米山工業 List of Products and Services

We would like to introduce our construction achievements using "rack scaffolding." The concrete fall prevention measures were utilized for the Shimotsuke Ohashi Bridge (a prestressed concrete three-span continuous frame box girder bridge) that spans the JR Tohoku Shinkansen and JR Tohoku Main Line on the Kita-Kanto Expressway. For the JR Tohoku Main Line, it was adopted under site conditions where there is a significant change in girder height. 【Overview】 ■ Location/Prefecture: Tochigi Prefecture ■ Client: East Japan Railway Company, Omiya Branch ■ Construction Company: Tekken Construction Co., Ltd. ■ Start Date of Use: February 2019 (on conventional lines), April 2019 (on Shinkansen) ■ Experience of local workers in rack scaffolding construction: First time ■ Presence of rack scaffolding handling instructor: Yes *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

We would like to introduce our construction achievements related to the seismic reinforcement work on the main bridge section (a prestressed concrete two-span continuous cable-stayed bridge) of the Tajiri Sky Bridge, which spans the Tajiri Fishing Port, along Osaka Prefectural Route 63, Izumisano-Iwade Line. The issue of yacht masts interfering with the permanent suspended scaffolding and rendering navigation impossible for vessels entering and exiting Tajiri Fishing Port was resolved by using a "rack scaffold." Additionally, after conducting a full-scale load test to confirm safety, we utilized floor truss materials with increased rigidity. As a result, it became possible to widen the spacing between the left and right rails compared to the initial plan. We changed the method of fixing the rail suspension points to the main girder from post-installed anchors to ground-mounted brackets (which do not require post-installed anchors), allowing us to lay the rails without damaging the main girder. The full-scale load test conducted this time expanded the maximum spacing between the left and right rails from 24 meters to 29 meters, enabling us to accommodate wider bridges as well. *For more details, please refer to the PDF document or feel free to contact us.*

• Scaffolding and Support Materials

We would like to introduce our construction achievements of the "rack scaffolding." It was utilized for the periodic inspection of the reinforcement girders of the simple truss section, side span section, and central span section of the Wakatō Bridge, which spans the Dokai Bay on the Wakamatsu side of National Route 199. Please feel free to contact us when you need our services. 【Overview】 ■ Location/Prefecture: Fukuoka Prefecture ■ Client: Kitakyushu City ■ Construction Company: IHI Infrastructure Systems Co., Ltd. ■ Start Date of Use: November 2021 ■ Experience of Local Workers in Rack Scaffolding Construction: Yes ■ Availability of Rack Scaffolding Handling Instructors: Yes *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

We would like to introduce our construction achievements of "rack scaffolding." In the new construction of the Tamagawa Sky Bridge connecting Haneda Airport and Tonomachi in Kawasaki City, we were utilized for the high-strength bolt work at the main girder connection and on-site painting work. Please feel free to contact us when you need our services. 【Overview】 ■Location/Prefecture: Tokyo, Kanagawa ■Client: Tokyo Metropolitan Government, Kawasaki City ■Contractors: Goyo Construction, Hitachi Zosen, Fudo Tetra, Yokogawa Bridge, Honma Corporation, Takada Kiko Special Construction *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

