木村刃物製造 List of Products and Services

We would like to introduce our "Excel Circular Saw Blade" for vertical cutting. It is well-received for its beautiful cutting surface when used for vertical cutting of general wood materials. We also offer dimensions other than the standard sizes, including those for edge trimming. Please feel free to contact us if you have any requests. 【Examples of Standard Sizes (Partial)】 ■φD205mm, T1.8mm, t1.2mm, φd25.4mm, P40 ■φD205mm, T2.2mm, t1.4mm, φd25.4mm, P40 ■φD255mm, T1.8mm, t1.2mm, φd25.4mm, P40 ■φD255mm, T2.0mm, t1.4mm, φd25.4mm, P40 ■φD255mm, T2.2mm, t1.4mm, φd25.4mm, P40 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "NEW Peeling Cutter" <Adjustable Gap Width>. This cutter is designed for processing wall panel materials with an adjustable gap width. By adjusting the thickness of the spacer, you can widen or narrow the gap width, allowing you to create wall panel materials in your preferred pattern. There are three types available: Type No.1 with a 45° inclined surface, Type No.2 for decorative surfaces, and Type No.3 for interlocking joints, all of which are suitable for both lift tables and molders. 【Features】 <Type No.1> ■ Standard type with a 45° inclined surface ■ Compatible with material thicknesses from 4mm to 5mm ■ Comes with a set of four cutters, allowing gap width adjustment from 0 to 7mm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Flooring Cutter" that we handle. This product has high fitting accuracy and can be adjusted for material thicknesses from 12mm to 18mm. We have prepared standard products for molders (with chamfering cutter included). Additionally, depending on the machinery used and the application, we can manufacture various sizes and shapes. Please feel free to contact us with your requests. 【Lineup】 ■ Cutter for male processing (standard product) ■ Cutter for female processing (standard product) ■ Complete set of adjustment spacers ■ Block (standard product) *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce our "Replaceable Blade Type Spindle Bit." By simply replacing the worn or damaged blades, you can maintain the same shape. This significantly reduces setup time and allows for cost savings. Additionally, the body surface has a special anti-rust treatment, and the body itself has been heat-treated for reinforcement. The surface of the replaceable blades is coated with a special strengthening coating, ensuring excellent blade retention. 【Features】 ■ No spare parts needed ■ Significant cost reduction due to reduced setup time ■ Long lifespan due to greatly reduced cutting resistance ■ Sturdy body with anti-rust treatment and heat treatment ■ Various types of drill bits for break cutting are also available *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our product, the "Threshold and Door Jamb Cutter (Three-Sided Finishing Cutter)." NKT is a carbide product. The side hairline cutting works well, allowing the grooves of the threshold and door jamb to be beautifully finished. We also offer dedicated spacers sold separately. The product dimensions are φD200mm, t21mm, φd25.4mm, P8. Please feel free to contact us if you have any requests. 【Dedicated Spacer Lineup】 ■ For 3 minutes (9mm): φD85mm, t15.3mm, φd25.4mm ■ For 4 minutes (12mm): φD85mm, t18.3mm, φd25.4mm ■ For 5 minutes (15mm): φD85mm, t21.3mm, φd25.4mm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our chip cutter '30P/18PB'. The '30P' is a groove cutter designed for thin materials, suitable for both vertical and horizontal use. It is a chip saw type with 30 blades, ideal for groove processing of glass grooves, plywood grooves, etc. The '18PB' features 6 main blades and 6 hairline blades on each side, totaling 18 blades, and is also suitable for both vertical and horizontal use. It is well-regarded for its outstanding cutting performance and beautiful cutting surface. We offer blade thicknesses ranging from 7.5mm to 36mm. 【Features】 ■ NKT: Carbide ■ The '30P' is ideal for groove processing of glass grooves, plywood grooves, etc. ■ The '18PB' is praised for its exceptional cutting performance and beautiful cutting surface. ■ Can be manufactured with a short lead time. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Adjustable Cutter" <Thickness Adjustable> that we handle. This is a thickness adjustable groove cutter that can be used both vertically and horizontally. It is used in a set of two, allowing you to adjust the groove width through spacers. The set of two features 18 blades, offering excellent cutting performance and a beautiful cut surface, which has received high praise. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ For groove widths of 3mm to 5mm: φD200mm, t3–5mm, φd25.4mm, P42, with adjustable spacers, chip saw type ■ For groove widths of 6mm to 11mm: φD200mm, t6–11mm, φd25.4mm, P18, with adjustable spacers ■ For groove widths of 11mm to 21mm: φD200mm, t11–21mm, φd25.4mm, P18, with adjustable spacers ■ For groove widths of 21mm to 41mm: φD200mm, t21–41mm, φd25.4mm, P18, with adjustable spacers *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Adjustable Fine Groover" <Thickness Adjustable>. It achieves non-chipping processing for materials such as Decora and melamine plywood. The hairline chip saws set on both sides are effective and create an excellent surface finish. With its thickness adjustment feature, it is particularly suitable for groove processing of decorative plywood. Please feel free to contact us if you have any inquiries. 【Features】 ■ Achieves non-chipping processing for materials such as Decora melamine plywood ■ Hairline chip saws set on both sides are effective ■ Creates an excellent surface finish ■ NKT: Carbide ■ Also available for molders *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Inner Round Cutter/Outer Round Cutter" that we handle. The inner round cutter is suitable for edge processing of tables, while the outer round cutter is suitable for handle processing of desks and windows. NKT offers these cutters in carbide with various sizes available. Please feel free to contact us if you have any requests. 【Inner Round Cutter Lineup (Partial)】 ■4.5R (3 minutes): φD200mm, t19mm, φd25.4mm, P6, R4.5mm ■6.0R (4 minutes): φD200mm, t22mm, φd25.4mm, P6, R6.0mm ■7.5R (5 minutes): φD200mm, t25mm, φd25.4mm, P6, R7.5mm ■9.0R (6 minutes): φD200mm, t28mm, φd25.4mm, P6, R9.0mm ■10.5R (7 minutes): φD200mm, t31mm, φd25.4mm, P6, R10.5mm *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Decorative Edge Cutter" <Disc Type for Woodworking Machines, Electric Tools>. The woodworking machine cutter features a disc-type design. It can be used with minimal concern for accidents caused by material bite or kickback. Additionally, we offer models for right rulers (white body) and left rulers (red body). Please feel free to contact us if you have any requests. 【Features】 ■ Disc-type design ■ Can be used with minimal concern for accidents ■ Available for right rulers and left rulers ■ NKT: Carbide *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce our "Chip Saws for Electric Tools" with coating processing. The material is NKT (carbide). For general wood, we offer products with an outer diameter of 125, blade thickness of 1.4, base thickness of 0.9, hole diameter of 20, and 42 teeth, among others. We also have pressure blade types, finishing types, and trimming types available. Please feel free to contact us if you have any requests. 【Lineup (partial)】 ＜For General Wood＞ ■ Outer diameter 125, blade thickness 1.4, base thickness 0.9, hole diameter 20, teeth 42 ■ Outer diameter 147, blade thickness 1.4, base thickness 0.9, hole diameter 20, teeth 52 ■ Outer diameter 165, blade thickness 1.6, base thickness 1.0, hole diameter 20, teeth 52 ■ Outer diameter 190, blade thickness 1.6, base thickness 1.0, hole diameter 20, teeth 52 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "All Diamond Siding Saw" <for electric tools>. This is a diamond saw blade for ceramic siding mode, featuring an 8P diamond blade that balances durability and cutting performance. Thanks to its leaded design, it offers a light and sharp cutting edge with minimal chipping, resulting in a clean cut surface. Please feel free to contact us if you have any inquiries. 【Features】 ■ Uses carefully selected high-quality DIA chips ■ All 8P diamond blades provide excellent durability ■ Leaded design for a light and sharp cutting edge ■ Minimal chipping, resulting in a clean cut surface ■ Regrindable for economic use *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Diamond Tipped Saw Blades." Compared to carbide products, these are significantly more durable. They are particularly effective for processing difficult-to-cut materials. High-precision machining can be maintained for extended periods, enabling increased productivity and cost reduction through fewer blade replacements. Additionally, we will design the most suitable saw blades according to the type of material being processed and the machining conditions, such as the machinery used. Please feel free to contact us with your requests. 【Main Processing Target Materials】 ■ Wood-based: Particle board, MDF, composite wood, etc. ■ Inorganic: Calcium silicate board, flexible board, etc. ■ Plastic: Melamine resin, artificial marble, etc. ■ Non-ferrous metals: Aluminum alloys, copper alloys, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "groove cutting saw blades" for plywood, particle board, etc. These are not standard stock items, but we can deliver them in a short lead time. Examples of custom-made products include φD150mm, T2.4mm, φd25.4mm, P40, and φD150mm, T2.8mm, φd25.4mm, P40. Please feel free to contact us if you have any requests. 