エナパック List of Products and Services

The "V82HK" is a hydraulic valve used for opening and closing hydraulic circuits, designed for a maximum operating pressure of 70 MPa. It is suitable for minor pressure relief within the system and for maintaining pressure in low flow rate pumps. The allowable flow rate is 12 L/min, and the port diameter is NPT 3/8. Please feel free to consult us when placing an order. 【Specifications】 ■ Maximum operating pressure (MPa): 70 ■ Allowable flow rate (L/min): 12 ■ Port diameter: NPT 3/8 ■ Weight (kg): 0.8 *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "LAT Series" is a hydraulic pump that can be operated solely by air in harsh work environments that require explosion-proof performance. It has a mass that can be carried by one worker and a compact shape, making it suitable for use in narrow or cramped scaffolding, work passages, pipe racks, and lifts. Additionally, the hydraulic pump with a three-piston design achieves the highest level of tightening and loosening speed, allowing for cost reduction without delaying work. 【Features】 ■ ATEX certified, meeting work environment compliance requirements ■ Mass that can be carried by one worker and a compact shape ■ Standard roll cage to protect air equipment and the pump body ■ Pendant switch operable by air with a 4.5m cord ■ Equipped with a certified 100mm calibrated gauge *For more details, please refer to the PDF document or feel free to contact us.

• Air compressors, blowers and pumps

The "EMLS/EMV Series" is a battery-operated machine skate designed for positioning heavy loads of up to 50 tons. It can be operated by a single operator, allowing for the execution of many projects with fewer resources and a quick return on initial investment. With a single charge, it operates for 3 hours and can move heavy loads over 1,200 meters without needing to replace the 24V battery, and it can travel at speeds of up to 8 meters per minute even when loaded. 【Features】 - Two agile drive motors and a tilt saddle that rotates 360 degrees - Capable of working in corners, areas with obstacles, and on slopes of 3% - Allows the operator to safely control remotely without pushing or pulling by hand - Easy to adapt to changing situations - Performance is consistently stable every time *For more details, please refer to the PDF document or feel free to contact us.

