産機 List of Products and Services

The HAS-007 is a plant cultivation system that minimizes auxiliary equipment, making it easy for anyone to use. To make it easy to get started, it comes standard with a rack, circulation pump, and dedicated frequency LED. We provide advice to ensure that even beginners can harvest vegetables and other plants. The solution can be reused repeatedly in the circulation system during a single cultivation cycle. 【Features】 ■ Possible to reduce initial investment ■ Suitable for indoor cultivation ■ Easy and convenient vegetable cultivation ■ Compact and can be installed anywhere ■ Individual control for each tray ■ Custom-made options available *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Table Feeder" is a parts feeder for picking robots that can operate with a variety of components, from resin parts to metal parts (a vibrating device for robot pickup). Thanks to the robot and camera settings, it allows for easy changeover between different types, accommodating small lots of various products. It features an LED backlight as standard, enabling the recognition of complex shapes. We focused on essential functions to reduce costs. 【Features】 ■ Drive system utilizing vibration technology from parts feeders ■ Operable with conventional parts feeder controllers ■ Capable of operating with both resin and metal parts ■ Available in two types, selectable according to the robot *For more details, please refer to the PDF document or feel free to contact us. 【If you would like a demo unit, please contact us with your intended application.】

• others

The "Piezo Series" is a parts feeder for small electronic components. By optimizing the piezoelectric ceramic materials and electrode shapes, it achieves high durability. It reduces costs by minimizing power consumption, making it suitable for transporting thin, lightweight, and small workpieces. Additionally, there is no magnetic interference from the drive unit, making tooling easy. With the adoption of a dedicated controller, it can be used with both 100V and 200V. 【Features】 ■ No adjustment needed during the assembly of the resonant spring and no changes required for 50/60Hz regions ■ Wide range of variable transport speeds through voltage control ■ No magnetic influence on the workpieces ■ Suitable for transporting small and thin items *For more details, please refer to the materials available via the download button. ★ Demo units are available for free rental. For more information, please contact us through the inquiry form.

• others

The "GHC" is a safety window for machine tools designed with a symmetrical structure that can avoid warping due to temperature differences. The surface hardness is equivalent to 9H glass, which helps reduce damage to the window from chips and other debris. Additionally, its high water and oil repellency enhances visibility, making it difficult for oil stains to adhere, and allows for easy cleaning. With its impact resistance, this product can reduce replacement frequency and costs. 【Features】 - Reduces the burden on assembly workers through lightweight design - Lowers after-service costs - Excellent durability and impact resistance - Does not warp in low-temperature environments due to symmetrical design - Superior water and oil repellency, making it difficult for oil stains to adhere *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the safety windows and decorative plates for machine tools that we handle. The safety windows undergo impact testing in accordance with CE standards and have obtained German TUV certification. They also comply with EU regulations and are products with wear and corrosion resistance. Additionally, the decorative plates use transparent materials and are printed using a reverse printing method. From the surface, they exhibit a glossy texture similar to mirror-finish paint, creating a three-dimensional feel and high quality that is difficult to achieve with sheet metal painting. 【Safety Window Features】 ■ Obtained German TUV certification ■ Complies with EU regulations ■ Excellent transparency ■ Prevents condensation ■ The strength of hard-coated polycarbonate is about 200 times that of standard glass of the same thickness (30 times that of acrylic) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Chip Media Separator" handled by Sankik Co., Ltd. Traditionally, sorting after barrel polishing was commonly done using vibration screening or magnetic methods. This product adopts our unique vibration method, allowing for the sorting of small chip media (barrels) in a short time (for workpieces after drying). For workpiece sizes ranging from 1005 to 3216, a different system can be used. Please feel free to contact us when you need assistance. 【Sorting Capacity by Size】 ■ Chip Size: 0603 ■ Quantity: 5g ■ Media Size: 50g 　⇒ Processing Time: Within 20 minutes *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Electromagnetic Controller" handled by Sankik Co., Ltd. The "MFC-S Series" uses a piezoelectric vibration sensor that has been in use for some time, allowing for constant amplitude control. The "MFC-N Series" features phase control, enabling switching between half-wave and full-wave, and is compatible with both 100V and 200V. 【MFC-S Series Features】 ■ Digital setting and display ■ Soft start/stop function ■ Sensor timer function ■ Operating signal output ■ Speed switching *For more details, please refer to the PDF materials or feel free to contact us.

