ニュージャパンヨット List of Products and Services

We would like to introduce the "THULE Step Slide-Out LED Kit (Optional)" that we handle. This LED tape can be added to slide-out type steps. It gently illuminates your feet, making it safer to get in and out at night. With a high waterproof rating of "IP67," it is resistant to rain, dirt, dust, and debris, providing peace of mind. Please feel free to contact us if you have any requests. 【Features】 ■ Tape length: 700mm ■ Can be cut to fit the length of the step ■ Specifications/Size: 12V, length 700mm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Step 12V Double (2-step type)" that we handle. This is a convenient 2-step electric step for vehicles with a high floor. Made of aluminum, it is extremely lightweight at just around 7 kg. The dimensions for the Double 380 on the STU size are S: 380, T: 435, U: 410 (mm). Please feel free to contact us if you have any requests. 【Features】 ■ Made of aluminum ■ Three width types *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our product, the "THULE Slide Step 12V Installation Kit Set for Ducato." This high-performance THULE RV step is compatible not only with Ducato but also with Jumper and Boxer models. It features a fully horizontal sliding step, which is useful when an additional step is needed, even if the vehicle height is not very high. Additionally, if there is no power source available, it can be easily removed manually without the use of tools. 【Features】 ■ A thoughtful multifunctional cable outlet that prevents moisture and dust intrusion ■ Built-in brush that effectively prevents dust ■ Anti-slip strip that enhances safety when entering ■ Safe design with rounded edges on the front ■ Footboard made of anodized aluminum with a wave pattern ■ Strong and lightweight material *For more details, please refer to the PDF document or feel free to contact us.

• others

The "THULE QuickFit" is a product that features a one-piece panel, making it easy to understand, and it can be quickly and easily deployed without the need for any pillars or poles for setup. Installation is done by utilizing the mounting rail (sold separately) located under the awning body and the groove in the front profile of the awning to hang it up. Since there is an additional ceiling created under the awning fabric, it helps to mitigate the greenhouse effect, providing high advantages in both insulation and ventilation. 【Features】 ■ Stylish front canopy (overhanging roof) at the front ■ Blocks sunlight and rain over a wider area ■ Includes wind strip and wheel cover to cover the underside of the vehicle and tires ■ Made of PVC material *For more details, please refer to the PDF document or feel free to contact us.

• others

The roof is completely sealed by the side panel installation and the clamp frame that connects to the awning fabric. The space between the mast frame and the clamp frame is reinforced with braces, making it very stable. The area between the vehicle's outer wall and the side panel is sealed with an adjustable double rubber flap mast frame. The spacious windows provide a sense of openness and excellent light transmission. Doors are equipped on both the left and right sides of the front. Ventilation openings on both sides allow for adequate airflow even when the tent is closed. Additionally, the two side windows come with insect screens. The roll-up side and front panels make it easy for people to enter and exit. The front panel of the tent is equipped with an optional rail for attaching additional accessories. The sides and front are made of high-quality PVC material. The front panel and side panels must be ordered separately. A wind slip is included to seal the bottom of the vehicle (wheel covers sold separately). A special model is also available for installing the Thule Omnistor 5102 awning on Volkswagen T5/T6.

• others

We would like to introduce the "THULE Mosquito Side" that we handle. This is a zipper-type insect net that prevents dirt and pests from entering, compatible with various models of Thule Quick Fit. It comes in a single piece. This product is for side panels. Please feel free to contact us if you have any requests. 【Features】 ■ For side panels ■ Prevents dirt and pests from entering ■ Zipper-type *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Mosquito Front" that we handle. This product is for the front panel that attaches to the front. It is a zipper-type insect net that prevents dirt and insects from entering, compatible with various models of Thule Quickfit and Thule Panorama tents. Please feel free to contact us if you have any inquiries. 【Features】 ■ For front panel attachment ■ Prevents dirt and insect intrusion ■ Zipper type *For more details, please refer to the PDF document or feel free to contact us.

• others

This is a part for the THULE Omnistor awning. It is an important part that allows you to insert the crank handle and rotate the awning. It is compatible with the 5002/5003/5200 series. If you hear rattling or unusual noises during retraction, or if it does not retract smoothly, replacement is necessary. *Please make sure to secure the awning with a rope before performing the gear replacement to prevent it from extending unexpectedly.

• others

This is a part for THULE Omnistor awnings. It is the vehicle-side bracket used when the support arms (legs) are not standing on the ground but are braced against the vehicle. Sold as a left and right set. Compatible with all series. Available in "White" and "Black" to match the vehicle.

