アイ・ティー・エス・ジャパン List of Products and Services

From design, material procurement, processing, assembly, testing, to quality inspection, our trained specialized staff produce "high-quality" products daily with advanced work skills. Therefore, we can deliver products to our clients quickly and without downtime.

• Biomass power generation facilities

This document contains professional viscosity measurements (regarding viscosity and flowability predictions) that stabilize molding. It provides information on "Melt Indexer (MFR)" which explains viscosity, and "Capillary Rheometer" which illustrates viscosity curves. The material is presented in an easy-to-understand lecture format, so please take a moment to read it. 【Contents (excerpt)】 ■ What is simulation software? ■ What can be understood from "viscosity" and "flowability predictions"? ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Moncon Communicator" is a device control and communication module with real-time signal conversion capabilities for the 3000 series rheometers. It is fully customizable due to its various equipped options. It has a built-in calibration function, allowing for easy calibration of testing equipment such as the MDR3000 and V-MV3000 while checking graphics. 【Features】 ■ Real-time signal conversion capabilities for the 3000 series rheometers ■ Fully customizable due to various equipped options ■ Built-in calibration function ■ Easy calibration of testing equipment such as the MDR3000 and V-MV3000 while checking graphics *For more details, please refer to the related links or feel free to contact us.

• Other Software

"MonControl" is an analytical software specifically designed for rheometers and Mooney viscometers. While it has a wealth of features, it also possesses user-friendly ease, allowing for combinations with all commercially available rheometers and viscometers. Additionally, the usage is very simple, enabling users to easily "configure" tests and perform "combinations." 【Features】 ■ Easy-to-understand virtual structure with modular configuration ■ Test configuration system with version management functionality ■ Over 3,000 types of testing functions ■ Automatic calibration of testing equipment ■ Optimization features tailored to the user *For more details, please refer to the related links or feel free to contact us.

• Other Software

The "Disparcool 3000" is a device that cools materials that are difficult to cut, such as uncured rubber, below their glass transition temperature, making them easier to cut. It is specially designed for creating samples suitable for dispersion testing and utilizes Montec's proprietary technology. This product is environmentally friendly as it does not use consumables like liquid nitrogen. 【Features】 ■ Cools difficult-to-cut materials, such as uncured rubber, below their glass transition temperature ■ Specially designed for creating samples suitable for dispersion testing ■ Cooling time is typically around 5 to 12 minutes, with settings adjustable based on the type and shape of the sample ■ Environmentally friendly product that does not use consumables like liquid nitrogen *For more details, please refer to the related links or feel free to contact us.

• others

The "AO3000" is an aging oven designed to create samples for testing the plasticity of rubber based on international standard specifications. It is used in conjunction with the plasticity meter RP3000 to measure the plasticity residual index (PRI) of natural rubber. Four pull-out trays are equipped with four aluminum cups each, on which samples are placed for use. The heat source is designed to cover the interior of the heating chamber, minimizing thermal damage through high-precision temperature control. 【Features】 ■ Creates samples for testing the plasticity of rubber ■ Used in conjunction with the plasticity meter RP3000 ■ Measures the plasticity residual index (PRI) of natural rubber ■ Exterior made of robust stainless steel ■ Heat source designed to cover the interior of the heating chamber *For more details, please refer to the related links or feel free to contact us.

• others

The "Fully Automatic QC System" automates all the tasks involved in quality inspection that are currently performed manually by operators, such as "bringing samples," "cutting out," "loading into the device," and "starting the tests." The movement of samples within the cell is also handled by robots, so no manual work from operators is required. Of course, after the tests are completed, the discharge of samples from the cell is also done automatically. 【Features】 ■ Compatible with various inspection equipment from Montec ■ Customizable combinations to meet customer needs ■ Manufactured as custom-made units tailored to each site ■ Capable of fully automating quality inspections ■ Already has over 60 lines of achievements worldwide *For more details, please refer to the related links or feel free to contact us.

