タクミナ List of Products and Services

The request from the chemical plant manufacturer was to circulate sulfuric acid at a temperature of 150°C and a concentration of 75% in the laboratory's experimental line. However, there were challenges such as wanting to "maintain a constant flow rate" and that "there were no products from other companies that met the conditions." Please download the PDF document to see the solutions to the challenges and requests. 【Customer's Challenges and Requests】 ■ Want to maintain a constant flow rate ■ Due to the need for high corrosion resistance, they prefer PTFE lining for the material ■ Assuming operation for about 10 hours a day ■ There were no products from other companies that met the conditions *For more details, please refer to the PDF document or feel free to contact us.

• pump

The resin product manufacturer requested to use a pump to inject additives into the resin extrusion molding machine. However, there were challenges such as "a pressure of over 5MPa is required at the injection point" and "the viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ A pressure of over 5MPa is required at the injection point ■ Pulsation in the pump causes uneven injection, so a continuous and consistent amount needs to be injected ■ The viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C ■ Due to high temperature and high pressure, safety measures are necessary ■ It should be movable rather than fixed to one location *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The request from the construction pipe manufacturer was to create a device for conducting quality conformity tests on resin pipes for construction. Furthermore, there was a request to "continuously flow chlorine water through the pipes for several months," with the conditions kept constant and tested at three different temperatures. Please refer to the PDF document for solutions to the challenges and requests. 【Customer's Challenges and Requests】 ■ Continuously flow chlorine water through the pipes for several months ■ Keep the conditions of residual chlorine concentration, pH value, water volume, and delivery pressure constant, and conduct tests at three different temperatures (95°C, 105°C, 115°C) *For more details, please refer to the PDF document or feel free to contact us.

• pump

The steel manufacturer found that the rainwater falling on the premises of the steelworks had a strong alkaline nature, and it was necessary to perform neutralization treatment to reuse this rainwater on-site. However, after consulting with multiple manufacturers, they faced challenges such as "the treatment volume and pH fluctuate significantly due to weather conditions, requiring a wide control range." For solutions to the challenges and requests, please download and view the PDF document. 【Customer's Challenges and Requests】 ■ We want to minimize the installation area of the equipment. ■ If we use pH neutralization treatment in a tank (batch method), we will need large tanks of over 100 tons, which will increase the installation area. ■ Due to significant fluctuations in treatment volume and pH caused by weather, it is necessary to accommodate a wide control range. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The local government (sewage treatment plant) was using a plunger pump to add a chelating agent (ferrous sulfate solution) to prevent the leaching of heavy metals contained in the incineration ash after incinerating sludge at the sewage treatment plant. However, there were issues such as "the piping vibrated due to the pump's pulsation, causing loosening and leaks" and "the pump had run dry and malfunctioned when the chemical tank was empty." For solutions to these issues and requests, please download and view the PDF materials. 【Customer's Issues and Requests】 ■ The piping vibrated due to the pump's pulsation, causing loosening and leaks. ■ The pump had run dry and malfunctioned when the chemical tank was empty. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The request from the manufacturer of water treatment equipment was for a ballast water treatment system to be installed on ships, with the desire to inject chemicals into seawater. However, there were challenges such as the need for "high reliability to strictly adhere to the discharge standards specified by the treaty" and "the treated water must be discharged directly into the sea, so it must be treated reliably." Please download the PDF document to see the solutions to the challenges and requests. 【Customer's Challenges and Requests】 ■ High reliability is required to strictly adhere to the discharge standards specified by the treaty. ■ Since there is a large variation in treatment volume, we want a wide control range for the chemical injection amount. ■ The treated water must be discharged directly into the sea, so it must be treated reliably. ■ Due to limited space on the ship, we want a compact system. ■ To reduce maintenance burden, we want robust and simple piping. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The beverage manufacturer was supplying sample water to the residual chlorine meter to measure the chlorine concentration of the rinsing water used for bottle washing. Currently, they are using bypass piping without a pump, but there are issues such as "the flow rate of the sample water is unstable, making it impossible to accurately measure the chlorine concentration" and "when emptying and cleaning the bottle washing tank, air and dirt get mixed into the residual chlorine meter." For solutions to the issues and requests, please download and view the PDF document. 【Customer's Issues and Requests】 ■ The flow rate of the sample water is unstable, making it impossible to accurately measure the chlorine concentration. ■ When emptying and cleaning the bottle washing tank, air and dirt get mixed into the residual chlorine meter. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The electronic component manufacturer was looking for a pump to supply liquid to a die coater, where UV-curable resin is applied in the manufacturing process of films for liquid crystal displays. They tried a rotary positive displacement pump, but encountered issues where the liquid gelled in the rotating part or cured at the shaft seal, causing the pump to stop, making it unusable. For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 - UV-curable resin has the property of solidifying under shear stress, making it difficult to handle. - They tried a rotary positive displacement pump, but encountered issues where the liquid gelled in the rotating part or cured at the shaft seal, causing the pump to stop, making it unusable. - Since the method involves applying the entire amount of liquid supplied by the pump, they want to transfer the specified amount with high precision in a continuous and constant flow. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The food manufacturer was transferring concentrated fruit juice (with a maximum viscosity of 20,000 mPa·s) from the raw material tank to the filling machine tank at a flow rate of 2 tons per hour. However, the existing rotary pump generated wear particles from the mechanical seal, which sometimes mixed into the liquid, leading to the need for frequent disassembly and inspection, presenting various challenges. For solutions to the challenges and requests, please download and view the PDF document. 【Customer's Challenges and Requests】 ■ Disassembly exposed the system to outside air, increasing the risk of bacterial growth with each inspection. ■ Specialized maintenance personnel were required, and the replacement parts were expensive, resulting in high maintenance costs. ■ Wear particles from the pump's mechanical seal sometimes mixed into the liquid, necessitating frequent disassembly and inspection. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The request from the OA machine manufacturer was to supply raw materials to the disperser in the color toner manufacturing line. However, we faced several challenges after trying various pumps, such as "the air-driven pump has too high a flow rate" and "even with a damper, we couldn't suppress the pulsation, resulting in intermittent flow." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ The air-driven pump has too high a flow rate. ■ Even with a damper, we couldn't suppress the pulsation, resulting in intermittent flow. ■ The tube pump not only has pulsation, but the tube also wears out due to the slurry liquid, leading to rubber debris contamination. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The local government (water purification plant) was using a diaphragm pump as a chemical injection pump when adding sodium hypochlorite as a disinfectant and polyaluminum chloride as a coagulant. However, there were challenges such as "the pulsation of the pump makes it impossible to measure the injection amount with a flow meter" and "it is necessary to go from the facility management building to the water purification tank to check the concentration." For solutions to these challenges and requests, please download and refer to the PDF document. 【Customer's Challenges and Requests】 ■ The pulsation of the pump makes it impossible to measure the injection amount with a flow meter. ■ It is necessary to go from the facility management building to the water purification tank to check the concentration. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The food manufacturer's request was to transfer concentrated nitric acid for use as a CIP cleaning solution to a dilution tank. However, they had been using a diaphragm pump with an air chamber to suppress pulsation, but if maintenance on the air chamber was neglected, the pulsation damping effect would be lost, leading to vibrations that caused cracks in the piping, resulting in nitric acid leaks and rusting of the equipment. For solutions to the issues and requests, please download and view the PDF materials. 【Customer's Issues and Requests】 ■ Neglecting maintenance on the air chamber leads to the loss of pulsation damping effect, causing vibrations that crack the piping and result in nitric acid leaks, which rusts the equipment. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The food manufacturer traditionally used a rotary volumetric pump to supply oil and seasoning liquid to the frying machine during the frozen food manufacturing process. However, there were challenges such as "the delivery volume was unstable, making it difficult to manage the seasonings" and "maintenance took a long time, and replacement parts were expensive." For solutions to these challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ The delivery volume was unstable, making it difficult to manage the seasonings. ■ Maintenance took a long time, and replacement parts were expensive. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The request from the cosmetics manufacturer was to create a device for mixing a liquid containing titanium dioxide microparticles with an oil-based liquid during the cosmetics manufacturing process. In addition, there were other requests such as "wanting to insulate the tank and piping because the liquid solidifies at low temperatures" and "wanting to continuously mix the two liquids in the piping and accurately control the mixing ratio." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ Wanting to insulate the tank and piping because the liquid solidifies at low temperatures ■ Wanting to continuously mix the two liquids in the piping and accurately control the mixing ratio *For more details, please refer to the PDF materials or feel free to contact us.