• others

This is an assembly of a telescopic "leg." It includes the locking part. It is a common part for both left and right, suitable for awnings (5200) made after 2009.

• others

This is an assembly of a telescopic "leg." It is a common part for both left and right, designed for model 6300.

• others

A waterproof flexible LED tape light using 60 high-brightness LEDs per meter. It can be easily installed by simply adhering it with 3M double-sided tape. The roll length is 5 meters, and it can be freely cut at 5 cm intervals, allowing for a perfect fit in the desired location (dot mark interval). A 1-meter power cord is included, but there is no switch. The 5200 series looks smart when adhered to the separately sold "tent/LED compatible mounting rail."

• others

The tip is T-shaped and cannot be used with other companies' awnings. It can be adjusted in length with a screw mechanism to your preferred length. There are two types of lengths available, so please choose one.

• others

This is a part for THULE Omnistor awnings. Sold as a set of 2. (Standard included with series 5003, 8000, 6200, 6900)

• others

It is 1 roll (30m). The cutting is done in 1m units. *Not usable for 2000 and CARAVAN-style series.

• others

Made of soft PVC with double-sided tape. The bottom is designed to allow rainwater to flow into the drain. It comes in a set of four pieces (plus two connecting pieces) with a height of 10 cm (effective 7 cm) and a length of 92 cm, suitable for awnings up to 3.5 m. Please cut and paste while avoiding the adapter part.

• others

Combine the two poles, tension them, and tighten the awning to provide tension. Mounting brackets for each series are included.

• others

It comes with two black straps (each 3m) and mounting hardware. It can also be used with the 2000 CARAVAN-style series.

• others

It is easy to set up by simply threading the end of the side awning into the groove and pegging down the lower end. It can be used with the feeling of extending the awning. (Includes pegs and ropes) Made from high-durability PVC material, it blocks rain, wind, and sunlight. Even during light rain, it creates a comfortable living space that doesn't get damp and is not affected by the surrounding gaze. The height of the fabric is 1.4m for all types. It is compatible with all types of Omnistar awnings, and you can choose from six types according to the length of the awning.

• others

You can slide between the grooves of the awning, expanding usability. It can also be used with Fiamma awnings. It can be hooked onto the separately sold "Ladder FIX Kit."

• others

It is a simple installation that only requires changing the left end plate to one with a motor. The wiring is straightforward and easy through the included control box. You can extend and retract the awning with a simple switch operation. The colors available are white, silver, and black, matching the awning body. In case of any issues with the power supply or motor, a "crank handle adapter" for manual operation is also included for peace of mind. *It can also be operated with a ratchet fitted with a 5mm socket, not just with a crank handle. *Compatible with the 5200 series, from 3m to 5m. (Not compatible with 1.9m to 2.6m.)

• others

Unlike the latest hold side down kit, this type is not mounted to the left and right pillars but is designed to hook onto the awning's extending arm as shown in the photo. Wind is the arch-nemesis of side awnings. We recommend taking wind precautions as soon as you extend the awning, even on the calmest days. This hold down kit attaches a belt to the spring arm of the awning and secures it by pegging it down. It is compatible with awnings up to 6 meters, but please cut the belt according to the length of your awning. *Do not extend the awning during strong winds.

• others

Compatible with all Thule Omnistor awning products (excluding the 5000 series). Installation involves sliding the fabric and inserting it into the front frame. Length: Minimum 2.40m to Maximum 4.80m, height is 1.7m for all types. All panels can be folded and secured with side release buckles. Durable screen fabric made of hollow fiber material (mesh). Various combinations with different panels are possible.

• others

We would like to introduce the "5200 Series Dedicated Tent and LED Combined Mounting Rail" (optional) that we handle. This is a mounting rail that can be installed on the wall surface under the awning, featuring a groove for sliding the quick fit. Sizes available are 3.0m, 3.5m, 4.0m, and 4.5m in length. The material is aluminum. 【Overview】 ■ Sizes: 3.0m, 3.5m, 4.0m, 4.5m ■ Material: Aluminum *For more details, please refer to the PDF document or feel free to contact us.

• others

Easy installation by simply inserting it into the "diagonal keyhole" on the front lead rail and lowering it. It provides a stronger fixation to the ground. Compatible with the 5002, 5003 series, and 6000 series (comes with a mounting base for the 6000 series). If using with the 5200 series, a separate part is required. Please inform us at the time of purchase. *Can only be used with awnings of 3.75m or more. However, it is not applicable for use with the 4900 and Caravan series. *Do not extend the awning during strong winds.