• others

Montec's rheometer can be equipped with an "auto sampler" for automatic measurement. It is capable of performing a series of tasks automatically, including "sample placement," "automatic film transfer," and "automatic sample discharge after measurement." We offer two versions: a linear type and a tray rotation type, which can be selected according to the desired number of measurement points. 【Features】 ■ Automatic transport of samples to the rheometer ■ Compatible with all Montec rheometers ■ Automatically performs the entire series of tasks: "sample placement," "automatic film transfer," and "automatic sample discharge after measurement" ■ Available in two versions: linear type and tray rotation type ■ Selectable according to the desired number of measurement points *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

The "CS 3000" is a jig set designed to easily and accurately measure compression set as specified by global standards such as ISO 815, DIN 53517, and ASTM D395. Rubber samples are compressed between two parallel plates for a specified time and at a specified temperature, after which they can no longer recover their thickness. This is the compression set test. Distance plates and other components can be ordered in custom specifications. 【Features】 ■ Easy and accurate measurement of compression set as specified by global standards such as ISO 815, DIN 53517, and ASTM D395 ■ Custom specifications available for distance plates and other components *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

The "RP 3000" is a device for measuring the plasticity and viscosity of polymers and unvulcanized rubber. The measurement method is simple, quick, and hygienic. Additionally, by using it in conjunction with Montec's "Aging Oven (AO3000)," it is also possible to measure the plasticity residual index (PRI) of natural rubber. You can freely program the conditions and required time, making it easy to read the characteristics of the flow behavior of natural and synthetic rubber under various measurement conditions. 【Features】 ■ Measures the plasticity and viscosity of polymers and unvulcanized rubber ■ Conditions and required time can be freely programmed ■ Data compatible with Mooney viscosity can also be obtained ■ Comes with a dedicated sample cutter that can create a 0.40 cm³ sample ■ Standard platens with diameters of 10 mm, 7.3 mm, and 14 mm are included *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

