グローバルコード List of Products and Services

During the molding of polyurethane foam, a large amount of release agent is used, but by applying alliveⓇPEEKcoat (grade AP105+AT105) to the mold, the use of release agents can be eliminated.

• paint

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coatings (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Bearing parts of precision machinery: Due to low friction, suitable for bearings in precision instruments that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as spindles of machine tools and high-speed motors. ■Automotive Industry Internal engine parts: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission parts: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Mechanical parts of aircraft: By using in sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■Energy Industry Bearings of wind turbines: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Bearings of hydroelectric power generation equipment: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• others

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, it is suitable for bearings in precision instruments that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: Used in sliding parts of movable sections and control systems of the aircraft, contributing to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: Applied to bearing parts used in underwater environments, contributing to improved power generation efficiency.

• others

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, it is suitable for bearings in precision equipment that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts within the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical components: By using it in sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• others

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: By providing low friction, it is suitable for bearings in precision instruments that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: By using it in sliding parts of movable sections and control systems of the aircraft, it contributes to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• others

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coating (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Sector Precision machinery bearings: Due to low friction, suitable for bearings in precision equipment that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: By using in sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydroelectric equipment bearings: By applying to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• others

Our company offers PEEK coatings as an alternative to PFAS and other coatings. If you are looking for ultra-low friction coatings, please consider our PEEK coatings (AP105+AT135). *Friction coefficient: below 0.035 【Industries Served】 ■Industrial Machinery Precision machinery bearings: Due to low friction, suitable for bearings in precision instruments that require high-speed rotation and fine movements. High-speed rotating equipment: Used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. ■Automotive Industry Internal engine components: By applying to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: Used on sliding surfaces of gears and bearings to enhance power transmission efficiency. ■Aerospace Industry Aircraft mechanical parts: Used in sliding parts of movable sections and control systems of the aircraft, contributing to improved fuel efficiency and reliability. ■Energy Industry Wind turbine bearings: Used in components such as main shaft bearings of large wind turbines under high load and low-speed rotation conditions. Hydropower equipment bearings: Applied to bearing parts used in underwater environments, contributing to improved power generation efficiency.

• others

If you are looking for an ultra-low friction coating, our PEEK coating (AP105+AT135) can be helpful. Friction coefficient: below 0.035 Industrial Machinery Sector Precision machine bearings: Suitable for bearings in precision equipment that require low friction for high-speed rotation and fine movements. High-speed rotating equipment: Can be used in sliding parts of equipment that require high-speed rotation, such as machine tool spindles and high-speed motors. Automotive Industry Internal engine components: By applying it to sliding parts inside the engine, such as piston rings and valve guides, it contributes to improved fuel efficiency and performance. Transmission components: By using it on the sliding surfaces of gears and bearings, it enhances power transmission efficiency. Aerospace Industry Aircraft mechanical parts: By using it on the sliding parts of movable sections and control systems of the airframe, it contributes to improved fuel efficiency and reliability. Energy Industry Wind turbine bearings: Suitable for components used under high load and low-speed rotation conditions, such as the main shaft bearings of large wind turbines. Hydropower equipment bearings: By applying it to bearing parts used in underwater environments, it contributes to improved power generation efficiency.

• others

A complaint about the fluorine coating peeling off occurred in the inner pot of a domestic rice cooker manufacturer. Since switching to PEEK coating about 20 years ago, there have been no complaints regarding peeling paint or similar issues; it is a coating that has excellent adhesion to metals.

• others

PEEK (polyether ether ketone) resin is powdered and then dissolved in water to enable coating, which is known as PEEK coating. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. PEEK coating has existed for over 20 years. However, coating companies have stated that "the quality of those PEEK coatings was not very good, particularly due to the issue of liquid dripping on the coated surface, making painting and firing difficult." Allive® PEEK coating, handled by Global Code as the exclusive distributor, can be applied and fired, and as of now, it has already begun to be introduced and tested in various industries such as food, automotive, and electronic components.

