日本エアーテック List of Products and Services

We would like to introduce our ozone deodorization and sterilization storage unit, the 'AGJ-800K'. It uses a safe ozone generator that does not produce NOx. It deodorizes and sterilizes overnight, allowing for a fresh use the next morning. Please feel free to contact us when you need assistance. 【Features】 ■ Clean air blows directly from above the clothing ■ Uses a safe ozone generator that does not produce NOx ■ Vibration unit further promotes ozone decomposition ■ Deodorizes and sterilizes overnight, allowing for a fresh use the next morning *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our sputum collection booth, "ALF-903." Samples collected inside the booth can be taken in and out through the sample window. It has negative pressure performance in accordance with the CDC guidelines of the United States. Please feel free to contact us if you need assistance. 【Features】 ■ Door with colored film to protect privacy ■ Negative pressure performance in accordance with the CDC guidelines of the United States ■ Improved maintenance with the control panel installed on the back of the device ■ Contributes to disinfection inside the booth with UV lamp operation after use *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "Clean Partition Series" is a super-thin, high-performance air purifier. It features a slim model "ACP-508AH," along with three types: "ACP-898AH/ACP-898BH" and "ACP-898CH/ACP-898DH." It is a caster-type model that makes moving and installation easy. Please feel free to contact us if you need assistance. 【Features】 ■ Energy-saving model equipped with a DC brushless motor ■ Effective in a wide range of settings such as offices, hospitals, and nursing facilities ■ Uses antibacterial coating and antibacterial operation panel ■ Easy to move and install with caster-type design *For more details, please refer to the PDF materials or feel free to contact us.

• Welfare and medical equipment
• Air conditioning equipment

We would like to introduce our clean oven, the "AHO-530." Equipped with a programmable temperature controller that allows for step operation. There is also space at the bottom for storing equipment. Please feel free to contact us if you have any inquiries. 【Features】 ■ Maintenance with filter fixation using a snap lock ■ Equipped with a programmable temperature controller that allows for step operation ■ Maximum of 16 patterns and 16 steps for setting time and temperature ■ Space available at the bottom for storing equipment *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• Heat and Drying Treatment Systems
• others

The "MCB06-202020T6" is a clean booth with automatic airflow control that allows for the replacement of the HEPA filter from the bottom of the filter unit. With the built-in cleanliness monitor, the cleanliness inside the booth can be automatically controlled to correspond to ISO classes 5 to 8.5. Additionally, we offer the clean monitor "ACM-02," which allows for easy installation of sensors to verify the cleanliness of the workspace at a high level. 【Features】 ■ Automatic airflow control for cleanliness corresponding to ISO classes 5 to 8.5 ■ HEPA filter replacement can be performed from the bottom of the filter unit (booth ceiling surface) ■ Approximately 90% of the materials used are produced in-house, achieving short delivery times, low prices, and high-quality products ■ Custom designs are possible to fit the space when a localized clean area is needed *For more details, please refer to the related links or feel free to contact us.

• others

We would like to introduce our draft device, the "Nanoparticle Exhaust Bench." This product is designed for nanoparticle work. It protects the operator from exposure to nanoparticles through exhaust airflow. The external dimensions are W1400×D780×H1420mm, and the weight is approximately 170kg (main unit: about 120kg, storage case: about 50kg). Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Model: ADN-1300LSB ■ Dust collection efficiency: 99.99% or more for 0.3μm particles ■ Dust collection efficiency - Main filter: HEPA filter - Pre-filter: Non-woven fabric filter *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our draft device, the "Ductless Fume Hood." Light gases are drawn from the ceiling, while heavy gases are suctioned from the back and front, allowing for quick removal from the chamber. With a handle for easy removal during filter replacement, the recommended replacement period is indicated by a display lamp. 【Features】 ■ Efficient ventilation with a unique airflow method ■ Easy-to-replace gas removal filter ■ Light gases are drawn from the ceiling, heavy gases from the back and front ■ Recommended replacement period indicated by a display lamp *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our exhaust management equipment, the "Draft Device." This device captures harmful gases, chemical dust, and particulate matter generated in large quantities during operations that can adversely affect clean rooms and workers, ensuring human safety and preventing contamination of other spaces. We offer various types, including low-exhaust and explosion-proof models. Please feel free to contact us when needed. 【Features】 ■ Ensures human safety by capturing harmful gases, chemical dust, and particulate matter at the source during operations that generate them in large quantities. ■ Prevents contamination of other spaces. ■ Various models available, including low-exhaust and explosion-proof types. *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

