サンエー工業 List of Products and Services

We would like to introduce the ultra-high pressure washers and medium pressure high flow washers that we handle. The "Ultra High Pressure Washer" lineup includes the "HiW-210M model" with a flow rate of 50L/min and the "HiW-350 model" with a flow rate of 26.4L/min. It comes with a lever grip nozzle, a manual hose nozzle, and a 300L water tank. Additionally, the "Medium Pressure High Flow Tandem Turbo Pump" will be designed, planned, and quoted according to your usage conditions. 【Specifications (excerpt)】 <High Washer HiW-210M model> ■ Voltage: 200V ■ Output: 22kW ■ Discharge Pressure: 20.59MPa (210kg/cm2) ■ Dimensions (mm): Width 1,000 × Length 2,095 × Height 1,240 <High Washer HiW-350 model> ■ Voltage: 200V ■ Output: 18.5kW ■ Discharge Pressure: 34.32MPa (350kg/cm2) ■ Dimensions (mm): Width 1,000 × Length 2,125 × Height 1,240 *For more details, please refer to the PDF document or feel free to contact us.

• Building Cleaning Equipment

The "JSP-4 type/JSP-8 type" is a jet sweep pump that can be used with a 100V power supply. Designed with the user in mind, it features a simple structure that allows for easy daily maintenance and quick recovery on-site in case of failure. Its uniquely developed vacuum generator efficiently creates a vacuum of -0.085MPa (-630mmHg) and is resistant to wear and tear. Additionally, it is equipped with a function not only to suction but also to discharge wastewater, allowing for drainage up to a height of 5m, and it can discharge water up to 50m horizontally. 【Features】 ■ Powerful vacuum pump ■ Low failure rate with durable components ■ Easy maintenance structure ■ Operable even when submerged ■ Strong discharge power *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

The "SW-37 model" is an aqua sweeper that employs a newly designed vacuum generator with almost no performance degradation due to wear. At a pressure of -0.061MPa (-450mmHg), which influences the performance of the residual water treatment machine, it achieves an air suction volume of 300L/min. This allows for complete water extraction down to the last drop, achieving zero residual water. Additionally, the three elements that constitute the sweeper's performance (vacuum performance, air suction volume, and drainage performance) have been balanced to achieve high performance, allowing the suction hose to be extended up to 100m. 【Features】 ■ Completely extracts water down to the last drop, achieving zero residual water ■ Strong vacuum generation of -0.085MPa (-630mmHg) ■ The synergy of a specially designed pump for the ejector and a newly designed recovery tank improves drainage performance to 300L/min under standard specifications (lifting height of 5m) ■ Once the sweeper is set up, it can cover a radius of 100m with a single hose *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "SW-8S model" is a super multi-sweeper that is suitable for drainage work in narrow and deep places due to its strong suction power. It has a powerful suction capacity of 140L/min using a "40A hose 20m" at high vacuum levels. It can safely suction water mixed with sludge. Additionally, even without a water supply system, it can operate continuously for 8 hours using only the water from the circulation tank, and there is no decrease in vacuum performance even when the temperature of the circulating water reaches 60°C. 【Features】 ■ Quick vacuum generation allows you to start working immediately after connecting the water hose. ■ Safely suctions water mixed with sludge. ■ Recovered sludge can be extracted with an average moisture content of 35% through a unique vacuum dehydration process. ■ There is no decrease in vacuum performance even when the temperature of the circulating water reaches 60°C. *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

The "Fuma 8K Type" is a versatile water vacuum cleaner that sucks up residual water and sludge from concrete surfaces without leaving a drop behind, making cleaning tasks remarkably comfortable. It can quickly suck up residual water and standing water from deep places (around 5 meters) to the surface using a hose, and it can also extract bottom water from deep and narrow rebar forms by extending the hose from the ground, facilitating residual water treatment. Please feel free to contact us if you have any inquiries. 【Features】 ■ A "versatile water vacuum cleaner" that continuously sucks and drains standing water mixed with sediment ■ Effective in various situations such as under bridge deck reinforcement, at the bottom of water tanks, tank bottoms, slabs, and U-shaped ditches ■ Capable of safely sucking up water mixed with sludge ■ The sediment separated during suction can be accumulated in a sludge bag and dewatered for removal *For more details, please download the PDF or contact us.