• Power and Energy Equipment

We would like to introduce the "Bulk Hopper" handled by Sanki Co., Ltd. The work transport trough is horizontal, making it difficult for bridging to occur within the hopper due to the workpieces, allowing for stable and precise transport. Additionally, the structure forces the work transport trough to vibrate, enabling the workpieces to be discharged very quietly without generating excessive vibrations. 【Features】 ■ Horizontal work transport trough ■ Difficult for bridging to occur within the hopper ■ Stable and precise transport possible ■ Structure that forces the work transport trough to vibrate ■ Extremely quiet discharge of workpieces *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CS Series" is a best-selling machine widely adopted by various companies, featuring our unique structure. We offer products suitable for thin materials, including the "spring joint method" and "rubber foot method." Similar to the JA-type bowl feeder, the use of horizontally arranged magnets and fiberglass leaf springs allows for consistently stable transportation of various types of workpieces. [Features] ■ Our unique structure ■ A best-selling machine widely adopted by various companies ■ Consistently stable transportation of various types of workpieces is possible *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the bowl feeders 'JA-C Series/CA Series' handled by Sankik Co., Ltd. The perceived noise level is reduced by approximately 20-30% (compared to our company), demonstrating excellent performance in high-speed transport areas. Additionally, the vibration transmission performance to the bowl has further improved. 【Features of JA-C Series】 ■ Bowl Clamp: Enhanced vibration transmission performance to the bowl ■ Leaf Spring: Reduces perceived noise level by approximately 20-30% (compared to our company) ■ Base: Ample reaction force absorption ■ Side Pull Magnet: Adopts the side pull "horizontal pull" method in the C Series as well *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SBV-P Series" is a brake motor that offers excellent brake responsiveness during braking, ensuring precise braking at all times. The lining material is highly wear-resistant and uses a non-asbestos material that can handle a large amount of braking work. It provides reliable and stable braking characteristics even with high-frequency and long-duration use. Additionally, the structure that directly fixes the brake disc to the motor shaft reduces rattling noises and vibrations during rotation. 【Features】 ■ Adoption of non-asbestos lining ■ Excellent responsiveness ■ Quiet operation ■ High frequency and long lifespan ■ Easy maintenance and inspection *For more details, please refer to the PDF document or feel free to contact us.

• others

The "KEB Type 28 Series" is an outdoor brake motor designed to prevent the intrusion of water and dust from the outside. It features Toshiba Premium Gold Motors and meets the Top Runner standards (excluding those below 0.4 kW). Additionally, a manual release device (screw-tightening type) has been standardized for easy installation, maintenance, and inspection. 【Features】 ■ Complies with Top Runner standards ■ Capable of inverter drive ■ Outdoor specification ■ Standardized manual release mechanism ■ Easy installation, maintenance, and inspection *For more details, please refer to the PDF document or feel free to contact us.

• others

The "KEB Type 38 Series" is a brake motor designed for stage equipment, with a single brake operation noise level of 55dB or lower, making it a low-noise specification. By adopting a high-performance brake power unit, it achieves good brake responsiveness and accurate braking even during simultaneous cuts. The brake section is unit-based, allowing for easy disconnection from the motor. We offer a wide range of options from 0.2kW to 37kW. 【Features】 ■ Complies with Top Runner standards ■ Inverter drive compatible ■ Low noise specification (for stage equipment only) *Short-time rating ■ Rich options available ■ Easy maintenance and inspection *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

The "SBD-PH/ESB series" is a brake motor that standardizes a manual release device (bolt type). It allows for constant torque operation with an inverter at a ratio of 1:10 (excluding those below 0.4kW). The brake unit is modular, making it easy to disconnect from the motor. By adopting a high-performance brake power unit, the brake response during simultaneous cutting is excellent, allowing for precise braking. 【Features】 ■ Complies with Top Runner standards ■ Inverter drive capable ■ Easy maintenance and inspection ■ Excellent responsiveness ■ Standardized manual release device *For more details, please refer to the PDF materials or feel free to contact us.

• Parts and Materials

The "SBV-H Series" is a brake motor with a small number of components and easy gap adjustment. It uses Toshiba Premium Gold Motors and meets the Top Runner standards (excluding those under 0.4kW). We also offer an optional "manual release device" with a one-touch unlock feature that prevents forgetting to reset. 【Features】 ■ Complies with Top Runner standards ■ Capable of inverter drive ■ Compact (shortened overall length of the brake section) ■ Easy maintenance and inspection ■ Excellent responsiveness *For more details, please refer to the PDF document or feel free to contact us.

• Parts and Materials

The "AB-H Series" is a brake motor that incorporates Toshiba's premium gold motor. The air-operated system reduces heat generation in the brake section. Furthermore, by using long-lasting linings at the appropriate thickness, reliable and stable braking performance can be achieved even with high-frequency and long-duration use. We offer a wide range of models from 0.1 kW to 22 kW. 【Features】 ■ Compliant with Top Runner standards ■ Inverter drive compatible ■ Compact ■ Ultra-high frequency compatible and long-lasting ■ Installation compatibility with conventional models *For more details, please refer to the PDF materials or feel free to contact us.

• Parts and Materials

A new vibration machine for robot pickup has been added to the lineup! Depending on the material and application of the workpiece, it is possible to adjust the volume of the standard controller MFC-S3B to create a posture that makes it easier for the robot to pick up, such as reversing the disassembly. 【Features】 - Drive system that applies vibration technology from parts feeders - Operable with conventional parts feeder controllers - Capable of disassembly operation for both plastic and metal parts *For more details, please download the catalog or feel free to contact us.

