バンザイ List of Products and Services

Eco Super Fine promotes the biodegradation of dirt (organic matter) and has the effect of detaching and decomposing dirt. By adjusting the dilution rate according to the degree of dirtiness, it demonstrates remarkable cleaning effects. When used at a dilution rate of 200 times, it is possible to create 200 liters (equivalent to one drum) of cleaning solution from 1 kg of Eco Super Fine.

• others

Thrust of 25 tons, height of 222 mm, compatible with large vehicles to commercial one-box vehicles. With handle switching, it can perform pushing operations from multiple directions: front, back, left, and right, and it is possible to release tire embedding with reverse operation.

• others

Capacity: 4.0 tons The drive-on lift is longer and wider than before, expanding the range of compatible vehicles, including microbuses. Safety features have evolved, making it even safer.

• others

Capacity of 3.2 tons, lifting height of 900mm, and a minimum height of 100mm make it easy to drive vehicles onto it. Using the included mobile kit allows for easy movement of the lift. It is the perfect lift for efficient use of space.

• others

Capacity 7.0 tons per unit The lift can be safely raised as the forks are inserted into the tires from the outside of the vehicle. It employs an electric screw mechanism, so in the unlikely event of a malfunction, it will simply stop without the risk of falling. Reliable synchronization between the columns ensures that the lifting height difference between lifts is controlled within acceptable limits. The standard configuration is 4 units. For articulated buses, there is a 6-unit configuration, and a maximum of 8 units is available. Capacity 8.5 tons per unit The lift can be safely raised as the forks are inserted into the tires from the outside of the vehicle. Communication between the lifts (columns) is established wirelessly for synchronization. The lift's power source uses a rechargeable battery, eliminating the need for wiring during use. The standard configuration is 4 units. For articulated buses, there is a 6-unit configuration, and a maximum of 8 units is available.

• others

Capacity: 2.5 tons This is a pantograph lift of the floor-mounted type and the embedded installation type, with the main body of the lift made as thin as possible. The upper receiving platform comes in a lineup of plate type, slide plate type, and plate-arm combined type. The floor-mounted type allows for easy layout changes. The hydraulic unit is a separate type, and the height of the electrical components is 600 mm or more.

• others

Hydraulic presses are widely used not only in automotive repair shops for tasks such as replacing cylinder sleeves, correcting crankshaft bends, and inspections, but also in construction and civil engineering machinery. The frame is not U-shaped but open on both sides, making it convenient for working with long items like propeller shafts.

• others

Capacity 3.0 tons This lift offers exceptional stability, allowing for a more secure lift of vehicles with its four-column design. In addition to the maintenance four-column lift, there is also a lineup of alignment-spec lifts. It can be installed underground, making it easy to perform lift-up maintenance on low-floor vehicles and more. Capacity 3.5 tons Compatible with small trucks and microbuses This drive-on lift provides outstanding stability, allowing for a more secure lift of vehicles with its four-column design.

• others

Capacity: 3.5 tons This is an embedded cylinder-type lift that emphasizes both workability and safety in automotive maintenance. Equipped with two hydraulic circuits, safety has been dramatically improved. With a total of four cylinders, two on each side, it offers outstanding stability. The flat kit ensures that the floor remains flat during lifting, allowing for comfortable and safe maintenance. Lifting can be done using a sliding plate or swing arm. When using the arms, quick receiving brackets allow for speedy setup.

• others

You can safely and quickly perform the installation and removal of transmissions. The HMJ series allows the receiving platform to tilt forward, backward, left, and right. It is a labor-saving device that offers high safety, enabling one person to install and remove the transmission while the vehicle is lifted. A hydraulic jack that makes it easy to install and remove various types of transmissions. The receiving plate can be tilted, allowing it to fit the transmission perfectly.

• others

Easily movable with large-diameter wheels, it can be smoothly maneuvered in tight spaces, significantly improving the efficiency of undercarriage service for large vehicles. Safety is enhanced with vertical lifting and an automatic locking mechanism. Being air-driven, it is easy to operate and reduces labor effort.