The "CC 3000" was developed to evaluate the service performance of industrial rubber products, such as solid tires for industrial use and conveyor belts that transport sharp objects like rocks, gravel, glass, and metal. In addition to being "fast" and having "low running costs," it is equipped with a reliable high-level standard in inspections that predict actual product performance. A circular sample placed on a rotating axis is subjected to an impact controlled precisely in terms of frequency and cutting time using a sharp tungsten carbide knife for measurement. 【Features】 ■ Fast ■ Low running costs ■ Reliable in inspections that predict actual product performance ■ Measurement through impacts controlled precisely in terms of frequency and cutting time ■ Once the pre-set measurement time is completed, a cylinder automatically lifts the knife's auxiliary arm *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "ABR 3000" is a device that allows for easy and accurate execution of wear tests without errors, using the Montec rotary drum wear testing machine. The test sample is secured in a quick-clamp sample holder and is pressed against a sheet of abrasive wrapped around a rotating drum at a specified distance and load, with the option to rotate. The friction loss coefficient is calculated by comparing the weight of the test sample before and after the test. 【Specifications (excerpt)】 ■ Abrasive cloth size: 472.5mm (+2) × 400mm ■ Film tape size: 50mm × 0.2mm ■ Wear distance: 40m (20m) ■ Abrasive cloth grit: 60 mesh ■ Maximum grip length: 16mm *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "RB3000" is a pendulum-type automatic elasticity tester that measures the rebound elasticity of rubber and elastomer materials. It measures the rebound elasticity from the "return energy" and "impact energy" that occur between the "hammer fin," "sample," and "RB3000." The test samples that can be measured are rubber or elastomer materials, in the form of button-type or small pieces, with a hardness range of 30 to 85 (shore A [IRHD N]). 【Features】 ■ A rebound tester that accurately measures the rebound force of rubber compounds ■ Easy operation with a 7-inch multi-touch screen ■ The pendulum has a hammer fin with a diameter of 15mm ■ Measures rebound elasticity from return energy and impact energy ■ Test samples that can be measured: rubber or elastomer materials *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "FT3000" is a linear drive-type durability and fatigue testing machine that has the capability to measure both "fatigue due to stretching" and "cracking due to bending." It is designed for continuous research and development as well as quality control, allowing for the simultaneous measurement of 16 samples under a precisely controlled temperature environment. Frequency, grip distance, and dynamic stroke can be freely set. 【Features】 ■ Achieves both stretching fatigue and bending fatigue (De-Mattia) testing with a single machine ■ Can accommodate a total of 16 samples on a stainless steel grip for simultaneous measurement ■ Measurement in a highly accurate temperature environment ■ Utilizes a digital control panel ■ Adjustable cycle settings *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "HT3000CH" is a hardness testing machine that measures changes in rubber hardness under extreme conditions ranging from -40°C (with an option for -70°C) to 180°C. It is equipped with an auto sampler, allowing for automatic, rapid, and efficient measurements. Additionally, a humidity control system can be added as an option. All test sequences are conducted according to the software's guided sequence. 【Features】 ■ Equipped with an auto sampler ■ Capable of both fully automatic and manual measurements ・Can set up to 25 samples on a rotating tray ・Measurement process precisely controlled by a control program ■ All data during measurement is automatically saved to a database *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "HT 3000" is a device that accurately measures hardness, one of the important physical properties of rubber products and components. It features a new design with a digital display that is easy for anyone to read. With automation through the "automatic sample loader" and various options such as the "positioning device," it meets a wide range of customer needs. Additionally, there is a modular exchangeable version called the "HT3000 Modular," so please feel free to contact us when needed. 【Product Range】 ■HT 3000-A: Digital handheld Shore A durometer ■HT 3000-D: Digital handheld Shore D durometer ■HT 3000-S: Low-pressure holding base, with weights for durometer calibration ■HT 3000-SA: Automatic hardness testing holding base *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "DM 3000" is a density testing machine equipped with a semi-automated test sequence and an automatic calibration system. This compact device is designed for rapid and accurate density and specific gravity measurements, capable of performing up to four measurements per minute under software control. It uses the buoyancy weighing method to compare the weight of samples in air and submerged in water. Measurements can be taken even for densities lower than 0.50–10.00 g/cm³ by using optional anti-float brackets or needle holders. 【Specifications (excerpt)】 ■ Measurement data: Density, specific gravity, volume change ■ Measurement range: 0.0–420 g (0.0–160 g) ■ Sample weight: 1.000–50.000 g ■ Reproducibility: ±0.020% or less ■ Power specifications ・Single-phase: 100V - 260V, rated: 2A 50/60Hz *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "Disper Tester 3000 Plus" is a fully automatic filler dispersion testing machine for rubber. The autofocus function automatically adjusts the focus for sample imaging. Since the adjustment of the shooting location is done internally within the device, there is no need to move the sample's position. A dedicated auto-sampler is available for purchase separately, capable of holding 50 samples. 【Specifications (excerpt)】 ■ Magnification: 100x ■ Aperture: 12mm x 3.5mm ■ Particle size: 1μm to 250μm ■ Light source: LED light ■ Interface: USB 3.0 *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

Development focused on manufacturing equipment for green hydrogen and biomethane. Please feel free to consult us about cutting-edge engineering.

• others

The "X-treem AIR VALVE" series of valves for oxygen tanks during firefighting activities features a practical design that takes into account operability when wearing thick fireproof gloves and includes ergonomic anti-rolling handwheels, among other considerations for real-world scenarios. It is supported worldwide for its ease of use even in extreme conditions.