In the semiconductor industry, processes such as wafer annealing, resist film drying, lens drying after cleaning in the optical field, and sterile drying of medical equipment are ideally suited for a "clean oven" controlled in a high-temperature and high-purity environment. Our company offers "clean air ovens" in both "standard" types with internal temperatures ranging from 60 to 200°C, as well as "special" types such as steam ovens and large ovens. Additionally, we accommodate various requests based on the dimensions and types of products and materials. Please feel free to contact us when you need assistance. 【Standard Clean Air Oven Specifications (Partial)】 ■ Model: ACO-200-554K ■ Cleanliness (at room temperature, overall efficiency): ISO Class 5 (Class 100) ■ Dust collection efficiency: 99.97% or higher for 0.3μm particles ■ Dust collection elements: - Main filter: High-temperature HEPA filter - Pre-filter: Non-woven fabric filter *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others
• Heat and Drying Treatment Systems

We would like to introduce our cleanroom equipment, the "Storage Cabinet." Our lineup includes the "Recyclable Clean Shelf," "Shoe Dryer," and "All Fresh Clean Shelf." Additionally, we offer a "Battery-Powered Mobile Storage Cabinet" with large casters and a "Motor-Driven Clean Wagon" that can be easily moved. 【Partial Lineup】 ■ Recyclable Clean Shelf ■ Shoe Dryer ■ All Fresh Clean Shelf ■ Clean Dryer *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our cleanroom internal equipment, the "Manual Reticle Stocker." Management is possible using a barcode reader and shelf position indicator lights (linked with inventory storage computers). The number of shelves is 30 tiers × 6 columns, and the management items include entry and exit times, product names, and entry and exit counts. Please feel free to contact us when you need assistance. 【Features】 ■ Cleanliness of storage shelves is ISO Class 3 to 4 (Class 1 to 10) ■ Management can be done using a barcode reader and shelf position indicator lights (linked with inventory storage computers) ■ Suitable for storing approximately 100 to 300 pieces at a low price *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our clean room internal equipment, the "Vertical Fully Automatic Reticle Stocker." To prevent impact during case in-and-out operations, the shelf supports are made of Delrin resin molded products. It is equipped with a built-in computer, allowing for a wealth of proprietary software. Additionally, it employs our own developed Class 1 compliant multi-joint arm robot (featuring ultra-low dust generation mechanisms, absolute value control servo motors, and position correction using a CCD camera, enabling variety management). 【Features】 - An ULPA filter is installed at the front of the shelf, and reticle cases are stocked directly beneath the filter. - The reticle cases can accommodate 6-inch models from Nikon and Canon, as well as 5-inch reticle cases and other special cases such as SMIF cases. - To prevent impact during case in-and-out operations, the shelf supports are made of Delrin resin molded products. - It can be set up with an automatic transport device, and manual or AGV devices can also be used for in-and-out operations. - With a built-in computer, it offers a wealth of proprietary software. *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our clean room equipment, the "Horizontal Fully Automatic Reticle Stocker." It features a self-developed class 1 compliant multi-joint arm robot (with ultra-low dust generation mechanism, absolute value control servo motor, position correction using a CCD camera, and variety management capabilities). Additionally, it can accommodate reticle cases from Nikon and Canon in 6-inch sizes, as well as 5-inch reticle cases and other special cases like SMIF cases. 【Features】 ■ An ULPA filter is installed at the front of the shelf, and reticle cases are stocked directly beneath the filter. ■ To prevent shock during case entry and exit, shelf supports are made from Delrin resin molded products. ■ It can be set up with an automatic transport system, and manual or AGV devices can also be used for entry and exit. ■ It has a built-in computer, allowing for a wealth of self-developed software. ■ It is also possible to link with the customer's host computer. *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

The "Constant Temperature and Low Humidity Clean Chamber" is an internal device for clean rooms with a cleanliness level of ISO Class 5 (Class 100). The relative humidity inside the chamber is designed to be in the range of 5 to 30% RH (at 22°C). The airflow velocity can be adjusted using an airflow controller. Our company has designed and manufactured numerous "Thermal Clean Chambers" equipped with temperature and humidity control functions, leveraging our extensive clean technology and experience. 【Features】 ■ Cleanliness level is ISO Class 5 (Class 100) ■ Relative humidity inside the chamber is designed to be in the range of 5 to 30% RH (at 22°C) ■ Temperature inside the chamber can be controlled within ±1°C ■ Airflow velocity can be adjusted using an airflow controller *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

The "Thermal Clean Chamber" is an internal device for clean rooms with a cleanliness level of ISO Class 4 (Class 10). It employs a PID control, ultra-precise components, and an airflow system tailored for temperature accuracy, achieving temperature fluctuation precision from 0.1℃ to 0.002℃. Additionally, humidity control is available in the standard specification range of 40-60% RH, as well as a low humidity specification upon request, ranging from 5-40% RH. 【Features】 ■ Cleanliness level of ISO Class 4 (Class 10) ■ Temperature control capable of ±0.1℃ to ±0.005℃ ■ Customizable design to fit built-in devices ■ Safety considerations with multiple protection circuits *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

The "Air Curtain for Refrigerated Warehouses" is a space-saving entry management device/equipment that does not require much installation space. It can reduce the air conditioning load of refrigerated warehouses and lower maintenance costs such as defrosting. Maintenance can be performed from the inside of the passage opening, and it can also be installed embedded in insulated walls. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves approximately 75% high thermal insulation efficiency ■ Equipped with a high-efficiency DC brushless turbo fan ■ Multi-stage variable speed control of air curtain airflow is possible ■ Space-saving design that does not require much installation space ■ Reduces the air conditioning load of refrigerated warehouses *For more details, please refer to the PDF materials or feel free to contact us.

• Clean Room
• others

We would like to introduce our entrance management device/equipment, the "Shower Pass Box." By adopting low-dust hinges, we suppress the generation of dust. There are optional mounting flanges and stands available. Additionally, we also offer the "Shower Pass Box," so please feel free to contact us when you need it. 【Features】 ■ Low-dust hinges adopted ■ Suppresses dust generation ■ Mounting flanges and stands are optional ■ Available in both air shower and air curtain types *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our entrance management device/equipment, the "Shower Pass Box with Automatic Door." The power supply is AC200V 3-phase 50/60Hz, with a power consumption of approximately 4200VA, excluding the conveyor. Additionally, the external dimensions are W2500×D2656×H3250mm. The main body is made of steel plate with baked paint. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Model: AASB06-20.27.20 ■ Dust collection efficiency: 99.99% or more for 0.3μm particles ■ Dust collection elements - Main filter: HEPA filter (ATML-10-E41Z) ×4 - Pre-filter: Polyester non-woven fabric filter (400×350×t12) ×4 *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

We would like to introduce our entrance management device/equipment, the "Clean Auto Pass Box." It features an interlock mechanism and utilizes a high-efficiency DC brushless motor. In addition to the air shower type, we also offer an air curtain type. A roller conveyor is available as an option. 【Features】 ■ High-efficiency DC brushless motor ■ Interlock mechanism ■ Touch-operated control panel ■ Can be linked with the transport line ■ Roller conveyor is optional ■ Available in both air shower and air curtain types *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

The "Standard Model 06 Pass Box" is an entry management device/equipment that suppresses dust generation through low-dust hinges. The usability is enhanced by the door electromagnetic lock and the notification light buzzer for one-sided door opening and closing. Detailed operations can be modified through program control (excluding the EPB model). Additionally, it features a flat structure with minimal protrusions to reduce dust accumulation and a large window (clear tempered glass) for good visibility. Please feel free to contact us when you need assistance. 【Features】 - Enhanced usability with door electromagnetic lock and notification light buzzer for one-sided door opening and closing - Detailed operations can be modified through program control (excluding the EPB model) - Suppresses dust generation with low-dust hinges - As an option (excluding the EPB model), sterilization inside the box using a sterilizing lamp (automatic shut-off setting available) - The HPB model includes a cleanup function with a HEPA filter to purify the interior (automatic stop setting available) - High airtight doors suitable for bio-related use, all SUS specifications are also available *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

