エスディエス List of Products and Services

Even if the specifications do not match our standard products, we will hold discussions and create products that satisfy our customers. Please prepare the drawings, and we will manufacture based on those drawings. Feel free to contact us for more details.

• Power distribution and control panels

This is a freestanding control panel box with a center pillar. ■ Material options to suit installation environment You can specify the material from three types: steel "plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," according to the installation environment. ■ Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■ Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (Specifications can be made in 1mm increments based on upper and lower limits. The range may vary by series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge applies) * For specified colors, please provide a separate color sample (painted on iron material). * We also accept painting based on Japan Paint Industry Number, Munsell Number, and RAL Number. Please feel free to contact us for more details.

• Power distribution and control panels

This is a double-door type free-standing control panel box for indoor use. ■ Material selection according to installation environment You can specify the material from three types: steel "plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," depending on the installation environment. ■ Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■ Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (Specifications can be made in 1mm increments based on upper and lower limits. The range may vary by series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge) * If you specify a color, please provide a color sample (painted on iron material). * We also accept painting based on Japanese paint industry numbers, Munsell numbers, and RAL numbers. Please feel free to contact us for more details.

• Power distribution and control panels

This is a self-supporting control panel box for indoor use. ■ Material options to suit installation environment You can specify the material from three types: steel "plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," according to the installation environment. ■ Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■ Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (You can specify in 1mm increments from the upper and lower limits. The range may vary depending on the series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge applies) * If you specify a color, please provide a color sample (painted on iron material). * We also accept painting according to Japan Paint Manufacturers Association number, Munsell number, and RAL number. Please feel free to contact us for more details.

• Power distribution and control panels

This is an outdoor control box suitable for wall mounting or placement on the ground, with a roof. ■ Material selection according to installation environment You can specify the material from three types: steel "sheet metal," "electro-galvanized steel," and "high corrosion-resistant galvanized steel," depending on the installation environment. ■ Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■ Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (Specifications can be made in 1mm increments based on upper and lower limits. The range may vary by series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge applies) * For specified colors, please provide a separate color sample (painted on iron material). * We also accept painting according to Japan Paint Industry number, Munsell number, and RAL number. Please feel free to contact us for more details.

• Power distribution and control panels

This is an indoor control box suitable for both wall-mounted and freestanding installations. ■ Material selection based on installation environment You can specify the material from three types: steel "plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," according to the installation environment. ■ Hole processing included (free of charge) We will process equipment mounting holes on the outer surface of the box (six sides) within the processing range. ■ Custom size production (free of charge) You can change the outer dimensions of the box (width, height, depth). (Specifications can be made in 1mm increments based on upper and lower limits. The range may vary by series.) ■ Custom color painting for factory colors, machine colors, etc. (additional charge applies) * For specified colors, please provide a color sample (painted on iron material). * We also accept painting based on Japan Paint Industry Number, Munsell Number, and RAL Number. Please feel free to contact us for more details.

• Power distribution and control panels

■Selectable materials according to installation environment You can specify the material from three types: steel "steel plate," "electro-galvanized steel plate," and "high corrosion-resistant galvanized steel plate," depending on the installation environment. ■Hole processing included (free of charge) We will perform equipment mounting hole processing on the outer surface of the box (6 sides) within the processing range. ■Custom size manufacturing (free of charge) You can change the outer dimensions of the box (width, height, depth). (You can specify in 1mm increments based on upper and lower limits. The range may vary by series.) ■We also accommodate specified color painting such as factory colors and machine colors (additional charge applies) *For specified colors, please provide a color sample (painted on iron material). *We also accept painting based on Japanese paint industry numbers, Munsell numbers, and RAL numbers. Please feel free to contact us for more details.

• Power distribution and control panels

The dust-proof rack "Mamorukun" is designed to protect information terminal devices such as computers used in harsh environments. By sealing the interior with a unique structure, it safeguards these devices from harmful substances like dust, dirt, and oil mist that float in factory settings. **Features of Mamorukun SF (Small Form Factor)** - A space-saving dust-proof rack with a depth of 350mm. It has a compact size that is half the depth of the popular Mamorukun Standard Series, eliminating unnecessary bulk. - Can be installed snugly against a wall. By attaching heat dissipation equipment to the side, it can be positioned closely against walls. - Knockdown-style upper and lower split structure. Because it is split into upper and lower sections, it can be delivered in parts for installation in locations that require crossing over a mezzanine or other obstacles. For more details, please download the PDF or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• Shelves and racks

