日本オートマチックマシン List of Products and Services

- Equipped with the highly reliable "JACK" insertion unit on both sides, enabling harness processing as short as 40mm. - Set production with different wire colors and varying cut lengths is also possible.

• Wiring devices

- Adopts an inertia lock mechanism that guarantees a secure connection. - Compatible with a wide range of wire sizes through two types of terminals (#22 to #26, #26 to #30). - Pin and socket terminals share a common specification with RJA connectors. - A wealth of safety mechanisms (lock guards, guide ribs, colored keying, etc.) assist in ensuring secure locking, preventing twisting, and avoiding incorrect insertion, thereby reducing process defects. - The use of a retainer (optional) enhances safety with a double-locking structure. - Housing material is made of PBT.

• Wiring devices

● Compact multi-pole connector with robust construction and excellent workability ● Contact movable parts are placed on the wafer side, simplifying the contact shape to prevent deformation during harness processing ● Contacts adopt a tuning fork contact structure, reducing insertion and extraction force and improving contact reliability during twisting and vibration ● A locking mechanism using housing lances achieves strong terminal retention ● A wide locking retention design across the entire length of the connector prevents housing lift during twisting and pulling out ● Improved workability for mounting on the wafer due to insertion guide ribs

• Wiring devices

- Further miniaturization of high-performance connectors exclusively for automobiles - Performance demonstrated under conditions required for automotive equipment, such as vibration resistance, shock resistance, and high-temperature environments - Significantly enhanced substrate peeling strength due to the effect of large reinforcement tabs equipped on the wafer - Side retainers greatly strengthen the prevention of incomplete contact insertion and enhance wire pull strength - Smooth operability ensured with a soft inner lock mechanism - Achieving both cost-effectiveness and usability by constructing an adsorption surface on the wafer (vertical type)

• Wiring devices

- Further miniaturization of high-performance connectors exclusively for automobiles - Performance demonstrated under conditions such as vibration resistance, shock resistance, and high-temperature environments required for in-vehicle equipment - Significant enhancement of substrate peeling strength due to the large reinforcement tab effect equipped on the wafer - Complete prevention of incomplete contact insertion and substantial strengthening of wire pull strength through the side retainer - Ensured smooth operability with a soft inner lock mechanism - Achieving both cost-effectiveness and usability by constructing an adhesion surface on the wafer (vertical type)

• Wiring devices

The "SBP1000AE (Full Closed Pressure Control Specification)" is a servo press that achieves high precision and stable pressurization performance through a pressure data feedback function, utilizing a "full closed pressure control method." The length of the ram stroke, ram descent speed, pressurization speed, and bottom dead center stop time can be set arbitrarily. Additionally, by using the profile mode, the ram stop position, descent speed, and stop time can be set at up to five points within a single process. 【Features】 ■ Minimal impact load reduces the risk of cracks and shape deformation ■ High precision pressure retention through actual pressure measurement with a load cell ■ Two-stage pressure control is possible ■ Equipped with a color LCD touch panel *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "SNR connector" is a thin, potting-type connector. The double-arm lock mechanism enhances workability and operability with an excellent click feel, ensuring high reliability. With abundant safety features such as guide ribs and colored keying, it assists in reducing process defects by preventing misalignment and incorrect insertion. Retainers and bosses can be selected based on application. 【Features】 ■ Thin potting type ■ Double-arm lock mechanism improves workability and operability with an excellent click feel ■ Assists in reducing process defects with abundant safety features ■ Retainers and bosses can be selected based on application ■ RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• others

The "RJA Connector" is a connector that employs an inertia locking mechanism to ensure a reliable connection. It can accommodate a wide range of wire sizes with two types of terminals (#22 to #26) and (#26 to #30). With abundant safety features such as lock guards, guide ribs, and colored keying, it assists in reducing process defects through reliable locking, prevention of misalignment, and prevention of incorrect insertion. By adopting a retainer (optional), it enhances safety with a double-locking structure. 【Features】 ■ Adopts an inertia locking mechanism ■ Accommodates a wide range of wire sizes with two types of terminals (#22 to #26) and (#26 to #30) ■ Assists in reducing process defects with abundant safety features ■ Enhances safety with a double-locking structure by adopting a retainer (optional) ■ RoHS compliant *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ML80-R" is a lightweight vise with an integrated structure between the clamp's screw mounting part and the main body, which improves stability when placed horizontally. Since the main body is made of PET resin, it is lightweight and easy to carry, and it also excels in heat resistance, cold resistance, electrical insulation, and chemical resistance. When used with inspection equipment or measuring devices, there is no worry about scratching the surface of the measurement table. It can be used as an auxiliary gripping tool for work. 【Features】 ■ Integrated structure between the clamp's screw mounting part and the main body ■ Improved stability when placed horizontally ■ Made of PET resin, lightweight and easy to carry ■ Excellent heat resistance, cold resistance, electrical insulation, and chemical resistance ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• others