• others

The "i-One Touch" remote management valve specifically designed for medical use. The new product "i-One Touch" from the medical valve brand "Biproxy" by Cabanya is a valve for oxygen cylinders that integrates an opening and closing valve with a flow control valve, equipped with communication functions for remote management. The status and location information of the oxygen cylinder can be monitored in real-time via networks such as the Internet, wireless LAN, and Bluetooth using smartphones, tablets, or PCs. Customers can either prepare the cloud platform for building the remote management system themselves or we can propose one. Additionally, for customers who wish to utilize the system immediately, Cabanya's IoT remote management system "Otus" is also available. We will be exhibiting at the "Hospital Expo" held at Makuhari Messe from October 11 (Wednesday) to October 13 (Friday), 2023. Please be sure to stop by our booth "16-9."

• Biomass power generation facilities

◎Medical gas cylinder valve ◎Gas meter ◎Cylinder bundle ◎LP gas

• Biomass power generation facilities

The "QC-701A" is a color matching cabinet manufactured by Comtec. Color judgment varies under different lighting environments, and this product provides commonly used lighting conditions such as D65 standard daylight, UV fluorescent reaction light, and A sunset light. Additionally, it has a device that records the usage time of each light source, allowing for an estimation of the lamp's lifespan. 【Features】 ■ Simulates various lighting conditions ■ Provides an objective standard environment for sample color comparison ■ Predicts the lifespan of the lamps ■ The cabinet is painted gray ■ Comes with a diffuser cover for uniform light distribution without concentrated light spots *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-337 is a Elmendorf-type tear strength testing machine that measures the strength at the beginning of tearing for materials such as paper, textiles, and PVC. After fixing the test specimen, a knife is used to make a cut in the specimen, and the specimen is torn using the energy from the swinging pendulum. The tear strength is calculated from the change in position of the indicated pointer and is displayed on the dial. 【Specifications】 ■ Test specimen dimensions: 63.5 × 100 mm ■ Capacity: 20–3200g / 0–6400g (switchable), weights included ■ Main unit dimensions: 47 × 25 × 38 cm ■ Weight: 25kg *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

We handle the D-type durometer 'GS-702N' from Comtech. By applying a specified load to a standard material plane and reading the values on the display, we evaluate the material hardness. It is suitable for testing soft materials such as non-metals. The required area and thickness of the test specimen vary depending on the hardness of the material, so it is necessary to conduct approximately 5-10 measurements to obtain accurate material hardness. 【Specifications】 ■ TYPE: D-type ■ Applicable materials: Plastic (hard) A value > 90 or higher ■ Accuracy: ±1 degree ■ Indenter shape: Needle tip R0.1mm 30° conical ■ Measurement range (test specimen): 6mm or more ■ Constant pressure load platform weight: 5kg *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