"Factory Furniture" is a dustproof case that allows for easy protection of LCD monitors in environments where dust and dirt are present. It can be conveniently used for monitors displaying real-time information such as "production status" and "machine operation status" in production and logistics sites, as well as for factory signage. 【Features of Factory Furniture】 ■ Protects LCD Monitors This is a dustproof case designed for LCD monitors with dustproof functionality. ■ Choose According to Size Available in various sizes to fit PC monitors from approximately 65 inches, with 4 sizes for horizontal installation and 3 sizes for vertical installation. ■ Choose Installation Method Depending on the installation location, you can choose between "stand" and "wall-mounted" options. ■ Reduces Cleaning Frequency Equipped with the same dustproof features as the professional model "Mamorukun," it reduces the frequency of regular cleaning inside the case. For more details, please download the PDF or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• Terminal board/equipment storage rack

The SDS display stand is a Japanese-made display stand manufactured in our own factory. 【Features of the Meeting Design Stand】 ■ Replaceable front design panel The design panel is designed to be replaceable to accommodate changes in office concepts due to dirt from aging or office relocations. ■ Two body colors and five selectable design patterns You can choose the body color of the display stand from two options: black and white. The wood grain design panels are available in five colors: ash gray, brown, dark brown, natural, and orange. ■ Japanese-made TV stand It is manufactured in our own factory located in Ishikawa Prefecture, Japan. We have strict internal standards for process management and product management to ensure thorough control. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please let us know.

• Digital Signage

The SDS display stand is a Japanese-made display stand manufactured in our own factory. 【Features of the Meeting Design Stand】 ■ Replaceable front design panel The design panel is designed to be replaceable to accommodate changes in office concepts due to dirt from aging or office relocations. ■ Two body colors and five selectable design patterns The body color of the display stand is available in two colors: black and white. The wood grain design panels come in five colors: ash gray, brown, dark brown, natural, and orange. ■ Japanese-made TV stand Manufactured in our own factory located in Ishikawa Prefecture, Japan. We have strict internal standards for process management and product management, ensuring thorough control. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• Digital Signage

The SDS display stand is a Japanese-made display stand manufactured in our own factory. 【Features of the Meeting Design Stand】 ■ Replaceable front design panel The design panel can be replaced to accommodate changes in office concepts due to dirt from aging or office relocations. ■ Two body colors and five selectable design patterns The body color of the display stand is available in two colors: black and white. The wood grain design panels come in five colors: ash gray, brown, dark brown, natural, and orange. ■ Japanese-made TV stand Manufactured in our own factory located in Ishikawa, Japan. We have strict internal standards for process management and product management to ensure thorough control. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please let us know.

• Digital Signage

The SDS display stand is a Japanese-made display stand manufactured in our own factory. 【Features of the Meeting Design Stand】 ■ Replaceable front design panel The design panel can be replaced to accommodate changes in office concepts due to dirt from aging or office relocations. ■ Two body colors and five design patterns to choose from The body color of the display stand is available in two colors: black and white. The wood grain design panels come in five colors: ash gray, brown, dark brown, natural, and orange. ■ Japanese-made TV stand It is manufactured in our own factory located in Ishikawa Prefecture, Japan. We have established strict internal standards for process management and product management to ensure thorough control. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• Digital Signage

The SDS display stand is a Japanese-made display stand manufactured in our own factory. 【Features of the Meeting Design Stand】 ■ Front design panel can be replaced The design panel is designed to be replaceable to accommodate changes in office concepts due to dirt from aging or office relocations. ■ Two body colors × five selectable design patterns The body color of the display stand is available in two colors: black and white. The wood grain design panels come in five colors: ash gray, brown, dark brown, natural, and orange. ■ Japanese-made TV stand It is manufactured in our own factory located in Ishikawa Prefecture, Japan. We have established strict internal standards for process management and product management to ensure thorough control. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• Digital Signage

Computers are equipped with cooling fans inside the casing to dissipate heat, but this also causes dust and debris to enter the computer. The accumulation of dust and debris can lead to issues such as poor cooling of the boards, forced shutdowns of the computer, and unusual noises from the fan, all of which can result in malfunctions. <Consultation for Implementation Cases> We have installed computers for inventory management, but the frequency of computer failures due to dust and debris is high. We want to protect them, but what kind of rack would be suitable? We also plan to include printers and other devices along with the computer and monitor. <Solution to the Problem> The dustproof rack "Mamorukun" offers fan type, cooler type, and heat exchanger type options tailored to the installation environment. We will help you select the optimal type based on the devices to be mounted and the site conditions, so please feel free to contact us. We will select the most suitable dustproof rack for your site!