【Examples of custom-made products (partial)】 ■ φD150mm, T3.0mm, φd25.4mm, P40 ■ φD150mm, T3.3mm, φd25.4mm, P40 ■ φD150mm, T3.5～3.6mm, φd25.4mm, P40 (0.1mm intervals) ■ φD150mm, T4.0mm, φd25.4mm, P40 ■ φD150mm, T4.5mm, φd25.4mm, P40 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Kumiko Chip Saw" <Straight Type> that we handle. We pursue high precision and sharpness. The yield has dramatically improved from carefully selected base materials. We also manufacture dimensions other than standard sizes and for gang processing. Please feel free to contact us if you have any requests. 【Standard Product Dimensions】 ■φD203mm, T1.3mm, t0.9mm, φd25.4mm, P40 ■φD205mm, T1.3mm, t0.9mm, φd25.4mm, P50 ■φD205mm, T1.3mm, t0.9mm, φd25.4mm, P60 ■φD230mm, T1.3mm, t0.9mm, φd25.4mm, P40 ■φD230mm, T1.3mm, t0.9mm, φd25.4mm, P60 ■φD255mm, T1.3mm, t0.9mm, φd25.4mm, P60 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Excel Tipped Saw" for Kumiko, a stepped type. This thin saw tipped blade, particularly popular in the Excel series for Kumiko, offers excellent yield. We can also manufacture it for gang processing. Please feel free to contact us if you have any requests. 【Standard Product Lineup】 ■ φD203mm, T0.8mm, t0.6/1.3mm, φd25.4mm, P40 ■ φD203mm, T1.3mm, t0.8/1.3mm, φd25.4mm, P40 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Gang Saw" that we handle. For hard materials such as birch wood, we use wear-resistant tips. We will manufacture the appropriate gang saw according to your usage conditions. Please specify the hole diameter, key dimensions, etc., as they vary depending on the machine used when placing your order. 【Examples of Custom Orders】 ■ φD203mm, T2.0mm, t1.4mm, φd40mm, P36, Molder Gang ■ φD255mm, T3.0mm, t2.0mm, φd75mm, P40 ■ φD270mm, T3.0mm, t2.0mm, φd75mm, P40 ■ φD305mm, T3.0mm, t2.0mm, φd75mm, P40 ■ φD355mm, T3.0mm, t2.0mm, φd75mm, P40 ■ φD405mm, T3.2mm, t2.2mm, φd75mm, P40 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Excel Chip Saw" for lip use. This product demonstrates excellent performance due to its design, which takes into account harsh usage conditions. For hard materials such as birch wood, wear-resistant tips are used. Please specify the hole diameter and pinhole, as these may vary depending on the machine used when making your purchase. 【Standard Product Lineup】 ■ φD255mm, T2.8mm, t2.0mm, φd25.4mm, P39, for lip A1 ■ φD305mm, T3.0mm, t2.2mm, φd25.4mm, P39, for lip A1 ■ φD355mm, T3.0mm, t2.2mm, φd25.4mm, P45, for lip A1 ■ φD405mm, T3.2mm, t2.4mm, φd25.4mm, P55, for lip A1 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Excel Circular Saw Blades" for horizontal cutting. We offer a variety of specialized types tailored to your intended use. You can specify the application and dimensions for effective use. We have the "A01 type" suitable for horizontal cutting of ordinary plywood and general wood, as well as the "A3 type" suitable for decorative plywood and soft non-combustible materials. Please feel free to contact us with your requests. 【Applications by Blade Type (Excerpt)】 ■ A01 Type: Horizontal cutting of ordinary plywood and general wood ■ A3 Type: Panel saw - flush (core wood) ■ A6 Type: Non-combustible materials, raw plywood ■ C1 Type: Aluminum (with lead) ■ C2 Type: Acrylic and plastic (with lead) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our vibration-damping chip saw, the "NEW Tenkaichi Chip Saw." The "vibration suppression" achieved by the damping base reduces resistance during cutting. As a result, it improves durability and surface finish, while also reducing noise generated by the vibration of the base. The noise during cutting is suppressed to be 4 to 7 dB lower compared to general products, making it essential for improving the working environment. 【Features】 ■ Excellent soundproofing effect ■ Improved durability ■ Outstanding surface finish *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company is engaged in the development and manufacturing of industrial machine blades. We offer a wide variety of products designed to cut various materials such as wood, paper, metal, and food, which is our strength. To ensure that the performance of the blades can be utilized according to the field, application, and purpose, we analyze materials, hardness, and precision, and repeatedly prototype to create products that we can confidently deliver. 【Main Products】 ■ Woodworking-related blades ■ Diamond blades ■ Paper and paper processing-related blades ■ Blades for plywood manufacturing machines ■ Blades for metal cutting machines ■ Other industrial machine blades ■ Precision machine parts *For more details, please download the PDF or feel free to contact us.

• others