• others

The "industrial machine parts feeder," which can constitute advanced parts supply systems in machining and assembly lines, is active in the automotive, electronics, and other broad fields. Among them, the piezo feeder, driven by fine ceramics piezoelectric elements, is a high-level parts feeder that surpasses electromagnetic types in many aspects, such as fast transport speed, excellent durability, and suitability for transporting small and thin items. 【Contents】 ◆ Bowl feeder ◆ Piezo series ◆ i series ◆ JA series ◆ CA series ◆ Inline feeder, etc. *For more details, please download the catalog or feel free to contact us.

• others

"EST-SH" is a new type of static eliminator using an unprecedented electric field radiation method. Its power consumption is very low at about 1W, resulting in an annual electricity cost of approximately 1000 yen! There is no ozone generation, so there are no unpleasant odors. Being airless, it can be used in sensitive areas related to powder materials and air blowing. There is almost no dust generation from the electrodes, and it is maintenance-free, significantly reducing maintenance costs. Installation is easy, requiring only two small and lightweight electrodes weighing 20g each. It can be used in various scenarios, including static elimination in a vacuum and high-speed transport. [For more details, please download the catalog or feel free to contact us.]

• others

At the same time, by combining the new power supply unit MH-50 (3x over-excitation power supply), the responsiveness of brake motors over 15 kW can be shortened by 1.5 times compared to conventional models (in-house comparison), significantly improving the friction rotation.

• others

This is an innovative parts feeder that adopts a bidirectional straight feeder, enabling sorting and collection with a single feeder. A bowl feeder is used as a supplementary hopper. The driving source employs piezoelectric elements, achieving stable transport across a wide speed range with energy efficiency. (※ The piezoelectric element offers over 70% energy savings compared to conventional electromagnetic types.) 【Features】 ■ Space-saving (※ About half the size of conventional bowl feeder types) ■ Easy to accommodate shared workpieces ■ Easy maintenance

• Parts and Materials

We assist in the selection, alignment, and supply of all types of components. In particular, we have solved the challenges associated with traditionally difficult components such as tiny "springs" and thin "connector housings" using our unique methods.

• others

1. Energy-saving and environmentally friendly parts feeder It achieves more than 70% significant energy savings compared to electromagnetic types. 2. No spring adjustment required Optimal operation can be easily achieved by setting the frequency on the controller. 3. No magnetic or temperature influence on the workpiece Since there are no coils, there is no influence from magnetic fields or temperature rise from the drive unit, preventing troubles. 4. Ideal for transporting small and thin items Direct drive of the spring results in a large effective component of vibration, allowing for the transport of small and thin items without jumping. 5. Compatible with both 100V and 200V It can be used with both 100V and 200V. Additionally, by installing the vibration sensor "KS-3," stable power supply is possible.

• others

This method removes static electricity through electric field radiation, and a major feature is that it does not use air. Additionally, it does not generate ozone and can keep power consumption low. The electricity cost is about 1,000 yen per year, and it is also highly effective for reducing CO2 emissions. Installation is easy, requiring only two small, lightweight electrodes weighing 20 grams each. The ozone smell that was a concern with previous static electricity removal devices is gone! It is also ideal for removing static electricity during the packaging of food and pharmaceuticals! *The image shows the device in use with a parts feeder. The applications are flexible, so please inquire for more information. ≪Features≫ ◆ No ion airflow (no air required) ◆ No ozone generation ◆ Energy-saving (power consumption below 1W) ◆ Easy installation and maintenance-free ◆ Usable in a vacuum ◆ Compatible with high-speed transport ≪Testing with sample units is currently available!!≫ We will provide samples for free. Please give it a try! ◇ For more details, please check 'Request for Information' or 'Download'.

• others

Our products have completely eliminated the use of the six substances regulated by the RoHS directive. For details, please inquire as needed.

• others

【Function】 ● The bowl section acts as a hopper, and sorting is performed on the straight section of the parafeeder. ● Entanglements after alignment are detected by a laser sensor, and deformed workpieces are checked and eliminated by air blow to prevent errors. ● The parafeeder enables bidirectional transport with a single unit, where the outbound path is for supply and the return path is for returning to the bowl, making it a compact feeder. 【Features】 1. Sorting is done in the straight section, resulting in simple tooling. 2. Checking with sensors is easy, allowing for stable supply. 3. Due to the simplicity of tooling, downtime is significantly reduced. 4. The bowl does not require tooling, resulting in a smaller diameter and space-saving compared to conventional designs. (50% smaller compared to our company) 【Example Applications】 Wire diameter: 0.1mm Outer diameter: 2.3mm Free length: 3.5mm Supply capacity: 60 pieces/minute

• others