ハルツォク・ジャパン List of Products and Services

For rough polishing and surface finishing of steel, non-ferrous metals, substrates, resins, etc. It can be used as a substitute for SiC grinding paper. White alumina has slightly higher grinding power than alumina and is characterized by good friability. Its good friability makes it suitable for sample polishing as it is less likely to create large, deep scratches. 【Features】 ○ It does not fall under the Labor Safety and Health Act, so there is no hassle of maintaining 30 years of work records. ○ Higher grinding power than alumina, suitable for a wide range of samples. ○ Good friability, making it less likely to create deep scratches, thus suitable for sample polishing. ○ A wide range of abrasive grain sizes from #80 to #3000. ○ The diameter sizes are as follows: ・φ200mm ・φ203mm ・φ223mm ・φ250mm ・φ300mm ・φ305mm ○ Available in various options, both adhesive and non-adhesive.

• Geological Survey

Diamond abrasives are widely used in sample grinding. While having a variety of types is an advantage, it can feel like a disadvantage for those who are not familiar with grinding. Every time we receive inquiries about what to choose, we have been explaining verbally, but it often doesn't get communicated effectively... Therefore, we have created a simple explanatory document on how to differentiate them, which we hope will be helpful. <Contents> - Differences between spray, slurry, and paste - Differences in abrasive grain shapes - Advantages and disadvantages of each - Recommended usage methods - Comparison table and more. *If you would like to know more details, please feel free to contact us.

• Other flooring materials
• Geological Survey Company
• Geological Survey

For rough polishing and surface finishing of steel, non-ferrous metals, substrates, resins, etc. It can be used as an alternative to SiC grinding paper. 【Features】 ○ It does not fall under the Labor Safety and Health Act, so there is no need for 30 years of work record maintenance. 〇 Abrasive particle sizes range from #80 to #1200. 〇 The diameter sizes are as follows: ・φ200mm ・φ203mm ・φ223mm ・φ250mm ・φ300mm ・φ305mm 〇 Available in various options, both without adhesive and with adhesive.

• Geological Survey
• Geological Survey Company

Paper Zero 04 is primarily made from plant-based paper. It is a product that helps reduce CO2 emissions during manufacturing and disposal, contributing to measures against global warming. Additionally, it does not generate dust, odors, or toxic gases, allowing operators to handle it safely and providing a stress-free working environment. 【Features】 ◆ After shaping, it can be disposed of as combustible waste since it is treated as a paper product. ◆ No dust is generated. ◆ There is no odor specific to resins. ◆ No toxic gases such as formaldehyde are emitted during burial. ◆ It creates a safe workplace environment even in areas without ventilation. ◆ It is crushable, allowing for the retrieval of embedded samples. ◆ It has good compatibility with epoxy resins and can also be used as a filler. ◆ Work efficiency will undoubtedly increase. ◆ It contributes to CO2 reduction. ☆ Free samples are currently available. Please feel free to contact us!

• Geological Survey
• Non-destructive testing

If you use a disposable type for embedding, you can polish it as is along with the mold. Therefore, there is no need to remove it from the mold, which is expected to shorten the labor time. This is suitable for cases where a large number of samples are embedded, and samples can be clearly seen from the side. The size of the samples that can be embedded needs to be confirmed by the inner diameter of the ring. 【Features】 ◆ Disposable type that requires no hassle ◆ Lens effect from the acrylic ring allows for clear side viewing of samples ◆ Suitable for large-scale embedding ★ It is now available for purchase on Amazon.

• Geological Survey
• Non-destructive testing

How are the storage solutions for buffs, diamond pads, and plates used in automatic polishing machines handled? Generally, drawers in workbenches are used, but there is a risk of contamination (mixing with other polishing materials), so the basic practice is to store one piece per drawer, which takes up valuable storage space. Additionally, poor drainage can lead to rust and mold. Therefore! We propose the "B Cube." The buff box is a space-saving vertical storage type that holds 6 pieces. It has excellent drainage and comes with a water catch pallet. 【Features】 - Can store sizes from Φ200 to 300 mm, and Φ8 to 12 inches - No issues with storing different diameters - Vertical storage ensures good drainage - Comes with a water catch pallet, allowing storage of wet buffs - Wide spacing between buffs makes it easy to take in and out, even for people with large hands - Can be stacked in two layers For more details, please refer to the catalog. For inquiries by phone, please contact us at: 03-5907-1774, Attn: Osuka Feel free to reach out with any questions!