• others

We would like to introduce our product, the "Tent and LED Compatible Mounting Rail for 6300 Series <Set of 3>." This is a mounting rail that can be used for both tent installation and LED installation, compatible with the 6200/6300/9200 series. It comes as a set of three 1.3m rails that slide in from the side to be installed at the bottom edge of the awning, accommodating lengths of up to 4.0m. Additionally, the LED can be used whether the awning is closed or open. 【Features】 ■ Color: Black ■ Compatible for tent installation ■ Accommodates lengths up to 4.0m *For more details, please refer to the PDF document or feel free to contact us.

• others

A set of 1m x 6 pieces that can be installed by sliding from the side at the bottom edge of the awning (compatible with lengths up to 6.0m). The LED can be used whether the awning is closed or open. *Note: Please ensure there is enough space for installation between the awning body and the vehicle.

• others

We would like to introduce the "Tent Mounting Rail (1.3m x 3 pieces) <for 6300 series only>" that we handle. This is a tent mounting rail for the 6200/6300/9200 series. It comes in a set of three 1.3m pieces that slide in from the side to be attached to the bottom edge of the awning, accommodating lengths up to 4.0m. Please feel free to contact us if you have any requests. 【Features】 ■ For 6200/6300/9200 series ■ Slides in from the side to be attached to the bottom edge of the awning *For more details, please refer to the PDF document or feel free to contact us.

• others

It is a simple installation that only requires changing the left end plate to one with a motor. The wiring is straightforward and easy through the included control box. You can extend and retract the awning with a simple switch operation. The colors available are white, silver, and black, which can be chosen to match the main body of the awning. In case of any trouble with the power supply or motor, a "crank handle adapter" for manual operation is also included for peace of mind. *It can also be operated with a ratchet equipped with a 5mm socket, not just with a crank handle. *The 6300 series is compatible with sizes from 3m to 5m. (Not compatible with 1.9m to 2.6m.)

• others

Tension is applied to the awning fabric to enhance wind resistance. It is standard equipment for awnings longer than 4.02 m. For awnings measuring 3.02 m and 3.52 m, it can be added as an option. Contents: Set of 2 tension arms. *For more details, please refer to the PDF document or feel free to contact us.