We would like to introduce the C-type durometer 'GS-701N', which is suitable for soft materials and is handheld. By applying a specified load to the flat surface of the sample, the value displayed on the dial is read as the material hardness. Since samples with different hardness have varying area and thickness conditions, it is necessary to measure the average value from 5 to 10 readings as the material hardness. 【Specifications】 ■ TYPE: C-type ■ Applicable material: Foam (PU) ■ Accuracy: ±1 degree ■ Indenter shape: Φ5.08mm semicircular ■ Measurement range (specimen): 10mm or more ■ Constant pressure load platform weight: 1kg *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-GSA" is a constant pressure loading platform that provides precise loads for accurate and reproducible hardness measurements. It reads the maximum value indicated immediately after the sample makes contact with the pressure surface of the durometer, and that value represents "hardness." The average value from five locations is used as the hardness measurement, and the thickness of the test piece and measurement positions comply with the standards of each durometer. 【Specifications (partial)】 ■ Load range: 1kg, 5kg (1kg + 4kg) ■ Measurement schedule: 170mm ■ Main body dimensions: 18×20×42cm ■ Weight: 18kg ■ Mounting tooth tip type: M6x5mm (or specified) ■ Test table diameter: Φ770mm *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-643B is a rigidity testing machine designed to measure and evaluate materials such as hard, thin, and small sheets (e.g., brush bristles, flexible plates). It measures the load through the reaction force of bent bristles, and this product allows for the test specimen's length to be set at distances of 1, 5, 10, 15, 20, 25, and 50 mm, with testing conducted at angle conditions of 1-90 degrees. Different distances and angles can be selected based on the test specimen, and the maximum load after bending is determined. 【Specifications (partial)】 ■ Test capacity: Maximum 500g ■ Measurement angle: Adjustable from 1-90° ■ Measurement lengths: 1, 5, 10, 15, 20, 25, 50mm ■ Speed rate: 5° to 100° / sec ±5% (adjustable) ■ Accessories: Software cable *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-317M/N" is a manual waterproof testing machine that does not require a power supply for testing. By continuously pressing and releasing the air inflating ball, pressure is applied to the pressurization seat, maintaining a pressurization speed of 1 kg/cm²/min. When water leaks from three points on the back side of the test specimen, the pressurization is stopped, and the value on the pressure gauge is recorded. We observe whether water leaks out after applying a constant water pressure for a certain period of time. 【Specifications (partial)】 ■ Test specimen dimensions: 12×12 cm ■ Pressurization surface diameter: 9.4 cm ■ Test specimen clamping: Manual grip ■ Body dimensions: 35×20×32 cm (W×D×H) ■ Weight: 5.9 kg *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-317F" is an electronic waterproof testing machine that can perform measurements in both dynamic and static forms. The maximum measurement pressure can be adjusted within the range of 4.5 kgf/cm² and 0.05 to 4.5 kgf/cm²/min, satisfying various testing standards. Additionally, it is equipped with a 7-inch monitor (touch panel), high-precision pressure sensors, and a pressure controller system. Measurements are stable and highly accurate, with the measurement process displayed in real-time on a pressure-time graph, allowing for the confirmation of pressurization speed and immediate pressure status. 【Features】 ■ Satisfies various testing standards ■ Real-time water temperature display and pressure graph display ■ Multiple measurement methods with the possibility to set three-stage conditions ■ Expanded measurement space capable of measuring fabric for a single garment ■ Safety stop device that automatically reduces pressure when the test specimen bursts *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-309E is a manual twisting machine that automatically detects the length of the test specimen and the twist level of the spun yarn, displaying the information on the screen. After twisting the spun yarn, it measures the twist level based on the length condition, indicating differences in characteristics and measuring changes in twist through sensors. Additionally, when conducting tests on high twist level specimens, the measurement speed decreases before the test ends, allowing for more accurate detection. 【Features】 ■ Measures twist level based on changes in spinning ■ Built-in reference table for tensile force data and test loads for various wires ■ Automatically detects the length of the test specimen and the twist level of the spun yarn, displaying it on the screen ■ Allows users to better understand the progress of the test ■ Capable of analyzing test data and providing test results *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-317A is a pressure-type waterproof testing machine that allows for the setting of clamping pressure. It applies pressure to waterproof textile products at a constant rate, and the pressure at which water seeps out from three points on the back of the test specimen is the waterproof rating. The testing methods are divided into three types: water pressure method, constant water pressure method, and leakage method. Please feel free to contact us when you need assistance. 