• Geological Survey
• others

This is a mini vice for the Mikuracut series of precision cutting machines. Have you ever experienced not knowing which vice to choose due to the wide variety available? If you're having trouble selecting a vice, please refer to this user manual first to choose the vice that suits your sample. 〇 General-purpose vice 〇 Long workpiece vice 〇 Round vice 〇 Vice for irregular samples 〇 Adhesive vice 〇 Bone vice 〇 Teardrop vice 〇 Vice for vertical cutting of screws 〇 Vacuum holder for thin samples In addition, custom clamps can also be created. Please feel free to contact us.

• Geological Survey
• Geological Survey Company

Automatic feed cutting and manual cutting by lowering the lever are possible. By setting up the table, cutting of board-like materials such as circuit boards and sheet metal is also possible. Furthermore, by attaching a grinding wheel, precision cutting is achievable, allowing for the trimming and polishing of specific areas of the sample. 【Features】 - Compatible with grinding stones and wheels up to φ200mm - Compatible with polishing wheels up to φ175mm - Automatic cutting with program control - Manual cutting by lowering the lever - Parallel slice cutting with an accuracy of 5um is also possible - Easy cutting of circuit boards with a table saw - When the cutting chamber cover is opened, the brake engages and the wheel stops immediately.

• Geological Survey
• Other measuring instruments
• Other analytical equipment

It has high performance in cooling and cleaning properties, which are essential for precision cutting to avoid damaging the tissue. Furthermore, it possesses strong capabilities in rust prevention and corrosion resistance, which are necessary to protect both the sample and the precision cutting machine. It eliminates the unique irritating odor of cutting oil, reducing stress for the operator and improving the working environment. Additionally, the presence of metal ions is an indispensable factor to consider in precision cutting. Metal ions are a significant cause of machine corrosion and paint peeling, which can shorten the lifespan of cutting machines. Abcool has properties that make it resistant to the effects of metal ions, suppressing coolant degradation and allowing for prolonged use. It also enables a reduction in maintenance frequency and extends equipment lifespan, promising high cost-effectiveness. 【Features】 〇 High cooling performance 〇 High cleaning power 〇 Excellent rust and corrosion resistance 〇 Ultra-low odor type 〇 High stability and long lifespan For free samples or SDS, please feel free to contact us.

• Geological Survey
• Geological Survey Company

We introduce from the manufacturer's perspective how to select the specifications for a sample grinding machine, often overlooked confirmation points, and how to establish new grinding conditions, from the consideration stage before purchase to the preparation method for immediate operation after delivery. <Contents> - Introduction - Let's create a specification sheet - 1. Confirm the installation location and utilities - 2. Choose between a manual or automatic grinding machine - 3. Number of grinding stages - 4. Selection of grinding disk size - 5. Confirm the direction of head movement - 6. Selection of sample pressurization method - 7. Presence or absence of an automatic feeder - 8. Confirm internal rules - After finishing the specification sheet - Envisioning equipment operation - Equipment demonstration - Establishing grinding conditions - Confirming essential after-sales service - Conclusion When we talk to customers, it is not uncommon to hear from new personnel responsible for equipment purchases who say they have no understanding of grinding at all. We created this document in hopes of providing something useful for those struggling in their roles. This is not about selecting our company's equipment, but rather general content regarding sample grinding selection, including competitors. We hope you find it useful when selecting a sample grinding machine.

• Geological Survey
• others

The goal of "Haltzok Workshop" is to respond to the demands of niche industries specialized in jigs and components for sample preparation. This includes dedicated holders for polishing machines, special clamps for cutting machines, and the creation of parts that other companies have declined. If it relates to sample preparation, you can trust "Haltzok Workshop." ■ Why choose Haltzok Workshop? At Haltzok, we provide total support for sample preparation, including the sale and maintenance of cutting machines, embedding machines, and polishing machines, as well as various condition settings. For parts and jigs used in sample preparation, detailed explanations are unnecessary since the purpose of use is clear. We will also propose necessary precision and material selection at Haltzok Workshop. Furthermore, we can accommodate requests even for equipment other than Haltzok's. If you are told that parts cannot be supplied by other companies, please consult Haltzok Workshop.