• Lifting and transport system

The "NSH Series" is a hydraulic nut splitter designed to comply with BS/ANSI flange standards. The depth of nut cutting can be adjusted using the blade positioning scale to prevent damage to the bolt. It features an ergonomic design and a user-friendly handle position. The nut splitter has been certified as compliant with the 94/9/EC "ATEX Declaration" based on test results. 【Features】 ■ Designed to comply with flange standards ■ An ideal tool for removing nuts ■ Adjusts the cutting depth of the nut to prevent bolt damage ■ Cutting heads and power heads can be exchanged according to application ■ Ergonomic design and user-friendly handle position *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the flow control bubble/line shut-off valves that we handle. The flow control bubbles include the "V-6N type" for a maximum operating pressure of 35MPa, the "V-77 type" for a maximum operating pressure of 70MPa, and the "VF70GS," which allows for more precise flow adjustments. Additionally, the line shut-off valve is a hydraulic valve used for opening and closing hydraulic circuits, designed for a maximum operating pressure of 70MPa. We offer the "V-8BR type," which is a balanced type that allows for smooth handle operation even under pressure. 【Features of Flow Control Valves】 ■ The "V-6N type" for a maximum operating pressure of 35MPa is a needle type that allows for fine flow adjustments. ■ The "V-77 type" for a maximum operating pressure of 70MPa is equipped with a temperature compensation mechanism. ■ The "V-77 type" allows for fine flow adjustments and can achieve complete closure. ■ The "VF70GS" allows for even more precise flow adjustments. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "ZEJ Series" is an automatic two-stage switching pump that emphasizes work efficiency and energy conservation, operating at low pressure of 7MPa and high pressure of 70MPa. In this selection table, we introduce the pump series, motor output (kW), tank capacity (L), mounted valves and functions, electrical components, and coolers for each product. Additionally, we have included accessories for electric hydraulic pumps and a selection table for the "ZEJ_TG46 Series" electric hydraulic pumps. Please take a look. 【ZEJ Series Contents】 ■ VM1/VM4 ■ HWC/HWO ■ VD1/VD1 with cooler ■ VD2/VD2 with cooler *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ZA4 Series" is a high and low pressure two-stage discharge hydraulic pump equipped with a 3kW rotary air motor. With the pressure adjustment valve included with the manual hydraulic switching valve, proper hydraulic pressure can be adjusted externally. This product is certified to the European explosion-proof standard ATEX95, making it suitable for use in environments with a risk of explosion due to fire or electrical sparks. 【Features】 ■ Equipped with a 3kW rotary air motor ■ Allows for external adjustment of proper hydraulic pressure ■ The heat exchanger can warm the exhaust to prevent pump freezing and further cool the hydraulic fluid (optional) ■ All models come standard with an oil level gauge in the reservoir tank *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "XA Series" is a variable displacement type, making it easy to control speed and positioning. It is an explosion-proof rotary air motor-driven hydraulic pump. It generates ultra-high pressure hydraulic fluid, accurately controls the fluid, and realizes the three elements of ergonomics-based operability with Enerpac's XVARI technology. We offer various types and variations, including "models with hydraulic gauges," "valves for double-acting cylinders," "models with 2L oil tanks," and "pedal safety guards." 【Features】 ■ The oil tank uses a completely sealed bladder rubber type. ■ The pump can be used in any installation orientation. ■ A pedal lock is standard equipment at the center of the pump. ■ The foot pedal of the pump can be used without fatigue. ■ The pressure adjustment valve is located on the back of the body, allowing for easy external adjustment. *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "RC Series" is a single-acting cylinder (spring return) that incorporates a double bearing (GR2) structure into the RC DUO cylinder. The return mechanism of the cylinder uses a reinforced spring, achieving both strong tension and remarkable durability. The series includes products with capacities starting from 45kN, as well as 100kN, 142kN, 233kN, 293kN/500kN, and 718kN/933kN. 【Features】 ■ The hydraulic seal is surrounded by bearings at both ends, allowing for effective distribution of eccentric loads. ■ By reducing the burden on the hydraulic seal, durability is significantly improved compared to conventional products. ■ Prevents galling on the inner surface of the cylinder and early bearing damage caused by eccentric and dynamic loads. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RA Series" is a single-acting/double-acting aluminum cylinder that has a mass of about 50-60% compared to steel cylinders, making it easy to transport and install. With bearings synthesized from new materials, a floating state is formed on the sliding surface of the cylinder, allowing it to withstand lateral loads of up to 10% of its capacity, while also reducing cylinder wear. Additionally, we offer the double-acting aluminum center hole cylinder (hydraulic return) "RARH Series," which is approximately 40% lighter than steel center hole cylinders. 【Features】 ■ About 50-60% of the mass compared to steel cylinders ■ Easy to transport and install ■ Can withstand lateral loads of up to 10% of its capacity, while further reducing cylinder wear ■ The main material, aluminum alloy steel, can be safely used even in environments prone to rust *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the air-cooled and water-cooled oil coolers, oil level switches, and temperature switches that we handle. When using electric pumps continuously at high pressure for extended periods or when the frequency of cylinder use is high, the operating oil temperature of the pump can rise abnormally, leading to potential failures. Therefore, please use an oil cooler to prevent the rise in oil temperature. Additionally, please select the standard models of water-cooled and air-cooled coolers for the "ZEJ series" and "PE6100 series" electric pumps. (Models with an "A" or "W" at the end of the model number) Oil level switches and temperature switches are effective for detecting tank oil levels and oil temperatures. 【Product Lineup】 ■ Air-Cooled Oil Coolers - EX-090-200V - PAC-3 ■ Water-Cooled Oil Coolers - PWC-3 - PWC-5 *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "PA-133 Series" is an explosion-proof air-driven hydraulic pump that can be operated and installed in any directional position. In the case of a single-acting spring return cylinder, simply operating the foot pedal allows the single-acting cylinder to advance, maintain hydraulic pressure after stopping, and then retract. The completely sealed oil tank without an air vent prevents oil leakage during transport and keeps dust from entering from the outside. 【Features】 ■ Lightweight and easy to use ■ The swivel joint at the pump oil outlet facilitates the movement and operation of the pump ■ The completely sealed oil tank without an air vent prevents oil leakage during transport and keeps dust from entering from the outside ■ There are mounting groove holes on the base of the pump *For more details, please refer to the PDF document or feel free to contact us.

