ニュージャパンヨット List of Products and Services

● In narrow and enclosed spaces such as campers, yachts, and boats, it is necessary to prepare for unexpected situations involving invisible propane gas and other hazards. ● Since propane gas is heavier than air and tends to accumulate at lower levels, please install it between 20 to 40 cm above the floor. It can also be set to respond to "soporific gas," helping to protect you from crime. ● In addition to the built-in alarm buzzer, it is possible to link another external device (sold separately) such as a buzzer. ● With the included frame, installation can be completed with just this set. Additionally, with the included spacer (base), it can be installed on the surface without embedding.

• others

● In confined and enclosed spaces such as campers, yachts, and boats, it is necessary to prepare for unexpected situations involving colorless, odorless carbon monoxide. ● The installation location is very important. It is usually installed at a height corresponding to the average human nose (150-200 cm from the floor). If installing in a bedroom, please place it at the height where you will be breathing while sleeping. ● In addition to the built-in alarm buzzer, it is possible to connect another external device (sold separately) such as a buzzer. ● With the included frame, installation can be completed with just this set. It also comes with a spacer (base), allowing for surface mounting without embedding.

• others

● A convenient water supply inlet for vehicles that allows direct filling into the water tank. ● Equipped with a door that can be key-locked, providing peace of mind against tampering. ● Comes with a hose joint that allows connection of an air vent hose from the tank. ● Inside the door, there is a secure water supply inlet with a cap. The air vent features an insect-proof mesh. ● The hose joint has a two-stage design with diameters of φ30-φ34. The air vent is φ12.5mm.

• others

It is a single switch with an LED that clearly indicates ON-OFF.

• others

It is a single switch with an easy-to-understand ON-OFF LED.

• others

Just snap it on from above the module. It will hide the screws of various modules.

• others

Various seat blocks from the Italian fitting manufacturer VIADANA Without bearings *Not a "Universal 3-Way Head."

• others

Various seat blocks from the Italian fitting manufacturer VIADANA ● Convenient universal 3-way head that allows you to change the orientation of the shackle

• others

Various seat blocks from the Italian fitting manufacturer VIADANA ● Convenient universal 3-way head that allows you to change the direction of the shackle

• others

Various seat blocks from the Italian fitting manufacturer VIADANA ● Convenient universal 3WAY head that allows you to change the direction of the shackle

• others

Various seat blocks from the Italian fitting manufacturer VIADANA ● Convenient universal 3-way head that allows you to change the direction of the shackle

• others

Various seat blocks from the Italian fitting manufacturer VIADANA ● Convenient universal 3-way head that allows you to change the orientation of the shackle

• others

●Instead of the commonly used 18-8 (304 stainless steel), we use a more rust-resistant 1mm thick, 18-10 marine-grade stainless steel. ●Ideal for handwashing and washbasins. It features a beautiful mirror finish made from a different quality of stainless steel. Please choose the drainage direction with the separately sold drain fittings.

• Washbasin, hand washing basin, sink

Ideal for handwashing and washbasins. It features a beautiful mirror finish with a different quality of stainless steel.

• Washbasin, hand washing basin, sink

A double sink that I absolutely recommend if you have enough space. It has the same size on both sides, providing ample room.

• Washbasin, hand washing basin, sink

● Ideal for handwashing and washbasins. It deepens from the front to the back. Beautiful mirror finish. Please choose the drainage direction with the separately sold drain fittings.

• Washbasin, hand washing basin, sink

For the "under-counter sink" installed under the counter top, the flange is flat and unfinished. Please use "blocking" to sandwich the flange under the counter, or press it upwards with screws, and adhere it with silicone.

• Washbasin, hand washing basin, sink

● It is a "finger hole" opened in a door made by hollowing out teak and muk wood. ● When used in combination with the "elbow catch" below, it creates a door with a flush knob, which has been used for marine purposes for a long time. ● It is also convenient as a "finger grip hole" for a drop lid.

• others

● The door latch, also known as "Pigeon Latch" because it resembles a pigeon. ● Recommended for classic marine-style interiors. ● Attach it to the back of the door and insert your finger from the lower "cheek ring" to unlock it.