The "WL80-R" is a lightweight vice suitable for applications such as inspection equipment and measuring devices. Since the body is made of PET resin, it is lightweight and easy to carry, and it also excels in heat resistance, cold resistance, electrical insulation, and chemical resistance. When used with inspection equipment or measuring devices, there is no need to worry about scratches on the measuring table surface. It can be used as an auxiliary gripping tool for work. 【Features】 - Made of PET resin, lightweight and easy to carry - Excellent heat resistance, cold resistance, electrical insulation, and chemical resistance - No worries about scratches on the measuring table surface - Usable as an auxiliary gripping tool for work - Made to order *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SP150" is an auxiliary plate using the sign bar method. It secures the workpiece by utilizing the tapped holes on the top surface of the plate and the stopper on the side. 【Features】 ■ Auxiliary plate using the sign bar method ■ Secures the workpiece by utilizing the tapped holes on the top surface and the stopper on the side ■ Made of SKS material / inclined processing / magnetic *For more details, please refer to the PDF document or feel free to contact us.

• others

The "APM75" is an L-shaped clamp fixture that can be used for profile grinders. The main body of the L-shaped clamp fixture (excluding the magnetic plate) is made of a special stainless material that offers excellent corrosion resistance. Additionally, it has undergone full hardening (HRC55°) and sub-zero treatment, providing superior wear resistance and precision maintenance. It can be used in various processing scenarios such as grinding, cutting, and inspection. 【Features】 ■ Used as a fixture for profile grinders ■ Stainless / Magnetic ■ Excellent corrosion resistance, wear resistance, and precision maintenance ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• others

The "APS150" is an L-shaped clamp jig that can be used for profile grinders. It is made of special stainless steel, offering excellent corrosion resistance, and features full hardening (HRC 55°) and sub-zero treatment, which enhances wear resistance and precision maintenance. It can accommodate a magnetic plate (model: RMJ150). It can be used in various processing scenarios such as grinding, cutting, and inspection. 【Features】 ■ Used as a jig for profile grinders ■ Stainless steel / Magnetic ■ Excellent corrosion resistance, wear resistance, and precision maintenance ■ Compatible with magnetic plate (model: RMJ150) ■ Made to order * For more details, please refer to the PDF document or feel free to contact us.

• others

The "CC03" is a manual slide guide beveling machine. It performs beveling by sliding a V-guide with the workpiece placed on it, ensuring that no scratches are made on the workpiece. By using a cylindrical carbide spiral cutter, it achieves excellent durability and a beautiful finished surface. It is a low-noise machine that excels in safety and is friendly to the working environment. 【Features】 ■ Slide guide type ■ No scratches on the workpiece ■ Uses a cylindrical carbide spiral cutter ■ Achieves excellent durability and a beautiful finished surface ■ Low noise, excellent safety, and friendly to the working environment *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CC02" is a standard chamfering machine that uses a cylindrical carbide spiral cutter, enabling excellent durability and beautiful finished surfaces. It is a low-noise machine that excels in safety and is friendly to the working environment. 【Features】 - Standard type - Uses a cylindrical carbide spiral cutter - Achieves excellent durability and beautiful finished surfaces - Low noise, excellent safety, and friendly to the working environment *For more details, please refer to the PDF document or feel free to contact us.

• others

●Ultra-low profile design with a mounting height of 2.0mm. ●Adoption of side spring lock for stress-free insertion and removal. ●Increased resistance to misalignment with the integrated insertion guide reinforcement tab. ●Processable with fully automatic terminal insertion machine (JACK).

• Wiring devices

The "JN07SD-IS-C" is a dual-end crimping and single-end crimping insertion machine equipped with a multi-color wire selector. It features a highly reliable "JACK" insertion unit on both sides, allowing for harness processing as short as 40mm. 【Features】 ■ Equipped with "JACK" insertion unit ■ Capable of harness processing as short as 40mm ■ Allows for set production with different wire colors and cutting lengths ■ Single-end soldering unit can be added (optional: one side) *For more details, please refer to the catalog or feel free to contact us.

• Wiring devices

● Connector for low insertion force multi-pole power supply ● Finger-friendly multi-faceted design ● Simple rectangular wafer ● Box structure with mis-insertion and distortion prevention mechanism

• Wiring devices

● Achieves a mounting dimension of 29.6mm with a 4.2mm pitch and a rated current of 10A. ● The terminals are box-shaped, and the contact area adopts a face-to-face dimple structure, ensuring high connection reliability. ● The housing lock features a strong inner lock against disengagement, and the terminal retention uses a reliable housing lance structure, achieving stable connection reliability. ● By adopting a retainer (optional), safety is enhanced with a double-locking structure. (Can be used with a coating outer diameter of 2.6mm or less) ● Features a reverse insertion and misalignment prevention structure. ● Adopts a panel lock structure that does not interfere with wiring.

• Wiring devices

● The housing adopts an outer lock that makes removal easy. ● By providing directional ribs between the housings, reverse insertion is completely prevented. ● The SMD connector for the board-to-wire and the plug housing and contacts can be used interchangeably. ● A housing for panel mounting is also available.

• Wiring devices

● The housing lock features a strong inner lock that is resistant to disengagement, and the terminal retention employs a reliable housing lance structure, achieving stable connection reliability. ● By adopting a retainer (optional), safety is enhanced with a double-locking structure. ● The SRM connector for circuit boards can be used with the same plug housing, allowing for structural differentiation between board use and relay use with the same components and circuits, enabling harness sharing.

• Wiring devices

● The housing adopts an outer lock system that makes removal easy. ● By providing directional ribs between the housings, reverse insertion is completely prevented. ● The SHM connector for the circuit board and the plug housing and contacts can be used interchangeably. ● A housing for panel mounting is also available.

• Wiring devices

● 1.25mm pitch high-density dual connector. ● The multi-faceted design that is gentle on the fingers improves workability and operability. ● Simple rectangular wafer. ● By providing an adsorption surface on the straight-type wafer, it is possible to mount the substrate without using adhesive tape or covers. Additionally, the process of removing tape or covers after mounting is also unnecessary. ● Compact low-profile design Straight type height: 8.45mm Right angle type height: 8.05mm

• Wiring devices

●1.25mm pitch high-density connector. ●Low insertion and extraction type connector. ●The finger-friendly multi-faceted design improves workability and operability. ●The locking mechanism with housing lance achieves strong terminal retention.

• Wiring devices

● The housing adopts an outer lock method that makes removal easy. ● By providing directional ribs between the housings, reverse insertion is completely prevented. ● The SJW connector for the circuit board and the plug housing and contacts can be used interchangeably. ● Panel lock structure.

• Wiring devices

● The terminal is only of the straight type. ● Supports high current with a 3.96mm pitch. ● Provides a good click feel when inserting into the board, allowing for stable operation.

• Wiring devices

●Low-type structure with a total height of 5.5mm

• Wiring devices

● There are two types of terminals: angle and straight. ● Both the angle and straight types share the same housing.

• Wiring devices

● A low-profile connector with a mounting height of 3.0mm on the board (60% of our standard) and a 2.0mm pitch, suitable for compact high-density mounting. ● Ideal for increasing density within devices and reducing resin costs during potting.

• Wiring devices

● There are two types of terminals: angle and straight. ● Both the angle and straight types share the same housing.

• Wiring devices

● There are two types of terminals: angle and straight. ● Both the angle and straight types share the same housing.

• Wiring devices

●Industry's first slim power connector ●Center lock type low-profile flat design (H=6.8) ●Anti-tilt mechanism during mating ●Halogen-free compliant

• Wiring devices

● The terminals are box-shaped, and the contact part adopts a face-to-face dimple structure, achieving high connection reliability. ● Designed to facilitate printed circuit board design with a 7.5mm pitch, while maintaining a height of 16.2mm and a thickness of 10mm in the mounted state, achieving a rated current of 10A. ● The housing lock features a reliable positive lock, and the terminal retention employs a secure housing lance structure, ensuring stable connection reliability. ● A box-type wafer with a reverse fitting and reverse insertion prevention structure is used, which also prevents forced insertion and extraction. The wafer pins have a press-fit structure that completely prevents flux rise.

• Wiring devices

● The housing lock features a strong inner lock and a housing lance structure that securely holds the terminals, ensuring stable connection reliability. ● The adoption of a retainer (optional) improves safety with a double locking structure. ● Since the relay RM connector and the plug housing can be used interchangeably, harnesses can be shared when structurally differentiating between board use and relay use with the same components and circuits. ● Wafer compatible with potting is also available.

• Wiring devices

● A structure that pursues improved insertion and extraction operability and tracking resistance based on the connection reliability of the SV connector. ● The locking of the housing and wafer features an easy-to-insert and extract outer lock structure. ● Wafer compatible with potting is also available.

• Wiring devices

● The adoption of the outer lock mechanism has improved the workability of attaching and detaching the housing and wafer. ● The two ribs provided on both sides of the housing lock prevent reverse insertion of the wafer. ● Since the relay RMD connector and plug housing can be used interchangeably, when structurally differentiating between components for the circuit board and relay using the same parts and circuits, the harness can be shared.

• Wiring devices

● The housing lock features a strong inner lock and a housing lance structure that securely holds the terminals, ensuring stable connection reliability. ● By adopting a retainer (optional), the double-locking structure enhances safety. ● Since the relay RM connector and the plug housing can be used interchangeably, it is possible to share harnesses when structurally differentiating between board use and relay use with the same components and circuits. ● Wafer compatible with potting is also available.

• Wiring devices

● The contact method guarantees high reliability against micro-sliding, featuring a double-dimple structure. ● The housing and wafer have a secure locking and mis-insertion prevention structure. ● The wafer is designed as a complete BOX type, with measures against distortion. ● Compact high-density mounting design. ● Wafer compatible with potting is available.

• Wiring devices

● The adoption of the outer lock mechanism has improved the workability of attaching and detaching the housing and wafer. ● The two ribs provided on both sides of the housing lock prevent reverse insertion of the wafer. ● Since the relay RMH connector and plug housing can be used interchangeably, when structurally differentiating between board use and relay use with the same components and circuits, the harness can be shared.

• Wiring devices

● Low insertion force multi-pole connector ● Finger-friendly multi-faceted design ● Simple rectangular wafer ● Box structure with mis-insertion and skew prevention mechanism

• Wiring devices

● The housing adopts an outer lock system that makes removal easy. ● By providing directional ribs on the housing and the wafer, reverse insertion is completely prevented. ● The relay RJW connector can be used in common with the housing and contacts.

• Wiring devices

● The housing and wafer lock employs an inner lock to prevent dislodging due to external pressure. ● By adopting a retainer (optional), safety is enhanced with a double-locking structure. ● Wafer compatible with potting is also available.

• Wiring devices

● The contact method features a dimple structure on both sides that guarantees high reliability against micro-sliding. ● The housing and wafer have a secure locking and mis-insertion prevention structure. ● The wafer is designed as a complete BOX type, effectively preventing misalignment and flux rise. ● It can be produced using a fully automatic terminal insertion machine (ACE 500). ● Compact high-density mounting design. ● A bottom-entry type wafer is available.

• Wiring devices

● The adoption of the outer lock mechanism has improved the workability of attaching and detaching the housing and wafer. ● The two ribs provided on both sides of the housing lock prevent reverse insertion of the wafer. ● Two types of terminals (#22 to #24) and (#24 to #30) allow for compatibility with a wide range of wire sizes. ● SMT-compatible wafers are available.

• Wiring devices

● The adoption of the outer lock mechanism improves the workability of attaching and detaching the housing and wafer. ● The two ribs provided on both sides of the housing lock prevent reverse insertion of the wafer. ● Two types of terminals (#22 to #24) and (#24 to #30) allow for compatibility with a wide range of wire sizes. ● SMT-compatible wafers are available.

• Wiring devices