• others

The "NC Series" is a hydraulic nut cutter that has become easier to use due to its unique angled head shape. It can be utilized for various applications such as railway maintenance, plumbing work, tank maintenance, petrochemical plants, steel materials, mining, and structures. The double-blade type splits the nut with a movable blade and expands it with a fixed blade, allowing the nut to be rotated and removed manually in one operation. 【Features】 - Easier to use due to the unique angled head shape - The cylinder of the nut cutter is single-acting with a spring return type - Each nut cutter comes standard with a spare blade (chisel), screws and wrenches for fixing it, and a female coupler * All models require a hydraulic pump and hydraulic hose * For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MLS Series" is a wheeled road skate that safely moves various heavy equipment. With the steerable skate from MLSF, you can easily operate it with a turntable that allows for smooth rotation even under load, making it suitable for general applications. In addition, we offer products such as the "Nylon Wheel Kit," which is suitable for reducing wear resistance and increasing capacity, as well as the "SOH Series, Machine Lift" and "LW Series, Lifting Wedge." 【Features】 ■ Low height allows for lifting and moving with minimal effort ■ MLSR rotating skate enables 360-degree turning, offering high versatility and suitability for tight spaces ■ Models equipped with nylon wheels are available upon request ■ Handles and connecting bars can be attached to the MLSR set according to application needs *For more details, please refer to the PDF materials or feel free to contact us.

• Turntable

We would like to introduce our "Automatic Couplers." The block-integrated models "AUC-115" and "AUN-115-PF1/4" are suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. The screw-in models "L391234" and "L391235" have external threads on the coupler body, making them easy to integrate and allowing for direct attachment to manifold blocks. The specifications and connection accuracy are the same as the block-integrated models. 【Features】 ■ Block-integrated type - Suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. ■ Screw-in type - Features external threads on the coupler body, making integration easy and allowing for direct attachment to manifold blocks. *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "KNS70" is a compact digital pressure switch with a flexible display that can rotate 330 degrees, allowing for adjustment of the display to a more visible direction after installation. It features a peak hold function that retains the maximum pressure and a valve hold function that retains the minimum value. The materials used for the gas and liquid contact parts are highly corrosion-resistant SUS316L, making it compatible with both gas and liquid measurement media. 【Features】 ■ Flexible display that can rotate 330 degrees ■ Ability to adjust the display to a more visible direction after installation ■ Peak hold function that retains the maximum pressure and valve hold function that retains the minimum value ■ Configurable Hi and Lo settings, allowing for comparison value settings and hysteresis settings ■ Compatible with both gas and liquid measurement media *For more details, please refer to the PDF document or feel free to contact us.

• others

The "EVOP Series" is a synchronized lifting system suitable for heavy-duty cylinders with capacities ranging from 3036 to 10644 kN. It is controlled by variable frequency drive (VFD) for synchronized operation, enabling smooth operation and high-precision high-speed lifting. Additionally, we offer products such as the "EVO-SC-25, stroke sensor cable, 25 meters," which can be connected and extended, and the "CLNC12 network controller." 【Features】 ■ The standard control interface allows for easy setup and a variety of lifting operations to choose from. ■ Lifting speed is eight times faster compared to similar methods. ■ The stroke difference between each cylinder during operation is less than 1.0 mm. ■ Built-in warning and stop alarms ensure maximum safety. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The swing clamp's maximum flow rate per clamp cylinder is determined by the length of the arm used, and the intersection of the arm length and curve represents the clamping force. When determining the clamping force, please adjust the arm length within the allowable clamping force and be careful not to damage the plunger rod during installation. This document includes information on the optional long arm "CAL series" and the optional standard arm "CAS series," featuring graphs of "Arm Length: Clamping Force: Maximum Flow Rate Relationship" and "Dimension Diagrams for Mounting Parts When Fabricating Arms." Please take a look. [Contents] ■ Arm Length: Clamping Force: Maximum Flow Rate Relationship Graph ■ Clamping Arm Dimension Table ■ Dimension Table for Arm Fabrication ■ Example of Usage Conditions for the 5kN Series ■ Dimension Diagram for Mounting Parts When Fabricating Arms *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the clamp cylinder accessories that we handle. Starting with the contact bolt "BS series," which can be attached to the tip screw of the cylinder and used as a workpiece pressing jig, we also offer flange nuts "FN series" and flange mounts "MF series." In addition, we also handle clamp cylinder mounting blocks "MRS-100F, MRS-200F, MRS-300F." 【Features】 ■ Flange Nut "FN Series" - Suitable for locking the cylinder after mounting the body screw type cylinder at any desired position. ■ Flange Mount "MF Series" - Allows for the fixing of the cylinder using a square flange mount according to the application. *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

Hot tapping is a high-pressure operation. Mirage's various hot tapping machines support safe and effective solutions. The helical gear drive unit is positioned as close as possible to the cutting head to ensure maximum efficiency, rotational pressure sealing, and four fixed feed speeds. We offer "HTM100 & HTM150XL," "LPHT," and "MHT." 【HTM100 & HTM150XL Features】 ■ Operates at 1480 psi ■ Versatile hot taps, bypass lines, and completion plugs ■ Manual rotation and feed ■ 2-inch NPT connection ■ Lightweight construction *For more details, please refer to the PDF materials or feel free to contact us.

• others

The Mirage high-durability drill machine and tap machine use a high-durability spindle with ISO standard taper, providing high torque and easy operation. With the optional switch magnet mount and chain clamp, setup can be done quickly and easily. We offer a variety of machine models. 【Features】 ■ Uses a high-durability spindle with ISO standard taper ■ Provides high torque and easy operation ■ Can be set up quickly and easily ■ Efficiently creates hanging holes in casings even in harsh working environments *For more details, please refer to the PDF document or feel free to contact us.

• others

We offer a variety of portable saws for various pipe cutting tasks. The band saw provides a cost-effective solution for cold cutting both above and underwater, while the diamond wire saw is ideal for quickly cutting mixed materials. Additionally, the bolt saw is an effective solution for cutting restrained flange bolts across a wide range of flange diameters. 【Features】 ■ Diamond Wire Saw - Durable aluminum frame / overload clutch to prevent damage ■ Manipulator Diamond Wire Saw - A low-cost compact alternative to standard diamond wire saws ■ Portable Band Saw - Low height for low-cost / small clearance applications *For more details, please refer to the PDF materials or feel free to contact us.

• others

The precision and robust milling machines for linear milling come in 2-axis and 3-axis configurations. Each is available in a portable format for workshop tool technology. For quick and efficient setup, you can choose the optional switch magnet. We offer a variety of machine models. 【Features】 <LMR: 2-axis milling machine> ■ Suitable for lightweight applications ■ Manual feed to the spindle; automatic feed is optional ■ Comes with ER40 collet and ISO30 spindle options *For more details, please refer to the PDF document or feel free to contact us.

• others

The Mirage orbital milling machine is designed for high-speed cutting and achieves high precision even with large diameter flanges. The WP orbital milling products are specifically designed for companies that manufacture wind turbine rotor blades and towers. They can be used for machining crane bearing surfaces, repairing drag lines, processing large flanges, and milling the root ends of wind turbine blades. 【Orbital Milling Machine Features】 ■ Precise flatness tolerances for various large diameters ■ Hydraulic high-torque anti-backlash drive system ■ Precision preloaded linear rotary drive system ■ Adjustable high-speed set hydraulic chuck ■ Adjustable rigidity mounting base ■ Adjustable high-speed set clamp jaws *For more details, please refer to the PDF materials or feel free to contact us.

• others

DL Rich is used worldwide to refer to pipe cutting and beveling. We provide pioneering machines that demonstrate excellent performance in construction, demolition, maintenance, fabrication, and renovation. These machines can be used for pipe cutting, as well as for welding preparation and cutting materials. We have prepared machine models "NB," "MS," and "HD." 【NB (Narrow Body) Features】 ■ Narrow body design: Suitable for tight spaces or areas with obstacles ■ Standard models covering an outer diameter range of 50.8mm (2.0 inches) to 1092.2mm (43 inches) with 15 models available ■ Hydraulic, pneumatic, and electric drive options (various drive types available) ■ Compatible with various accessories, allowing for performance enhancement and functional expansion *For more details, please refer to the PDF document or feel free to contact us.