• others

●This is a luxurious universal knob made from carved teak wood. It can be used as a knob for doors and drawers, as well as a coat hook. ●It has a matte clear finish. *Please prepare separate mounting screws (M4) according to the thickness of the door.

• others

● This is the world's best-selling electric marine toilet, featuring a clean-looking white glass-like porcelain bowl and beautifully luxurious enamel-coated seat and cover. ● It can be installed above or below the waterline, and the flush pump can lift water up to 1.2 meters. ● Available in both compact and large sizes, with options for 12V and 24V. ● The flush pump uses a flexible impeller. ● It is equipped with a stainless steel shaft and brush motor. ● The base can rotate 90 degrees, allowing you to adjust its orientation to fit your installation space. * The main water intake is φ16mm, but a conversion part for φ19mm is included. * The main drainage outlet is φ25mm, but a conversion part for φ38mm is included. (Please prepare a φ25mm hose with the necessary inner diameter to connect to the conversion part.)

• Outdoor toilet unit

● The motor section is completely sealed, and the impeller blades use a new type of powerful four-blade design, making it the latest model of grinding pump. ● It is equipped with a dry run prevention feature, designed to cut off the pump's power before the impeller is damaged.

• pump

● This is an ultra-thin LED light with a thickness of only 10mm, designed for direct mounting without the need for embedding. ● It can be installed safely without protruding from ceilings, under hanging cabinets, or in bunk bed areas. * It features an ON/OFF touch switch that activates with just a touch on the lens. It has a memory function that restores it to the state it was in when the main battery was turned on/off.

• Downlight

● This is a single cam cleat that can be freely combined with an angle base or fairlead according to the place and purpose of use. ● The cam section is equipped with dual-layer Delrin ball bearings, which evenly distribute strong tension and prevent twisting. ● The newly designed stainless steel spring has undergone durability testing for over 50,000 cycles, maintaining a pleasant grip. ● The calculated round edge cam makes it easier to bite into the sheet without causing damage. * Mounting bolts (countersunk) are not included. * Please do not overtighten the bolts during installation.

• others

● This is a fairlead for mooring lines and anchoring of the parallel straight type. ● Made of thick and sturdy stainless steel using lost-wax casting. ● It can be used on both port and starboard sides due to its symmetrical design without any twists.

• others

●This is the world's only folding cleat that can be opened and closed while holding a rope, awarded the Pittman Innovation Awards by Sail magazine. ●When the arm closes, there is no risk of other ropes getting caught or tripping, and it can also be used as a "footrest" for deck work. ●It allows for smooth opening and closing even under load, with a built-in ceramic ball lock that maintains that state. ●Additionally, it does not require any digging into the deck like a "pop-up cleat," and features a simple installation with just four bolts. ●The rounded, smooth body is gentle on ropes and has a finish that is resistant to scratches and corrosion. ●Colors available are black and silver. *There are types available for up to 70ft (four types in total). Please inquire for more information.

• others

This is a plate-type ice strap made of "316 stainless steel," which is one rank higher than "304." Available in three sizes: small, medium, and large.

• others

● It is a long type with 4 holes that allows for a more secure installation. ● Made of 316 stainless steel.

• others

● This is a side-mounted, three-stage drawer rail with a load capacity of 35 kg. It offers a soft and quiet experience thanks to the action of ball bearings and rubber bumpers. ● The clips on the side of the rail allow for easy one-touch removal and attachment of the drawer. The rails come in various lengths to accommodate all types of cabinets.

• others

● This is a "full overlay" type hinge that completely covers the edge of the cabinet. The opening angle is 105°. ● After installation, you can easily make fine adjustments in the vertical, horizontal, and depth directions by simply turning the adjustment screw with a screwdriver, without touching the door. * Please specify whether you want with or without a catch when placing your order. The "washer plate" is sold separately. Please refer to the following ordering method and choose the height of the "washer plate."

• others

● This is a "half-cover" type hinge that completely covers the edge of the cabinet door. The opening angle is 105°. ● After installation, you can easily make fine adjustments in the up, down, left, right, and depth directions by simply turning the adjustment screw with a screwdriver, without touching the door. * Please specify whether you want with or without a catch when placing your order.