• others

This is a device that allows the drive axle without speed detection to spin freely during speed measurement of a full-time 4WD vehicle. It needs to be installed according to the target wheelbase. The effective measurement lengths are 1500 mm for the standard version and 1000 mm for the short version. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Eminent Alpha IV" is a gantry car wash machine that enhances cleaning and drying power while reducing wash time, achieving more efficient car washing. In addition to the "B-PRO Foam Mode," which makes it easier to remove stubborn dirt, it features a "Iron Powder Removal Mode" designed specifically for iron powder removal, allowing for efficient price increases. It uses 43L of water per unit and achieves a washing speed of 82 seconds. Additionally, the frame is made of a "Fortress Frame" that has high rust resistance. 【Features】 ■ Achieves efficient car washing ■ Equipped with NEW coating ■ Offers a wide range of options ■ Improved cleaning ability: Equipped with B-PRO Foam Mode and Iron Powder Removal Mode ■ Customized to company specifications: Car wash support tailored to customer needs *For more details, please refer to the PDF document or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor
• others

The "Laundry Series" is an auto parts washer that can clean everything from small components to large vehicle parts. Dirt on parts is eliminated with our proud high-power jet spray. Additionally, there is no need to worry about corrosion or rust even after long-term use. We can also manufacture a big type suitable for cleaning V-type 12-cylinder engine blocks and marine engines, so please feel free to consult us first. 【Features】 ■ Equipped with a top runner motor ■ Powerful cleaning with a high-power pump ■ Thorough washing from small to large items ■ Clean with strong detergents ■ Waste liquid is forcibly discharged by a pump ■ Stainless steel body eliminates concerns about rust *For more details, please refer to the PDF materials or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor
• others

The "Eagle Advance Lift" is an arm lift designed with a symmetrical structure that allows for easy lifting of vehicles in both forward and backward directions. With a pantograph structure and a machine thickness of 580mm, this arm lift can be used in multi-level settings. It accommodates a wide range of vehicle types and is easy to set up. The lift distance when raised is sufficiently secured, making it easy to perform work underneath the vehicle, such as heavy maintenance. Additionally, it prevents caster wheel detachment, ensuring safe operation. 【Features】 ■ Dimmable LED lighting standard equipment ■ Three-stage sliding arm ■ Symmetrical design allows for lifting from either the front or back ■ Compact installation possible ■ Flat and comfortable space at foot level *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog introduces our lineup of lift attachments. It features the "G Series," including the high-quick hitch (GQH101) and the flanged track hitch (KNR107), as well as the "F Series," which includes the concave hitch (FQL102) and the A-type hitch (FQH109). Additionally, we provide usage examples, lift conversion adapter options, a quick reference chart for compatible hitches, and related products. Please use this information to assist in selecting products. [Contents] ■ G Series ■ F Series ■ Usage Examples ■ Lift Conversion Adapter Options ■ Quick Reference Chart for Compatible Hitches ■ Related Products *For more details, please refer to the PDF document or feel free to contact us.

• others

This is a tester that measures the noise of automobiles and the volume of horns. It requires certification by the Japan Quality Assurance Organization (JQA) once every five years. 【Features】 ● By simply turning on the power and pressing the start button, it can simultaneously display and measure instantaneous values and maximum values. ● It is equipped with three measurement functions: - Time-weighted sound level Lp (instantaneous value) - Time-averaged sound level Leq - Maximum time-weighted sound level Lmax ● With an "organic EL display" that is easy to see even in dark places, the numerical display is easy to read, and it features a bar graph display that clearly shows noise fluctuations. ● It has a power-saving design that allows for continuous operation for over 9 hours using two AA batteries (alkaline batteries or nickel-metal hydride rechargeable batteries). *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Opasimeter GSM-210 Series" is a diesel vehicle exhaust gas measuring device that complies with the technical standards established by the revision of the Road Transport Vehicle Act Enforcement Regulations. It is designed to be less affected by external light, and the optical system is easy to clean. The "GSM-210R" allows for easy operation with the main unit and a wireless remote control, and it can indicate accelerator operation with a countdown and "press" / "release" lamps. 【Product Lineup】 ■ GSM-210R (with wireless remote control) ■ GSM-210 (with wired remote control) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MEXA-324M" is an automotive exhaust gas measuring device that allows for easy Japanese display. It measures carbon monoxide (CO) and hydrocarbons (HC) in automotive exhaust gases using the non-dispersive infrared absorption (NDIR) method, easily and with high precision. During inspections and checks at automotive repair shops, as well as during general engine adjustment work, accurate exhaust gas concentrations can be quickly determined. 【Features】 ■ Notification of "Measurement" and "Standby" with color-coded text ■ User-friendly Japanese display ■ Clear visibility from diagonal angles and distant positions ■ Newly developed drain separator adopted ■ New material sampling tube adopted - For orders of some consumables, click here: https://www.amazon.co.jp/dp/B0B59R3NDK/ref=twister_B0BBYS7V1M?_encoding=UTF8&th=1 https://www.amazon.co.jp/dp/B0B57XVBXB *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Opacimeter MEXA-600SW" is a light transmission smoke meter that complies with new regulations for particulate matter testing (PM testing) using an opacimeter. Compared to conventional light reflection black smoke meters, it offers superior measurement accuracy and reproducibility, allowing for more precise measurements even at low smoke concentrations. It features a wireless remote control, providing excellent operability. 【Features】 ■ Compact and portable ■ Remote operation possible while seated in the driver's seat ■ Wired connection also available ■ Easy vehicle selection ■ Rounding off judgment values for reporting *For more details, please refer to the PDF document or feel free to contact us.