• others

Hartzok, the market leader in sample preparation equipment used in the analysis and quality control of the steel and cement industries, will introduce the fundamental technologies related to its operation and automation. [Content] This is a foundational edition that incorporates years of experience and knowledge on sampling, transportation, and adjustment methods, as well as automation. If you would like to know more, please feel free to contact us.

• others
• Other analytical equipment

The rotating sample fixation stand (rotation clamp) can be used with the precision cutting machine "MicraCut." <Features> ■Reduction of cutting time It can cut off at half the cutting distance of normal cutting. ■Reduction of cutting load The contact area of the cutting wheel is smaller, which reduces the load on the sample. ■Clean cutting of the outer circumference Since it cuts from the outer circumference, there are no burrs on the edges, making it suitable for cutting when you want to observe surface treatment.

• others
• Other analytical equipment

We offer various clamps for securing samples for precision cutting machines. - One-touch clamp - Spring clamp - Vertical clamp - Chain clamp - Angle-adjustable clamp - Various small sample vices, etc. A wide variety of clamps are available. Additionally, custom clamps can also be made.

• Geological Survey
• Geological Survey Company

Hardened steel has a high hardness and a compact cutting surface, making it unsuitable for cutting with cutting wheels. However, there is a strong demand for cutting with grinding wheels, and to address this issue, Meibia S was born. Meibia S is designed based on repeated cutting tests on hardened steel, with specifications that are believed to be the most suitable. 【Features】 - It is a wet precision cutting wheel for hardened steel. - It can be used for hard iron-based materials with alumina-based abrasives. - It has become possible to sell at a low price due to mass production. Free samples are currently being distributed. If you are interested, please feel free to contact Haruzoku Japan.

• Geological Survey
• Geological Survey Company

This is a reusable silicone mold. It has the best release properties among embedded molds and is easy to use. Compared to plastic molds, the transparency on the sides is lower. 【Features】 ◆ Economical and reusable ◆ Good release properties and easy to remove ◆ Can embed large samples ★ It is now available for purchase on Amazon. - Cylindrical shape https://amzn.to/3bBrs0v - Rectangular shape https://amzn.to/2Kxmbvf

• Geological Survey
• Non-destructive testing

When setting samples such as substrates or thin plates and adding resin, it is common for them to fall or tilt, leading to embedding failures. Retrieving embedded samples often requires additional work, such as breaking or dissolving the resin, which can be a significant burden for the operator. By using sample clips, it is possible to reduce embedding failures and operator stress. 【Features】 ◆ Can stabilize thin samples upright ◆ Three types of clips available ◆ Usable for both hot and cold embedding Free samples are available. Please feel free to contact us if you are interested.

• Geological Survey
• Non-destructive testing

<Features> ■ The polishing machine can be used in places without water supply and drainage facilities. ■ It is an environmentally friendly device as it does not produce polishing wastewater. ■ Control is done only by opening and closing the valve, so no electrical connection to the polishing machine is required. ■ It is compact and small enough to fit under a workbench.

• Other analytical equipment
• others
• Geological Survey

It is a thermoplastic embedding resin. 【Features】 ◆ It is a high-hardness acrylic resin. ◆ It has high transparency, allowing for a complete view of the sample. ◆ Alcohol-based lubricants can be used. ★ It is also available for purchase on Amazon. Please check the link below.

• Geological Survey
• Non-destructive testing

It is a thermosetting embedding resin. 【Features】 ◆ Contains glass fibers to reduce edge sagging. ◆ Suitable for samples made of hard metal materials. ◆ It is green in color, making it easy to check the samples. ★ It is also available for purchase on Amazon. Please check the link below.

• Geological Survey
• Non-destructive testing

It is a thermosetting embedding resin. 【Features】 ◆ It is the most affordable embedding resin among thermosetting resins. ◆ Available in powder and granule types. ◆ The granule type is available in three colors for identification. ★ It can also be purchased on Amazon. Please check the link below.

• Geological Survey
• Non-destructive testing

It is a thermosetting embedding resin. 【Features】 ◆ It is said to be the most suitable resin for sample embedding among thermoplastic resins. ◆ Available in powder and granule types. ◆ High adhesion. ◆ High hardness. ★ It can also be purchased on Amazon. Please check the link below.

• Geological Survey
• Non-destructive testing

This is a polishing material suitable for cross-sectional observation, tissue observation, and defect analysis sample polishing. It is used in conjunction with diamond abrasives during buff polishing. 【Features】 〇 Available in three types: alcohol-based, glycerin-based, and water-based. 〇 Reduces heat generation during buff polishing. 〇 Provides a sliding effect to prevent diamond abrasives from embedding too deeply. ☆ It is now available for purchase on Amazon. (There is a link below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is a polishing material suitable for sample polishing in cross-section observation, tissue observation, and defect analysis. It is suitable for finishing the polishing of metals such as copper and titanium. 【Features】 〇 Effective for finishing polishing of metals like copper and titanium. 〇 Please try it on samples that cannot be polished well with diamond polishing materials. ☆ It is now available for purchase on Amazon. (A link is provided below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is a polishing material suitable for sample polishing in cross-sectional observation, tissue observation, and defect analysis. It is suitable for finishing the polishing of metals such as aluminum and stainless steel. 【Features】 〇 Effective for finishing polishing of aluminum, stainless steel, etc. 〇 It has a chemical polishing effect, resulting in a smooth polished surface. 〇 Please try it on samples that cannot be polished well with diamond polishing materials. 〇 Short polishing time. ☆ It is now available for purchase on the Amazon site. (There is a link below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is an abrasive suitable for sample polishing in cross-sectional observation, microstructural observation, and defect analysis. In polishing steel samples, alumina abrasives often yield better results than diamond abrasives. 【Features】 〇 It is the optimal abrasive for finishing polishing of carbon-rich iron-based materials. 〇 A wide range of sizes (μ) is available. 〇 It is more affordable compared to diamond abrasives. ☆ It is now available for purchase on Amazon. (There is a link below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is a polishing material suitable for cross-sectional observation, tissue observation, and defect analysis sample polishing. We uniformly blend high-quality diamond polishing materials. Our company positions suspension as a higher quality polishing material compared to slurry. 【Features】 〇 High uniformity, making it suitable for use with automatic feeders as it is less likely to stick inside the hose. 〇 A wide range of sizes (μ) is available. 〇 There are two types of abrasive particle shapes: polycrystalline and single crystal. 〇 If you have difficulty with finishing polishing, please try this product. ☆ It is now available for purchase on Amazon. (A link is provided below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is a polishing material suitable for cross-section observation, tissue observation, and defect analysis sample polishing. It is a diamond slurry abrasive with a lubricant, making it easy to manage polishing conditions without the need for additional lubricants. 【Features】 〇 A wide range of sizes (μ) is available. 〇 There are two types of abrasive grain shapes: polycrystalline and single crystal. 〇 Automatic supply is possible. ☆ It is now available for purchase on the Amazon site. (A link is provided below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is an abrasive suitable for sample polishing for cross-sectional observation, tissue observation, and defect analysis. It is a polishing agent with uniformly blended diamond abrasives. 【Features】 〇 A wide range of sizes (μ) is available. 〇 There are two types of abrasive shapes: polycrystalline and single crystal. 〇 Automatic supply is possible. 〇 It offers excellent cost performance. ☆ It is now available for purchase on Amazon. (There is a link below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

This is a polishing material suitable for cross-sectional observation, tissue observation, and defect analysis sample polishing. It is a polishing agent with high-quality diamond abrasives evenly blended. 【Features】 〇 A wide range of sizes (μ) is available. 〇 There are three types of abrasive shapes: polycrystalline, single crystal, and natural. 〇 It is a cost-effective polishing agent that is not prone to abrasive flow. ☆ It is now available for purchase on Amazon. (A link is provided below.)