Japan Airtech's "A.O.S (AIRTECH One stop Solution)" provides a comprehensive range of services, from clean rooms and equipment to building renovation work. This catalog introduces products in the "A.O.S" laboratory field, featuring equipment such as "central laboratory tables" and "draft chambers." Additionally, there is an "Appendix | Biosafety Cabinet," so please take a moment to read it. 【Contents】 ■ Laboratory Overview ■ Airflow Method ■ Ancillary Systems/Services ■ Equipment ■ Consumables/Accessories ■ Appendix | Biosafety Cabinet *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

Japan Airtech's "A.O.S (AIRTECH One stop Solution)" provides a comprehensive range of services, from clean rooms and equipment to building renovation work. This catalog introduces products from the "A.O.S" in the field of regenerative medicine. It includes "management systems," "bio-clean related equipment," and "cell processing related equipment." Additionally, it features "consumables and supplies" such as "clean suits" and "cleaning agents," so please take a moment to read through it. [Contents (partial)] ■ Overview of CPF ■ Management Systems ■ Bio-clean Related Equipment ■ Cell Processing Related Equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Clean Room
• others

This catalog introduces "Clean Room Equipment/Facilities." It includes products such as "Air Showers," "Pass Boxes," "Hand Dryers/Hand Washers," and "Large Particle Removal Devices/Dust Removal Devices." Additionally, it contains materials such as "Clean Room Cleanliness Standards." We encourage you to take a look. [Contents] ■ Clean Room ■ Access Control Equipment/Facilities ■ Peripheral Equipment for Clean Rooms ■ Internal Equipment for Clean Rooms ■ Exhaust Management Equipment ■ Clean Supply Products ■ Materials *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room
• others

This product is a dust collection filter installed between the waste liquid bottle and the suction pump when sucking contaminated waste liquid with a suction pump. It features an ultra-high-performance air filter manufactured in-house, which has low pressure loss and allows the suction pump to operate at maximum efficiency. Each filter is thoroughly inspected for dust collection efficiency, and inspection certificates can be issued. 【Features】 ■ Dust collection efficiency: 99.999% or higher ■ Prevents leakage of contaminants such as bacteria and viruses outside the device ■ Inspection certificate can be issued ■ Low pressure loss, maximizing the suction pump's power *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Equipment
• Parts and Materials

Safety cabinets (Class II cabinets for biohazard measures) require an annual regular inspection. Due to aging use, the balance of inflow and outflow airspeed may be disrupted due to filter clogging, which can result in inadequate performance. At Japan Air Tech, service engineers trained in specialized education and training handle inspections. We take care of everything from consultations to maintenance work. 【Consultation Process】 ■ Consult with your purchasing retailer ■ The retailer will contact us ■ A representative will reach out to you (number of units, model/serial number, condition of the equipment) ■ Various inspections and parts replacements ■ Inspection report sent *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other services and technologies

The main filter of the fan filter unit becomes less permeable to air as dust accumulates, resulting in a decrease in air velocity and volume. When used in general indoor environments, it needs to be replaced approximately every year, and when used in clean rooms (equivalent to Class 7), it should be replaced approximately every five years. To maintain performance, please ensure regular filter replacements. 【Replacement HEPA Filter Lineup (Partial)】 ■EC-MAC Series 　・CD3136617 　・CD3093669 ■SS-MAC Series 　・CD3125156 　・CD3123716 *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment

The clean partition filter has a yellow lamp indicating that its lifespan is nearly over, and a red lamp indicating that it is time for replacement. The dust collection efficiency of the "HEPA filter" we handle is over 99.99% for 0.3μm particles. We also offer a filter replacement sterilization kit (model: JK-01). If you have been using the same filter for over two years, please contact us even if the lamps are not lit. 【HEPA Filter Specifications】 ■ Model: CD3105509 ■ Dust collection efficiency: Over 99.99% for 0.3μm particles ■ Material: Filter medium - fiberglass / Frame - aluminum ■ Product weight: Approximately 3kg per piece *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment

The 『PEU02-20』 is a packaged exhaust unit that can create a negative pressure room when installed in examination rooms, hospital rooms, etc. The air supplied and exhausted is filtered through a HEPA filter to capture dust and viruses. The thickness of the main unit has been reduced by 80mm compared to conventional products, making it slimmer. Additionally, the installation direction of the exhaust chamber box can be selected from left or right, and it features an antibacterial coating as a measure against viral infections. 【Features】 ■ The air supplied and exhausted is filtered through a HEPA filter to capture dust and viruses. ■ It can clean the indoor environment and create a negative pressure room. ■ The thickness of the main unit has been reduced by 80mm compared to conventional products, making it slimmer. ■ A filter replacement indicator alerts you when it’s time to change the filter. ■ The installation direction of the exhaust chamber box can be selected from left or right. *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment
• Welfare and medical equipment