• others

When talking to on-site machine operators about flange surface machining machines, most people think of Mirage as the manufacturer. The success of Mirage is based on the robust construction of its machines, patented power supply tool posts, and precision derived from linear technology and ball screw technology. There are various external and internal options available, allowing for easy setup, geared feed rates, and consistent results. 【Features (Quick Face)】 ■ Manual operation ■ Simple and lightweight structure: weighs only 6.8 kg (15 lbs) ■ Equipped with various feed screws to repair damaged raised faces or lens ring joint flanges to a high standard ■ Calibrated slide to achieve cutting depth and correct finish *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "STTL Series" is a hands-free torque wrench system that can securely grip the target in any orientation, including the reverse position. It prevents the risk of tool drops and reduces operator fatigue when using tools in distant or hard-to-reach places. It decreases the chances of touching pinch points and high-pressure hydraulic connections, enhancing the safety of operators during bolt work. Additionally, the "Safe T Torque Lock" has also been added to the lineup. 【Features】 ■ Prevents the risk of tool drops ■ Securely grips the target in any orientation, including the reverse position ■ Enhances operator safety during bolt work ■ Reduces the chances of touching pinch points and high-pressure hydraulic connections ■ Reduces operator fatigue when using tools in hard-to-reach places *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This product is a backup wrench for torque wrenches that contributes to improving operator safety with a hands-free solution. It eliminates the need for impact wrenches and streamlines bolt work. It includes a quick-connect carabiner, a stainless steel strap, and a safety cable with an Allen key fixture. 【Features】 ■ Spark-free ■ Does not lock during operation ■ Eliminates the need for impact wrenches ■ Accommodates two hex sizes with one tool ■ Enhances operator safety *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "PGT Series" is a hydraulic bolt tensioner designed for high-precision tightening operations of wind, steam, and gas turbines. The "FTR Series" hydraulic bolt tensioner for foundations is specially designed to apply tension to the foundation bolts of wind turbines. Additionally, the oval-shaped hydraulic bolt tensioner "FTE Series" is specially designed for securing the foundations of wind power generation towers. We also offer hydraulic bolt tensioners for power generation systems and foundations. 【Features】 ■ PGT Series - Designed for high-precision tightening operations of wind, steam, and gas turbines ■ FTR Series - Specially designed to apply tension to the foundation bolts of wind turbines ■ FTE Series - Specially designed for securing the foundations of wind power generation towers - High-precision tightening operations result in less frequent maintenance *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

This product is a "flat face one-touch coupler" that allows for secure connection of male and female couplers with a single touch operation, and also enables easy disconnection. The flat shape of the connection part prevents foreign substances from entering and makes cleaning the coupler easy, making it suitable for connecting hydraulic equipment at work sites such as construction and shipbuilding. Due to the flat shape of the connection part between the male and female couplers, there is no oil leakage during attachment and detachment. 【Features】 ■ The coupler is equipped with a rubber dust cap and a turn-lock (anti-disconnection) mechanism at the coupling part. ■ The F-604 type coupler has been approved for safety and performance by HTMA. ■ Secure connection of male and female couplers with one-touch operation. ■ The flat shape of the connection part prevents foreign substances from entering. ■ Suitable for connecting hydraulic equipment at work sites such as construction and shipbuilding. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HM Series" is designed to fit all standard flanges and features a hydraulic bolt tensioner with a 30% increase in load capacity compared to conventional models. It has a long stroke of 15mm (9/16 inch) and eliminates over-stroking. Additionally, we offer the "GT Series," which has improved handling safety with a non-slip grip and is suitable for a wider range of tasks. 【Features】 <HM Series> ■ 15 types of load cells from M20 to M100 or 3/4" to 4" ■ Twin ports for quick connection of multiple tools ■ Maximum bolt load capacity of 150MPa ■ Captive socket eliminates the risk of dropped objects ■ Interchangeable adapter kits available ■ Improved handling safety with a non-slip grip *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "RSL Series Hexagonal Cassette" is a hydraulic torque wrench designed with a simple and robust alloy steel construction featuring three movable parts, which reduces maintenance. Its innovative design completely covers all moving parts and minimizes pinch points, ensuring both safety and performance. Additionally, we offer the "RSL Series Thin Hexagonal Cassette," which minimizes the nose radius for access in tighter spaces, as well as the "RSL Series Socket Type," which can be flexibly used in combination with socket-type torque wrenches and standard impact wrench sockets. 【Features of the RSL Series Hexagonal Cassette】 ■ The reaction arm is equipped with a simple dial lock for quick changes. ■ Usable in various industrial fields such as steelmaking, power generation, electricity, petrochemicals, oil, and gas. ■ A rotation angle of 30 to 35 degrees avoids tool lock-on while simultaneously improving productivity. ■ The minimized nose radius allows tools to fit smoothly. ■ All wrenches are calibrated at the time of shipment, guaranteeing an accuracy of ±3%. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "E Series E-Pulse" is an electric hydraulic pump that achieves high efficiency through innovative design, maintaining a constant power output of the motor across the entire pressure range. With speed control via dial adjustment, it accurately operates hydraulic tools and cylinders, and features a pendant and cord winding function for added convenience. It comes standard with a convenient oil filling port, oil level gauge, and automatic breather. 【Features】 ■ High discharge oil volume efficiency relative to operating pressure ■ Stable control enabled by a DC24V power regulator ■ Smooth operation of cylinders and tools with minimal pulsation thanks to six pistons ■ Durable aluminum housing ■ Long lifespan achieved with a high-efficiency permanent magnet direct drive motor *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "MCS Series" is a portable torque calibration system suitable for users who use a wide range of controlled bolt tools in various locations. With a compact and lightweight structure, it can be easily used from the field to the truck bed, and it can accurately measure torque in the range of 200 to 10,000 Nm. The tool database function allows for the recording of specific wrench data and calibration results, which can be saved for future use. 【Features】 ■ Accurately measures the torque output of continuous rotation tools in the range of 200 to 10,000 Nm ■ Highly adaptable design, compatible with a wide variety of Enerpac and other brands of wrenches ■ Operates on an internal lithium-ion battery pack or an external power source from DC5V USB ■ The certificate manager function allows for quick and easy creation of calibration certificates ■ Compact design for easy portability, usable in factories, on-site, or inside vehicles ■ Built-in digital interface allows for display, storage, printing, or transfer of torque values to a computer *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