• Other flooring materials
• Geological Survey Company
• Geological Survey

【Features】 〇 This is a wet precision cutting wheel for cutting stainless steel samples. 〇 It cuts stainless steel samples cleanly with special abrasives. 〇 It is now available for purchase on Amazon. (Link below) 〇 The sizes are as follows: Outer diameter - Hole diameter - Thickness ・Φ205 - 25.4 - 0.8 ・Φ255 - 31.75 - 1.2 ・Φ305 - 31.75 - 1.2 We are currently distributing free samples. If you are interested, please feel free to contact Haruzoku Japan.

• Geological Survey
• Geological Survey Company

【Features】 〇 This is a wet precision cutting wheel designed for cutting aluminum samples. It is also proficient in cutting non-ferrous metals such as copper and titanium. 〇 The GC abrasive grains cut non-ferrous metal samples cleanly. 〇 It is now available for purchase on Amazon. (Link below) 〇 The sizes are as follows: Outer diameter - Hole diameter - Thickness ・Φ205 - 25.4 - 0.8 ・Φ255 - 31.75 - 1.2 ・Φ305 - 31.75 - 1.2 We are currently distributing free samples. If you are interested, please feel free to contact Harlzok Japan.

• Geological Survey
• Geological Survey Company

Four-Shipole TS <Features> ● Designed for stability even at low rotations. ● High-precision polishing is possible with a stable housing. Four-Shimat TS <Features> ● Automatic polishing is possible. ● Easy polishing with a holder dedicated to thin slices. ● Available in low rotation and ultra-low rotation specifications. ● Can be retrofitted.

• Geological Survey
• Geological Survey Company
• Structural Survey

Rock Cutting Machine <Features> - Capable of cutting large rock samples - Horizontal table movement allows for slicing cuts - Can accommodate wheels up to Φ300mm - Easy operation that anyone can use

• Geological Survey
• Geological Survey Company
• Structural Survey

VELOX achieves complete automation of the sample polishing process. It is a device that performs not only polishing tasks but also sample cleaning, drying, holder attachment, holder replacement, and storage of holders in racks. VELOX offers overwhelming reductions in labor hours. 【Components】 ● Flat polishing station ● Rough polishing and finishing polishing stations ● Sample cleaning and drying station ● Polishing disk exchange tower ● 8-channel automatic supply unit ● Automatic holder exchange system ● Barcode scanner 【Benefits】 ● Slim design of the smallest class (about half the size of conventional machines) ● Amazing low price (achieved by significantly cutting material costs through slimming) ● Overwhelming time savings 【Reasons to Recommend VELOX-102】 Did you know that data shows that more time is spent on tasks other than actual polishing during sample polishing? <Tasks other than polishing> ● Cleaning and drying of samples and holders. ● Removing, replacing, and storing disks. ● Managing buffs, polishing materials, and lubricants. ● Waiting time for the operator to start the next process. VELOX handles all of these tasks as well.

• Other analytical equipment

<Features> ● Automatically sets optimal parameters with the auto-scan function. ● Equipped with a cooling function to suppress the temperature rise of the chemical solution. ● Manual etching can be performed with an external etching unit. ● Expansion of the electro-polishing unit is also possible. ● Accessories such as masks and cathodes tailored to the samples are available. *For more details, please request information.

• Other analytical equipment
• others
• Geological Survey

This is a resin plate containing diamond abrasive. 【Features】 〇 A wide variety of sizes (μ) and types are available. 〇 Effective for polishing hard samples that cannot be polished with sandpaper. 〇 It can be easily attached and detached using magnets. 〇 The durability is approximately equivalent to 100 sheets of sandpaper. ☆ It is now available for purchase on Amazon. Φ200mm Diamond Plate https://amzn.to/2xVIxDN Φ250mm Diamond Plate https://amzn.to/3aFh86J Φ300mm Diamond Plate https://amzn.to/3axVFwl

• Other flooring materials
• Geological Survey Company
• Geological Survey

For polishing samples such as metals, non-ferrous metals, substrates, ceramics, and resins. 【Features】 〇 Abrasive particle sizes range from #80 to #4000. 〇 The diameter sizes are as follows: ・φ200mm ・φ223mm ・φ250mm ・φ300mm ・φ8 inches ・φ12 inches 〇 Available in various types, both adhesive and non-adhesive. ☆ You can now purchase it on Amazon. (There is a link below.) Please compare it with what you are currently using.