• Terminal board/equipment storage rack

The SDS display stand is designed to be stable and durable, as it undergoes safety testing for all products. 【Features of the Compact Signage Stand】 ■ Easy to Assemble This digital signage stand combines a simple assembly structure with "casters already attached to the base" and the compactness of an easel stand, making it a great choice. It also comes in a compact shipping package: W1160×H165×D540mm (21kg). ■ Tipping Angle It is designed to ensure that the tipping angle in all directions (front, back, left, right) exceeds 15° when the maximum load is applied. It strictly adheres to our unique safety standards based on JIS regulations. ■ Made in Japan TV Stand Manufactured in our own factory located in Ishikawa Prefecture, Japan. We have established strict internal standards for process management and product management to ensure thorough oversight. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• Digital Signage

The S.D.S delivery box for apartment buildings is a delivery box specifically designed for small-scale apartment buildings made in Japan. 【Features of the Delivery Box for Apartment Buildings】 1. A mechanical delivery box with a 4-digit push lock that can be installed in combination. Since it does not use electricity, there is no need for wiring work, which keeps installation costs down, and there are no running costs. Additionally, it eliminates the hassle of dealing with errors, malfunctions, and maintenance that are common with electric delivery boxes. 2. Easy selection There are three types of boxes: super large, semi-large, and semi-large unit, along with a post unit, making selection simple with just a limited number of items. 3. Easy combination The method for connecting boxes is simple; they can be assembled by just screwing them together using the knockout holes located on the top and sides. For more details, please download the PDF or feel free to contact us.

• Other security systems

The SDS delivery box for apartment buildings is a delivery box specifically designed for small-scale apartment buildings made in Japan. 【Features of the Delivery Box for Apartment Buildings】 1. A mechanical delivery box with a 4-digit push lock that can be installed in combination. Since it does not use electricity, there is no need for wiring work, which reduces installation costs, and there are no running costs. Additionally, it eliminates the hassle of dealing with errors, malfunctions, and maintenance that are common with electric delivery boxes. 2. Easy selection There are three types of boxes: super large, semi-large, and semi-large unit, along with a post unit, making selection straightforward due to the limited number of items. 3. Easy combination The method for connecting boxes is simple, using knockout holes on the top and sides to secure them with screws, making assembly easy. For more details, please download the PDF or feel free to contact us.

• Other security systems

The S.D.S delivery box for apartment buildings is a delivery box specifically designed for small-scale apartment buildings made in Japan. 【Features of the Delivery Box for Apartment Buildings】 1. A mechanical delivery box with a 4-digit push lock that can be installed in combination. Since it does not use electricity, there is no need for wiring work, which reduces installation costs, and there are no running costs. Additionally, it eliminates the hassle of dealing with errors or malfunctions that are common with electric delivery boxes, as well as maintenance. 2. Easy selection There are three types of boxes: super large, semi-large, and semi-large unit, along with a post unit. With only a few base items, selection is simple. 3. Easy combination The method for connecting boxes is a simple structure that only requires screwing using the knockout holes located on the top and sides. For more details, please download the PDF or feel free to contact us.

• Other security systems

The SDS delivery box for apartment complexes is a delivery box specifically designed for small-scale apartment buildings made in Japan. 【Features of the Delivery Box for Apartment Complexes】 1. A mechanical delivery box with a 4-digit push lock that can be installed in combination. Since it does not use electricity, there is no need for wiring work, which reduces installation costs, and there are no running costs. Additionally, it eliminates the hassle of dealing with errors, malfunctions, and maintenance that are common with electric delivery boxes. 2. Easy selection There are three types of boxes: super large, semi-large, and semi-large unit, along with a post unit. With only a limited number of base items, selection is straightforward. 3. Easy combination The method for connecting boxes is simple, utilizing knockout holes on the top and sides for easy screw fastening, making assembly straightforward. For more details, please download the PDF or feel free to contact us.

• Other security systems

This is a unit for manually rotating monitors and displays vertically and horizontally. It can be mounted on SDS television stands and digital signage stands. Even with large displays, rotating from vertical to horizontal allows for easy movement without hitting the ceiling. No tools are required, and you can instantly switch the orientation of the display. For more details, please download the PDF or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• Office furniture

In manufacturing sites where cutting machines and lathes that use a large amount of cutting oil are installed, a significant amount of oil mist is generated. Precision equipment such as computers is extremely delicate, and if oil mist infiltrates the interior of the equipment, it can cause various troubles such as short circuits due to adhesion to electronic components and corrosion of metal and resin parts, potentially having a negative impact on the production line. < Consultation for Implementation Cases > There are many machines in the factory that generate oil mist. Due to the influence of this oil mist, the computers installed on-site frequently break down, so we want to protect computers and monitors from oil mist. < Solution to the Problem > In an oil mist environment, it is necessary to seal the racks. By sealing them, it is required to prevent oil mist from entering the racks from the outside. Measures can be taken using either the cooler type or heat exchanger type of Mamoru-kun. We will select the optimal type according to the equipment to be installed and the on-site environment, so please feel free to contact us. We will choose the most suitable dustproof rack for your site!

• Terminal board/equipment storage rack

"Corrosive gases" refer to gases that have the potential to corrode materials, such as hydrogen sulfide, sulfur dioxide, chlorine, and nitrogen oxides. In environments where corrosive gases are present, the deterioration of equipment accelerates due to the effects of the gas. There are many cases of consultation for use in facilities other than paper mills, such as tire factories, wastewater treatment plants, and chemical plants. < Case Study Consultation > We delivered a complete system including a computer to a customer at a paper mill. The site is experiencing the generation of corrosive gases, which is causing corrosion of the computer's board, leading to difficulties. < Problem-Solving Method > The fundamental countermeasure against corrosion is to seal the rack that houses the equipment. However, corrosive gases can still enter through gaps in wiring and the opening and closing of doors, so it is necessary to remove the gas that has entered the rack internally. We will select the optimal type based on the equipment being installed and the environmental conditions of the site, so please feel free to contact us. We will select the most suitable dustproof rack for your site!

• Terminal board/equipment storage rack

The comfortable temperature range for the operation of computers and printers is said to be approximately 10°C to 35°C. Therefore, we utilize dustproof racks to maintain a comfortable temperature above 10°C for computers. This is a common case for use not only in cold warehouses and factories but also in refrigerated and frozen storage. <Consultation for Implementation Cases> We have computers and printers installed in a warehouse that reaches sub-zero temperatures in winter. However, the temperature inside the warehouse is the same as the outside air temperature, resulting in frequent malfunctions of computers, monitors, and printers. Can this be resolved with a dustproof rack? <Solution to the Problem> The dustproof rack is designed to dissipate internal heat, but we also offer heater units for those who wish to warm the interior of the rack. We will select the optimal type according to the equipment to be installed and the environmental conditions of the installation site, so please feel free to contact us. We will select the most suitable dustproof rack for your site!

• Terminal board/equipment storage rack

Using a computer in a high-temperature environment can lead to issues such as the monitor screen turning blue, slower processing speeds, or frequent errors like forced shutdowns. <Consultation for Implementation Cases> We plan to install computers in a manufacturing site where temperatures are high and dust is prevalent during the summer. The temperature inside the factory can reach nearly 40°C, raising concerns about computer malfunctions due to overheating. <Solution to the Problem> The installation location for the customer we consulted is a manufacturing site where temperatures can rise to around 40°C. Since the allowable ambient temperature range for fan-type systems may be exceeded, the only viable option is a cooler type. We will select the optimal type based on the equipment to be installed and the environmental conditions of the site, so please feel free to contact us. We will select the most suitable dustproof rack for your site!

• Terminal board/equipment storage rack

The "Wall-Mounted Plus Wide" is a wall mount with a storage unit for STBs (Set-Top Boxes). You won't have to worry about where to place communication devices and peripherals like STBs, and its slim design allows you to install the display close to the wall, maintaining a cohesive look with the wall. Additionally, installation of communication devices and peripherals is not required. Simply place the STB in the storage unit to complete the setup. 【Features】 ■Secures a place for the STB ■Simplified installation *For more details, please download the PDF or feel free to contact us. *If you would like a printed catalog, please do not hesitate to reach out.

• Other fixtures and fittings

The "Wall-Mounted Plus Vertical Installation Compatible Type" is a wall mount with a storage unit for STBs. You won't have to worry about where to place communication devices and peripherals like STBs, and its slim design allows you to install the display close to the wall, maintaining a sense of unity with the wall. Additionally, installation of communication devices and peripherals is not required. Simply place the STB in the storage unit to complete the setup. [Features] ■ Secure placement for STBs ■ Simplified installation *For more details, please download the PDF or feel free to contact us.

• Other fixtures and fittings

The dustproof rack "Mamoru-kun" is designed to protect information terminal devices such as computers used in harsh environments. By sealing the interior with a unique structure, it safeguards these devices from harmful substances like dust, dirt, and oil mist that may be present in factories. **Features of Mamoru-kun Light48** - **48 Rack Sizes**: You can choose from 48 different rack sizes to suit your equipment and installation location. - **Abundant Options**: We offer a wide range of options such as shelves, stands, and keyboard trays to match your usage needs. Additionally, you can select coolers and heat exchangers based on temperature and installation conditions. - **Genuine Dustproof Functionality**: This dustproof rack is committed to sealing effectively, employing hollow rubber gaskets to enhance tightness. For more details, please download the PDF or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• Terminal board/equipment storage rack

The display stand from SDES is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through desk calculations, we conduct safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type3】 Type3 (full specification type) is a simple design digital signage stand equipped with a front frame cover and STB storage box, built on the Type1 (minimum type). The DS-S series is a stand that eliminates assembly time, as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• others

The display stand from S.D.S is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through desk calculations, actual products are used for safety tests to ensure that all products meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type2】 Type2 (Economy Type) is a simple design digital signage stand equipped with a front frame cover, based on Type1 (Minimum Type). The DS-S series is a stand that eliminates the assembly time required, as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The display stand from SDS is designed to be stable and durable, as it undergoes safety testing for all products. After confirming safety through calculations, actual products are used for safety tests to ensure that all products meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of DS-S Type1】 Type1 (minimum type) is a digital signage stand with a simple design that focuses on cost performance by omitting the front frame cover and STB storage box. The DS-S series is a stand that eliminates assembly time as it is shipped pre-assembled. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The display stand from SDS is designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we prioritize stability and durability in our product development. The tabletop commercial display stand is intended for placing products without an original stand, such as commercial displays, on a tabletop. Of course, it can also be used if the original stand has been lost or broken. *Please note that some displays may not be compatible, so please inquire about the displays that can be mounted. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we prioritize stability and durability in our product development. The double-sided signage stand is a simple and stylish stand that can accommodate large displays up to 65 inches on both sides. By mounting displays on both the front and back, it enables extensive information dissemination in central plazas of shopping malls or busy walkways. *Please inquire about compatible displays, as some displays cannot be mounted. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. The iTouch stand is a portable stand ideal for the use of simple touch displays. It can be easily set up wherever you want to place a touch display, which is expected to become increasingly useful with multilingual support, allowing for safe touch operations. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. SDS's casing stand is a dedicated model for 50/55 inch displays. By making it a general-purpose model, we eliminated the need for discussions regarding specifications, achieving a lower price. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The display stands from S.D.S are designed to be resistant to tipping over and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. The easel stand for digital signage has achieved significant cost reductions by being lightweight. *Please inquire about compatible displays, as some displays cannot be mounted. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The display stands from SDS are designed to be stable and durable, as they undergo safety testing for all products. After confirming safety through calculations, we conduct safety tests using actual products to ensure that all items meet safety standards. From the design stage, we prioritize stability and durability in our product development. 【Features of the Large Digital Signage Stand】 The large digital signage stand is compatible with digital signage displays ranging from 65 to 80 inches. It supports VESA dimensions up to W600×H600mm, making it compatible with a wide range of displays, including those from overseas manufacturers. *Please note that some displays may not be compatible, so please inquire about the displays you intend to use. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The display stands from SDS are designed to be stable and durable, as they undergo safety testing for all products. After confirming safety through calculations, actual products are used for safety testing to ensure that all items meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of the Folding Stand】 The folding stand is compatible with 40 to 55-inch displays and is easy to transport for exhibitions, events, and private shows. It becomes very compact and is easy to transform. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please let us know.

• others

The display stands from SDS are designed to be stable and durable, as they undergo safety testing for all products. After confirming safety through calculations, actual products are used for safety tests to ensure that all items meet safety standards. From the design stage, we focus on creating products that are resistant to tipping and breaking. 【Features of the Low Stand】 The low stand for large LCD displays is a display and monitor stand that can be placed on the floor, making it suitable for use in live venues, studios, and roundtable meetings. The center of the screen is adjustable between 350 to 550 mm, and the screen can be tilted up to a maximum of 30°. *Please inquire about compatible displays, as some displays may not be mountable. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform actual safety tests using the products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. 【Features of LPS-K55】 The LPS-K55 (mobile TV stand) is a mobile TV stand developed with a strategic focus on low pricing. Due to its affordability, the LPS series was thought to be imported by retailers, but it is actually a domestically produced TV stand made in our own factory in Hakusan City, Ishikawa Prefecture. *Please inquire about compatible displays, as some displays may not be mountable. *Display is not included. *For more details, please refer to the PDF document or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. 【Features of the High Position Stand】 The High Position Stand is available in a "Standard" screw-fix type and a "Move" electric height-adjustable type. The "Move" allows for easy height adjustment of the TV via remote control. Installing the TV at a higher position can also be done safely and easily since it is electric. *Please inquire about compatible displays, as some displays cannot be mounted. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please let us know.

• others

The display stands from SDS are designed to be resistant to tipping and breaking. This is because we conduct safety tests on all our products. After confirming safety through calculations, we perform safety tests using actual products to ensure that all items meet safety standards. From the design stage, we focus on creating products that are difficult to tip over and break. 【Features of the Window Display Stand】 The window signage stand is a dedicated stand that can be installed close to the glass surface of a shop window. We offer an optional equipment storage box. *Please inquire about compatible displays, as some displays may not be mountable. *Displays are not included. *For more details, please refer to the PDF materials or feel free to contact us. If you would like a printed catalog, please do not hesitate to let us know.

• others

Tumiki is a delivery box for detached houses that can be freely combined. This product is a combination of "Super Large" and "High Base" from the top. 【Features of Tumiki】 1. Freely combinable You can freely choose from three types of boxes and mailboxes to create a delivery box that suits you. "35 combination patterns × 4 colors × door: left/right opening" 2. Strong for outdoor installation It uses a corrosion-resistant steel plate made of high corrosion-resistant galvanized steel that is less prone to rust, a "water drainage" structure that prevents rainwater intrusion, and stainless steel parts that are resistant to rust, making it designed for outdoor installation. 3. Japanese-made delivery box Manufactured in our own factory located in Ishikawa Prefecture, Japan. We have strict internal standards for process management and product management, ensuring thorough control. For more details, please download the PDF or feel free to contact us. If you would like a catalog in booklet form, please do not hesitate to let us know.

• Posts and Nameplates

Tumiki is a delivery box for detached houses that can be freely combined. This product is a combination of "Post," "Large," and "High Base" from the top. 【Features of Tumiki】 1. Free Combination You can freely choose from three types of boxes and a post to create a delivery box that suits you. "35 combination patterns × 4 colors × door: left/right opening" 2. Strong for Outdoor Installation It uses a corrosion-resistant steel plate with high corrosion resistance that is less prone to rust, a "water drainage" structure that prevents rainwater intrusion, and stainless steel parts that are resistant to rust, making it suitable for outdoor installation. 3. Japanese-made Delivery Box It is manufactured in our own factory located in Ishikawa Prefecture, Japan. We have strict internal standards for process management and product management to ensure thorough quality control. For more details, please download the PDF or feel free to contact us.

• Posts and Nameplates

Tumiki is a delivery box designed for single-family homes that can be freely combined. This product is a combination of "Post," "Super Large," and "High Base" from the top. **Features of Tumiki** 1. **Flexible Combinations** You can freely choose from three types of boxes and a post to create a delivery box that suits your needs. "35 combination patterns × 4 colors × door: left/right opening." 2. **Strong for Outdoor Installation** It uses a corrosion-resistant steel plate with high corrosion resistance that is less prone to rust, a "water drainage" structure to prevent rainwater intrusion, and stainless steel parts that are resistant to rust, making it suitable for outdoor installation. 3. **Japanese-made Delivery Box** Manufactured in our own factory located in Ishikawa Prefecture, Japan. We have strict internal standards for process management and product management to ensure thorough quality control. For more details, please download the PDF or feel free to contact us.

• Posts and Nameplates