We offer a range of high-end laser particle counters with advanced features, including handheld types. They comply with ISO 21501-4 (JIS B 9921), and the optical system uses the side scattering method. The "laser particle counter" has a high flow rate, allowing for short measurement times, making it suitable for air cleanliness management in pharmaceutical and electronic device manufacturing environments. The "handheld particle counter" is equipped with a USB port and an SD card slot. 【Features of the Laser Particle Counter】 ■ Complies with ISO 21501-4 (JIS B 9921) ■ Short measurement time due to high flow rate ■ Suitable for air cleanliness management in pharmaceutical and electronic device manufacturing environments ■ Battery-operated ■ Display language options include Japanese and English *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce the vacuum cleaners we handle. The "Clean Room Vacuum Cleaner" has been specially developed for clean rooms. It is compact and lightweight, making it easy to handle, and its modular structure allows for easy maintenance. The "High Bioactive Agent Containment Vacuum Cleaner" contains hazardous substances such as high bioactive agents, protecting the operator. 【Features of the Clean Room Vacuum Cleaner】 - Compact and lightweight with a body weight of 6.8 kg - Easy to maneuver during cleaning, reducing the burden on the operator - Uses a dust bag system, allowing for waste disposal without direct contact - Modular structure for easy maintenance in case of malfunction - Available with a ULPA filter for higher dust collection efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BVE-1000Ti" is an air purifier with deodorizing function that incorporates a titanium oxide photocatalyst and a HEPA filter. By combining the photocatalyst and HEPA filter, it achieves a synergistic effect of deodorization and air purification, creating a comfortable living environment. The use of a UV-LED light source enhances the deodorizing effect, making it possible to reduce odor substances such as acetaldehyde, ammonia, and trimethylamine. It can operate in a way that suits the room environment, from high airflow specifications to low noise specifications. 【Features】 ■ Combination of photocatalyst and HEPA filter ■ Achieves a synergistic effect of deodorization and air purification for a comfortable living environment ■ Improved deodorizing effect through the use of UV-LED light source ■ Capable of reducing odor substances such as acetaldehyde, ammonia, and trimethylamine ■ Includes a lifespan display function for the HEPA filter *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "Clean Viewer" is a product that visualizes the airflow conditions in clean rooms and clean equipment. The use of fine mist with a particle size of 3μm makes it easy to confirm airflow. In addition to the AC100V power supply specification, a convenient battery-operated version is also available. The ULPA filter specification allows for airflow visualization at ISO Class 4 (Class 10) (optional). 【Features】 ■ Visualizes airflow conditions in clean rooms and clean equipment ■ Easy airflow confirmation with fine mist of 3μm particle size ■ Available in both AC100V power supply specification and a convenient battery-operated version ■ ULPA filter specification enables airflow visualization at ISO Class 4 (Class 10) (optional) ■ Dust collection efficiency of over 99.97% for 0.3μm particles *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "AHW-06" is a high-speed hand dryer that allows for quick hand washing and drying using dust-free, sterile air purified by a HEPA filter. It is ideal for hand washing and drying in a clean environment for operators. The adoption of a DC brushless motor has improved drying performance due to the increased airflow. The exterior of the unit features an inorganic silver-based antibacterial coating, allowing for quick drying at a wind speed of 80 m/s. Improvements in the body structure have achieved reduced airflow leakage. 【Features】 - Ideal for hand washing and drying in a clean environment for operators - The exterior is coated with an inorganic silver-based antibacterial paint - Quick drying possible at a wind speed of 80 m/s - Equipped with a sterilization lamp as standard - Automatically turns off when a person is detected *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

We would like to introduce the "Fan Filter Unit" and "Pipe Hood" that we handle. The "Fan Filter Unit" is a ceiling-mounted fan filter unit. It disperses clean air over a wide area through the diffusion plate on the discharge surface. It is also compatible with duct connections. The "Pipe Hood" is easy to assemble, compact, and can be installed on a workbench, providing a convenient way to achieve a clean environment. 【Features of the Fan Filter Unit】 ■ Ceiling-mounted fan filter unit ■ Disperses clean air over a wide area through the diffusion plate on the discharge surface ■ Compatible with duct connections ■ Comes with a flange for duct connection ■ ULPA filter specifications are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Welfare and medical equipment