【Testing Methods (Partial)】 ■ Water Pressure Method - Raise the water level at a speed of 1 cm/sec. - Record the water level height until water seeps out from three points on the back of the test specimen. ■ Constant Water Pressure Method - Raise the water level to a constant height and leave it. - Record the time until water seeps out from three points on the back of the test specimen. *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-309D" is an electric twisting machine that automatically detects the length of the test specimen and the twist level of the spun yarn, displaying this information on the screen. After twisting the spun yarn, it measures the twist level based on the differences in characteristics according to the length, using display indicators and sensors to detect changes in the spinning. Additionally, when conducting tests on high twist level specimens, the measurement speed decreases before the end of the test, allowing for more accurate detection. 【Features】 ■ Measures twist level based on changes in spinning ■ Built-in reference table for tensile force data and test loads for various wires ■ Automatically detects and displays the length of the test specimen and the twist level of the spun yarn on the screen ■ Allows users to better understand the progress of the test ■ Capable of analyzing test data and providing test results *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-302A" is an electric measuring device that rotates a winding frame to take a certain number of rotations and length of thread. It measures the reel's tensile strength and weighs it on a scale to determine the yarn count or tex. It can wind 6 threads at a rotation speed of 30 to 300 r/min. This product complies with testing standards ASTM D1059/D1907/D2260, ISO 7211/2060, and BS 2010. 【Specifications (partial)】 ■ Number of winding threads: 6 ■ Rotation speed: 30–300 r/min ■ Winding frame circumference: 1 meter/revolution (optional specification of 1.5 yards/revolution available) ■ Counter: 5–9,999 revolutions ■ Body dimensions: 75 × 68 × 50 cm ■ Weight: 55 kg *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-301 is a manual measuring device that measures the tensile strength of reels and weighs the weight on a scale to measure the yarn count or tex. It operates at a speed of 30 to 300 RPM, either manually or electrically. It rotates the winding frame to take a certain number of rotations and a specified length of thread. It complies with testing standards such as ASTM D1059, ASTM D2260, ISO 7211, ISO 2060, and BS 2010. 【Specifications (partial)】 ■ Number of threads wound: 4 ■ Rotation speed: Manual control ■ Winding frame circumference: 1m/revolution or 1.5 yd/revolution ■ Counter: Capable of reading 0 to 9,999 revolutions ■ Body dimensions: 80 × 43 × 65 cm *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The QC-116 is an electronic Mullen burst testing machine that measures the burst strength of materials such as paper, cardboard, leather, textiles, and synthetic leather. Equipped with a monitor (touch panel), it allows for the calculation of error compensation values. It can adjust the calibration parameters of the sensing components, improving measurement accuracy. Additionally, it features a load graph function that enables immediate reading of test conditions, and it allows for unit switching, making it easier to interpret test results. 【Features】 ■ Equipped with a monitor (touch panel) ■ Adjustable calibration parameters for sensing components ■ Load graph function included ■ Unit switching available (international units or imperial units) ■ Measures burst strength of materials such as paper, cardboard, leather, textiles, and synthetic leather *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-659H" is a bending test machine for cables used in electrical products. It evaluates the bending performance of cables based on the number of bends until the copper wire inside the cable becomes an open circuit due to excessive bending. This machine is equipped with a monitor (touch panel color), as well as features for stopping after a set number of bends, stopping on breakage, temporary stop function, and emergency stop function. 【Features】 ■ Operated via touch panel, improving ease of use ■ Switchable between English and Chinese ■ Immediate display of the machine's operating status, including during measurement, stop, and measurement results ■ Equipped with a timer, capable of automatically calculating measurement time ■ Configurable stop function after a set number of bends, up to a maximum of 99,999,999 bends ■ Ability to set the speed of digital testing, with a speed range configurable from 10 to 100 CPM *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-104H" is a fatigue testing machine designed to evaluate the bending and flexural strength of materials such as paper, resin films, aluminum foil, copper foil, and flexible printed circuit boards. Samples are typically bent repeatedly between +135° and -135°, and the bending resistance is assessed based on the number of cycles until breakage occurs. Test conditions such as the number of bends and speed are input via the 5-inch touchscreen of the device. Additionally, the testing machine automatically stops when a sample break is detected or when the set number of test cycles is completed. 【Specifications (partial)】 ■ Load capacity: up to 50kg (varies depending on test stroke) ■ Stroke: up to 160mm ■ Sample length: up to 180mm ■ Number of test samples: up to 5 ■ Test speed: 20–500 r.p.m. *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