• others

● This is an "inset" type hinge that covers the edge of the cabinet. The opening angle is 105°. ● After installation, you can easily make fine adjustments in the vertical, horizontal, and depth directions using a screwdriver to turn the adjustment screw, without touching the door. * Please specify whether you want it with or without a catch when placing your order.

• others

● This is a fall prevention net that prevents items from falling from cabinets and overhead shelves. It is essential for yachts and campers, but it also serves as a useful item for earthquake preparedness in stores and homes. ● Simply attach the included plastic rail to the wall and insert the "zipper sliders" sewn into both ends of the net into the groove for easy installation. ● The net can be removed at any time, making it convenient. ● It can also be directly attached to the wall and used as a "wall storage net." ● Made with high-quality netting from a German "seatbelt manufacturer," it incorporates DuPont's highly elastic polyurethane synthetic fiber [spandex], which is commonly used in swimwear and sportswear. (Patent pending) Fall prevention and trip prevention net kiiper mini ● Easy installation by simply attaching the included plastic rail to the wall and inserting the net. ● It can be used not only for preventing falls from cabinets but also as a regular wall storage net. ● There is a [complete set] that accommodates cabinet widths of approximately 32cm to 40cm, and a [DIY set] that allows for custom lengths.

• others

● After spraying, leave it for 1 to 2 minutes, then scrub it off with a brush or hard sponge. ● It is a biodegradable, non-flammable, environmentally friendly stripping cleaner that does not contain preservatives or hazardous substances like methylene chloride. ● Moreover, it is odorless and can be rinsed off with water. ● It is also capable of removing dirt and stains from wooden surfaces such as teak. *Delivery to Okinawa and remote islands will be by ship, so it will take about 7 to 10 days to arrive.

• others

● We custom manufacture various tanks made of FRP that can be forced into constrained spaces (available from one unit). ● Unlike stainless steel, there is no worry about rust or water leakage, making them safe to use indoors and outdoors. ● We also accept the installation of various fittings such as air vents, water level sensors, and inlet/outlet inspection ports. ● We can accommodate requests for flange installation for mounting. * Please note that there is an odor from FRP, so it is not suitable for drinking water. * It is not suitable for fuel tanks. - Please let us know your desired size, use, and any special requirements.

• others

The drag resistance in a closed state is very small, providing advantages during sailing, and minimizing entanglements with "weeds" and ropes. During sailing: The blades are automatically closed while sailing. To keep the blades in a closed position, the shift lever should be put in reverse to lock the shaft. When going forward: By putting the shift lever in forward, the blades will automatically open to the forward position. To switch from "overdrive" to normal forward, the shift lever should be put in neutral and the boat's speed reduced to about 1 knot, allowing the blades to close before shifting back to forward. When going in reverse: The blade position in reverse is 180 degrees from the forward position, and since it uses the same shaped edge, it is very efficient even in reverse. Forward overdrive: The overdrive function is achieved by first putting the boat in reverse and then shifting the lever to forward while keeping the propeller in reverse. This allows for a more powerful forward thrust while maintaining the blade state of reverse.

• others

Typical delivery time: Approximately 7 to 10 days. * The minimum clearance between the hull and the propeller should be about 10% of the diameter. * Returns or exchanges due to size differences cannot be accommodated. - For engines not listed, please use the measurement site. If you have concerns about size, please be sure to check the appropriate size on the propeller measurement site below. ■ For sailing yachts, underwater resistance, which greatly affects speed, must be minimized as much as possible. The Gori folding propeller significantly reduces underwater resistance to about 1/10 compared to fixed propellers. ■ The Gori folding propeller automatically adjusts to the optimal blade angle based on centrifugal force, fluid dynamics, weather, and sea conditions, providing full power output in both forward and reverse. ■ It is compatible with all engines worldwide, ranging from 5 to 120 horsepower. ■ It is the world's first propeller to adopt geared blades, maintaining a stable blade angle and reducing the burden on the engine.