• others

The "DPF Cleaner for Diesel Vehicles" allows anyone to easily and effectively clean the DPF. The cleaning gun comes in a wide-angle type that can clean large areas and a direct injection type that is effective for severely clogged DPFs. They can be easily swapped. Additionally, it is equipped with a high-capacity pump of approximately 2400L/h, which flushes out dirt clogged in the DPF using water volume and pressure. 【Features】 ■ Compatible with various sizes of DPFs ■ Uses approximately 100L of circulating water ■ Equipped with a high-capacity pump of approximately 2400L/h ■ Adopts a two-tank structure that makes it difficult for dirt to circulate ■ Comes standard with two types of cleaning guns and an air blow gun *For more details, please refer to the PDF document or feel free to contact us.

• others

The "OK Klima Series" is a fully automatic refrigerant recovery and recycling device equipped with a "fully automatic cleaning function." It is capable of completely extracting gas from the vehicle, recycling it, recharging it, and replenishing oil, all automatically without starting the engine. We offer a lineup including the dedicated R-1234yf machine "OKC-1234AD" and the dual-use machine "OKC-DUAL," which supports both R-134a and R-1234yf gases. 【Features】 ■ Fills the specified amount of gas ■ Built-in cylinder heater ■ Supports service for hybrid vehicles ■ Automatic oil quantity setting is also possible ■ Compatible with HV and EV *For more details, please refer to the PDF materials or feel free to contact us.

• Gas equipment

- It has obtained type certification for the "inspection scan tool," so it can be used for OBD inspections. Of course, it can also be used as a "maintenance scan tool." - It supports ISO13400 (DoIP), and during inspections, you can choose between wireless or wired connection with Windows devices. - It comes standard with essential functions that are indispensable for a scan tool. - It continues to include convenient features such as maintenance mode and DPF mode, which were well-received in the MST-7R. - The MST series continues to offer robust diagnostic functions and after-sales support. 【Features】 ■ Standard support for 23 manufacturers ■ 3-year update/device warranty and 1-year repair support for peace of mind ■ Easy updates in 3 steps ■ Number registration function ■ Automatic vehicle selection function *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

We would like to introduce the "Aiming-related Equipment" that we handle. Starting with the "Center Support Navi," which is used to derive the vehicle's centerline, we offer a variety of support equipment for aiming tasks, such as the "Positioning Stand," which can efficiently derive perpendicular lines to the vehicle's centerline when used in combination. Without using support equipment, it is necessary to spend 2 to 3 people and a long time to determine the target installation position, but by using support equipment, one person can set up the target in a short time. 【Product Lineup】 ■ Center Support Navi ■ Center Support Navi Cross ■ Positioning Stand ■ Side Line Guide ■ Multi Aiming Board ■ Multi Aiming Board 2 ■ Aiming Target ■ Radio Wave Absorption Panel/Sheet *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Yosamu Cam Alignment" is a large vehicle alignment tester that achieves both speedy and high-precision measurements. Measurements can be taken easily by selecting each measurement mode and following the graphics. The measurement results can be managed on a computer, allowing for display switching by each axle or all axles. With the adoption of a lightweight and compact camera sensor (optical type), rolling runout measurement has been newly added in addition to jack-up runout measurement. 【Features】 ■ Responds to the increasing demand for large vehicle alignment ■ Adopts a lightweight and compact camera sensor ■ Achieves both speedy and high-precision measurements ■ Easy-to-understand and visually clear animations ■ Multi-selectable measurement modes tailored to the situation *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce our wheel balancer, the "Formula Vector Series." The "VA801/2" automates everything from inputting wheel information to balance measurement, significantly improving work efficiency. The graphic display panel is very easy to understand and also helpful for explaining to customers. In addition, we offer the entry-level model "VA601/2," which requires manual input of wheel information and is specialized for balance measurement, as well as the "V9901/2," which comes standard with a weight cutter. 【Product Lineup】 ■VA801/2 ■VA601/2 ■V9901/2 *For more details, please refer to the PDF document or feel free to contact us.