We would like to introduce the 'XC-1201MB / XC-1401MB' that we handle. We offer the "XC-1201MB" compatible with single-acting cylinders and the "XC-1401MB" compatible with double-acting cylinders. It combines the high-power motor drive of an electric pump with the lightweight design of a portable hand pump, allowing for easy handling on-site due to its cordless feature, and it boasts an excellent design. 【Features】 ■ The lightweight body comes with a portable handle and a detachable shoulder strap. ■ The built-in completely sealed bladder tank can be used in all directions, 360°. ■ A powerful battery provides excellent work speed and working time. ■ The pump body is made of highly durable, high-strength fiberglass and reinforced composite materials. *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "LGH Series" is a hydraulic lock grip puller that provides the same level of safety and convenience as a mechanical puller by applying pulling force through a standard 70MPa hydraulic cylinder. It can exert a maximum thrust of 576kN, making it suitable for the extraction of large components with a maximum diameter of 660mm attached to shafts. In addition to the hydraulic puller, we also offer the "LGHMS Series" master puller set, which includes a cylinder, hose, pump, and more. 【Features of the LGH Series】 ■ Improved pulling capacity by applying hydraulic pulling force, reducing operator fatigue ■ Option to choose between 2-jaw and 3-jaw configurations, regardless of the presence of a hollow cylinder ■ Locking mechanism prevents the puller's jaws from slipping off the workpiece ■ Prevents damage to the spindle when pulling against a flat surface ■ The upper part of the jaws opens wide, allowing use on thick objects *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "LGM Series" is a mechanical lock grip puller suitable for pulling small to medium-sized wheels, sprockets, bearings, and other similar shaft-mounted components. Thanks to the self-centering closure system of the puller, all claws operate simultaneously, allowing a single operator to easily attach and use the puller. 【Features】 ■ Quick and easy setup and installation for a wide range of applications ■ Secure grip with locking claws for safe and simple operation ■ Synchronized claw movement enables a single operator to perform the entire pulling operation ■ Available in configurations with 2 or 3 claws ■ Convenient adjustment handle makes positioning the claws easy, improving work speed *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "2-stage telescopic cylinder (load return)" is a hydraulic cylinder that incorporates two plungers. Compared to a single-plunger cylinder, it can achieve a longer stroke in a limited space. We also handle the "3-stage telescopic cylinder (load return)" which incorporates three plungers. 【Features】 <2-stage telescopic cylinder (load return)> ■ Improved abrasion resistance on both inner and outer surfaces due to nitro carburizing surface treatment ■ Prevents corrosion and damage to the inner surface of the cylinder ■ Ensures product lifespan and safety in harsh environments ■ Can withstand eccentric loads up to 3% of the maximum capacity of the cylinder ■ Can be used at maximum load capacity during the first stage stroke *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators

The "ZC Series" is a cordless hydraulic pump that combines the portability and convenience of a battery-operated pump with high durability and quiet operation. In addition to not emitting exhaust gases, it features a powerful brushless electric motor (1.0 kW) that achieves a maximum discharge capacity of 70 MPa. By utilizing a large lithium-ion battery, it can operate a double-acting hydraulic jack with a capacity of 100 tons and a stroke of 150 mm for approximately 50 cycles under no load. 【Features】 - Battery-operated, eliminating concerns about flammability and exhaust gases - Convenient and easy-to-operate with a 3m pendant cord - Fully rechargeable in just 1 hour - Noise level below 80 dBA *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Prime movers, torque converters, hydraulic equipment, generators

The "HCRL Series" is a double-acting hydraulic cylinder that can maintain a load for an extended period thanks to its mechanical safety lock nut. It supports a maximum operating pressure of 70 MPa and allows for hydraulic control of both pushing and retracting. It can withstand eccentric loads of up to approximately 10% of the cylinder's maximum capacity. Designed for high-frequency use with hard coating treatment, the tilt saddle attached to the cylinder can accommodate inclinations of up to 5 degrees. 【Features】 ■ Maximum operating pressure of 70 MPa ■ Coating specifications for both internal and external surfaces to withstand bad weather ■ Equipped with an over-stroke prevention stop ring ■ Low-friction safety lock nut allows for quick tightening *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Prime movers, torque converters, hydraulic equipment, generators

The "ZEJ_TG46 series" is a high-performance ultra-high pressure electric hydraulic pump. It comes standard with a high-speed response digital pressure switch and a remote switch. The solenoid valve has a built-in check valve, allowing for intermediate holding and pressure retention in the cylinder. It is suitable as a pump unit for press systems and jacking up. 【Features】 ■ High performance ■ Arbitrary pressure setting and precise pressure control are possible ■ The solenoid valve operates smoothly without switching shock at high pressure ■ Pressure relief on the pressurizing side is possible even without power ■ Comes with a DIN connector with a pilot lamp *For more details, please refer to the PDF document or feel free to contact us.

• pump

The Enapak Ultra Flat Hydraulic Cylinder Series offers both "Tilt Type (CUSP Series)" and "With Stop Ring (CULP Series)." These products are ultra-low profile and can handle a maximum eccentric load of up to 4%. Additionally, the nitro carburizing surface treatment enhances wear resistance and prevents corrosion. 【Features】 ■ CUSP Series - Tilt type - Plunger with a tilt function that accommodates angles from 2° to 4° - The maximum stroke can be visually confirmed by the red line on the plunger ■ CULP Series - With stop ring *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Multi-stage Telescopic Hydraulic Cylinder Series" is a product equipped with a tilt saddle that allows for an inclination of up to 5 degrees. Additionally, it comes standard with two certified lifting eyes. 【Features of the RT Series】 ■ Maximum capacity: 137 - 309 kN ■ Stroke: 270 - 600 mm ■ Maximum operating pressure: 70 MPa *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Super Large Lift Hydraulic Cylinder Series" is a product specialized for jack-up operations. We offer a lineup including the "HCG Series Single-Acting Cylinder," "HCR Series Double-Acting Cylinder," and "HCL Series with Safety Lock Nut." This product, combined with Enerpac hydraulic pumps, creates a world-class hydraulic system that ensures the safe and reliable execution of very challenging jack-up operations. 【Features】 ■ Hard coating treatment applied, strong against eccentric loads with high-frequency specifications ■ The exterior and interior of the cylinder are designed to withstand bad weather ■ Easy operation due to the low-friction structure of the safety lock nut ■ Bearing technology prevents wear and internal damage to the cylinder even under strong eccentric loads ■ Low-wear ultra-high-pressure hydraulic seal technology *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Sink Grip Puller" is a product designed to make the extraction of parts easier and safer. It allows for the easy removal of bearings, bushes, gears, sprockets, and flywheels. We offer both mechanical and hydraulic models that can accommodate various applications. Additionally, the hydraulic model set includes a pressure gauge to monitor safe pulling force. 【Features of the Mechanical Sink Grip Puller】 ■ The Sink Grip Puller has a structure where the claws close simultaneously. ■ The length of the reach can be adjusted to match the position of the holes in the claws. ■ The pulling load is evenly distributed. ■ The claws are made of high-strength forged material, ensuring excellent reliability. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools