バンザイ List of Products and Services

The "Gojakki" is a simple vehicle movement unit that allows for easy lifting and relocation. It features a dual-claw ratchet for lifting and lowering, providing stability with a low center of gravity, and does not require power sources such as electricity, hydraulics, or air. Additionally, we offer a dedicated rack "456" for the Gojakki that can hold two sets (four units) and is equipped with casters for easy movement. 【Features】 ■ Combines lifting (jack) and dolly (movement) functions simultaneously ■ Stable with a low center of gravity, requiring no power sources such as electricity, hydraulics, or air ■ Lifting and lowering can be differentiated using a dual-claw ratchet ■ No contact points with the vehicle other than the tires, eliminating concerns about damaging the car ■ An L-type pedal that is easy to step on has been added (6313-L) *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack

The "Gate Lift III Series" enhances workability and safety, featuring a versatile lift that refines basic functions. Without a left-right connecting base, vehicle entry and exit are easy. The mission jack and work cart allow for free movement, eliminating tripping hazards during work. It accommodates a wide range of vehicle types and services, supporting comfortable service. 【Features】 ■ Compatible with a wide range of vehicle types and services ■ Clean and flat workspace ■ Mechanical lock activates at a height of 60mm from the lowest point ■ Automatic lock engages with a gear engagement mechanism when raised 200mm from the lowest point ■ Front and rear arms utilize a three-stage telescopic arm *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Gate Lift Slim II" is a floor-mounted gate lift that can accommodate a wide range of services, from light passenger cars to small trucks. It is equipped with essential functions required for safety and operability. The arm sway prevention device prevents the arm from rotating and disengaging from the lifting point in the event that the vehicle lifts off the set receiving plate. Additionally, it allows for easy ascent with a push button, descent with a lever, and mechanical lock release with just one touch. 【Features】 - Minimum receiving plate height of 120mm, making it easy to set up for low-floor vehicles - Smooth ascent and descent with electric hydraulic and wire synchronization - Standard inclusion of a screw-type receiving plate for easy height adjustment - Rack and claw type mechanical lock to reliably prevent unexpected descent - Roof sensor detects the ascent limit and automatically stops *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog introduces our link-type drive-on lifts, the "Work Stage X Series." Equipped with swing arms, they can accommodate a wide variety of vehicles, featuring models such as the flat floor type "WSX-F130 Series" and the hydraulic unit built-in "WSX-N130G/N131G Series," among others. Additionally, we offer 4-ton and 5-ton specifications that can meet the lift level requirements of various alignment testers. [Featured Products (Partial)] ■ WSX-F130 Series ■ WSX-N130A Series ■ WSX-N130G/N131G Series ■ WSX-N130/N131 Series ■ WSX-N32 *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog summarizes the "garage jacks" that our company handles. In addition to "garage jacks," we also feature "air-operated garage jacks" and "aero oil jacks." With a full lineup that accommodates a wide range of vehicle types and service scenes, they serve as the mechanic's hands and feet, contributing to a variety of services. Please use this for selecting products. [Featured Products (Partial)] <Garage Jacks> ■M-220M ■M-200DX ■M-300M ■M-500M *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack

We handle the electric hydraulic test lift "Platon Series." The "TL-P101AS-C" features a floating slider design, allowing the slider to be moved with minimal effort, similar to the receiving platform of our large vehicle lift "Caterpillar Twin II." The "TL-PS150AS" is a test lift with a built-in mechanical lock and a capacity of 15 tons, making it easy to handle large vehicles. 【Product Lineup】 ■ Platon 10 (Capacity: 10 tons) ・ TL-P101AS: Standard specification ・ TL-P101AS-C: Floating slider specification ■ Super Platon Big (Capacity: 15 tons) ・ TL-PS150AS: Built-in mechanical lock *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Valy-10A" is a low-profile vertical lift compatible with four-wheeled vehicles, making it very easy to move. Due to its low frame height, it can easily accommodate low-profile vehicles over 4 tons. The operation to release the locking claws is very simple, as you only need to grip the stopper release lever located at the handle, making the task very easy. Additionally, the use of two parallel hydraulic cylinders enhances safety and durability. 【Features】 - 10-ton power significantly improves efficiency for servicing the undercarriage of medium to large vehicles. - Easy to move and set up. - Effortlessly lifts any vehicle type. - Exceptional functionality, widely used from vehicle inspections to quick services. *For more details, please refer to the PDF document or feel free to contact us.

• lift

Our company handles the brake and speedometer combined testing machine, the "Motorcycle Combination Tester." By incorporating inverter control into the motoring device, it allows for precise speed settings. The allowable axle weight is 300 kg. As options, we offer front wheel tire clamping devices, rear wheel tire clamping devices, and infrared remote controls. 【Features】 ■ Allowable axle weight: 300 kg ■ Manual movable guide rollers adopted ■ Safe measurement possible even for vehicles with wide tires ■ Applicable tire width for guide rollers: 100–300 mm *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other measuring instruments

The "Super Multi Tester" is a brake and speedometer combined testing machine that efficiently conducts inspections of full-time 4WD vehicles using a combination tester with two units at the front and rear. Once the vehicle is driven onto the tester, brake and speed inspections can be measured without moving the vehicle. The wheelbase is automatically set, aligning with the wheelbase of the vehicle that has been driven onto it. This system allows for smooth measurement of the speedometer and front and rear brake tests without moving the vehicle, something that could not be achieved with the traditional combination of "combination tester + fixed free rollers." 【Features】 ■ Recommended equipment for quick vehicle inspections ■ Improved visibility with white digital display ■ Achieves "brake inspection" and "speedometer inspection" without moving the vehicle ■ Reduces effort as there is no vehicle movement during rear brake measurement ■ Customizable to install inspection devices (lifts) on either side of the tester *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other measuring instruments

The "Combination Tester" is a brake and speedometer combined testing machine with improved visibility and design. The "500 Series for Large Vehicles" enhances inspector safety through flattening and is available in two sizes: 27 inches and 42 inches. The "180 Series for Small Vehicles" has a generous capacity of 3.6 tons, accommodating RVs and small trucks, and can also be equipped with an optional SS (gas station) specification. 【Features of the 500 Series for Large Vehicles】 ■ Compatible with a wide range of vehicle types, from light vehicles to large automobiles ■ Displays the hold value of braking force, the sum of left and right braking forces, and the sum of maximum braking forces ■ Capable of measuring speedometers by rotating rollers with a motor; motor ring device installation is also possible (optional) ■ Added graphic meters with excellent visibility and design to the lineup *For more details, please refer to the PDF materials or feel free to contact us.

• Measurement and Inspection
• Other measuring instruments

We would like to introduce our vehicle inspection equipment, the "Side Slip Tester." We offer a wide range of models, from light vehicles to large vehicles. Equipped with axle slip measurement functionality for ECO maintenance of large vehicles with two front axles, we also provide a left-right separated model that can be installed on both sides of the inspection pit for large vehicles. 【Product Lineup】 ■WGW-1000BD (Axle weight 10 tons) ■WGT-1000BD (Axle weight 10 tons) ■WG-500CD (Axle weight 10 tons) ■WG-150DD (Axle weight 3 tons) ■WGK-180B (Axle weight 3.6 tons) *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other measuring instruments

The "Triple Tester" is a combined testing machine for side slip, brake, and speed, packaged into one unit with three functions. It has a permissible axle weight of 3.6 tons, making it suitable for inspections of ambulances and some packer trucks. With a body thickness of 240mm, it is easy to install and suitable for multi-story factories. Equipped with an auto-stop function, it automatically stops the roller motor if the maximum sum of the left and right does not update for a certain period, preventing unnecessary wear on locked tires. 【Features】 ■ Permissible axle weight: 3.6 tons ■ Body size: 240mm ■ Two types of selectable rollers (hybrid embossed roller / grooved roller) ■ Improved visibility and design ■ Capable of displaying the "sum," "difference," and "maximum" of brake measurement values *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other measuring instruments

The "Headlight Tester 500 Series" is a product that can also accommodate pulse lighting LED lamps. Through detailed image analysis by the CPU, a Z-shaped mark is displayed on the screen. It also follows and displays light distribution patterns with steep cut line rises. In addition to displaying the measured result values on the screen in the same format as maintenance records, it helps prevent errors in data entry and supports the operator. 【Features】 ■ Support for Z-shaped light distribution patterns ■ Measurement result display function ■ Visual inspection mode function ■ Compatible with new-style LED lamps using proprietary technology ■ Supports installation height of 25 cm *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

The "Headlight Tester 300 Series" is a product that can measure from a fog lamp installation height of 25 cm. It is compatible with LED lamps that cannot be measured with conventional testers for certain vehicle models. Thanks to the C-MOS camera and visual sensitivity correction filter, it can accommodate any color of light. All models come standard with a lamp image finder (screen), and the lamp alignment is made even easier with the cross-line laser function. 【Features】 ■ Compatible with LED pulse control ■ Supports new headlight types (LED) ■ Cross-line laser standard on all models ■ Can accommodate vehicles without lamp alignment marks ■ Compatible with installation heights of 25 cm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"Image Save IMG-BZ" is an image management system that can be used locally (without external connections). By using the camera function of smartphones/tablets, you can manage images linked to vehicle numbers instantly, without the need to name files. By installing optional IP cameras at the front and rear of the vehicle, you can check the vehicle's condition, and it supports both dual and quad screen displays. 【Features】 ■ Scan the QR code on the vehicle inspection certificate to read the vehicle number ■ Capture images using the camera function and manage them by vehicle number ■ The date and time of the capture are clearly displayed ■ Optional IP cameras can be installed at the front and rear of the vehicle for condition monitoring ■ Printing of 6 images per page is possible *For more details, please refer to the PDF document or feel free to contact us.

• Other Software
• Other Management Services

The "Network Series" is an inspection efficiency system developed with the concept of reducing the workload of inspectors. It features a large monitor and uses gentle color schemes that are easy on the eyes. It can display the progress of multiple vehicles on a single screen, allowing for color-coded assessment of work status. It is user-friendly even for those who are not comfortable with computers, and the implementation of this system significantly reduces the burden on inspectors. 【Features】 ■ Strengthening compliance ■ Prevention of human errors ■ Reduction of handwritten tasks ■ Automatic calculation of inspection values ■ Reduction of inspector workload ■ Shortening of vehicle inspection work time *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software