• others

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be added. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. [Features] ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, organic solvents, etc., as a chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'alliveⓇPEEKcoat' was tested and adopted for bolts in marine plants. In the bolts of marine plant equipment, there were issues with corrosion and rusting of parts. Our alliveⓇPEEKcoat was evaluated as capable of satisfying performance requirements. 【Case Overview】 ■Issues - Corrosion and rusting of parts ■Results - After 2000 hours of salt spray testing, the results were satisfactory. *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK Coating' was adopted for kitchen sink units. There were no paints available that allowed for painting on stainless steel for sink bowls and range hoods. With its adoption, the paintability on stainless steel has improved. 【Case Overview】 ■Challenges - Diversification of color design - No paint available that allows for painting on stainless steel ■Results - Coloring on stainless steel has become possible - Paintability on stainless steel has improved *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK coating' was adopted for shoe sole molds. In the case of sole molds, there was a challenge to reduce the use of release agents due to environmental issues. With its adoption, the release properties improved, and it has become a long-standing achievement for major shoe manufacturers. 【Case Overview】 ■Challenge - Reduction of release agent usage due to environmental issues ■Results - Improved release properties - Established a long-standing track record for major shoe manufacturers *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK coating' was adopted for bread loaf molds. In bread loaf molds, the durability of the mold coating (silicone, fluorine) was short, requiring frequent recoating, and there were issues with the release properties from the bread. With the adoption of the coating, there was no peeling, and both the release properties and coating durability improved, leading to an increase in bread yield. [Case Overview] ■ Issues - The durability of the mold coating was short, requiring frequent recoating. ■ Results - No coating peeling, and the coating durability improved (release properties were also not an issue). - Increased bread yield. *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK coating' was adopted in a food manufacturing line. In the food manufacturing line, there were issues with sticking of frozen udon noodles, potato salad, etc., as well as the peeling of fluorine coatings on manufacturing containers and molds. With the adoption of the coating, the non-stick effect of PEEK paint significantly reduced equipment cleaning time and improved adhesion to stainless steel. 【Case Overview】 ■Challenges - Reduction of sticking for frozen udon noodles, potato salad, etc. - Peeling of fluorine coatings on manufacturing containers and molds ■Results - Significant reduction in equipment cleaning time - Dramatic improvement in durability *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK coating' has been adopted in cooking appliances. There were issues with the peeling of the fluorine coating in rice cooker inner pots and the challenges of fluorine alternatives due to PFAS regulations. By adopting this coating, we were able to obtain FDA approval in the U.S. and comply with Japan's Food Sanitation Act, leading to long-standing success in rice cooker inner pots. [Case Overview] ■Challenges - Peeling of the fluorine coating in rice cooker inner pots - Fluorine alternatives due to PFAS regulations ■Results - Long-standing success of rice cooker inner pots *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case where our 'PEEK Coating' was adopted for automotive-related seat molds and painting jigs. The company faced the challenge of eliminating the use of release agents in epoxy resin and foamed urethane filling molds due to environmental issues. With the adoption of our coating, the release properties improved, leading to a reduction in the use of release agents, which in turn reduced the burden on the environment and human health, as well as improved work efficiency. 【Case Overview】 ■ Challenge - Elimination of release agents due to environmental issues ■ Results - Improved release properties and reduced use of release agents - Reduced burden on the environment and human health, and improved work efficiency *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce a case study on the introduction of our 'PEEK coating' for automotive motor molds. In automotive motor molds, there was a demand for the elimination of release agents due to environmental issues and resistance to alkaline release agents in applications such as sheet molds and painting jigs. By implementing this coating, we achieved both a reduction in environmental impact and an improvement in work efficiency. Additionally, this coating has been introduced in bread molds, frozen food production lines, and cooking appliances. For more detailed information, please refer to the related links. 【Case Overview】 ■Challenges - Elimination of release agents due to environmental issues - Resistance to alkaline release agents ■Results - Achieved reduction in environmental impact and improvement in work efficiency *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce the types and characteristics of our product 'alliveⓇPEEKcoat'. Our coating products are designed to exhibit suitable performance according to their applications. AP105 can be used alone as a base coating. If higher performance is required, using AT135 (fluorine-free) or AT105 (fluorine content below 20%) as a topcoat can further enhance performance. 【AP105 Specifications (partial)】 ■Type: Base ■Particle size (um): 20 ■Specific gravity: 1.3 ■Color: Black ■Hardness (pencil hardness): 9H *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce the advantages of our product, 'alliveⓇPEEKcoat'. When compared to other coating materials, it is clear that our coating surpasses others in wear resistance, chemical resistance, heat resistance, and insulation properties. In terms of non-stick properties, it demonstrates high performance, second only to fluorine coatings, and there are many cases where this coating, which excels in wear resistance in various environments, lasts a long time. 【PEEK AP105 Specifications】 ■ Continuous use temperature: 260℃ ■ Hardness: 9H ■ Presence of pinholes: None *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce our product, 'alliveⓇPEEKcoat'. It excels in wear resistance, chemical resistance, heat resistance, insulation, and non-stick properties. By applying it to molds and firing it, we can achieve a significant increase in mold lifespan and eliminate the hassle of re-coating, thereby improving production efficiency and reducing costs, with various benefits expected. Additionally, in anticipation of the PFAS regulations expected to come into effect by 2028, considering a transition to this coating now can help avoid future risks and establish a sustainable production system. 【Features】 ■ Excellent wear resistance, chemical resistance, heat resistance, insulation, and non-stick properties ■ Significant improvement in mold lifespan ■ Achieves improved production efficiency and cost reduction *For more details, please download the PDF or feel free to contact us.

• others

"PEEK Coating" is an innovative surface treatment technology that uses the high-performance resin PEEK. This technology, which has a long history, has been significantly improved through advanced research and development, overcoming the traditional challenges of application difficulty and achieving high-quality finishes with a simple application and firing process. The "allive(R) PEEK coating," which we handle as the exclusive distributor, is currently being widely introduced and trialed in various industries, including food, automotive, and electronic components. 【Products Offered】 ■ 100% PEEK (Fluorine-free): Extremely high wear resistance and chemical resistance ■ Less than 20% Fluorine: Extremely high non-stick properties *For more details, please download the PDF or feel free to contact us.

• others

"alliveⓇPEEKcoat" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it offers various benefits such as significantly extending mold life and eliminating the hassle of re-coating. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold life and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, organic solvents, etc., as a chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• others

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be added. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Lineup】 ■ 100% PEEK (fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% fluorine-containing (low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• others

The "PEEK Coating" is a product that allows for coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, which enhances the performance of the PEEK resin. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Lineup】 ■ 100% PEEK (fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% fluorine-containing (low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• others

"PEEK Coating" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened by firing, allowing the performance of PEEK resin to be added. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other benefits. 【Lineup】 ■ 100% PEEK (fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% fluorine-containing (low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• others

"alliveⓇPEEKcoat" is a product that enables coating by powdering PEEK (polyether ether ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing for the addition of PEEK resin's properties. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it on molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Product Lineup】 ■ 100% PEEK (fluorine-free, extremely high wear resistance and chemical resistance) ■ 20% fluorine-containing (low fluorine, extremely high non-stick properties) *For more details, please download the PDF or feel free to contact us.

• others

Global Code Co., Ltd. is a trading company that conducts business on a global scale. Founded in 2015, initially focusing on business between Japan and South Korea, our company has expanded its target to encompass the entire planet. Our mission is to connect countries and people on a global scale through the treasure of products, leading our customers' businesses to success. [Business Activities] ■ Export Business ■ Import Business ■ OEM Business ■ Cross-Border E-Commerce *For more details, please refer to the related links or feel free to contact us.

• others