• Lifting and transport system

The "GeoLiner GL-680XD" is a 3D alignment tester equipped with a variety of measurement and adjustment modes suitable for total diagnostics. As an optical alignment tester, it measures alignment by using a camera unit to assess targets (reflectors) attached to the tires. The camera unit is connected on both sides and is installed at the front of the vehicle, but due to its compact installation position, which is 1.5m from the front target, it minimizes interference with factory equipment. 【Features】 ■ Measurement time is approximately 5 minutes for quick measurements ■ For quick measurements of toe and camber only, the vehicle needs to be moved a total of 30° forward and backward ■ Targets can be easily attached using tire clamps ■ The height of the camera unit can be adjusted using the keyboard *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce the "Wheel Dolly" that we handle. The "WDM-5001/5001A/5000N-2" is an all-purpose type that can be used in various ways. By using the optional brake drum attachment, it can also be used as a brake drum dolly. In addition, we offer the "WDM-3000," which allows for quick and easy tire removal and installation, and the "HPWD-3000," which enables tire work at a high position. 【Product Lineup】 ■ General-purpose: WDM-5001/5001A/5000N-2 ■ Long stroke: WD-400LSA ■ Pallet type: WD-400PH-TP ■ Rail-moving type: WSL-WD-J3 ■ Mini type: WDM-3000 ■ High position type: HPWD-3000 *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

What is required of testers for diagnostic and proposal businesses is "speed," "high precision," and "ease of understanding." The "Microline Easy 3D Plus" is an optical alignment tester equipped with specifications suitable for this "diagnosis and proposal." It detects the shape of targets mounted on the wheel with a camera, measures the angle changes of the targets, and assesses the alignment. It allows for easy, efficient, and high-precision alignment measurements. 【Features】 ■ High precision measurement with 4 targets and 8 cameras ■ Measurement items equivalent to 8-sensor systems ■ Measurement time of 5 minutes, speedy ■ Can measure on lifts or floors ■ Space-saving unique camera layout ■ Suitable for measuring low-floor and customized vehicles *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The "MON-8800P" is a newly designed leverless tire changer that employs Hoffmann's unique "power tool." Equipped with an automatic mechanism for tool operation, it allows for easy handling of high-difficulty tire changes by a single person. It also features a side bead breaker, enabling efficient handling of normal-sized tire changes. Additionally, we offer the "MON-3300SAX," which comes standard with a tire support arm for more comfortable tire mounting and dismounting, as well as the standard model "MON-3300 series," which has expandability. 【Features】 ■ Newly designed dedicated power mount tool dynamic bead breaker ■ Electric quick lock ■ Side bead breaker included ■ Color control panel & color monitor ■ Attachments specified by European car manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Geodyna Series" is a balancer that can accurately and reliably clamp wheels simply by pulling up the pedal. Since the wheel guard is retractable, it can be installed in a space-saving manner. When the weight mounting gauge is extended, the wheel automatically locks. With two sensors located in the same environment, it is less susceptible to influences such as humidity, temperature, and shock, achieving stable high-precision measurements. 【Features】 ■ VPM System ■ Electric Power Clamp ■ Slide Retractable Wheel Guard ■ IN-OUT Phase Stop Function ■ Automatic Wheel Lock Function *For more details, please refer to the PDF document or feel free to contact us.

• Lifting and transport system

The "Hybrid Type-S" is an electric automatic air bleeding and replacement machine that supports the efficiency of service for vehicles ranging from light to large sizes. The pressure pump has been upgraded to 1.5 times its conventional power. This enables smoother brake fluid replacement and allows for more efficient air bleeding of booster clutches in large trucks. With a dehumidifying device, the management of brake fluid is thoroughly ensured, and since the electric pump is used to pressurize the brake fluid, after setting it up, you only need to loosen the wheel's bleeder plug to perform fluid replacement and air bleeding. 【Features】 ■ Pressure pump upgraded to 1.5 times its conventional power ■ Realization of new technology and energy saving ■ Allows anyone to perform uniform work ■ Easy operation with universal adapters and vehicle-specific dedicated adapters ■ Compatible with ABS, ECB, and equipped vehicles *For more details, please refer to the PDF document or feel free to contact us.