• Geological Survey
• Geological Survey Company

The resin is compressed and pressed to embed and mold the sample. You can choose from two models according to your application. 【Features】 ◆ The entire process of heating, pressurizing, cooling, and degassing during resin molding is performed automatically. ◆ The upper fixed cover uses a bayonet system, making it easy to remove even after the sample has been created and preventing it from becoming stuck. ◆ Mold diameters can be selected from Φ25, 30, 40, and 50 mm, as well as 1, 1-1/4, 1-1/2, and 2 inches. There is also a chamfered type ram available. ◆ Since the mold can be removed individually, multiple mold sizes can be used with a single machine. ◆ Program management is possible, allowing various embedding conditions to be retrieved with the push of a button. ◆ It is equipped with functions for "preheating" to ensure resin penetrates into fine details and "pre-pressurizing" for embedding materials like low-hardness non-ferrous metals.

• Geological Survey
• others

EcoPress allows for the easiest embedding. You can choose from three models according to your needs. We have demo units available, so if you would like a demonstration, please feel free to contact us. Online demos and on-site demos at your company are also possible. 【Features】 ◆ It automatically performs a series of processes including heating, pressurizing, cooling, and gas release. ◆ The upper fixed cover can be easily removed even after sample preparation due to the bionet system, making it less likely to become stuck. ◆ The mold can be removed individually, allowing for the use of multiple mold sizes with a single unit. *For more details, please request our materials. The catalog has been updated.

• Geological Survey
• others

■Cutting We introduce cutting stones and diamond wheels. We have original brand products such as the Meivia series. ■Embedding We introduce hot resins such as phenolic, epoxy, and acrylic, as well as room temperature resins like polyester resin (styrene-free) and epoxy resin (non-hazardous). ■Polishing We offer polishing paper, diamond plates, diamond abrasives, alumina, colloidal silica, buffs, lubricants, etc., at low prices.

• Geological Survey
• others

■Sample Cutting Machine We have the MICRACUT series of small cutting machines, the SERVOCUT series of medium and large cutting machines, and the manual METACUT, among others. *The new MICRACUT-200-S has been added.* ■Sample Embedding Machine We offer the ECOPRESS series of resin embedding machines for samples, and the VACUMET, a degassing impregnation machine for embedding with room temperature resin. ■Sample Polishing Machine Our best-selling sample polishing machines include the FORCIPOL series, the full-spec ACCURA, the fully automatic VELOX, the electrolytic polishing machine ELOPREP, and the GIGA series of vibratory polishing machines, among others. *The new VELOX-102 has been added.*

• Geological Survey

This is the top model of a sample polishing machine that can polish various samples such as metals, non-ferrous metals, substrates, and ceramics. <Features> ● Increased stability with a base and head integrated design ● Ample motor capacity specifications and a stable housing achieve precise polishing ● Equipped with almost all necessary functions as standard ● The left-right oscillation function of the head increases polishing speed, particularly effective for surface finishing.

• Other analytical equipment
• others

<Features> - Cutting and polishing of rock samples can be done with a single machine. - The cutting and polishing motors are shared, providing excellent cost performance. - Cutting and polishing can be performed while the sample is attached to a glass plate using a vacuum chuck. - Micron-level polishing is possible. - The operation is simple enough for anyone to use.

• Geological Survey
• Geological Survey Company
• Structural Survey

We will send you a free sample. If you are interested, please contact us. 【Features】 〇 This is a wet precision cutting wheel for metal cutting. 〇 It is a versatile cutting wheel made with alumina-based abrasives. 〇 We are now able to sell it at a low price due to mass production. 〇 The sizes are as follows: Outer diameter - Hole size - Thickness ・Φ230 - 25.4 - 1.0 ・Φ255 - 31.75 - 1.2 ・Φ305 - 31.75 - 1.5 * Thanks to your support, we have received very positive feedback. We plan to expand our lineup in the future, so we will also be producing sizes other than those listed above. We are currently distributing free samples. If you are interested, please feel free to contact Harlzok Japan. You can also purchase from Amazon via the link below.

• Geological Survey
• Geological Survey Company