本多電子 List of Products and Services

A compact and lightweight ultrasonic level gauge that integrates the sensor and control unit. It features a graphic LCD display, allowing for the visualization of the effective A-mode waveform during installation and maintenance. The mask function helps to avoid the effects of unwanted reflections. ■ By adopting a two-wire system*, installation, wiring, and operating costs can be reduced. ■ The graphic LCD display shows the ultrasonic reflection waveform (A-mode). ■ Mask processing can be performed on obstacles within the sensor's beam angle, enabling measurement. ■ A compact and lightweight body that integrates the sensor and control unit. ■ The body is made of a fully chemical-resistant resin (PP). *Two-wire system This is a signal transmission method that eliminates the need for power wiring by obtaining power for amplifier drive from the current output signal.

• Other measuring instruments

A compact and lightweight ultrasonic level gauge that integrates the sensor and control unit. It features a graphic LCD display that allows for the visualization of the A-mode waveform, which is effective during installation and maintenance. The mask function helps to avoid the effects of unwanted reflections. ■ Displays ultrasonic reflection waveforms (A-mode) on the graphic LCD Improved data readability and enhanced operability ■ Capable of measuring by applying mask processing to obstacles within the sensor's directional angle ■ Compact and lightweight body that integrates the sensor and control unit ■ Body made of chemical-resistant resin (PP) ■ Communication functions enable remote operation via RS-485 (MODBUS protocol), 4-20 mA current output, and alarm output contacts.

• Other measuring instruments

■ Realizes a unique level detection algorithm using DSP, eliminating the effects of noise and unwanted reflections, enabling stable measurements. ■ Two sensors can be connected to a single unit. Different types of sensors can be selected, allowing measurements at two locations with different ranges using one unit. ■ Logs recorded on micro SD TM. ■ Standard equipped with a siphon-type flow measurement.

• Non-destructive testing
• Other measuring instruments

This is an ultrasonic mini welder (sealer) that can safely and easily weld using only ultrasonic vibrations. Since it does not use metal needles, there is no contamination of the contents, making waste separation during processing easier. ■ Safe and easy point welding with friction heat generated by 60,000 ultrasonic vibrations per second. ■ No contamination of contents as it does not use metal needles or heaters, and there is no waste such as needles, rubber bands, or tape. ■ The handpiece can be stored in the main unit. Simply turn on the switch and squeeze to easily weld. ■ Improved durability with the adoption of a dry-fire prevention feature. For more details, please visit our website.

• Other store equipment and supplies
• Other commercial buildings and service facilities

Ultrasound has the property of reflecting at the boundaries of different media. By emitting ultrasound from a sensor underwater and calculating the time taken for it to reflect and be received at the interface, we can determine the sedimentation state. Since measurements are taken non-contact with the sediment, it is possible to measure the interface of opaque treated water or the interface within deep tanks without lowering the sensor to the target sediment. ■ A wide range of distances from 0.2 to 10 meters can be measured from the sensor emission surface. ■ One unit can measure at two locations. (Standard equipment: one sensor) ■ Because it uses ultrasound, measurements can be taken without the influence of transparency, color, or day/night conditions. ■ The interface is measured based on computational processing that assumes changes in the quality of supernatant water and changes in the concentration of accumulated sludge, so there is no need to change set values or readjust based on the condition of the equipment. ■ Both the transducer and sensor have no moving parts, allowing for stable measurements over long periods.

• Other measuring instruments

The sensor emits ultrasonic waves directed underwater, and calculates the distance to the target object based on the time it takes for the waves to reflect off the bottom and be received. ■ Designed with a 50m waterproof structure and strong impact resistance, making it safe and easy to use (PS-7) ■ Equipped with a shock-resistant float sensor. Comes with a 10m cable for measuring depth from a distance (PS-7FL) ■ Simple operation for instant measurement ■ To operate, simply point the sensor towards the desired measurement direction and hold the switch for 2 to 3 seconds. ■ Battery-operated ■ Uses commercially available dry batteries (S-006P). ■ Features an auto power-off function that automatically turns off the power about 10 seconds after releasing the switch. 　　*Note: Measurement may not be accurate when the target object is mud or seaweed.

• Waterproofing work
• Distance measuring device/length measuring device