• pump
• Air compressors, blowers and pumps

Class 4 hazardous materials, which are flammable liquids, have specified quantities determined by law for each classification, and storage and handling amounts are established. When storing or handling small quantities of hazardous materials, standards are set by the fire prevention regulations of each municipality, and prior consultation and notification with the relevant fire department are required. The "BB Series" is a storage cabinet for small quantities of hazardous materials equipped with a forced ventilation system that rotates with wind power as standard. The floor, sloped at 1/100, uses corrugated steel plates, ensuring that any spilled materials collect in the sump under the ventilator. 【Features】 ■ Elevated floor design eliminates the need for pit construction ■ Low elevation height of H200mm means no steps are required ■ Quick installation is possible ■ Customization is available upon request ■ Door position changes and double-opening doors can also be accommodated *For more details, please refer to the PDF materials or feel free to contact us.

• Storage Container

With the CVT/AT fluid check sensor, you can easily perform a fluid diagnosis in just 30 seconds. You can choose from three fluid exchange modes according to your needs, developed with the themes of simplicity, short time, and reliability. Additionally, the oil quantity adjustment temperature range has become temperature-free, from low to high temperatures. The diagnostic results printed out can be presented to customers, allowing for proposals for transmission maintenance and fluid sales. 【Features】 ■ 3 modes CVT/AT fluid check sensor ■ Integrated oil drain structure ■ 3-mode fluid exchange system ■ Automatic residual oil discharge function ■ Compatible with all domestic passenger cars and light vehicles Purchase some optional items and consumables here: https://www.amazon.co.jp/dp/B0B57XY6FR *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog introduces Banzai's "Oil Service System." It focuses on the basic car maintenance task of oil changes, which are repeatable, managing each function from refueling to waste oil disposal in a way that connects them with the shortest possible workflow. This achieves ideal work efficiency and labor conditions. We hope you will find this product useful as part of your service strategy. Please use it for selecting products. [Contents] ■ Refueling System ■ Oil Supply and Waste Oil System ■ Waste Oil System *For more details, please refer to the PDF document or feel free to contact us.

• Emergency alarm system

We would like to introduce our high-pressure hot water washer, the "Nice Hot Series." Starting with the environmentally friendly "Basic Type," which matches the ECO era, we also offer the "Energy-Saving Type," where the motor automatically stops when not in use, cutting unnecessary electricity. Additionally, we have a variety of "car wash equipment" that can be combined with under washers, gantry car wash machines, and seat cleaners to improve work efficiency. 【Product Lineup】 ■ Basic Type - KHW-1100D2 / KHW-1300D - KHW-1600C / KHW-2100C ■ Energy-Saving Type - NHW-1000JS, 1500I, 2000I / CWH-R16V3 ■ Super Big Type - NHW-5000HS / PNW-5000BS - For orders of some consumables, click here: https://www.amazon.co.jp/dp/B09Y62BLPF?th=1 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Flat Work Stage X (4-ton specification)" features a two-stage lifting speed and is an X-link drive-on lift that makes height alignment easy. It ensures high precision runway leveling within 1mm on the left and right, and within 2mm diagonally front and back. Even at the lower limit position, the horizontal accuracy is high. The overall length and width have been significantly increased compared to conventional models, making it easier to drive in wider vehicles, while the inner width remains the same as conventional models, allowing for safe lift-up of compact cars. 【Features】 ■ Drive-on lift / Freewheel lift ■ Electronic control step correction function ■ Increased rigidity of the lift ■ Long and wide runway ■ Flat kit included as standard *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Gate Lift IV Series" is a gate-type two-column lift that has transitioned from a lever system to a wired remote control. When it rises 200mm from the lower limit, it automatically locks with a gear engagement system. It allows for wide opening of doors on passenger cars, RVs, etc., making it easy to get in and out, and enabling efficient work. Additionally, it employs a silent mechanical lock system to reduce noise during lift ascent, and with LED lighting, work under the vehicle can be done with both hands without the need for a work light. 【Features】 ■ Improved operability with a compact and lightweight wired remote control ■ Shortened movement paths during lift-up operations ■ Generous capacity of 3.7t accommodating a wide range of vehicle types ■ Clean and flat workspace at the feet *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Flat Work Stage X (5-ton specification)" is an X-link drive-on lift equipped with various safety mechanisms for safe operation. With a lifting capacity of 5 tons, it can accommodate an even wider range of vehicle types compared to conventional models. The rigidity of the lift body has also dramatically increased with the enhanced capacity. The new control panel, equipped with a small monitor, features a liquid crystal touch panel that can display various information such as lift usage time and frequency, power consumption, CO2 emissions, and warnings during lift malfunctions. 【Features】 ■ Dramatically increased lifting capacity and body rigidity ■ Equipped with safety devices ■ Standard flat kit included ■ New control panel included ■ Standard pit lift included ■ Two-speed lift raising and lowering * For more details, please refer to the PDF materials or feel free to contact us.

• lift

This product is a pantograph lift that offers excellent stability and accommodates a wide range of vehicle types and services. The floor remains flat during both ascent and descent, creating a service environment with good workability and ease of installation. For RVs and trucks with high lift points, the arms can be set after raising the lift, making it compatible with a wide range of vehicle types and easy to set up. 【Features】 ■ Capacity: 3.2 tons, Lifting height: 1.8 m ■ Compatible with RVs and small trucks ■ Achieves a flat working surface without worrying about foot placement ■ The floor remains flat during ascent and descent, enhancing the aesthetics of the workshop ■ Energy-saving design that can be used with an air pressure of 0.4 MPa *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Gojakki" is a simple vehicle movement unit that allows for easy lifting and relocation. It features a dual-claw ratchet for lifting and lowering, providing stability with a low center of gravity, and does not require power sources such as electricity, hydraulics, or air. Additionally, we offer a dedicated rack "456" for the Gojakki that can hold two sets (four units) and is equipped with casters for easy movement. 【Features】 ■ Combines lifting (jack) and dolly (movement) functions simultaneously ■ Stable with a low center of gravity, requiring no power sources such as electricity, hydraulics, or air ■ Lifting and lowering can be differentiated using a dual-claw ratchet ■ No contact points with the vehicle other than the tires, eliminating concerns about damaging the car ■ An L-type pedal that is easy to step on has been added (6313-L) *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack

The "Gate Lift III Series" enhances workability and safety, featuring a versatile lift that refines basic functions. Without a left-right connecting base, vehicle entry and exit is easy. The mission jack and work cart allow for free movement, eliminating tripping hazards during work. It supports a wide range of vehicle types and services, ensuring comfortable service. 【Features】 ■ Compatible with a wide range of vehicle types and services ■ Clean and flat workspace ■ Mechanical lock activates at a height of 60mm from the lowest point ■ Automatic lock engages with a gear engagement mechanism when raised 200mm from the lowest point ■ Front and rear arms utilize a three-stage telescopic arm *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Gate Lift Slim II" is a floor-mounted gate lift that can accommodate a wide range of services, from light passenger cars to small trucks. It is equipped with essential functions required for safety and operability. The arm sway prevention device prevents the arm from rotating and disengaging from the lifting point in the event that the vehicle lifts off the set receiving plate. Additionally, it allows for easy ascent with a push button, descent with a lever, and mechanical lock release with just one touch. 【Features】 - Minimum receiving plate height of 120mm, making it easy to set up for low-floor vehicles - Smooth ascent and descent with electric hydraulic and wire synchronization - Standard inclusion of a screw-type receiving plate for easy height adjustment - Rack and claw type mechanical lock to reliably prevent unexpected descent - Roof sensor detects the ascent limit and automatically stops *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog introduces our link-type drive-on lift, the "Work Stage X Series." Capacity: 3.2 tons. X link-type drive-on lift. Vehicles can be driven on and quickly lifted up. It is ideal for quick maintenance tasks such as oil changes and undercarriage inspections. We will propose the most suitable model from a rich lineup of 24 models that match your intended use. In addition, we also offer 4-ton and 5-ton models that can accommodate the required lift levels for various alignment testers. [Featured Products (Partial)] ■ WSX-F230 Series ■ WSX-F231 Series ■ WSX-N230 Series ■ WSX-N231 Series *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog summarizes the "garage jacks" that our company handles. In addition to "garage jacks," we also feature "air-operated garage jacks" and "aero oil jacks." With a full lineup that accommodates a wide range of vehicle types and service scenes, they serve as the mechanic's hands and feet, contributing to a variety of services. Please use this for selecting products. [Featured Products (Partial)] <Garage Jacks> ■SJ-20L-2 ■M-200DX ■SJ-30H ■SJ-50H *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack