound quality. The power is supplied from the base station WX-SP104R1.

The MG-060L-09EL (MG060L09EL) is a 60MHz band vehicle-mounted magnetic element manufactured by Nippon Antenna. It is a magnet-mounted, shortened element for radios operating in the 60MHz band. * A whip antenna is an antenna that has no directionality and can receive and transmit signals from any angle. * λ (lambda) refers to wavelength. * This is a specified frequency within the 60MHz band. Please specify the fo (center frequency) in MHz when placing your order. * The connector is an M6×1 female thread. * The coaxial cable and base are sold separately. They are to be used in combination with MG-BA3-09 or MG-BA5-09. * For more details, please feel free to contact us.

The GB-060L-09EL (GB060L09EL) is a 60MHz band vehicle-mounted element manufactured by Nippon Antenna. It is a capacitively grounded λ/4 shortened whip antenna that is mounted on a garter. A whip antenna is one that has no directivity and can receive and transmit signals from any angle. λ (lambda) refers to wavelength. This is a specified frequency in the 60MHz band. Please specify the fo (center frequency) in MHz when placing your order. The connector is an M6×1 female thread. The coaxial cable and base are sold separately and should be used in combination with GB-BA3-09 or GB-BA5-09. For more details, please feel free to contact us.

The GB-450A(CF)-09 is a 400MHz band vehicle-mounted whip antenna (3D-2V) manufactured by Nippon Antenna. It is designed for the Toyota Comfort. This is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The absolute gain is 2.15dB. It comes with an antenna element, a magnetic base, and a 3D-2V coaxial cable (5m). Note that connectors are not included. It features an attachment method that makes it easy to run cables, so after running the cable, you will need to attach a separately sold connector to connect it to the radio. It is mounted on the roof side. It operates on a specified frequency within the range of 350 to 470MHz. For more details, please feel free to contact us.

The WH-025A(F)(set) is an AM whip antenna manufactured by Nippon Antenna. It is a high-performance whip antenna for radio reception that can receive broadcasts from the AM band to the shortwave band with high sensitivity. *A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. The elements are made of strong stainless steel, providing excellent durability, and the main body is treated to prevent rust and corrosion. The feeding part at the base of the antenna uses an F-J connector, which is sold separately. It is also possible to waterproof it with the included waterproof cap. Coaxial cables of 3C-2V, 5C-2V, and 7C-2V can be connected. The included mounting bracket is compatible with mast diameters from φ40 to φ60 and can be attached to the mast. *For more details, please feel free to contact our company.

● The WH-025A(F) base is an AM whip antenna base made by Nippon Antenna. ● This is a maintenance base for the AM whip antenna WH-025A(F) (set). ● You can attach the element for the AM whip antenna WH-025A to this base. *For more details, please feel free to contact us.

● The WH-2M(MIX) is an AM whip-type antenna manufactured by Nippon Antenna. ● It is used for radio reception from the AM band to the shortwave band. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It is a radio sharing antenna that combines an antenna for AM radio and an AM/FM-TV mixer. ● It can receive signals with high sensitivity. ● FM and TV signals can be mixed and output through a single coaxial cable. ● The elements are coated with FRP and made of strong stainless steel, providing excellent durability, and the main body is treated to prevent rust and corrosion. ● The included mounting hardware is compatible with mast diameters from φ22 to φ50 and can be directly mounted on poles or walls. * For more details, please feel free to contact our company.

The HMG-450-5-09EL (HMG450509EL) is a 400MHz band high-gain magnetic element manufactured by Nippon Antenna. It is a 3λ/4 collapsible antenna element for radio equipment in the 400MHz band. It is a capacitive grounded 3λ/4 whip antenna. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It is used in combination with separately sold mobile station vehicle-mounted magnetic bases such as MG-BA5-09 and MG-BA3-09. This product is the same antenna element as the high-gain magnetic antennas HMG-450-5B-09 and HMG-450-5A-09 for the 400MHz band. It operates at a specified frequency within the 350-470MHz range, with two model numbers based on the operating frequency: - HMG-450-5-09EL 350-370: Frequency range 350-370MHz - HMG-450-5-09EL 450-470: Frequency range 450-470MHz. The connector is an M6×1 female thread. It features a collapsible mechanism. For more details, please feel free to contact us.

The HMG-450-5A-09 (HMG4505A09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (3D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. The package includes the antenna element, magnetic base, and coaxial cable 3D-2V (5m) MG-BA3-09. Note that connectors are not included. It features an attachment method that makes it easy to run the cable, allowing you to connect it to the radio after installation with a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.

The HMG-450-5B-09 (HMG4505B09) is a high-gain magnetic antenna for vehicles manufactured by Nippon Antenna, designed for the 400MHz band (5D-2V). It is an antenna that can be mounted on the car's rooftop using a magnet. It is a 3/4λ whip antenna for vehicle-mounted radios. A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a high-gain antenna with excellent signal transmission capabilities. The absolute gain is 4.15dB. It comes with an antenna element, a magnetic base, and a 5D-2V coaxial cable (5m) MG-BA5-09. Note that connectors are not included. It features an attachment method that makes it easy to run cables, allowing you to connect it to the radio after installing a separately sold attachment connector. It also has a folding mechanism. For more details, please feel free to contact us.

● The H-450 (H450) is an H-type antenna for window frames in the 450MHz band, manufactured by Nippon Antenna. ● It operates at a specified frequency within the range of 330 to 470MHz. Please specify the center frequency fo (in MHz) when placing your order. ● This is a vertical polarization omnidirectional 1/2λ dipole antenna for radio equipment. * A dipole antenna is one where elements less than half the wavelength are symmetrically arranged, allowing for the transmission and reception of horizontal radio waves in both directions. ● It is designed for mounting on the window frames of mobile stations such as fire trucks, jeeps, and passenger cars. ● The connector is N-J. * For more details, please feel free to contact us.

The D220S (D-220-S) is a compact mobile disc cone antenna manufactured by Diamond. A disc cone antenna is a flat antenna composed of a disc and a cone. It has a very wide usable frequency range and is lightweight and resistant to wind due to the disc and cone being used as elements. It is an antenna for radios. It can receive frequencies from 100 to 1600 MHz for wideband receivers. It can transmit in the 144/430/1200 MHz bands (DIGITAL compatible). It features a compact design and is a completely omnidirectional antenna. An omnidirectional antenna is one that can transmit and receive radio waves from all directions. It has an MP connector. This product is for sale only and cannot be explained in detail. It complies with the European environmental regulation RoHS directive. For more details, please feel free to contact us.

● The WH-260-NJ-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling type antenna without cable, manufactured by Nippon Antenna. * F=260-275 represents the frequency, and (set) means it includes elements, a base, and a coaxial cable. ● It features a drilling mount base with a mounting hole diameter of Φ16mm. ● This is a set product that includes a vehicle-mounted drilling type base (element mounting part M-6 screw) without cable N-JWH-BAN-M6-09 and a 260MHz band vehicle-mounted 1/4λ element (for WH) EL274 (antenna length EL27.4cm). ● It is a λ/4 antenna for radios operating in the frequency range of 260 to 275MHz. * λ (lambda) refers to wavelength. ● It is a whip antenna with a drilling mount type. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. ● It comes with an N-J type connector and is compatible with a mounting hole diameter of Φ16mm. ● This product complies with safety standards. * For more details, please feel free to contact us.

The WH-260B-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling antenna (5D-2V) manufactured by Nippon Antenna. It is an antenna for vehicle radios operating in the 260MHz band, such as digital disaster administrative wireless systems and fire and emergency digital radios. It is a capacitive ground λ/4 whip antenna. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * λ (lambda) refers to wavelength. The compatible frequency range is 260MHz to 275MHz. This product includes a 1/4λ element for the 260MHz band (for WH) EL274 and a vehicle-mounted drilling type base (element mounting part M-6 screw (5D-2V 4m) WH-BA5-M6-09). * The connector (attachment connector) is sold separately. * The element mounting part uses an M-6 screw. The installation location is the rooftop. Drilling installation work is required, and it is compatible with a mounting hole diameter of Φ16mm. * For more details, please feel free to contact us.

The UDF90W / UDF90B (UDF-90-W / UDF-90-B) is a slim UHF antenna manufactured by Nippon Antenna, designed for medium to strong signal areas. It is an outdoor digital terrestrial antenna suitable for strong and medium signal regions, equivalent to 20 elements, and is capable of receiving digital terrestrial broadcasts. The UDF90W is white, while the UDF90B is black. It can be easily installed using the included multi-bracket on antenna masts, balcony railings, or walls. Additionally, it can be installed on steel pipe columns using commercially available stainless steel bands sold separately. This antenna is exclusively for horizontal polarization reception, with receiving channels ranging from 13 to 52. The multi-bracket is compatible with antenna masts with a diameter of φ22 to 49mm. For more details, please feel free to contact us.

The WH-08/2G-L (WH082GL) is a whip antenna manufactured by Nippon Antenna. * A whip antenna is an antenna that has no directionality and can receive and transmit signals from any angle. The WH-08/2G-L is an external antenna for IoT that supports carriers as well as 3G / 4G LTE / LPWA (920MHz), WiFi, and Bluetooth. It has obtained construction design certification. It is a directly mounted antenna. The WH-08/2G-L connector is an SMA-P connector, so it can be connected if the connector on the housing side is an SMA-J connector. It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.