The "QC-662B" is a Vicat softening point tester that supports simultaneous measurement of up to 3 samples and displays the deflection amount and temperature of each sample during measurement. A probe with a tip area of 1mm² is placed at the center of the sample under a constant load of 10N (or 50N), and the sample is heated at a constant rate of 50°C per hour in a liquid heating bath. The Vicat softening temperature (VST) is recorded when the probe has sunk 1mm. Operation is performed via a touch panel, and since the operating procedures are standardized, measurements can be easily started with step-by-step operations. 【Features】 ■ 7-inch touch screen: Displays measurement data for up to 3 samples ■ Data output in Excel format ■ User-friendly interface: Easy operation with step-by-step format ■ Measurement of load deflection temperature through interchangeable fixtures *For more details, please refer to the related links or feel free to contact us.

• Measurement and Analysis Equipment

This document provides information on how to choose a universal testing machine from Comtec, a comprehensive manufacturer of physical property measurement testing machines. For "load," you can choose from five types such as "500N" or "2kN to 5kN." Additionally, there are models available with height variations to suit the application of the tests. Please feel free to download and take a look. 【Contents (partial)】 ■ Load ■ Testing (jigs) ■ Software ■ Options *For more details, please refer to the PDF document or feel free to contact us.

• others

The GS-709N is a handheld durometer suitable for testing soft materials such as non-metals. It is an A-type durometer. A specified load is applied to a standard material surface, and the value on the display is read to evaluate the material hardness. The required area and thickness of the test specimen vary depending on the hardness of the material. To obtain accurate material hardness, it is necessary to perform approximately 5-10 measurements. 【Applicable Testing Standards】 ■JIS K7215-1992 ■ASTM D2240 ■ISO 868 ■DIN 53505 *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

The QC-638 is a vertical rebound elasticity testing machine that evaluates the elasticity of rubber by dropping a weight vertically. A weight of 28g is fixed at a height of 400mm and dropped freely to create an impact. The average rebound height from the 4th, 5th, and 6th drops is calculated to determine the elasticity of the rubber. The dimensions of the main unit are 24×16×48cm, and it weighs 8kg. Please feel free to contact us if you have any inquiries. 【Applicable Testing Standards】 ■ASTM D2632 *For more details, please refer to the related links or feel free to contact us.

• others

The "QC-GF-300" is a specific gravity balance that records the mass (weight) of a sample placed on a weighing dish above a specific gravity dish in air. By measuring the mass (weight) in a liquid and using the built-in program in the software for automatic calculations, the density can be displayed, and the shape of the sample is not limited. Measurements of metallic materials can primarily assess the purity of precious metals or the bonding state of powdered materials. It can also evaluate the volume of polymer materials such as plastics and their formulations for use. 【Applicable Test Standards】 ■ASTM D792-93 ■ISO 2481 *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

The QC-117 is an electric static friction tester equipped with constant speed angle increase and automatic stop functions. The measurement method involves fixing the test specimen to the testing platform, taking another measuring object (test specimen), and securing it under the specified load according to the standards, then placing it on the testing platform. The angle of the testing platform rises at approximately 1.5 degrees per second until the weights start to slide, and the tangent (tan(θ)) value of the angle at the moment it slides down is calculated, which becomes the static friction coefficient of the test specimen's surface. 【Corresponding Test Standards】 ■ASTM D202 ■TAPPI T815 *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments

We would like to introduce our electric static friction measuring device, the 'QC-117A'. The measurement method involves fixing the test specimen to the testing platform, then taking another measuring object (test specimen), securing it under a specified load as per the standards, and placing it on the testing platform. The angle of the testing platform rises at approximately 1.5 degrees per second until the weight begins to slide, and at the moment it slides down, the tan(θ) value of the angle is determined, which becomes the static friction coefficient of the test specimen's surface. 【Corresponding Test Standards】 ■ASTM D202 ■TAPPI T815 *For more details, please refer to the related links or feel free to contact us.

• Other measuring instruments