We would like to introduce our construction achievements of the "rack scaffolding." In the construction work of the Iwaki Bridge (new construction) connecting Iwaki Island and Ikina Island in the Seto Inland Sea, it was utilized for the bolting and painting of the main girder connection and the tensioning work of the diagonal members. Please feel free to contact us when you need our services. 【Overview】 ■ Location/Prefecture: Kamijima Town, Ochi District, Ehime Prefecture ■ Client: Ehime Prefecture ■ Construction Companies - Project 1: Kajima, MMB, Fuji P.S. JV - Project 2: Mitsui Sumitomo Construction, Mitsui Sumitomo Construction Steel Engineering, Showa Concrete Industry JV *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the rack scaffold's movable floor, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in the construction period for scaffold work. It demonstrates its characteristics in various sites, and for "inspection of external work vehicles," the rack scaffold can be installed with minimal materials and is lightweight, making it suitable even when the load capacity of the work vehicle is small. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving capabilities ■ Compatible with various shapes of structures *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a mobile suspended scaffolding that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in construction time for scaffolding work. It demonstrates its characteristics in various sites, and in cases where "the rack scaffolding is moved over the bridge pier to the next span," it can be installed on multi-span bridges using materials for just one span, with successful projects such as the Morimoto River Bridge. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving capability ■ Compatible with various structural shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a movable suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffold work. It demonstrates its characteristics in various sites, and in cases where "the rack scaffolding is moved over the bridge pier to the next span," it can be installed on multi-span bridges using materials for just one span, with successful projects such as the Takizawa River Bridge. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving capability ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the rack scaffolding mobile floor, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffold workers. It demonstrates its characteristics in various sites, and in the case of "bridges over navigation routes," even if the rack scaffolding mobile floor encroaches on the navigation limits, it can be stopped and secured outside the navigation limits when not in use, minimizing the impact on navigating vessels. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation ■ Excellent cost-effectiveness ■ Resource-saving ■ Compatible with various structural shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the moving floor of the rack scaffold, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in the construction period for scaffold work. It demonstrates its characteristics in various sites, and in "sites where transporting a large amount of suspended scaffold materials is difficult," the only necessary materials are the moving floor that the workers board and the running rail materials, resulting in material savings. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material savings possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a mobile suspended scaffolding that uses two rack rails installed on the structure as its track. After installing the rack scaffolding mobile floor, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffolding work. It can demonstrate its characteristics in various sites, and in locations where "there is a need to reduce traffic restrictions on main roads under bridges," the rack scaffolding can cover the area below the full suspended scaffolding installation site in advance, utilizing the rack scaffolding as a fall protection facility. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving capability ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a movable suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffold, only the extension work of the rack rails, which serve as the track, remains, significantly shortening the construction period for scaffold workers. It can demonstrate its characteristics in various sites, and in the case of “fall prevention sheet installation work and fall prevention net installation work,” there are significantly fewer hanging materials compared to full suspended scaffolds, resulting in higher work efficiency for sheet and net installation. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material conservation possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a movable suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in construction time for scaffold workers. It demonstrates its characteristics at various sites, and in locations where "the movement of rack scaffolding can be utilized for material transportation," it is possible to load and transport materials on the movable floor of the rack scaffolding. This makes it easy to transport materials that would be difficult to carry manually with conventional suspended scaffolding. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation ■ Excellent cost-effectiveness ■ Material-saving potential ■ Compatible with various structural shapes *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a mobile suspended scaffolding that uses two rack rails installed on a structure as its track. After installing the rack scaffolding mobile floor, only the extension work of the rack rails, which serve as the track, is required, significantly shortening the construction period for scaffolding work. It demonstrates its characteristics in various sites, and in "bridge inspections," it can quickly set up and dismantle scaffolding in areas that are unreachable by the bucket of a bridge inspection vehicle. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a movable suspended scaffolding that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in the construction period for scaffolding work. It demonstrates its characteristics at various sites, and in situations where "there is a need to quickly install a full suspended scaffolding on bridges over railways or main roads," the movable floor of the rack scaffolding can be assembled outside the influence area of the railway or main road, enabling the sequential deployment of the movable floor within a limited time to achieve a full suspended scaffolding state. [Rack Scaffolding (R) Features] ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving potential ■ Compatible with various shapes of structures *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a movable suspended scaffolding that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffolding work. It demonstrates its characteristics at various sites, and for "bridges over railways and main roads," the movable floor of the rack scaffolding can be secured outside the impact range of railways and main roads when not in use, minimizing the risk of damage from potential scaffold falls due to earthquakes and other events. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving potential ■ Compatible with various structural shapes *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a movable suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffold, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in the construction period for scaffold work. It can demonstrate its characteristics in various sites, and in locations where "there is a need to quickly respond to changes in the level of the work surface," level changes can be made quickly and easily by simply adjusting the length of the suspended material of the rack scaffold. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Resource-saving possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the rack scaffold mobile floor, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffold work. It can demonstrate its characteristics in various sites, and in locations where "there is a need to quickly install scaffolding during the night when the factory is not in operation," only the extension of the running rails is required after the installation of the rack scaffold mobile floor, enabling rapid scaffold installation. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick construction possible ■ Excellent cost-effectiveness ■ Resource-saving possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a movable suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffolding work. It can demonstrate its characteristics at various sites, and in locations where "a shorter construction period than conventional methods is required," it does not require the erection of frame scaffolding from the ground, thus preventing excessive material usage or prolonged construction periods due to the height of the work surface. 【Features of Rack Scaffolding (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material reduction possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the rack scaffold mobile floor, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in construction time for scaffold work. It can demonstrate its characteristics in various sites, and in "sites where the shape requiring scaffolding is particularly long in one direction," after installing the rack scaffold mobile floor, only the extension of the running rails is needed, making it more economical the longer the travel distance. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent economy ■ Material savings possible ■ Compatible with various shapes of structures *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffold (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the rack scaffold's movable floor, only the extension work of the rack rails, which serve as the track, is required, allowing for a significant reduction in construction time for scaffold workers. It can demonstrate its characteristics in various sites, and in locations where "work using the scaffold and ground work need to be performed simultaneously," there is no need to set up a frame scaffold from the ground, thus not hindering ground work and requiring no time for scaffold movement. 【Features of Rack Scaffold (R)】 ■ High safety ■ Quick installation possible ■ Excellent cost-effectiveness ■ Material-saving capability ■ Compatible with various shapes of structures *For more details, please refer to the PDF materials or feel free to contact us.

• Scaffolding and Support Materials

The "Rack Scaffolding (R)" is a mobile suspended scaffold that uses two rack rails installed on a structure as its track. After installing the movable floor of the rack scaffolding, only the extension work of the rack rails, which serve as the track, remains, allowing for a significant reduction in the construction period for scaffold work. Additionally, during the extension work of the rack rails, workers are always within the handrail area, which enhances safety during construction. In recent years, these features have been utilized for the installation of new bridges, inspection and repair work on existing bridges, and ceiling finishing in large buildings. [Features] ■ High safety ■ Rapid construction possible ■ Excellent cost-effectiveness ■ Material savings possible ■ Compatible with various shapes of structures *For more details, please download the PDF or feel free to contact us.

• Scaffolding and Support Materials

The "Aircraft Step Eliminator" is a boarding lift specifically designed for wheelchair users when boarding small aircraft that cannot use a boarding bridge, especially for customers with mobility impairments. It employs a highly safe rack and pinion drive system, and if the storage location is far, it can also be moved by a towing vehicle. Delicate movements near the aircraft can be performed easily and accurately with the electric assist feature. 【Features】 ■ If the storage location is far, it can also be moved by a towing vehicle. ■ Equipped with an electric assist feature. *For more details, please refer to the PDF document or feel free to contact us.

• Lifts for the disabled

We offer a home lift with a load capacity of 150kg. It is suitable for those who need to go up and down stairs from their parking space to the entrance, which can be a burden on the body. Additionally, in the event of a power outage during operation, it will automatically lower to the lower floor. When installed inside the home, it can utilize closet space, so it doesn't take up much room. 【Features】 ■ Easily lift items for those with elderly family members on the second floor ■ Pitless design is also available ■ Compatible with household power supply ■ Simple button operation ■ For light loads only *For more details, please refer to the PDF document or feel free to contact us.

• lift

We provide a "ship and wheelchair elevator" for individuals with mobility impairments to use when moving from the lower vehicle deck to the upper passenger cabin. The drive system employs either a rack and pinion engagement method or a roller chain method, demonstrating high durability even in the turbulent environment of a ferry and under conditions of severe salt damage. It has been completed after inspection by the Ministry of Land, Infrastructure, Transport and Tourism and the Japan Government. 【Features】 ■ High durability has been proven even in the turbulent environment of a ferry and under conditions of severe salt damage. ■ Completed after inspection by the Ministry of Land, Infrastructure, Transport and Tourism and the Japan Government. *For more details, please refer to the PDF materials or feel free to contact us.

• Elevator

"Mogurakku" is an elevator designed for deep shaft construction. The installation space required is only half that of conventional stair-type lifting equipment. This allows for a larger effective space within the shaft. Additionally, since the rails can be extended while excavating the shaft, the lifting height of this elevator can be adjusted according to the depth of the shaft. 【Features】 ■ Requires only half the space compared to conventional stair-type lifting equipment ■ Provides a larger effective space within the shaft ■ An optional sliding device can be added, allowing the cage to slide out of the shaft on the ground side, further increasing the effective space ■ Employs a rack and pinion engagement method for high safety in the drive system *For more details, please refer to the PDF materials or feel free to contact us.

• Elevator

We provide dedicated elevators for container crane operators installed at ports. We adopt a rack and pinion engagement method for the drive system, which offers high safety. Our advanced technology achieves low vibration and low noise. As ancillary equipment for container cranes, we supply these elevators to various port authorities around the world, including those in different regions. 【Features】 ■ High safety is ensured by adopting a rack and pinion engagement method for the drive system. ■ Low vibration and low noise are achieved through advanced technology. ■ High durability has been proven even in harsh port environments with salt and wind damage. ■ Over 130 units have been delivered, making it a highly reliable product. ■ The elevator technology is also applied to plant equipment such as thermal power plants. *For more details, please refer to the PDF document or feel free to contact us.

• Elevator

The "LUX Slider" is an automatic transport device that is not subject to the regulations concerning elevators, with a load capacity ranging from low load to 3000 kg. It accommodates all types of cargo, including carts, basket carts, and pallets. The lifting method uses a roller chain system, and the sliding method for the cargo platform employs a rack and pinion system. Since it automatically slides the cargo without the need for a pit, there is no concern about accidents associated with elevators, making it suitable for reducing running costs for cargo lifts. 【Features】 ■ Cargo slides out, eliminating concerns about accidents with elevators ■ Compatible with all types of cargo, including carts, basket carts, and pallets ■ No pit required ■ Reduced running costs compared to cargo elevators ■ No need for confirmation application *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment
• lift

The "Pet Lift" is a small cargo elevator that complies with the Building Standards Act and the Occupational Safety and Health Act, with a load capacity of 30 to 500 kg. We offer two types: standard and compact. It is effective for buildings where overhead space cannot be secured. Additionally, a pitless version can also be manufactured. 【Features】 ■ Complies with the Building Standards Act and the Occupational Safety and Health Act ■ Effective for buildings where overhead space cannot be secured ■ Pitless version can also be manufactured ■ Designed for light cargo only *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Ace" is a heavy-duty cargo lift capable of carrying loads from low weight up to 3000 kg. With a compact design that does not require a pit, loading and unloading tasks can be easily handled using a cart. Additionally, it excels in operability and durability, and its space-saving and energy-efficient design reduces running costs. We also offer "custom-made lifts" that can be installed in special environments. 【Features】 ■ Compact design that does not require a pit ■ Excellent operability and durability ■ Space-saving and energy-efficient design that reduces running costs ■ Safety design to prevent accidents ■ Standard equipped with fall prevention devices ■ Standard equipped with interlock mechanism *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Rack Lifter YV-5H" is a medium-duty cargo lift with a load capacity of 350 kg. The weight of the machine itself is reduced by about one-third compared to standard models. Additionally, the adoption of new guide rollers significantly reduces roller wear, improving the machine's durability. We also offer the "Rack Lifter YV-6" with a load capacity of 500 kg and the "Rack Lifter YV-8" with a load capacity of 950 kg. 【Features】 ■ The adoption of new guide rollers significantly reduces roller wear, enhancing the machine's durability. ■ Equipped with a fall prevention device used in home elevators, ensuring a safety design that prevents accidents before they occur. *For more details, please refer to the PDF document or feel free to contact us.

• lift

The 'Lift Pattan Ko' is a light cargo lift designed for a load capacity of 50kg. Assembly is very simple, and it can be operational from the day it is delivered. When not in use, the table can be folded, so it won't be in the way. We also offer the 'Rack Lifter YV-2GH/YV-2H' with a load capacity of 100kg, and the 'Rack Lifter YV-4H/YV-4W' with a load capacity of 240kg. 【Features】 ■ No pit required ■ Compatible with household power supply ■ Space-saving ■ Easy button operation ■ Designed for light cargo *For more details, please refer to the PDF document or feel free to contact us.

• lift

At Watabe Industries, we also develop and design specialized systems tailored to the unique specifications of our users based on the "Rack Lifter." We can accommodate explosion-proof specifications (such as pressure-resistant explosion-proof and intrinsically safe explosion-proof) and the integration of unmanned transport lines. Please feel free to contact us when you need assistance. 【Specification Examples】 ■ Explosion-proof specifications ■ Automatic transport line specifications *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Portilift" is a lift that uses a hydraulic arm. With the rationalization of the hydraulic system, adjustments and operations are easy. It is also suitable for loading and unloading trucks on platforms with height differences. A variety of types are available to choose from according to your needs, allowing for versatility in various applications. 【Features】 ■ A lineup of various types to choose from according to application ■ Designed with an extremely low minimum table height ■ Can completely stop at any position during lifting ■ Easy adjustments and operations due to the rationalization of the hydraulic system ■ Table dimensions can be made extremely wide ■ Well-suited for loading and unloading trucks on platforms with height differences *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Ace" is a chain lifter with excellent operability and durability. Its compact design eliminates the need for a pit, making loading and unloading tasks easy with a cart. This significantly improves work efficiency. With a space-saving and energy-efficient design, it reduces running costs and features a safety design that prevents accidents before they occur. 【Features】 ■ Excellent operability and durability ■ Space-saving and energy-efficient design that reduces running costs ■ Safety design that prevents accidents before they occur ■ Standard equipped with a drop prevention device ■ Standard equipped with an interlock mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "System Lifter" is a low-cost, reliable lift that comes fully packaged. It is equipped with enclosures and doors, as well as standard features like fall prevention devices and interlocks. If a ramp with a height of 150mm is installed, loading and unloading with a cart can also be performed. It operates on a dual roller chain system, and you can choose from four different types. 【Features】 - Comes standard with enclosures, doors, fall prevention devices, and interlocks - Loading and unloading with a cart is possible with the installation of a 150mm ramp - Safe operation with a dual roller chain system - Available in four different types - Capable of carrying most carts and pallets *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Rack Lifter YV-6/8" significantly reduces the machine's own weight by about one-third and greatly improves durability. By adopting a rack and pinion drive system, it prevents level drop under load. Since the load is applied to the rack rail, the burden on the building is minimized. Additionally, it boasts exceptional stability due to the dual pole type guide rails. 【Features】 ■ Reduces the machine's own weight by about one-third and greatly improves durability ■ Prevents level drop under load with the adoption of a rack and pinion drive system ■ Since the load is applied to the rack rail, the burden on the building is minimized ■ Wide table capable of carrying large loads ■ Exceptional stability due to dual pole type guide rails *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Rack Lifter YV-5H" is a lift that boasts exceptional stability due to its dual-pole type guide rails. The weight of the machine itself has been reduced, and the adoption of new guide rollers significantly decreases roller wear, thereby improving the machine's durability. It is equipped with a fall prevention device used in home elevators, ensuring a safety design that prevents accidents before they occur. 【Features】 ■ Improved machine durability ■ Safety design that prevents accidents with the inclusion of a fall prevention device ■ Increased work efficiency with the use of a geared motor with brakes ■ Wide table capable of carrying large loads ■ Exceptional stability due to dual-pole type guide rails *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Rack Lifter YV-4W" is a lift suitable for buildings where a pit cannot be dug on the first floor and for lifting to the second and third floors. Maintaining the excellent features of the "YV-4H," it is designed with a dual-pole type rack rail, eliminating the need for a pit. It boasts exceptional stability even with loads that have poor weight distribution. 【Features】 ■ Ideal for buildings where a pit cannot be dug on the first floor and for lifting to the second and third floors ■ If a ramp of 150mm height is installed, loading and unloading with a cart can also be performed ■ The drive unit is installed on top of the table, making maintenance easy ■ No pit required, providing peace of mind even if the floor needs to be washed *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Rack Lifter YV-4H" is a mid-class lift suitable for buildings where a pit cannot be dug on the first floor, and for lifting to the second and third floors. By simply installing a ramp with a height of 150mm, loading and unloading with a cart is also possible. Since no pit is required, you can rest assured even if there is a need to wash the floor. Additionally, the drive unit is installed on top of the table, making maintenance easy. 【Features】 ■ Revolutionary low-floor type ■ Loading and unloading with a cart is possible by installing a ramp with a height of 150mm ■ Drive unit installed on top of the table for easy maintenance ■ Peace of mind even if there is a need to wash the floor *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Rack Lifter YV-2H" is a light cargo lift with a load capacity of 100kg. It offers two types of table surface areas for loading, allowing you to choose according to your needs. Operation is simple with button controls, and the lift stops automatically when it reaches the desired height. Additionally, it remains stationary during power outages, ensuring safety. 【Features】 ■ Designed for light cargo ■ Equipped with a 100V motor, suitable for household power supply ■ Two types of table surface areas available for selection based on needs ■ Automatic stop during ascent and descent, remains stationary during power outages for safety *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Rack Lifter YV-2GH" is a compact design lift of the stationary type. Assembly is as simple as inserting the silver rack rail into the orange machine. It is equipped with a 100V motor, allowing it to be used with household power sources. The lift stops automatically at a certain position during ascent and descent. Additionally, it remains safe and does not move from that position during a power outage. 【Features】 ■ Suitable for shops and small warehouses ■ Easy assembly and space-saving design ■ Stationary type ■ Equipped with a 100V motor for use with household power sources ■ The lift stops automatically at a certain position *For more details, please refer to the PDF document or feel free to contact us.

• lift

Introducing the 'Lift Pattan Ko', which requires no installation work and can simply be placed on the floor. Assembly is very easy. It can be operational from the day it is delivered. Additionally, when not in use, the table can be folded, so it won't be in the way. The load capacity is 50kg. Please feel free to contact us if you have any inquiries. 【Features】 ■ Ideal for small shops and small warehouses ■ Very easy to assemble ■ Can be operational from the day it is delivered ■ The table can be folded when not in use *For more details, please refer to the PDF document or feel free to contact us.

• lift

Introducing Watabe's "Rack Lifter," which fully utilizes advanced technology. The operation employs a one-touch button system that is easy and reliable for anyone to use. Moreover, you can choose from a variety of options based on your needs and location. We offer selections for the lift shaft, doors, loading and unloading entrances, and even the body color. 【Features】 ■ Simple operability that anyone can manage ■ A range of options to choose from according to your needs - Selection of lift shaft, doors, loading and unloading entrances - Body color *For more details, please refer to the PDF document or feel free to contact us.

• lift

We would like to introduce Watabe's "Rack Lifter," which fully utilizes advanced technology. The drive system adopts a gear mechanism. Even when loaded to the maximum weight limit, there is no level drop due to wire elongation, so the stop position does not shift. High safety and high precision in stop positions minimize stress for workers and improve work efficiency. 【Features】 ■ No worries about wire breakage ■ No level drop due to wire elongation even when loaded to the maximum weight limit ■ High safety and high precision in stop positions ■ Minimizes stress for workers and improves work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• lift