The "Differential Pressure Damper" is a product that maintains a constant pressure in a clean room by allowing the blades to slide in response to pressure fluctuations within the room. In a clean room, it is necessary to maintain positive pressure inside to prevent the intrusion of contaminated outside air. This product keeps the indoor pressure at a constant positive level, even with fluctuations caused by the opening and closing of entrance doors or changes in exhaust volume. The control pressure can be adjusted in four stages from 10 to 40 Pa, using weights for differential pressure adjustment, with a pitch of 10 Pa. The standard installation wall thickness ranges from 40 to 90 mm. 【Features】 ■ Maintains a constant pressure in the room by allowing the blades to slide in response to pressure fluctuations within the clean room. ■ Control pressure can be adjusted in four stages from 10 to 40 Pa, using weights for differential pressure adjustment, with a pitch of 10 Pa. ■ Standard installation wall thickness ranges from 40 to 90 mm. ■ There is also a fire damper with a built-in fire shutter (optional). *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "Fine View Clean Booth" is a product that achieves high transparency by attaching vinyl curtains to a frame without wrinkles. Even when the booth is under positive pressure, the vinyl does not bulge. By combining standard dimensions, it can also accommodate larger sizes. It is available in Class 1000 (T6) and Class 10000 (T7). The filter unit is MAC-IIA-251DC×1 for T6 specifications and MAC-IIA-151DC×1 for T7 specifications. 【Features】 - A clean booth with wrinkle-free transparency achieved by attaching vinyl curtains to a frame - The vinyl does not bulge even when the booth is under positive pressure - Can accommodate larger sizes by combining standard dimensions - Available in Class 1000 (T6) and Class 10000 (T7) - Dust collection efficiency of 99.99% or higher for 0.3μm particles *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "SS Clean Bench" is a self-setting clean bench that offers short delivery times, low prices, and easy assembly. Thanks to standardization, it can be delivered quickly and can be easily installed in about three hours using common tools. It features an aluminum frame, significantly reducing its weight. The dust collection efficiency is over 99.99% for particles of 0.3μm. 【Features】 ■ Easy-to-assemble self-setting design ■ Short delivery times due to standardization ■ Can be easily installed in about three hours using common tools ■ Lightweight design with an aluminum frame ■ Dust collection efficiency of over 99.99% for 0.3μm particles *For more details, please refer to the PDF materials or feel free to contact us.

• Welfare and medical equipment

The "APC-43 model" is a compact and lightweight portable clean bench. It features an energy-saving design with a high-efficiency DC brushless motor, making it easy to move due to its lightweight. It can be operated indoors using the included AC adapter. For outdoor use, an optional portable power supply is required. The front and side panels of the storage method are easy to assemble, and when stored in the dedicated aluminum case, it is easy to carry. 【Features】 ■ Energy-saving design with a high-efficiency DC brushless motor ■ Easy to move due to its lightweight ■ Can be operated indoors using the included AC adapter ■ Front and side panels of the storage method are easy to assemble ■ Easy to carry when stored in the dedicated aluminum case *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "KVM-7 model" is an energy-efficient, high-performance tabletop clean bench. It features a high-efficiency DC brushless motor and energy-saving LED lighting. The adoption of an inclined sliding shutter has improved operability. It comes standard with a sterilization lamp, which only lights up when the sliding shutter is fully closed due to an interlock mechanism. 【Features】 ■ Energy-efficient, high-performance tabletop clean bench ■ High-efficiency DC brushless motor and energy-saving LED lighting ■ Improved operability with the adoption of an inclined sliding shutter ■ Standard equipped with a sterilization lamp ■ The sterilization lamp lights up only when the sliding shutter is fully closed due to an interlock *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

The "Light Clean Bench" is an affordable type of simple clean bench. There are two types: vertical airflow type (L-VS) and horizontal airflow type (L-HS), which can be selected based on the intended use. The series includes two models, 1002 and 1302, with the vertical airflow type (L-VS) offering three height options for the work chamber: K, L, and M. Additionally, an optional electronic ignition gas burner and sterilization lamp are available. 【Features】 - Available in vertical airflow type (L-VS) and horizontal airflow type (L-HS) - Lightweight with a simple unit structure - Includes a lifespan indicator - Two models in the 1002 and 1302 series - Dust collection efficiency of over 99.99% for 0.3μm particles *For more details, please refer to the PDF materials or feel free to contact us.

• Welfare and medical equipment

The "BCM-4 type" is a bioclean bench that allows for operation from both sides and enables partial exhaust by switching the damper. The air curtain airflow isolates the work area, and within the working range, laminar flow allows for highly reliable aseptic operations with minimal bacterial dispersion. During exhaust, the work chamber maintains a slight negative pressure, and the cleanliness level can be kept at ISO Class 5 (Class 100) using a special airflow system. The intake slits on the work surface are equipped with a drop prevention net. 【Features】 ■ Fully recyclable design, suitable for aseptic operations such as tissue culture ■ During exhaust, the work chamber maintains a slight negative pressure and cleanliness level at ISO Class 5 (Class 100) ■ High-efficiency DC brushless motor adopted ■ Equipped with a sterilization lamp and an electronic ignition gas burner ■ The intake slits on the work surface are equipped with a drop prevention net *For more details, please refer to the PDF document or feel free to contact us.

• Welfare and medical equipment

"I want to create a clean room, but I don't know where to start. I feel it would be difficult to have meetings with many contractors, so I would like one company to handle everything." Do you have such concerns? Japan Airtech can solve those problems all at once. Our representatives will conduct thorough hearings, explain the necessary details, and provide flexible proposals tailored to your circumstances and wishes. We handle everything with one company to reduce your burden. We use equipment that complies with carbon neutrality from a manufacturer specializing in clean air systems, offering a wide range from simple types to high-purity clean rooms. Please feel free to contact us when you need assistance. 【Features】 ■ Our dedicated project team will provide proposals tailored to you. ■ We handle everything from consultation to construction and post-delivery support with one company. ■ We provide high-standard clean rooms from a specialized manufacturer. ■ We have numerous delivery achievements nationwide. *For more details, please refer to the related links or feel free to contact us.

• Clean Room

The "AFU-C-25" is a horizontal intake type clean filter unit suitable for duct connection. The flat discharge surface blows clean air over a wide area, making it easy to connect to ducts even without clearance from the ceiling. We offer a ULPA filter specification for a cleaner cleanroom environment. 【Features】 ■ The flat discharge surface blows clean air over a wide area ■ Easy duct connection even without clearance from the ceiling ■ Comes with a matching flange for duct connection specifications ■ ULPA filter specification available for a cleaner cleanroom environment *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room

This product is a fan filter unit equipped with a DC brushless motor. It allows for easy installation of an ionizer (MIG-15) without additional processing. It features a powerful static elimination type using DC discharge, with a multi-needle structure consisting of four positive and four negative needle electrodes, which generates a large amount of ions and maintains good balance. Additionally, the discharge needles are pin connector type, making maintenance easy. 【Features】 - Easy installation of the ionizer (MIG-15) without additional processing - The needle electrodes have a multi-needle structure with four positive and four negative needles, generating a large amount of ions and maintaining good balance - The discharge needles are pin connector type, making maintenance easy - Connect the MAC-15 and MIG-15 using a linked power outlet for coordinated operation - Built-in LED power switch (green) for easy visibility of operating status, with a high voltage abnormality alarm lamp (red) *For more details, please refer to the PDF documentation or feel free to contact us.

• Clean Room

The "EC-MAC" lower maintenance series is a fan filter unit equipped with an LED operation indicator that allows for easy visibility of the operating status. It is possible to replace the main filter while the product is installed. If there is no maintenance space in the ceiling area of clean booths, the replacement work can be done from inside the unit. Additionally, we offer a special filter specification of "EC-MAC" that removes hazardous substances such as hydrofluoric acid and siloxane, which are causes of industrial product defects, to reduce risks. 【Features】 ■ Designed for in-unit maintenance ■ Available in AC and DC specifications ■ The main body is made of stainless steel ■ Installation height can be adjusted from 0 to 125mm using mounting brackets ■ Equipped with an LED operation indicator for easy visibility of the operating status *For more details, please refer to the PDF document or feel free to contact us.

• Clean Room