• others

The clamp can be easily attached to most rafters with a universal fitting, and installation is simply a matter of sandwiching the fabric and tightening the handle. Up to two clamps can be used on one side of the awning. Each set includes two pieces. Compatible products: Oval Side Blocker Rafter, Thule Tension Rafter G2, Square Telescopic Tension Rafter for Thule Omnistor 1200. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "THULE Elite Van XT (Black)" is a dedicated bike carrier specifically designed for Euro campers with "barn doors" at the rear, such as the "Ducato." It is fixed using clamps and adhesive, eliminating the need for drilling holes in the vehicle. The height of the bike rail platform can be selected from three levels, allowing for a user-friendly height. The carrier can be easily removed from the vehicle mounting plate, and the rubber seal strip maintains a clean appearance. 【Overview】 ■ Compatible with Fiat Ducato, Citroen Jumper, Peugeot Boxer, and Ram Pro Master from 2007 onwards ■ Adjustable width in 3 stages ■ Maximum load capacity of 35kg for up to 2 bikes (not suitable for carrying more than 3 bikes) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 2-Bike" that we handle. This is Thule's standard 2-bike carrier. By adding optional rails, it can be expanded to carry 3 bikes. It is a type that securely attaches to the rear wall of a motorhome or caravan, equipped with a new cycle holder that allows for the installation of locks. 【Overview】 ■ Maximum load capacity: 50kg ■ Size ・Height: 80-150cm ■ Weight: 8.2kg ■ Maximum weight of a bike: 19kg ■ Number of bikes that can be carried: 2 bikes (expandable to 3 bikes with optional rail addition) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 2-Bike Short" that we handle. This product is suitable for cars with limited mounting space. By adding optional rails, it can be expanded to carry 3 bikes. It is equipped with a new type of cycle holder that allows for the installation of locks. This product is designed to be securely mounted on the rear wall of motorhomes or caravans. 【Overview】 ■ Maximum load capacity: 50kg ■ Size ・Height: 40–70cm ■ Number of bikes that can be loaded: 2 bikes (expandable to 3 bikes with optional rail addition) ■ Maximum weight per bike: 19kg *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 Tour" that we handle. It can be installed on cars with a curved rear panel or in places where the "Omni Bike Plus" was originally attached. By adding rails (optional), it can be expanded to accommodate up to 3 bikes. Additionally, it is equipped with a new type of cycle holder that allows for the installation of locks. 【Specifications (partial)】 ■ Installation location: Rear wall ■ Number of bikes that can be loaded: 2 (3) ■ Maximum load capacity per bike: 19kg ■ Maximum tire width: 2.1 inches ■ Spacing between bikes: 30cm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 HOBBY" that we handle. It can be mounted on the rail above the rear window of the trailer. By adding a rail, it can be expanded to accommodate up to 3 bikes. Additionally, it does not interfere with the "Window Awning W-150," so there is no need to remove it. 【Size/Specifications】 ■ Maximum tire width: 2.1 inches ■ Spacing between bikes: 30 cm ■ Total width: 126 cm ■ Depth: 65 cm ■ Weight: 6.8 kg *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 Universal" that we handle. It can be mounted on the rail above the rear window of the trailer. There is no interference with the "Window Awning W-150," so there is no need to remove it. Additionally, by adding rails, it can be expanded to accommodate up to 3 bikes. 【Specifications】 ■ Maximum tire width: 2.1 inches ■ Spacing between bikes: 15 cm ■ Overall width: 126 cm ■ Depth: 65 cm ■ Weight: 8 kg *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport Garage" that we handle. This is a bike carrier that can be installed on the floor of your vehicle. When not in use, the rack can be folded away. By adding rails, it can be expanded to accommodate up to 4 bikes. Please feel free to contact us if you have any requests. 【Specifications (partial)】 ■ Installation location: Garage ■ Number of bikes that can be loaded: 2 (3) (4) ■ Maximum weight per bike: 19kg ■ Maximum tire width: 2.1 inches ■ Spacing between bikes: 30cm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "THULE Sport G2 Compact (for Swing Doors)" that we handle. This is a bike carrier designed for swing doors. You can open and close the door even with the bike loaded. It is primarily designed for installation on the right door, but it can also be installed on the left door. Please feel free to contact us if you have any inquiries. 【Features】 ■ Bike carrier ■ Allows door opening and closing with the bike loaded ■ Primarily designed for installation on the right door, but can also be installed on the left door * For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Top Mounting Rail (Optional)" that we handle. By using this mounting rail with the THULE bike's upper mounting bracket, it is possible to distribute the load on the vehicle and conceal the mounting screws. It also looks neat and helps prevent theft. Please feel free to contact us if you have any requests. 【Features】 ■ Distributes the load on the vehicle ■ Conceals the mounting screws ■ Looks neat and helps prevent theft *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the "3rd Rail + Bike Holder (Optional) for Sport G2" that we handle. This is an additional bike rail for the Sport G2. By adding it, you can expand to accommodate 3 bikes. One bike holder is also included. Please feel free to contact us if you have any inquiries. 【Features】 ■ Additional bike rail for Sport G2 ■ Can be expanded to accommodate 3 bikes ■ One bike holder included *For more details, please refer to the PDF document or feel free to contact us.

• others

The "THULE Veloslide" is a convenient sliding rack for loading bicycles into garage compartments (cargo areas) and more. Unlocking is as simple as lightly gripping the handle, allowing for one-handed operation. It can slide not only forward but also backward, making access to other cargo easy. Additionally, the sturdy rack can support up to 70 kg with two bikes and slides 1.5 meters, allowing for loading and unloading of bicycles while standing. 【Features】 ■ Uses a "mounting rail" (sold separately) for installation - The main unit can slide left and right ■ Secure the bike by placing the tires on the wheel holders and using the pumping buckle strap ■ Simply grasp the frame with the bike holder to complete the setup *For more details, please refer to the PDF document or feel free to contact us.

• Car and bicycle parking facilities

We would like to introduce the "Mounting Rail for Veloslide 70cm" that we handle. This is the mounting rail necessary for installing the "Veloslide," which allows the main unit to slide horizontally. You can cut it to the desired length as needed. It is also possible to leave only the rail and remove just the main unit. Please feel free to contact us if you have any requests. 【Features】 ■70cm (set = 3 pcs) ■Necessary for installing the "Veloslide" ■Allows the main unit to slide horizontally *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Mounting Rail for Veloslide 140cm" that we handle. This is the mounting rail necessary for installing the "Veloslide." With this product, you can slide the main unit horizontally. Additionally, it allows you to leave only the rail and remove the main unit. You can cut it to the desired length as needed. 【Features】 ■140cm (set = 3pcs) ■Allows you to leave only the rail and remove the main unit ■Can be cut to the desired length as needed *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Bike Holder G2 with Key Lock." This is the initial version of the bike holder for φ30 pipes. The size refers to the center-to-center length between the pipes. Please feel free to contact us if you have any inquiries. 【Features】 ■ For φ30 pipes ■ Size refers to the center-to-center length between the pipes *For more details, please refer to the PDF document or feel free to contact us.

• others