• others

Typical delivery time: Approximately 7 to 10 days * For shaft drive, taper and thread processing that matches the shaft is required. * The minimum clearance guideline between the hull and the propeller is about 10% of the diameter. * Returns or exchanges due to size differences cannot be accommodated. * For engines not listed, please use the measurement site. If you have concerns about the size, please be sure to check the appropriate size on the propeller measurement site below. ■ For sailing yachts, underwater resistance, which greatly affects speed, must be minimized as much as possible. The Gori folding propeller significantly reduces underwater resistance to about 1/10 compared to fixed propellers. ■ The Gori folding propeller automatically adjusts to the optimal blade angle based on centrifugal force and the conditions of fluid dynamics, weather, and sea state, delivering full power output in both forward and reverse. ■ It is compatible with all engines worldwide, ranging from 5 horsepower to 120 horsepower. ■ It is the world's first to adopt gear-equipped blades, maintaining a stable blade angle and reducing the burden on the engine.

• others

● It is convenient for connecting to parts with 1/2 male threads on one side. ● This is a one-touch piping system made in Germany from a special material that meets strict EU food hygiene regulations and can handle hot water up to 90°C. ● Simple one-touch connection by simply pushing the pipe into various fittings. There is no need for cumbersome tasks such as hose clamps, screw tightening, gluing, welding, or taping. ● Additionally, the connection can be easily disconnected at any time and reused. ● It has high water tightness that can handle hot water at 80°C under a pressure of 6 bar. ● It uses a robust special material that is flexible and resistant to freezing. ● Since there is no bending or twisting like with PVC hoses, stable and smooth water flow can be ensured even when using small nozzles through various fittings. ● There is no sagging or drooping, making it easy to drain water to prevent freezing, and it minimizes the occurrence of bacteria.

• others

● This is a 4-way switch panel with a circuit breaker (12V) that eliminates the hassle of fuse replacement. ● The rocker switch provides a satisfying tactile feel and features an LED indicator for excellent visibility, preventing forgetfulness in turning it off. ● The breakers are arranged as "5A / 10A / 10A / 15A." When the front cover is removed, the reset button is revealed. (See photo) ● It also comes with 40 types of label stickers. * Includes mounting surface seal rubber (Waterproof: IP65)

• others

● This is a convenient shut-off valve that allows you to open and close the drainage plug from the top to the bottom of the tank. ● It features an easy-to-use wheel-type handle, and the lower drainage plug is designed with a built-in spring that firmly pushes the O-ring. This allows for reliable control of drainage. ● Please cut the rod to match the height of the tank. ● The "type with overflow" automatically discharges excess water when the water supply reaches a certain level (height 225mm). (The discharge level can also be adjusted by cutting the overflow pipe. Suitable for clean water tanks. * When cutting the overflow pipe, please remove the white end cap at the top of the overflow pipe before cutting.) ● The drainage section that exits the bottom of the tank is screw-type (outer diameter 33mm) and can be connected to a ball valve (1 inch) and other fittings.

• others

● This is a 4-way switch panel with a circuit breaker (compatible with 12V/24V) that eliminates the need for troublesome fuse replacements. ● The rocker switch provides a satisfying tactile feel and features an LED indicator for excellent visibility, preventing accidental forgetfulness. ● The breakers are arranged as "5A / 10A / 10A / 15A." When the front cover is removed, a reset button is revealed. (See photo) ● It also comes with 40 types of label stickers. * Includes mounting surface seal rubber (waterproof: IP65)

• others

● This is an FRP countertop that accommodates custom-sized mini kitchens and washbasins. ● You can specify the width of the counter and the height of the front skirt board within the basic size. (*We can also accommodate sizes outside of the basic range, so please feel free to inquire.) ● We can process installation holes for sinks and faucets according to your specifications. *We will contact you regarding the details after receiving your order. *Delivery time: Approximately 1 to 2 weeks.

• others

The handle is integrated with the pump, eliminating the need to search for the handle in emergencies, making it safer. Additionally, the diaphragm can be easily replaced by simply removing three screws. *It can be used as a replacement for the conventional NJY boat's Patay bilge pump (oval shape), although some hole processing is required. (The hose diameter is also the same.) If you carefully position the mounting holes, you can cover the original screw holes. It is convenient to use the round holes in the cardboard included with the product for hole positioning.

• others

● This is a contact connector that can be used for centralized door locking and more. ● It is convenient for controlling electrical devices in conjunction with the opening and closing of doors, not limited to door locks. ● One side of the connector is spring-loaded, ensuring reliable electrical contact. ● Comes with four spacers (two 5mm and two 2.3mm) for precise height adjustments.

• others