• pump

Battery manufacturers that supply carbon slurry (negative electrode material) to bead mills using pumps have traditionally used rotary positive displacement pumps. However, the components of the pump quickly wear out due to particles contained in the liquid, necessitating frequent parts replacements and regular disassembly for cleaning, and they have been struggling with poor cleanability of the shaft seal area. For solutions to these challenges and requests, please download and view the PDF document. [Customer's Challenges and Requests] - There was a need for frequent disassembly and cleaning, but the cleanability of the shaft seal area was poor. - The components of the pump wore out quickly due to particles in the liquid, requiring frequent parts replacements. - Since they were using a screenless type bead mill, a small amount of beads occasionally leaked out, causing beads to get caught inside the pump, leading to abnormal stops or pump failures. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The electronic materials manufacturer was using a rotary positive displacement pump for the liquid supply in the process of applying negative electrode materials for lithium-ion batteries onto sheets with a die coater. However, there were challenges and requests such as, "While the existing pump has no issues with initial performance, the flow rate decreases and pulsation occurs as the operating time increases," and "We would like to use a pump that can maintain high liquid delivery accuracy for a long period." For solutions to these challenges and requests, please download and view the PDF document. 【Customer's Challenges and Requests】 ■ We want to use a pump that can maintain high liquid delivery accuracy for a long time. ■ Since the die coater uses a full coating method, the pump's liquid delivery accuracy directly affects the coating quality. ■ While the existing pump has no issues with initial performance, the flow rate decreases and pulsation occurs as the operating time increases. *For more details, please refer to the PDF document or feel free to contact us.

• others

A chemical manufacturer requested to safely dilute sodium hydroxide (caustic soda) from a concentration of 48% to 25%. However, there were concerns that "there is a risk of intense heat generation during dilution, causing the liquid to splatter" and "there is a risk of serious injury if the liquid comes into contact with the human body." For solutions to these issues, please download and refer to the PDF materials. [Customer's Issues] ■ There is a risk of intense heat generation during dilution, causing the liquid to splatter. ■ There is a risk of serious injury if the liquid comes into contact with the human body. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

In a paper manufacturing company that transfers and injects dyes in the production process, a plunger pump was traditionally used. As a result, there were challenges such as "the existing pump has pulsation, so a flow meter cannot be used," "overfeed phenomena occur, causing flow to be unstable," and "there may be response delays (discharge delays and liquid dripping) when starting and stopping the pump." For solutions to these challenges, please download and view the PDF materials. 【Customer Challenges】 ■ The existing pump has pulsation, so a flow meter cannot be used. ■ Measurements are taken manually with a graduated cylinder, and the pump's discharge amount is adjusted manually. ■ Due to long-distance piping and small pipe diameter, overfeed phenomena occur, causing flow to be unstable. ■ There may be response delays when starting and stopping the pump. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

In the tire manufacturing process, rubber product manufacturers spray release agents using spray guns and have been using air-driven pumps for liquid supply. As a result, there were challenges such as, "The air-driven pump causes fluctuations in flow rate due to pressure variations on the discharge side, which can lead to excessive spraying," and "Release agents are expensive, so we want to eliminate waste and reduce costs." For solutions to these challenges, please download and view the PDF materials. [Customer Challenges] ■ The air-driven pump causes fluctuations in flow rate due to pressure variations on the discharge side, which can lead to excessive spraying. ■ Release agents are expensive, so we want to eliminate waste and reduce costs. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The request from the chemical manufacturer was to transport caustic soda through long-distance, high-head piping (with a total head of 85m) and inject it into the main pipeline. However, there were challenges such as "Since it is a hazardous liquid, pumps that pose a risk of liquid leakage cannot be used" and "Air chambers cannot be used at high heads (as air would dissolve into the transported liquid), so pulsating pumps cannot be used." For solutions to these challenges, please download and refer to the PDF document. [Customer's Challenges] ■ Since it is a hazardous liquid, pumps that pose a risk of liquid leakage cannot be used. ■ Air chambers cannot be used at high heads, so pulsating pumps cannot be used. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The request from the material manufacturer was to circulate the coating liquid to the gravure coater's liquid receiving pan during the manufacturing process of functional films. However, there were challenges such as "when the liquid level in the receiving pan ripples, it causes uneven coating thickness, so we want to supply it at a constant flow rate with as little pulsation as possible" and "we need to perform frequent cleaning, so we want to improve workability." For solutions to these challenges, please download and view the PDF document. [Customer's Challenges] ■ When the liquid level in the receiving pan ripples, it causes uneven coating thickness, so we want to supply it at a constant flow rate with as little pulsation as possible. ■ We need to perform frequent cleaning, so we want to improve workability. ■ Since we need to keep the ceramic particles circulating to prevent them from settling, the pump wears out quickly and is prone to breaking. *For more details, please refer to the PDF document or feel free to contact us.

• pump

The request from the steel manufacturer was to mix four types of liquids to apply a coating agent on the surface of electrical steel sheets and supply it to a roll coater. However, each liquid was transferred to a tank using a hydraulic diaphragm pump, and after stirring and mixing, it was supplied to the roll coater. As a result, there were issues such as "variations in concentration due to uneven stirring in the tank" and "operators having to constantly monitor the concentration in the stirring tank and manually adjust the four pumps." For solutions to these issues, please download and view the PDF document. [Customer's Issues] ■ Variations in concentration due to uneven stirring in the tank ■ Operators must constantly monitor the concentration in the stirring tank and manually adjust the four pumps *For more details, please refer to the PDF document or feel free to contact us.

• pump

The request from the casting manufacturer was to create sand molds for casting by adding a hardener to the sand during the manufacturing process. However, there was a challenge where the hardener leaked from the pump's shaft seal, came into contact with air, and solidified, causing the pump to fail. The hardener was supplied using a gear pump, and the injection amount was controlled by an electromagnetic valve. For the solution to this issue, please download and refer to the PDF materials. 【Customer's Challenge】 ■ The hardener leaking from the pump's shaft seal comes into contact with air and solidifies, causing the pump to fail. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The request from the steel manufacturer was to send 98°C hydrochloric acid containing metal powder to a concentration analyzer in order to manage the concentration during the pickling process. However, due to the use of an air-driven diaphragm pump, there were challenges such as "the diaphragm quickly tearing due to the hydrochloric acid containing high-temperature metal powder, necessitating frequent diaphragm replacements." For solutions to these challenges, please download and refer to the PDF document. 【Customer's Challenges】 ■ The diaphragm quickly tears due to hydrochloric acid containing high-temperature metal powder, requiring frequent diaphragm replacements. ■ Measurement values were unstable due to the pulsation of the pump. *For more details, please refer to the PDF document or feel free to contact us.

• pump

In the process of diluting concentrated sulfuric acid with industrial water, a diaphragm pump is used at a chemical manufacturer. To suppress the pump's pulsation, an air chamber was installed in the piping. As a result, there were challenges such as "the need to frequently inspect the air chamber and replenish air" and "pulsation causing flow errors, which can lead to equipment shutdown." For solutions to these challenges, please download and view the PDF materials. 【Customer Challenges】 ■ The need to frequently inspect the air chamber and replenish air ■ If air replenishment is neglected, pulsation occurs and liquid may relieve at abnormal pressure, preventing the injection of the specified amount of sulfuric acid and achieving the desired concentration ■ Pulsation can cause flow errors, which may lead to equipment shutdown *For more details, please refer to the PDF materials or feel free to contact us.

• pump

A manufacturer of automotive parts that applies coatings to automotive components was using a plunger pump for liquid supply. As a result, there were challenges such as "wear of the sliding parts causing liquid leakage" and "using an air chamber but not completely eliminating pulsation, leading to uneven coating." For solutions to these challenges, please download and view the PDF materials. 【Customer Challenges】 ■ Wear of sliding parts (plunger, plunger seal) causing liquid leakage ■ Pulsation not completely eliminated, leading to uneven coating ■ Considered using a non-pulsating rotary pump, but it could not be used due to color variation caused by shear and friction heat *For more details, please refer to the PDF materials or feel free to contact us.

• pump

In an electronic component manufacturer that applies electronic materials to substrates using a die coater, a rotary metering pump was used for liquid supply. As a result, there were issues such as "wear particles from the pump contaminating the liquid, leading to metal contamination," "a decrease in liquid supply due to pump wear, causing changes in film thickness," and "time-consuming disassembly, cleaning, and reassembly." For solutions to these issues, please download and view the PDF document. [Customer's Issues and Requests] ■ Wear particles from the pump contaminating the liquid, leading to metal contamination ■ Decrease in liquid supply due to pump wear, causing changes in film thickness ■ Time-consuming disassembly, cleaning, and reassembly *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "Mekkin Pack ATCM Series" is an automatic chlorine injection device that measures the residual chlorine concentration in a water storage tank and automatically injects additional chlorine. It controls the chlorine concentration to the target level at all times, regardless of the tank capacity or usage. With precise control, it prevents excessive injection of sodium hypochlorite and reduces chlorine odor. 【Features】 ■ Space-saving design for easy installation ■ Eco-friendly design with no wastewater ■ Controls to the target chlorine concentration at all times, regardless of tank capacity or usage ■ Prevents excessive injection of sodium hypochlorite with precise control ■ Reduces chlorine odor *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "FP-PTS" hypochlorous acid water supply unit provided by Takumina, a precision pump manufacturer. The "FP-PTS" is a disinfectant water supply unit that allows you to easily create safe disinfectant water just by connecting it to a faucet and an outlet. It is easy to install and operate. It can be set to a wide range of chlorine concentrations from 10 to 300 mg/L. It is highly effective for various applications, including disinfecting equipment and facilities, disinfecting restaurants and kitchens, and disinfecting livestock facilities. 【Features】 ■ A compact unit with everything integrated ■ Provides a consistently stable concentration of disinfectant water regardless of the water pressure ■ Easy to install and operate ■ Wide range of chlorine concentration settings from 10 to 300 mg/L ■ Convenient cart type for mobility *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "CLT-10" is a product that allows for accurate and easy residual chlorine measurement using the DPD method, in accordance with the drinking water testing method. It is a single-use stick-type packaged reagent that provides stable coloration and easy measurement. Additionally, we also offer the "Water Tester II," which allows for easy measurement of residual chlorine and pH in a portable set. 【Features】 ■ High-precision residual chlorine measurement ■ Easy measurement with stable coloration ■ Single-use stick-type packaged reagent ■ Lightweight and compact portable type ■ Comes with a dedicated case *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection

The leading company in precision pumps, Takumina, presents the 'Safety Pump' with excellent operability and mobility. It allows for easy transfer and dispensing of chemicals while avoiding various hazards during the process. It contributes to improving work efficiency and ensuring safety. Additionally, we offer a wide variety of options for power sources and wetted materials, making it suitable for various applications and environments. 【Features】 ■ From strong acids and strong alkalis to solvents ■ Metering and compact design ■ Reduces residual liquid in containers ■ Ideal for transferring and dispensing chemicals ■ Excellent operability and mobility *For more details, please refer to the PDF document or feel free to contact us.

• pump

Leading company in precision pumps, Takumina's "pH Meter" We offer a lineup including the "P-1500 (panel mount type)" capable of two-point time division proportional control in the output, as well as the "P-505SH (panel mount type)" and "P-2100 (field type)." 【P-1500 Panel Mount Type】 ● Number of output points: 4 points Selectable upper and lower alarm outputs, control output (ON/OFF control, time division proportional control) ● Transmission output range can be set arbitrarily within the measurement range ● External input allows linkage with a cleaning device ● Compatible with five types of temperature compensation elements ● Automatic judgment of electrode characteristics 【P-2100 Field Type】 ● AC 85-240V free power supply ● DC 4-20mA transmission output, 2-point alarm output included ● Output hold function during maintenance ● Measurement value shift function included ● Electrode electromotive force and output relay check function included ● Hysteresis setting function and averaging function included ● Temperature measurement display function included ● Cleaning device drive/setting function included (limited to specified products) ● Can be mounted on a pole stand 【P-505SH Panel Mount Type】 ● Easy-to-understand analog display ● Alarm settings use an easy-to-handle meter relay system with upper and lower limit contacts

• Other measuring instruments

This catalog features a wide range of "Smooth Flow Pumps" from Takumina Co., Ltd. We offer a lineup suitable for process lines that require precise control, including "TPL Hydraulic," as well as "APL/APLS Direct" and "XPL Direct," which are ideal for optical films, IT, and high-purity pharmaceuticals. [Contents] ■ Ideal form of fluid transfer ■ Features ■ Product lineup ■ Other Smooth Flow Pumps *For more details, please refer to the PDF document or feel free to contact us.

• pump

The Takumina precision pump offers the "Smooth Flow Pump," a problem-solving pump that resolves all issues and complaints related to pumps, from research and development to process lines! This product is a pump that can continuously deliver precise liquid at the μL scale. Flow rate can be adjusted freely within the range of 5 to 5000 μL/min. There is no liquid leakage or contact with outside air, allowing for the transfer of strong acids, strong alkalis, and substances that cannot come into contact with water. Its compact size makes it easy to install anywhere. It boasts excellent flow accuracy and reproducibility, providing stable liquid delivery with a continuous flow that has no pulsation. 【Features】 ■ Excellent flow accuracy and reproducibility ■ Stable liquid delivery with a continuous flow that has no pulsation ■ Freely adjustable flow rate within the range of 5 to 5000 μL/min ■ Maximum discharge pressure of 3 MPa ■ No liquid leakage or contact with outside air (capable of transferring strong acids, strong alkalis, and substances that cannot come into contact with water) ■ Flow rate does not decrease even with long-term use *For more details, please refer to the PDF document or feel free to contact us.

• Unit Products

This pump achieves a maximum flow rate of 18㎥/h (300L/h) for high-volume transfer. 【Features】 ■ Wear-resistant contamination-free structure There are no rotating or sliding parts in the wetted area, making it resistant to wear. There is no concern about wear particles contaminating the liquid. ■ Sealed structure with no liquid leakage There is no shaft seal, so there is no worry about liquid leakage or foreign matter contamination. ■ High-volume transfer Flow rate can be adjusted from 15L/min. It excels in linearity and reproducibility, accurately transferring the set flow rate in a continuous stable flow. ■ Compatible with high-viscosity liquids It can stably transfer high-viscosity liquids up to 5000mPa·s. ■ Supports high lift With a built-in check mechanism, it maintains flow even under pressure conditions. The absence of pulsation also reduces pressure loss in the piping. ■ Continuous stable flow without pulsation The mechanism eliminates pulsation, making air chambers or accumulators unnecessary. ■ Easy maintenance The wetted parts are relatively small and can be easily disassembled and assembled by the customer. The long lifespan of parts reduces maintenance frequency and costs. ■ Sanitary specifications available For processes that prioritize cleanability, such as pharmaceuticals, food, and electronic materials, sanitary specifications are available. *For more details, please feel free to contact us.

• Unit Products

The "PR1" is a paperless pH indicator and recorder that integrates a pH meter and a recorder. It features easy operation via a touch panel. It can record pH (ORP) measurement values and temperature. Additionally, with Ethernet compatibility, it supports FTP server, HTTP server, SNTP client, and Modbus TCP functions. 【Features】 ■ Integrated pH meter and recorder ■ Easy operation with a touch panel ■ Capable of recording pH (ORP) measurement values and temperature ■ SD memory card & built-in memory ■ PC support software included as standard ■ Ethernet compatible *For more details, please refer to the PDF document or feel free to contact us.

• Water quality/pH measuring device

We have established the Fluid Solution Center (LABII) and introduced equipment capable of detailed fluid analysis, enabling us to make more suitable proposals. We conduct fluid analysis from various perspectives to resolve troubles and alleviate concerns related to fluid transfer. Utilizing our accumulated knowledge, experience, and know-how, we propose optimization for the entire fluid system based on the results. Please feel free to consult us about any liquid, including slurry, high-viscosity liquids, and easily altered liquids. We have proposals that only a specialized manufacturer can offer. 【Proposal of Solutions and Delivery Process】 ■ Fluid Consulting - Actual liquid confirmation → On-site evaluation → Process condition confirmation → Customer review → Solution proposal ■ Product Provision - Design → Manufacturing → Delivery *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

The "Mekkin Pack TCM Series" is an automatic chlorine injection device that automatically controls residual chlorine through a circulation method. It continuously monitors and controls the target residual chlorine concentration regardless of the water tank capacity or water usage. Its space-saving design makes installation easy. By injecting residual chlorine through precise measurement, it prevents excessive injection and reduces chlorine odor. 【Features】 ■ Continuously monitors and controls the target residual chlorine concentration regardless of water tank capacity or water usage ■ Prevents excessive injection and reduces chlorine odor through precise measurement of residual chlorine injection ■ Easy installation with a space-saving design ■ Eco-friendly design with no wastewater *For more details, please refer to the PDF document or feel free to contact us.

• Water treatment technology and systems

This document is a product guide for food factories. We propose suitable solutions for various scenarios in food and beverage factories, including reliable sanitary process pumps that prevent foreign matter contamination, liquid quality changes, and leaks, as well as pumps and equipment for water supply and wastewater treatment, and essential sterilization water generation devices for hygiene management. [Contents] ■ Introduction of case studies ■ Sanitary process pumps and peripheral equipment ■ Hygiene measures and sterilization equipment ■ Water supply and wastewater treatment equipment *For more details, please refer to the PDF document or feel free to contact us.

• Unit Products

The leading company in precision pumps, Takumina, presents the hypochlorite cooling unit "HJ." The "HJ" is a hypochlorite cooling unit that maintains sodium hypochlorite at a temperature below 20°C, minimizing the generation of chlorate, using cold water supplied from a chiller. It features a simple design and low cost. Furthermore, by combining it with Takumina's gas lock prevention structure GLX or metering pumps, reliable injection of sodium hypochlorite is achieved. 【Main Features】 ■ Temperature management of hypochlorite suppresses the generation of chlorate ■ Simple design and low cost ■ Achieves more reliable hypochlorite injection when combined with Takumina pumps For more details, please refer to the catalog.

• Unit Products

This catalog introduces the "Smooth Flow System," an ideally designed fluid control system that takes various elements into consideration and is meticulously crafted. It includes information on system configuration, features such as the mounted pump, introductions to features and rental equipment, and examples of supply system deliveries. Takumina responds to your various fluid transfer and mixing needs with unique technology and flexible ideas. [Contents] - System configuration - Features: About the mounted pump - Introduction of features and rental equipment - Examples of supply system deliveries - Examples of mixing system deliveries *For more details, please refer to the PDF document or feel free to contact us.

