エクセリ List of Products and Services

"BbTALKIN ADVANCE" is a Bluetooth intercom manufactured by Onz Company. It can be mounted on a helmet and allows for hands-free simultaneous communication, similar to a phone call, with up to four people. This intercom is recommended for situations where timing coordination and quick communication are essential. When in use, it is stored in a waterproof case rated IPX7, making it suitable for a wide range of tough environments such as construction, civil engineering, and surveying. Even when stored in the waterproof case, each button on the intercom can be pressed, allowing for reliable operation even while wearing gloves. The microphone features a cancellation function that enables clear voice communication even in strong wind conditions, such as during work at high altitudes. The communication range is approximately 1.6 km in open spaces and locations with good visibility. 【Features】 ■ No license or registration required ■ Simultaneous communication with up to 4 people ■ IPX7 waterproof performance ■ Clear high sound quality ■ Lightweight and compact *For more details, please refer to the PDF document or feel free to contact us.

The "TLK150" is an IP radio manufactured by Motorola. It is a vehicle-mounted IP radio that combines the ease of PTT communication with a wide-area LTE network through the MOTOROLA IP radio service "WAVE Broadband Radio." It can communicate within the 4G/LTE coverage area of Docomo across Japan. Additionally, when connected to Wi-Fi, it can communicate globally without regional restrictions. There is no need for cumbersome procedures such as license applications or registration applications, and you can flexibly adjust the addition or cancellation of compatibility contract plans with various devices as needed on a monthly contract plan. With an IP54 dust and water resistance rating, you can use it with confidence even in harsh conditions such as rain, dust, drops, and extreme high or low temperatures. It offers clear high sound quality with minimal noise, allowing for clear communication even in noisy environments. A wide range of dedicated accessories is also available. You can also try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ No need for license or registration applications ■ Global communication available via Wi-Fi connection ■ Button layout focused on ease of operation ■ IP54 dust and water-resistant specifications *For more details, please refer to the PDF document or feel free to contact us.

The "IC-DPR4" is a digital simple radio registration station manufactured by Icom. Compared to the previous model, the IC-DPR3, it has a lighter and more compact design. With a maximum transmission output of 2W, it has better signal propagation compared to specific low-power transceivers, allowing for communication over a wider area. In addition to the main PTT (transmit) switch, it is equipped with a secondary PTT switch. By differentiating between the main PTT and the secondary PTT, you can instantly switch between two communication groups for sending and receiving. It has an IP67/57/54 dust and water resistance rating, making it safe to use even in rainy conditions or environments with dust. It also features a loudspeaker with a maximum output of 1000mW, allowing for clear audio reception even in noisy environments. A wide range of dedicated accessories is also available. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ Maximum transmission output of 2W ■ Equipped with a secondary PTT switch ■ IP67 dust and water resistance ■ Equipped with a loudspeaker with a maximum output of 1000mW *For more details, please refer to the PDF document or feel free to contact us.

The "DJ-P322" is a specific low-power transceiver manufactured by Alinco. It is a lightweight and compact specific low-power transceiver with a weight of less than 100g, including the battery and belt clip. You can choose from two types of antennas, middle and long, depending on your communication environment. Its palm-sized compactness allows you to use it by placing it in your chest pocket. With an IP67 dust and water resistance rating, it can be safely used in harsh environments such as construction sites and manufacturing plants, even in bad weather or dusty conditions. This transceiver has a variety of features and can be used in large areas when combined with a radio relay device. It can operate for about 33 hours on a single AA alkaline battery. We also offer a wide range of dedicated accessories. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ No license or qualification required ■ Operable with dry batteries ■ IP67 dust and water resistance ■ Compact and lightweight type *For more details, please refer to the PDF document or feel free to contact us.

The "IC-4400" is a specific low-power transceiver manufactured by Icom. Its ultra-compact and lightweight body is palm-sized, allowing for use without fatigue even during long hours of work. By combining it with the separately sold repeater IC-RP4150W, you can extend the radio waves in the following two ways: - Similar to a typical repeater, it can expand the usage area of the radio as a wireless relay device. - By utilizing wireless LAN or LTE lines (au/docomo), communication can be conducted over long distances between different stores or sites. Depending on your usage environment, you can choose between two types of antennas: a short antenna and a long antenna. With an IP67 dustproof and waterproof rating, you can use it with confidence even on rainy days or in environments with a lot of water splashes. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. [Features] - Equipped with a variety of functions ideal for improving work efficiency - Long-distance communication support with dedicated repeater - IP67 dustproof and waterproof performance - Choice of two types of antennas *For more details, please refer to the PDF document or feel free to contact us.

The "SR820V" is a digital simple radio licensed station manufactured by Yaesu Musen. With excellent basic performance and ease of use, it is the ideal digital simple radio for demanding tasks in construction sites and manufacturing factories. The large kanji-compatible display with high visibility LCD screen and large LED indicators allows you to easily see the current communication status and settings even at night or in dark places. Equipped with a GPS unit, it enables location management on the command center side by transmitting location information. It features Bluetooth functionality, allowing for cordless communication using compatible accessories. The built-in noise detection microphone unit enables clear voice transmission even in noisy environments, such as wind noise or machinery sounds on site. The built-in speaker delivers loud volume at 800mW with high sound quality, making it easy to hear clearly even amidst noise. A wide range of dedicated accessories is also available. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ Easy-to-read large screen ■ Clear transmission/reception ■ IP68 dustproof and waterproof performance ■ Equipped with GPS functionality *For more details, please refer to the PDF document or feel free to contact us.

The "SRM420V" is a digital simple radio licensed station manufactured by Yaesu Musen. A license application is required, but personal qualifications are not necessary. It features a top-class compact body among vehicle-mounted digital simple radios, allowing for installation in various limited spaces. It is equipped with Bluetooth functionality. When combined with a compatible headset, it enables complete hands-free communication using the VOX function. With an IP54 dust and water resistance rating, it can be safely used in environments with dust and sand, as well as on rainy days. Both the built-in speaker and the included microphone have a high output of 2W, improving the reliability of reception recognition in noisy environments. The backlit display supports kanji characters, allowing for easy visibility of settings and usage even at night or in dark places. A wide range of dedicated accessories is also available. You can try it for free before purchasing, so please feel free to contact us. [Features] ■ GPS location information management function ■ 5W high output ■ Bluetooth functionality ■ 2W high output speaker *For more details, please feel free to contact us.

The "SRM620V" is a digital simple radio license station manufactured by Yaesu Musen. A license application is required, but individual qualifications are not necessary. It features a top-class compact body among vehicle-mounted digital simple radios, allowing for installation in various limited spaces. It is equipped with Bluetooth functionality. When combined with a compatible headset, it enables complete hands-free communication using the VOX function. With an IP54 dust and water resistance rating, it can be safely used in environments with dust and sand, as well as on rainy days. Both the built-in speaker and the included microphone speaker have a high output of 2W, improving the reliability of reception recognition in noisy environments. The backlit display supports kanji characters, allowing for easy visibility of settings and usage conditions even at night or in dark places. A wide range of dedicated accessories is also available. You can try it for free before purchasing, so please feel free to contact us. 【Features】 ■ GPS location information management function ■ 5W high output ■ Bluetooth functionality ■ 2W high output speaker *For more details, please feel free to contact us.

The "SR920V" is a digital simple radio license station manufactured by Yaesu Musen. With excellent basic performance and ease of use, it is the ideal digital simple radio for demanding tasks in construction sites and manufacturing plants. The large kanji-compatible display with high visibility LCD screen and large LED indicators allows you to easily see the current communication status and settings even at night or in dark places. Equipped with a GPS unit, it enables position management on the command center side by transmitting location information. With Bluetooth functionality, you can make calls wirelessly using compatible accessories. It features a noise detection microphone unit that allows for clear voice transmission even in noisy environments, such as wind noise or machinery sounds on site. The built-in speaker delivers a loud volume of 800mW with high sound quality, making it easy to hear clearly even amidst noise. We also offer a wide range of dedicated accessories. You can request a free demo unit to try out in advance. 【Features】 ■ Easy-to-read large screen ■ Clear transmission/reception ■ IP68 dustproof and waterproof performance ■ Equipped with GPS functionality *For more details, please refer to the PDF document or feel free to contact us.

The "SRFD1" is a specific low-power transceiver manufactured by Yaesu Musen. It is a multi-party simultaneous communication type wireless system called "FAMICS," which supports unlimited simultaneous calls while in operation. This product is recommended for real-time coordination during loading operations or when operating heavy machinery. No dedicated base station is required; you can create a call group by setting up two specific SRFD1 units as base stations for simultaneous calls. You only need to secure the number of units necessary, so there are no extra options required. It is equipped with Bluetooth functionality. When combined with a compatible headset, it allows for complete hands-free communication using VOX functionality, preventing accidents caused by cable snags or tangles. We also offer a wide range of dedicated accessories. You can request a demo unit to try out for free, so please feel free to ask. 【Features】 ■ Bluetooth compatible ■ Simultaneous calls for multiple users ■ IP68 dust and water resistance ■ Lightweight and compact *For more details, please refer to the PDF document or feel free to contact us.

The "DS-2TD1217B-6/PA" is a thermal camera manufactured by NSS for measuring body surface temperature. It is capable of measuring the body surface temperature of up to 20 people without contact. Within a distance of 2 meters from the camera, it can instantly measure up to 20 individuals in one second. It is a dome-type camera designed for ceiling installation and operation. With the incorporation of high-performance AI (artificial intelligence), it achieves a high accuracy of ±0.5°C in measuring body surface temperature. If a temperature higher than the set threshold is detected, it can immediately notify the individual on-site without any contact. It can be used with a tripod, allowing for easy operation without the need for construction. It is also recommended for use in permanent installations as well as for sudden events. 【Features】 ■ Equipped with high-performance AI ■ Non-contact measurement capability ■ Instantly measures up to 20 people ■ High measurement accuracy of ±0.5°C ■ Installation possible without construction using a tripod *For more details, please refer to the PDF document or feel free to contact us.

The "SRS220" is a specific low-power transceiver manufactured by Yaesu Musen. With a simple key layout, it offers excellent operability, making it easy for beginners to use. It also features a key lock function to prevent accidental operation, helping to avoid communication troubles. You can choose between two types: the compact short antenna version, SRS220S, and the long antenna version, SRS220, which has better signal transmission. Its compact size fits neatly into a chest pocket, allowing for easy volume adjustment even when stored in the pocket. It boasts top-class IP68 dust and water resistance, so you can use it with confidence in rainy conditions or dusty environments. We also offer a wide range of dedicated accessories. You can try out a demo unit for free, so please feel free to ask. 【Features】 ■ Bluetooth-compatible accessories for calls ■ Compact size that fits in a chest pocket ■ IP68 dust and water resistance ■ Choice of short or long antenna ■ High-quality speaker included *For more details, please refer to the PDF document or feel free to contact us.

The "SRS210" is a specific low-power transceiver manufactured by Yaesu Musen. With its simple key layout, it offers excellent operability, making it easy for beginners to use. It also features a key lock function to prevent accidental operations, helping to avoid communication troubles. You can choose between two types: the compact short antenna version, SRS210S, and the long antenna version, SRS210, which has better signal transmission. Its compact size fits neatly in a chest pocket, allowing for easy volume adjustment even while stored. It boasts top-class IP68 dust and water resistance, so you can use it with confidence in rainy conditions or dusty environments. We also offer a wide range of dedicated accessories. You can try out a demo unit for free, so please feel free to ask. 【Features】 ■ Clear communication with minimal noise ■ Compact size that fits in a chest pocket ■ IP68 dust and water resistance ■ Choice of short or long antenna ■ Equipped with a high-quality speaker *For more details, please refer to the PDF document or feel free to contact us.

The "NSAC-TH1001" is an access control and thermal AI camera manufactured by NSS. It can register up to 22,400 facial images, and since temperature checks and facial recognition are logged, it is effective for daily temperature checks during office attendance. It can recognize staff even when they are wearing masks, eliminating the need to remove masks and saving time. By managing with facial recognition and ID, employees' faces can be used as employee IDs, preventing impersonation or transfer of employee IDs when managing access to specific areas. This allows for safe operations when integrated with security systems. If a temperature above the set threshold is detected, it can instantly notify with an image alert without contacting the individual, reducing the risk for those conducting the checks. It is suitable for companies and factories managing employee attendance. 【Features】 ■ High-performance AI equipped ■ Non-contact measurement capability ■ Up to 22,400 facial images can be registered ■ Security control through facial recognition ■ Usable for attendance management and more *For more details, please refer to the PDF document or feel free to contact us.

The SRM320 is a digital simple radio registration station manufactured by Yaesu Musen. A simple registration is required, but no personal qualifications are necessary. It features a compact body that ranks among the top in vehicle-mounted digital simple radios, allowing for installation in various limited spaces. It is equipped with Bluetooth functionality. When combined with a compatible headset, it enables complete hands-free communication using the VOX function. With an IP54 dust and water resistance rating, it can be safely used in environments with dust and sand or on rainy days. Both the built-in speaker and the included microphone speaker have a high output of 2W, enhancing the reliability of reception recognition in noisy environments. The backlit display supports kanji characters, allowing for easy visibility of settings and usage conditions even at night or in dark places. A wide range of dedicated accessories is also available. You can try it for free before purchasing, so please feel free to contact us. 【Features】 ■ GPS location information management function ■ 5W high output ■ Bluetooth functionality ■ 2W high output speaker *For more details, please feel free to contact us.

The "DJ-DPS71" is a digital simple radio registration station manufactured by Alinco. This product adds Bluetooth functionality to the conventional DJ-DPS70, allowing audio accessories to be operated wirelessly, enhancing convenience and safety. It features a sturdy and robust housing made of reinforced polycarbonate, making it highly recommended for use in tough environments. With an IP68 dust and water resistance rating, it can be safely used in harsh conditions such as bad weather, construction sites, and manufacturing plants where dust and sand are present. It is equipped with a loud 700mW speaker, ensuring clear audio even in noisy environments like construction sites and factories. A wide range of dedicated accessories is also available. You can request a free demo unit to try out beforehand, so please feel free to ask. 【Features】 ■ No license or qualification required ■ Built-in loud 700mW speaker ■ IP68 dust and water resistance ■ Sturdy and robust housing ■ Compatible with Bluetooth accessories *For more details, please refer to the PDF document or feel free to contact us.

The "IP200H" is a wireless mobile IP phone manufactured by Icom. In addition to the functions of an IP radio, it is a high-performance portable IP phone equipped with features such as internal and external calls. It is recommended for remote work and satellite offices. Calls can be made via a wireless LAN access point, allowing for the realization of an internal phone system without incurring running costs. It is equipped with functions equivalent to traditional office phones and in-house PHS, such as hold and transfer, and can also make group calls (broadcast communication) like a regular transceiver, making it excellent for urgent communications. Using the wireless LAN access point as a relay device, calls can be made between terminals on the same LAN. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ Supports internal and external calls within the office ■ IP phone functionality allows communication across offices ■ Can use existing Wi-Fi ■ Compatible with au/docomo dual SIM *For more details, please refer to the PDF document or feel free to contact us.

The "IP200PG" is a wireless IP intercom manufactured by Icom. It is a stationary IP phone that can be installed in key areas such as offices and reception areas, functioning like an intercom. It is ideal for communication with a large number of unspecified visitors to the office or for shared use among multiple people in factory lines. Using a wireless LAN access point as a relay device, it allows communication between terminals on the same LAN. Existing access points for computers or smartphones can be utilized as they are, and by using a dedicated SIM from Icom (au/NTT Docomo) with an LTE connection, calls can be made nationwide in Japan. Additionally, it supports dual SIM for redundancy during emergencies. We also offer a wide range of dedicated accessories. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ Easy-to-install stationary type ■ IP phone functionality allows communication across offices ■ Can use existing Wi-Fi ■ Supports dual SIM from au/docomo *For more details, please refer to the PDF document or feel free to contact us.

The "EVX-S24" is a standard model general-purpose radio for business use. It is a general-purpose radio operating in the UHF band (403MHz to 470MHz) that supports both analog and digital communication methods. Its compact and lightweight design makes it easy to wear for long periods without much burden. With a powerful audio output of 500mW, it allows for clear audio reception even in noisy environments such as construction sites and manufacturing plants. The analog frequencies are compatible with existing analog general-purpose radios, allowing for mixed operation. It meets the U.S. military standards MIL-STD-810C/D/E/F/G, providing high durability even in harsh environments. It is equipped with a USB charging port, allowing it to be charged by connecting to a USB charger. A wide range of dedicated accessories is also available. You can request a free demo unit to try out in advance. 【Features】 ■ Lightweight and compact design for long usage ■ 500mW speaker for clear audio communication ■ IP67 dust and water resistance ■ Charging via microUSB *For more details, please refer to the PDF document or feel free to contact us.

The "TCP-U90F" is a specific low-power transceiver manufactured by JVC Kenwood. It is a specific low-power transceiver that allows for simultaneous one-on-one communication. It comes as an all-in-one package with a lithium-ion battery pack and a rapid charger, ready to use from the day of purchase. It supports four communication modes, allowing you to change the communication method according to the environment and situation. It can be used for up to approximately 30 hours with three AA alkaline batteries. It features a VOX function that automatically activates the PTT switch when you speak during half-duplex communication. You can extend the range of communication using a wireless relay device, and the TCP-U90F itself can also be used as a relay device. The transmission output can be switched from 10W to 1mW. A wide range of dedicated accessories is also available. We offer free demo units for you to try out beforehand, so please feel free to ask. 【Features】 ■ Supports simultaneous one-on-one communication ■ Four communication methods ■ VOX function for automatic transmission ■ Can operate the TCP-U90F itself as a relay device *For more details, please feel free to contact us.

The "SRFD1M" is a specific low-power transceiver manufactured by Yaesu Musen. It is a vehicle-mounted radio device that supports multi-party simultaneous communication through the multi-user simultaneous communication system "FAMICS," which allows unlimited simultaneous calls while in operation. This product is recommended for situations where real-time coordination is needed during loading operations or when operating heavy machinery. There is no need for a dedicated base unit; you can create a communication group by setting up two specific SRFD1/SRFD1M units as base units for simultaneous communication. There are no restrictions on the number of connected units, and as long as you are part of the communication group, a third unit or more can easily join the simultaneous communication using the PTT button or VOX function. It has a compact design that allows for flexible installation according to the vehicle or location being used, whether it be ceiling-mounted or stationary. A wide range of dedicated accessories is also available. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ Recommended for loading operations and heavy machinery operators ■ Simultaneous communication for up to 2 people ■ Compact size with high installation flexibility ■ Easy pairing *For more details, please refer to the PDF document or feel free to contact us.

The DJ-PHM20 is a specific low-power transceiver in the form of a helmet-mounted headset. Compared to the conventional DJ-PHM20, it now supports a maximum of 4 simultaneous callers and allows for longer operation times by utilizing an external battery. Since it can be operated wirelessly, there is no worry about getting caught on anything while working, making it ideal for crane rigging, heavy machinery operations, construction sites, and factories. It features IP67 dust and waterproof performance, allowing for safe use even in rain or dusty conditions. It supports four types of communication methods: alternating calls, relay calls, linked relay calls, and simultaneous calls among 2 to 4 users, enabling you to choose the communication method that suits your environment. With a high-performance antenna built into the unit, it has minimal impact on the human body, ensuring both safety and compactness. It is equipped with a headphone jack, allowing for clear audio even in noisy environments. 【Features】 - Supports alternating relay calls and simultaneous calls among 4 users - Can be worn on either side - Wireless operation - IP67 dust and waterproof performance - Compact operation with built-in antenna *For more details, please refer to the PDF document or feel free to contact us.

The DLS-01 is a hands-free speaker manufactured by Alinco. It can amplify voice when it is necessary to maintain distance between individuals, such as during situations requiring social distancing, while preventing the spread of droplets during speech. When combined with the included headset microphone EME-844, it can be used hands-free. With a body weight of 134g and a headset weight of 36g, it is ultra-lightweight, allowing for stress-free use even over long periods. The speaker itself has an IP67 rating for dust and water resistance, so it can be used without being affected by wet hands or splashes. The volume can be adjusted in 10 levels. By pressing the standby switch, it can easily transition to standby mode when amplification is not needed. Using the included charging cable, it can be used for approximately 8 hours on a single charge. 【Features】 ■ Hands-free operation ■ Ultra-lightweight design: 134g for the main unit and 36g for the headset ■ Easy attachment with the belt clip on the back of the speaker ■ IP67 dust and water resistance ■ Up to 8 hours of use on a single charge *For more details, please refer to the PDF document or feel free to contact us.

The "UBZ-LS20" is a specific low-power transceiver manufactured by JVC Kenwood. It incorporates an antibacterial and antiviral cell feel, making it possible to use it more hygienically compared to the conventional model, the UBZ-LP20. Optional products can be shared with conventional models such as the UBZ-LM20, UBZ-LP20, and UBZ-LP27R, allowing for cost-effective replacements from older models. It features an easy-to-operate rotary volume knob that can be used even with gloved hands, and the enlarged operation keys enhance operational reliability. You can choose from four colors—red, yellow, black, and silver—according to the environment in which it will be used. The rotary antenna can rotate 180°, allowing it to be folded down for compact transport when not in use or for short-distance communication. 【Features】 - Can be operated in a reception-only setting as a guide system - 180° rotating antenna - Operates on three AA batteries - IP54 dust and water resistance *For more details, please refer to the PDF document or feel free to contact us.

The "UBZ-LS27R" is a specific low-power transceiver manufactured by JVC Kenwood. It incorporates an antibacterial and antiviral cell feel, making it more hygienic to use compared to the conventional model UBZ-LP20. Optional accessories are compatible with existing products such as UBZ-LM20, UBZ-LP20, and UBZ-LP27R, allowing for cost-effective replacements from previous models. It features an easy-to-operate rotary volume knob that can be used even with gloved hands, and the enlarged operation keys enhance operational reliability. You can choose from four colors: red, yellow, black, and silver, depending on the environment in which it will be used. The rotary antenna can rotate 180°, allowing it to be folded down for compact transport when not in use or for short-distance communication. It can be combined with the wireless relay device UBZ-RJ27 to expand the communication area. 【Features】 - Can be operated in a reception-only setting as a guide system - 180° rotating antenna - Operates on three AA batteries - IP54 dust and water resistance *For more details, please refer to the PDF document or feel free to contact us.

The "DJ-PX10" is a specific low-power transceiver manufactured by Alinco. It is an ultra-lightweight radio device with a compact size, weighing approximately 21g including the clip. Compared to the conventional model DJ-PX7, it has been slimmed down by 30% in volume and over 40% in weight. The power can be turned on and off by connecting an earphone, which helps prevent forgetting to turn off the power. The operational keys included are only the power switch on the front, the PTT button, and the volume adjustment button on the side, allowing for intuitive operation that even beginners can easily use. It can be attached to a chest pocket or collar without feeling heavy, thanks to the clip on the back. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ Reduces noise and lessens the burden on the ears ■ Significantly expands the area with a radio relay ■ Comes with a rotating clip that can be attached anywhere ■ Ultra-compact lightweight type ■ Equipped with a Φ3.5mm earphone jack *For more details, please refer to the PDF document or feel free to contact us.

The "LEX L11j" is a Motorola-made PS-LTE compatible IP MCA Advance radio. It is a radio equipped with the functions of an IP radio and digital MCA radio, compatible with the PS-LTE MCA radio system "MCA Advance," which uses a dedicated radio line. Due to its use of IP and MCA lines, it offers high communication reliability, making it a recommended radio for use in emergencies such as disasters. The MCA line allows for standalone operation of hardened large-zone relay stations, enabling communication in local areas even when the network is disrupted during disasters. Additionally, the backhaul line is also redundant, allowing for voice data communication even if one line goes down. With its lightweight and compact body, it can be easily handled by beginners and can be used for long periods without causing fatigue. Its drop and shock resistance complies with the MIL standards set by the U.S. Department of Defense, providing high shock resistance in cases of accidental drops. 【Features】 ■ High communication reliability ■ Clear high sound quality ■ High robustness compliant with U.S. MIL standards ■ IP67 dust and water resistance *For more details, please refer to the PDF document or feel free to contact us.

The "KC-PS701" is a Kyocera-made IP/MCA Advance wireless device. It is a wireless unit equipped with the functions of an IP radio and digital MCA radio, compatible with the MCA wireless system "MCA Advance," which uses a dedicated wireless line. Since it uses both IP and MCA lines, it offers high communication reliability, making it a recommended wireless device for use in emergencies such as during disasters. The MCA line allows for standalone operation of hardened large-zone relay stations, enabling communication in local areas even when the network is disrupted during disasters. Additionally, the backhaul line is also redundant, so voice data communication is possible even if one line goes down. The display supports "Glove Touch," which allows operation of the touch panel while wearing gloves, and "Wet Touch," which responds even when the screen or hands are wet. It has an IP67 dust and water resistance rating, making it suitable for use in harsh environments such as during rain or in dusty conditions. 【Features】 ■ High communication reliability ■ Clear high sound quality ■ High robustness compliant with US MIL standards ■ IP67 dust and water resistance *For more details, please refer to the PDF materials or feel free to contact us.

The "DS-K1TA70MI-T" is an access control and thermal AI camera manufactured by NSS. It does not require any special settings such as connecting to a computer and operates via a touch panel. With AI (artificial intelligence), it achieves a high accuracy of body surface temperature measurement with an error margin of ±0.5℃. If a temperature above the set threshold is detected, it can instantly notify with an image alert without any contact with the subject, thereby reducing the risk for the inspecting party. It is recommended for use at entrances of environments where many people gather or pass through, such as hospitals, offices, public institutions, hotels, leisure facilities, construction sites, and manufacturing plants. It can detect even when a mask is worn. It can recognize individuals in approximately 0.2 seconds, allowing for quick processing of large numbers of people. It comes with a dedicated stand, making installation easy. It can be powered from a household AC 100V power source. 【Features】 ■ High-performance AI equipped ■ Non-contact measurement capability ■ High precision with an error margin of ±0.5℃ ■ Easy installation with a dedicated stand ■ Recognizable even when wearing a mask *For more details, please refer to the PDF document or feel free to contact us.

The "VA110" is an AI temperature measurement station manufactured by JVC Kenwood. It enables non-contact, high-speed measurement of surface body temperature. It has a temperature measurement error of ±0.2 degrees and takes about 0.3 seconds to measure, notifying users of normal, high-temperature anomalies (alert notification on a red screen), and mask-required conditions (alert notification on a yellow screen). It can store up to 1 million temperature records and 20,000 records with facial photos in the main unit. It is a thermal camera that can measure while wearing a mask. It also excels in expandability, allowing for combinations such as: ● Centralized management of employee temperature checks and attendance through AI facial recognition connected to the cloud. ● A combination of Edge AI VA100 and surveillance network cameras, enabling photo search to locate individuals within the facility when a high temperature or specific person enters after being measured by VA100, using multiple surveillance camera footage and Edge AI. It comes with a dedicated stand, making installation easy. It can be powered from a household AC 100V power source. 【Features】 ■ Non-contact measurement capability ■ High-speed measurement in about 0.3 seconds ■ Easy installation with a dedicated stand ■ Recognizable even while wearing a mask *For more details, please refer to the PDF document or feel free to contact us.

● WithcallBiz is an IP radio manufactured by Icom. ● It is an IP radio that allows group calls anywhere in Japan using au's LTE network. ● No setup is required. You can use it simply by matching the channel and pressing the PTT button. ● It can be purchased by corporations, organizations, and individuals. ● You can communicate with the IP radio app IP300APP. ● By using the Icom specific low-power relay device IC-RP4130GW compatible with LTE communication, you can communicate with the specific low-power transceivers IC-4400 and IC-4400L. * Communication between Withcall Biz and IP300APP does not require a relay device. * You cannot communicate with IP500H, IP501H, IP502H, or IP700. ● By combining it with specific low-power transceivers that do not incur opening fees or line usage fees, you can establish a low-cost communication network in service industries such as restaurants, hotels, and security, as well as in construction and surveying industries. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask.

The "VN-H68" is an HD network camera manufactured by JVC Kenwood. In addition to its 1920×1080 full HD high resolution, it captures a wide range of video information clearly at a high frame rate of up to 60fps, allowing for smooth high-quality monitoring. It is equipped with a high-performance WDR function that uses a dual shutter system, enabling it to capture clear images with excellent visibility even in backlight or conditions with significant differences in brightness. Thanks to its superior WDR capabilities, it supports systems such as "Intelligent Video Analysis (IVA)," "Face Recognition," and "Vehicle License Plate Recognition." When combined with optional AI temperature screening stations or video recorders for surveillance cameras, it can also be operated as an unmanned reception system for infection control measures. We offer a wide range of dedicated accessories. You can also request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ 1920×1080 full HD high resolution ■ High frame rate of up to 60fps ■ Excellent WDR function ■ Usable for infection control measures *For more details, please refer to the PDF materials or feel free to contact us.

The "VN-H268R" is an HD network camera manufactured by JVC Kenwood. In addition to its full HD resolution of 1920×1080, it captures a wide range of video information clearly at a high frame rate of up to 60fps, allowing for smooth high-quality monitoring. It is equipped with a high-performance WDR function that utilizes a dual shutter system, enabling it to capture clear images with excellent visibility even in backlighting or conditions with significant differences in brightness. Thanks to its superior WDR capabilities, it supports systems such as "Intelligent Video Analysis (IVA)," "Face Recognition," and "Vehicle License Plate Recognition." When combined with optional AI temperature screening stations or video recorders for surveillance cameras, it can also be used as an unmanned reception system for infection control measures. We offer a wide range of dedicated accessories. You can also request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ Full HD resolution of 1920×1080 ■ High frame rate of up to 60fps ■ Excellent WDR function ■ Usable for infection control measures *For more details, please refer to the PDF materials or feel free to contact us.

The "VN-H168WPR" is an HD network camera manufactured by JVC Kenwood. In addition to its 1920×1080 full HD high resolution, it captures a wide range of video information clearly at a high frame rate of up to 60fps, allowing for smooth high-quality monitoring. It is equipped with a high-performance WDR function with a dual shutter system that enables clear video capture in backlight or conditions with significant differences in brightness. It features an outdoor installation housing with IP66 dust and water resistance. When combined with separately sold AI temperature measurement stations or video recorders for surveillance cameras, it can also be used as an unmanned reception system for infection control measures. A wide variety of dedicated accessories are also available. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ 1920×1080 full HD high resolution ■ High frame rate of up to 60fps ■ Excellent WDR function ■ Usable for infection control measures *For more details, please refer to the PDF document or feel free to contact us.

The ASI7213Y-V3-T1 is an access control and thermal AI camera manufactured by NSS. It is a thermal AI camera that can be efficiently used at building entrances for monitoring entry and access. Thanks to AI (artificial intelligence), it achieves a high accuracy of body surface temperature measurement with an error margin of ±0.5℃. When a temperature above the set threshold is detected, it instantly notifies with an image alert without any contact with the subject, thereby reducing the risk for those conducting the checks. It can register up to 50,000 facial images, and both temperature checks and facial recognition are logged, making it effective for daily temperature checks of staff when entering the office. You can set it up using a computer. All log data is stored on the computer, including facial images. It can recognize individuals even while wearing masks, eliminating the need to remove masks and thus saving time and improving turnover rates. 【Features】 ■ Non-contact measurement ■ High accuracy with an error margin of ±0.5℃ ■ Easy installation with a dedicated stand ■ Recognizes even when wearing a mask *For more details, please refer to the PDF document or feel free to contact us.

The "NSC-TH910" is a handheld thermal camera manufactured by NSS. It is a thermal AI camera that can be efficiently used at the entrance of buildings for admission and entry. This handheld type can be operated easily with one hand by anyone. Being rechargeable, it eliminates the need for troublesome wiring or securing installation locations, allowing for compact operation. It can recognize individuals even while wearing masks, saving the hassle of removing masks and reducing time, thus improving turnover rates. It achieves a high accuracy of ±0.5°C in measuring surface body temperature. By pulling the trigger on the handle, you can take snapshots. Using the included tripod (see image below), temporary fixed positioning can also be performed. The tripod is adjustable in height, allowing for flexible setup. 【Features】 ■ Non-contact measurement ■ High precision with ±0.5°C error ■ Easy operation with one hand ■ Recognizable even when wearing a mask ■ Approximately 6 hours of operation on a single charge *For more details, please refer to the PDF document or feel free to contact us.

The "NSC-TH910" is a handheld thermal camera manufactured by NSS. It is a thermal AI camera that can be efficiently used at building entrances for admission and entry. This handheld type can be operated easily with one hand by anyone. Being rechargeable, it eliminates the need for cumbersome wiring or securing installation locations, allowing for compact operation. It can recognize individuals even while wearing masks, reducing the hassle of mask removal and saving time, which can improve throughput. It achieves a high accuracy of ±0.5°C for surface body temperature measurement. By pulling the trigger on the handle, you can take snapshots. Using the included tripod (see image below), temporary fixed installations can also be performed. The tripod is adjustable in height, allowing for flexible setup. 【Features】 ■ Non-contact measurement ■ High precision with an error of ±0.5°C ■ Easy operation with one hand ■ Recognizable even when wearing a mask ■ Operates for about 6 hours on a single charge *For more details, please refer to the PDF document or feel free to contact us.

The "IC-4310" is a specific low-power transceiver manufactured by Icom. Depending on the environment in which it is used, you can choose from three different colors. It has excellent IPX67 dust and waterproof performance, allowing you to use it safely even in splashes and rain. Due to its release during the COVID-19 pandemic, it also features antibacterial and antiviral processing through "Cellfeel." This high-end transceiver is equipped with many convenient functions for improving work efficiency and can operate for long periods with low power consumption. It is recommended for group use. It has a function that allows it to be used exclusively for receiving, making it suitable for use as a guide system during factory tours and similar activities. By combining it with wireless relay devices or network equipment, it is possible to expand the communication area. It can be operated efficiently according to the scale and number of people at the facility or site. You can also request a free trial in advance, so please feel free to ask. 【Features】 ■ Reliable IP67 high dust and waterproof performance ■ Up to approximately 20 hours of use on a single charge ■ Lightweight and compact size that is not burdensome ■ Possible to expand communication area with wireless relay devices *For more details, please refer to the PDF document or feel free to contact us.

The "IC-4310L" is a specific low-power transceiver manufactured by Icom. With a long antenna, it has better signal transmission than the IC-4310. It boasts an excellent IPX67 dust and water resistance rating, allowing for safe use even in splashes and rain. Due to its release during the COVID-19 pandemic, it also features antibacterial and antiviral processing through "Cellfeel." This high-end transceiver is equipped with many convenient functions for improving work efficiency and allows for long hours of operation with low power consumption. It is recommended for group use. It includes a function for dedicated reception, making it useful as a guide system for factory tours and similar activities. By combining it with wireless relay devices or network equipment, it is possible to expand the communication area. It can be operated efficiently according to the scale and number of people at facilities or sites. A free trial is available in advance, so please feel free to inquire. 【Features】 ■ Reliable IP67 high dust and water resistance ■ Up to approximately 20 hours of use on a single charge ■ Lightweight and compact size that is not burdensome ■ Possible expansion of communication area with wireless relay devices *For more details, please refer to the PDF document or feel free to contact us.

The SR235 is a specific low-power transceiver manufactured by Yaesu Musen. With a simple key layout, it offers excellent operability, making it easy for beginners to use. It also features a key lock function to prevent accidental operation, helping to avoid communication troubles. Bluetooth accessories can be used. Its compact size fits neatly in a chest pocket, allowing for easy volume adjustment even while stored in the pocket. It has top-class IP68 dust and water resistance, so you can use it with confidence in rainy or dusty environments. The battery is a built-in lithium-ion battery. A wide range of dedicated accessories is also available. You can request a free demo unit to try out beforehand. 【Features】 ■ Compatible with Bluetooth accessories for calls ■ Compact size fits in a chest pocket ■ IP68 dust and water resistance ■ Approximately 45 hours of operation with battery super save ON ■ Equipped with a high-quality speaker *For more details, please refer to the PDF document or feel free to contact us.

"Evolve" is an IP radio manufactured by Motorola. It is an IP radio that combines the ease of PTT communication with a wide-area LTE network line, as part of the MOTOROLA IP radio service "WAVE Broadband Radio." It can communicate within the 3G/4G/LTE areas across Japan. Additionally, when connected to Wi-Fi, it can communicate globally without regional restrictions. There is no need for cumbersome procedures such as license applications or registration applications, and you can flexibly adjust the addition or cancellation of compatibility contract plans with various devices as needed through a monthly contract plan. It is a rugged and reliable IP radio compliant with MIL-STD-810 standards. With clear high sound quality and minimal noise, it enables clear communication even in noisy environments. We also offer a wide range of dedicated accessories. You can also try out a demo unit for free in advance, so please feel free to let us know. 【Features】 ■ No license or registration application required ■ Global communication available with Wi-Fi connection ■ High dust and water resistance with IP68 rating *For more details, please refer to the PDF materials or feel free to contact us.

The "Softbank 601SJ" is an IP radio made by Softbank. It is a vehicle-mounted IP radio that can be used in cars. No license application or personal qualifications are required; you can use it with just a simple registration. You can communicate and make calls anywhere within the coverage area of Softbank's 3G, 4G, and 4G LTE networks across Japan. In 4G and 4G LTE areas, very fast call response is possible, while 3G allows calls in wide areas outside the LTE coverage. By using the separately sold GPS antenna NAY-3930G, you can utilize the geofencing feature, which sends notifications and alerts when entering pre-set areas on a map. This is particularly suitable for construction sites where there are few roads for vehicles or when driving in areas with heavy pedestrian traffic. *Softbank's GPS function is the best among our comparisons. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ No license or registration application required ■ Available for calls nationwide in Japan ■ Equipped with geofencing feature *For more details, please refer to the PDF materials or feel free to contact us.

The FTH-214 is a standard model specific low-power transceiver. It can be used without the need for personal qualifications or registration. Compared to the higher model FTH-314, the FTH-214 does not support radio relay devices, has slightly reduced waterproof and dustproof performance, and is priced lower. It is compatible with other specific low-power transceivers in normal mode across all 20 channels. *There is no compatibility with groups, secret conversations, relays, or individual calls of other specific low-power transceivers. The channel arrangement may vary. When using the separately sold nickel-hydrogen battery FNB-135, it can be charged via micro USB input (with a built-in micro USB compatible charger). It can be charged from a household power supply AC100V in 3 hours using the separately sold micro USB charger (100V-200V) PS000042A11. A wide range of dedicated accessories is also available. You can try it for free before purchasing, so please feel free to contact us. [Features] ■ Lightweight and slim design weighing 90g ■ Built-in charger compatible with micro USB ■ IP55 waterproof performance *For more details, please refer to the PDF document or feel free to contact us.

The "UBZ-M51SE/UBZ-M51S" is a specific low-power transceiver manufactured by JVC Kenwood. As of August 1, 2021, the UBZ-M51S has been changed to the model number UBZ-M51SE after being treated with Cellfeel antibacterial and antiviral processing. The differences between the new model UBZ-M51SE and the old model UBZ-M51S are as follows: - Cellfeel antibacterial and antiviral processing: Present in UBZ-M51SE, absent in UBZ-M51S - Voice scrambling function (secret mode): Absent in UBZ-M51SE, present in UBZ-M51S No personal qualifications or registration are required for use. Since it is manufactured by JVC Kenwood, which is also an audio manufacturer, the sound quality is very good and easy to hear. It has an IP54/55 dustproof and waterproof performance, allowing for safe use in rain and dust. We also offer a wide range of dedicated accessories. A free trial before purchase is available, so please feel free to contact us. 【Features】 - Lightweight design weighing 110g - Can be set as a receive-only device - Operates for up to approximately 29 hours on dry batteries *For more details, please refer to the PDF document or feel free to contact us.

The "ST#727BX/ST#727M" is a multi-user simultaneous communication wireless system manufactured by Tanizawa Seisakusho. It can be used without the need for a license or registration. With one master unit ST#727BX, you can combine up to three slave units ST#727M, allowing up to 10 people to communicate simultaneously without time limits while coordinating work during the operation of cranes and large machinery in manufacturing plants, thereby improving work efficiency. *When connecting master units, one each of the separately sold connection cables, coaxial PP20065 and connection cable PP20066, is required for each connection. It features simple operation and settings, making it easy for beginners to use. Equipped with an MCA (Multi-Channel Access) mode that automatically detects unused channels, it enables smoother communication. We also offer a wide range of dedicated accessories. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ No license or registration required ■ Up to 10 people can communicate simultaneously ■ Communication range approximately 100m in urban outdoor areas ■ Capacity can be increased by adding more units *For more details, please refer to the PDF document or feel free to contact us.