• Building Cleaning Equipment

The "integrated unit" of the SVC series (vacuum pump + recovery tank) is a vacuum shooter that significantly improves work efficiency with its excellent continuous suction capability. By adding a booster unit (VPU) that can be powered up at any time, it eliminates the need to replace the main SVC unit, allowing for cost reduction. It operates fully automatically, so no operator is required. Additionally, we also offer a "separate unit" that can be combined with suitable tanks for different purposes. 【Features】 ■ Cost reduction is possible by adding a booster unit (VPU) that can be powered up at any time, eliminating the need to replace the main SVC unit. ■ It can quickly recover from deep shafts using the newly developed step tank pipe (STP), making it usable even in narrow shafts. ■ System design is planned according to the intended use. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

We would like to introduce the step tank pipe 'STP-75 type' that we handle. In cases where the shaft is deep or the distance is long due to shield construction, it improves the suction efficiency for vacuum boosters. We will design, plan, and provide estimates according to the usage conditions. Please feel free to consult us when you need assistance. 【Specifications】 ■ Suction inlet diameter: 100mm ■ Drain outlet diameter: 100mm ■ Dimensions: Length 900mm, Width 630mm, Height 700mm ■ Dry weight: 60kg *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce our fully automatic continuous suction and sludge discharge tank unit, the 'WT type'. It continuously and automatically separates and discharges the suctioned sand and gravel. If there is a large amount of gravel, it is also possible to use a separate gravel recovery tank (KH-500). We will design, plan, and provide estimates according to your usage conditions, so please feel free to consult us. 【Features】 ■ Continuously and automatically separates and discharges the suctioned sand and gravel ■ The gravel recovery tank (WT) can be installed in the pit, and with the automatic transport function, vacuum recovery work can be performed continuously ■ If there is a large amount of gravel, it is also possible to use a separate gravel recovery tank (KH-500) *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment

The SC-4D is a slurry machine with a continuous suction and discharge function that emphasizes workability. It continuously and automatically discharges the sand and gravel separated from the air. Dehydration is achieved through the vibration screen of the Sand Master incorporated at the bottom. The recovery tank, which excels in air-water separation functionality, allows for the selection of pumps according to the processing purpose of the recovered materials. 【Features】 ■ Continuous suction and discharge function focused on workability ■ Ability to select pumps based on the processing purpose of the recovered materials ■ Design, planning, and estimates can be tailored to usage conditions ■ Installation of a slurry machine for gravel and sand recovery in a shaft, enabling on-site solid-liquid separation and dehydration in combination with a vibration screen *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce our rubble recovery tank, the "KH-500 model." The hatch opens and closes using a hydraulic pump (manual). The rubble recovery tank (WT) is installed in the shaft, and with its automatic discharge function, vacuum recovery operations can be carried out continuously. We will design, plan, and provide estimates according to your usage conditions. 【Specifications】 ■ Total volume: 0.5m³ ■ Settling volume for rubble: 0.35m³ ■ Inlet diameter: 100mm ■ Outlet diameter: 100mm ■ Dimensions: Length 1,450mm, Width 700mm, Height 1,020mm ■ Dry weight: 440kg *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

The "MFYS-S1" is a water-draining FIBC (filter dewatering bag) made from PP multi-filament woven fabric that excels in collectability. The bag is made of 100% polypropylene, which has excellent chemical resistance and can accommodate a wide range of liquids. Its lighter specific gravity compared to other synthetic fibers helps reduce the product weight. Additionally, we offer a "self-weight dewatering tank for water-draining FIBC" that completes the processes of raw water input, self-weight dewatering, and drainage within the tank. 【Features】 ■ Uses highly breathable woven fabric ■ Fast dewatering speed due to gravity ■ High and stable dewatering performance ■ Excellent chemical resistance, compatible with various chemicals ■ Additional self-weight dewatering tank *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

The "HPC System" is designed with multiple combinations of water pumps according to the water volume, and it controls the water pumps based on the usage amount. The control method detects flow rate and pressure to adjust the number of operating water pumps according to the usage amount. This prevents unnecessary electricity consumption by increasing or decreasing the operation of the water pumps. Additionally, it can reduce unnecessary wear on the water pumps, and it is cost-effective due to reduced maintenance and energy-saving operations. 【Features】 ■ Designed with multiple combinations of water pumps according to water volume ■ Controls water pumps based on usage amount ■ Increases or decreases the operation of water pumps to avoid unnecessary electricity consumption ■ Reduces maintenance ■ Energy-saving operation *For more details, please refer to the PDF document or feel free to contact us.

• Water supply facilities

The water supply for shield tunnel construction is ideally suited for the rational "Free Step Pump." The slope of the tunnel, the depth of the shaft, and the required water volume in the tunnel vary depending on the construction conditions, so comprehensive planning and design are necessary. Additionally, with the increasing height of construction projects, it can accommodate temporary water supply systems of any floor height. Since all piping (ladder hoses) and valve units are provided for rent, it contributes to a zero-mission approach by leaving no waste on-site after use. 【Features】 <Free Step Pumping System for Super High-Rise Buildings> ■ Developed to accommodate temporary water supply systems of any floor height ■ All piping (ladder hoses) and valve units are provided for rent ■ Contributes to a zero-mission approach by leaving no waste on-site after use *For more details, please refer to the PDF materials or feel free to contact us.

• Water supply facilities

The "BP-5N" is a my pump booster unit equipped with a 200L water storage tank. It can supply a stable pressure of 0.5MPa at all times, unaffected by fluctuations in underground water supply pressure. It provides uniform mixing water without inconsistencies. Additionally, the water storage tank is equipped with a ball valve. Please feel free to consult us when you need assistance. 【Features】 ■ Easy to use with an automatic pressure-regulating pump ■ Provides stable supply of uniform mixing water, ensuring consistency ■ Comes with a 200L water storage tank ■ Energy-efficient operation ■ Equipped with a ball valve in the water storage tank *For more details, please refer to the PDF document or feel free to contact us.

• Water supply facilities

We would like to introduce our temporary water supply system, the "Pumping Ladder System." By combining a pumping washer and a ladder hose water supply system, we deliver construction water and high-pressure cleaning water through a 12mm high-pressure hose. Not only does it supply water at a high elevation, but it also accommodates long horizontal construction projects, providing significant cost reductions with hassle-free combined water supply (low pressure and high pressure). 【Features】 ■ Delivers construction water and high-pressure cleaning water through a 12mm high-pressure hose ■ Valves and high-pressure hoses can be connected by hand ■ Suitable for long horizontal construction projects such as tunnel construction ■ Provides significant cost reductions with hassle-free combined water supply (low pressure and high pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Water supply facilities

We would like to introduce our dust catcher, the 'SS-1 type'. By installing this product above the raw water tank, it is possible to remove leaves and debris mixed in the raw water, thereby reducing the troubles that occur on the turbid water treatment side. We will design, plan, and provide estimates according to your usage conditions. Please feel free to contact us when you need assistance. 【Features】 ■ Removes leaves and debris from the raw water for turbidity treatment ■ Removes leaves and debris from river water intake ■ Can reduce troubles that occur on the turbid water treatment side ■ Design, planning, and estimates are provided according to usage conditions *For more details, please refer to the PDF materials or feel free to contact us.

• Turbid water and muddy water treatment machines

We would like to introduce the "Prefilter" that we handle. By installing filter material according to the selected corner tank based on the processing water volume, it can be easily and inexpensively set up. Depending on the situation, filter materials can be selected from Stella Sheet or Mall Code. 【Features of Stella Sheet Type S】 ■ A non-woven fabric made from palm fibers (natural fibers) that make up the shell of coconut, processed with a special adhesive and needle punch method. ■ It has large voids, making it easy for sand and gravel to settle, and it has excellent permeability. ■ The product is not colored, preserving the natural color of the material itself. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