• Unit Products

The leading company in precision pumps, Takumina, presents the polymer coagulant dissolution unit 'JG'. The 'JG Series' is a unit that automatically and continuously dissolves polymer coagulants such as coagulant aids for wastewater treatment and sludge dewatering aids. By controlling the water level in the dissolution tank, it is possible to continuously supply the dissolved solution from a single tank. The materials used are highly durable, allowing for long-term use. 【Features】 ■ From manual to automation This is a polymer coagulant dissolution unit for wastewater treatment, including for dewatering, coagulation sedimentation, and pressure flotation. ■ Simple design & low cost Polymer coagulants can be easily fed into the hopper for automatic dissolution. Changing the concentration requires just one timer! The simple structure of the powder feeding mechanism makes maintenance easy and allows for quick responses to any potential issues. ■ No dry air required Thanks to the mechanical seal structure, there is no need for dry air supply, and it has sufficient moisture resistance. ■ Excellent durability The materials used are highly durable, allowing for long-term use. For more details, please refer to the catalog.

• Water treatment technology and systems

Do you have any of these concerns? We have been receiving many inquiries from those who are troubled by failures in pump selection. "Flow is unstable" "Flow decreases" "Liquid leaks" "Liquid deteriorates" "Foreign substances mix into the liquid" "Additional costs arise later" We explain the causes of these problems in an easy-to-understand manga format. While learning about trouble cases caused by selection mistakes and their countermeasures, you can also learn tips for choosing pumps. Positive displacement pumps are used for a wide range of applications such as transfer, addition, mixing, spraying, and coating. Proper pump selection is crucial as it leads to automation and labor reduction in processes and improves product quality. Gear pumps, screw pumps, and diaphragm pumps each have their own advantages and disadvantages, and the performance of the pump can significantly affect product quality and the stability of the production line; you can acquire this knowledge in this book. The content is also useful for training young employees, so please make the most of it. *For more details, please refer to the "PDF Download."

• others

The Takumina precision pump offers the problem-solving pump "Smooth Flow Pump," which resolves all pump-related issues and complaints from research and development to process lines at once! The "VPL Series" is a Smooth Flow Pump that can handle high-viscosity liquids exceeding 300,000 mPa·s. It can transfer a wide range of liquids, from water-like fluids to paste-like high-viscosity liquids. With no rotating or sliding parts in the wetted area, it has a structure that is resistant to wear. Additionally, there is no shaft seal, eliminating concerns about liquid leakage or foreign matter contamination. 【Features】 ■ Does not damage the transferred liquid ■ Contamination-free ■ Resistant to wear ■ Easy disassembly and assembly 【Other Features】 ■ Does not stir the liquid or apply localized pressure ■ No shaft seal, so there are no worries about liquid leakage or foreign matter contamination ■ No rotating or sliding parts in the wetted area, making it resistant to wear ■ Compact design in the wetted area prevents wasting valuable liquids ■ No sliding parts, eliminating concerns about heat generation or failure due to dry running ■ Can be disassembled without special tools, and residual liquid can be easily wiped away For those considering implementation, we also accept requests for liquid tests and rental units. Please feel free to contact us first.

• pump

The precision pump "Smooth Flow Pump" provided by Takumina solves all pump-related issues and complaints from research and development to process lines! The "Q Series" is a new mechanism precision pump for micro-dosing that combines the ease of use of a tube pump with the liquid delivery accuracy of a syringe pump. It allows for long-term continuous liquid delivery without a decrease in flow rate over time, unlike tube pumps. <User Feedback> "No need to monitor or adjust the flow rate!" "I was able to conduct long experiments continuously!" "The delivery conditions remained unchanged, and I obtained highly reliable data!" <Main Features> ■ Excellent metering and responsiveness ■ Consistent delivery accuracy over long periods ■ Continuous steady flow without pulsation ■ No leakage or alteration of the liquid ■ Resistant to pipe blockage and dry running ■ Easy to scale up ■ User-oriented simple design ■ Compatible with a wide range of chemicals Flow rate setting, calibration, disassembly and assembly, liquid replacement, and portability are all easy! We also offer types compatible with suspensions (slurries) and autoclave sterilization.

• pump