We would like to introduce our automatic drainage tank pump. The automatic drainage tank pump allows for easy relay drainage without the need to dig a pit underground, eliminating the hassle of cleaning the bit and the need to interrupt drainage. Additionally, it completely prevents overflow from the relay pit. 【Automatic Drainage Tank Pump Model TP-400】 ■ Voltage: 200V ■ Output: 1.5kW to 7.5kW ■ Dimensions: Width 460mm × Length 1,300mm × Height 755mm ■ Weight: 190kg (pump sold separately) ■ Standard accessories: Pump automatic operation panel *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce the various hoses we handle. We offer easy-to-use Sunny hoses for general drainage and high-net hoses with reinforced fibers. For suction hoses, we have the Crystal Hose F3 type, Tai Power Hose WS type, and Tai Power Hose WR type Banner/Kana Power in our lineup. 【Product Lineup】 ■ Sunny Hose ■ Suction Hose (Crystal Hose F3 type) ■ Suction Hose (Tai Power Hose WS type) ■ Suction Hose (Tai Power Hose WR type Banner/Kana Power) ■ High Net Hose *For more details, please refer to the PDF document or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce the hose nipples/connection parts that we handle. We offer a variety of hose nipples/connection parts, including pump nozzles JIS 10K flanges, hose nipples, S-1 nozzles, and Y-shaped strainers. The pump nozzle JIS 10K flange is available in sizes ranging from 40mm to 300mm. 【Product Lineup (Partial)】 ■ Pump nozzle JIS 10K flange ■ Pump S-I nozzle ■ Hose nipple ■ Elbow hose nipple ■ Nipple with JIS 10K flange *For more details, please refer to the PDF document or feel free to contact us.

• Drainage material

We would like to introduce the temporary piping we handle. We offer rental and sales of lightweight steel pipe. We also accept requests for piping installation work. Please feel free to consult us. You can also view an outline diagram of pipe transportation and loading in the PDF materials. 【Lineup】 ■ 90° Elbow (with S color) ■ Tee (with S color) ■ Victaulic Joint - S type (standard type) - S-ONE type (one-touch type) *For more details, please refer to the PDF materials or feel free to contact us.

• Fittings

We would like to introduce our "Polyethylene Notch Tank." It can be installed by hand during setup and removal, making it possible to install in locations where lifting equipment cannot be used. It has a built-in pump and can be used as a receiving tank. The flange part is usually shipped with a blind cover, so please consult your sales representative if you are considering connections or other modifications. 【Features】 ■ Can be installed by hand during setup and removal ■ Can be installed in locations where lifting equipment cannot be used ■ Drain outlet with super low-reach joint ■ Triangular weir for flow management ■ Built-in pump *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Here is an introduction to deep well drainage. When conducting underground excavation work, it becomes necessary to lower the water level in the area being excavated if the groundwater level is high. One of the methods employed for this purpose is the deep well drainage method. By implementing the deep well drainage method, it is possible to lower the groundwater level and perform dry excavation. (The number and depth of wells may vary depending on the geological conditions.) 【Features】 ■ When conducting underground excavation work, it becomes necessary to lower the water level in the area being excavated if the groundwater level is high. ■ One of the methods employed for this purpose is the deep well drainage method. ■ It becomes possible to lower the groundwater level and perform dry excavation. *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment

We would like to introduce the sand separator "SC-40 model" that we handle. It has a simple structure, is low-cost, requires little effort, and demonstrates stable effectiveness, making it possible to install even in narrow spaces. It can be used for sand removal from well water and for treating supply water for high-pressure washers. By recovering fine sand, it reduces wear on the washing machine and improves durability. 【Features】 ■ Simple structure ■ Low cost ■ Requires little effort and demonstrates stable effectiveness ■ Can be installed in narrow spaces *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Our company handles a variety of "environmental protection-related equipment and facilities." We neutralize and treat wastewater generated during the treatment of contaminated soil containing harmful substances from natural sources and former factory sites. Depending on the type of harmful substances, we select appropriate treatment methods such as neutralization, adsorption, coagulation and sedimentation, filtration, and chemical reactions to respond appropriately and protect the environment of the discharge destination. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■ Dilute sulfuric acid neutralization treatment machine ■ Aeration blower ■ Stirring machine for reaction tank ■ Turbid water treatment machine ■ Fully automatic filtration device ■ Water quality monitoring panel *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment Plant

San-Ei Kogyo Co., Ltd. offers products and technologies that satisfy our customers, utilizing the accumulated know-how in all fields of "drainage, water supply, cleaning, recovery, treatment, and environment." This catalog introduces water treatment machinery that caters to various applications. We feature a diverse range of products, including "submersible pumps," "auto pumps," "water supply pumps," and "high-pressure cleaners." Please use this catalog to assist in selecting products. [Contents (excerpt)] ■ Drainage: Submersible pumps, auto pumps ■ Water supply: Water supply equipment, water supply pumps ■ Cleaning: High-pressure cleaners ■ Recovery: Vacuum systems *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment