オグラ List of Products and Services

The "HBB-525" is an electric hydraulic rebar bending machine that can perform both pushing and pulling operations through a change lever switch. It is a base straightening bender with an integrated hydraulic pump and work section, allowing for flexible responses on-site due to its freely rotating tip. Additionally, we also offer the "HBB-180," which can bend D16 rebar at 180° after it has been reinforced. 【Features】 ■ Can perform both pushing and pulling operations through the change lever switch ■ The bending head can rotate 360°, allowing for direction adjustments based on the workpiece situation ■ Comes with a user-friendly standard 5m power cord ■ Optionally includes a bending hook C for correction *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HBB-32HPW" is an electric hydraulic rebar bending machine compatible with SD490 models. It features a "base straightening" bender with an integrated hydraulic pump and work section. The tip can rotate freely, allowing for flexible responses on-site. Please feel free to contact us if you need assistance. 【Features】 ■ Fully compatible with high-strength rebar required by the tip method = SD490 ■ "Base straightening" bender with integrated hydraulic pump and work section ■ Capable of correction processing through "push-pull bending" on-site ■ The tip can rotate freely, enabling flexible responses on-site *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MB-819" is a portable rebar bending machine that allows for various bending processes through a combination of rollers and collars. With the "angle setting dial," you can set basic bending angles. Additionally, we also offer the "MB-225," which features a partition structure that prevents iron powder, which can cause malfunctions, from entering. 【Features】 ■ A separation structure that completely blocks iron powder, ensuring no malfunctions ■ Operates on a 100V power supply ■ Allows for fine angle adjustments when used in conjunction with the "angle fine-tuning knob" ■ Enables various bending processes through a combination of rollers and collars *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MB-L16" is a portable rebar bending machine that features a low-profile design and lightweight construction while providing outstanding stability, significantly improving the workability of rebar processing. It comes standard with rollers and colors of various sizes. Additionally, it adopts an easy-to-use dial for basic bending angle settings, allowing for finer angle adjustments when used in conjunction with a fine-tuning lever. 【Features】 ■ Remarkable weight reduction while maintaining excellent stability ■ Achieves a table height of 183mm and a weight of 24.0kg ■ Equipped with a new type of shock absorber ■ Significantly improves recoil and impact noise during roller return ■ Adopts a "partition structure" that prevents iron filings from entering, which can cause malfunctions *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our electric hydraulic rebar cutting machine, the 'HBC-225/HBC-232'. It is compatible with SD390 and 490 materials that support super high-rise, seismic isolation, and earthquake-resistant designs. In case of trouble, you can return the cutter rod by loosening the return valve about half a turn. Please feel free to contact us when you need assistance. 【Features】 ■ Compatible with high-strength rebar that supports advanced construction methods ■ Comes with a user-friendly standard 5m power cord ■ Equipped with a manual return valve mechanism to return the cutter rod even during troubles ■ Includes a protector to prevent flying debris from cut pieces *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HBC-519" is an electric hydraulic rebar cutting machine designed for professional users. It is compatible with SD390 and 490 materials that support high-rise, seismic isolation, and earthquake-resistant designs. It features a manual return valve mechanism that allows the cutter rod to be returned even in the event of a malfunction. Additionally, we also offer the "HBC-22," which is compatible with D22 rebar. Please feel free to contact us if you need assistance. 【Features】 ■ The return valve can be loosened by half a turn to return the cutter rod. ■ Comes with a user-friendly standard 5m power cord. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HBC-816" is an electric hydraulic rebar cutting machine designed for professional users, compatible with SD390 and 490 materials. In case of trouble, loosening the return valve by half a turn allows the cutter rod to be returned. It comes with a user-friendly standard 5m power cord. Please feel free to contact us if you need assistance. 【Features】 ■ Compatible with SD390 and 490 materials ■ High output and fast cutting due to a powerful motor ■ Durability that meets the needs of professional users ■ Comes with a user-friendly standard 5m power cord *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HBC-316" is an electric hydraulic rebar cutting machine compatible with D16 rebar. It achieves practical cutting capacity and durability while keeping costs down. It also features a manual return valve mechanism that allows the cutter rod to be returned in case of trouble. Additionally, we offer the "HBC-613," a pro model compatible with D13 rebar, equipped with an ergonomic design motor. 【Features】 ■ Achieves practical cutting capacity and durability ■ Uses 100V power supply ■ Comes with a user-friendly standard 5m power cord ■ Equipped with a manual return valve mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HCC-13DF" is a cordless rebar cutter designed for cutting D13 SD345 rebar. It offers approximately twice the cutting speed compared to conventional machines, effectively doubling work efficiency. Additionally, with a fully charged single battery (3.0Ah), it can continuously cut D13 rebar 240 times. We also have the D16 cordless bending machine "HBB-90DS" available. Please feel free to contact us if you need assistance. 【Features】 ■ Approximately twice the cutting speed compared to conventional machines, doubling work efficiency ■ With a fully charged single battery (3.0Ah), it can continuously cut D13 rebar 240 times ■ Equipped with a manual return valve mechanism that allows the cutter rod to be returned in case of trouble *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HCC-16BL" is a D16 cordless rebar cutter that achieves overwhelming high power. With a fully charged 6.0Ah battery, it can continuously cut D16 (SD390) rebar 290 times and D13 (SD345) rebar 420 times. Additionally, we also offer the cordless rebar cutter "HCC-19BL," which can cut D19 rebar (SD390) in approximately 4.5 seconds. 【Features】 ■ Equipped with a new brushless motor that achieves overwhelming high power ■ The motor section uses a "drip-proof and dust-proof" body ■ The motor section is equipped with a highly visible battery level indicator lamp ■ The cutter rod can be returned by loosening the return valve about half a turn *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HCC-13BL" is a D13 cordless rebar cutter that allows for flexible responses on-site, as the motor section can rotate 360 degrees. It is equipped with a DC18V brushless motor that achieves overwhelming high power. Additionally, with a fully charged 6.0Ah battery, it can continuously cut D13 (SD345) rebar 490 times. 【Features】 ■ Can cut D13 (SD345) rebar in 1.6 seconds ■ The motor section uses a "drip-proof and dust-proof" body ■ Equipped with a highly visible battery level indicator lamp on the motor section ■ With a fully charged 6.0Ah battery, it can continuously cut D13 (SD345) rebar 490 times *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HCC-F1640" is a cordless rebar cutter equipped with a new brushless motor designed for a 40Vmax battery specification. While maintaining our company's high durability performance, it achieves high-speed cutting and lightweight design. Additionally, we also offer the conventional model equipped with an 18V battery specification brushless motor, the "HCC-F1618." 【Features】 ■ Cuts D16 (SD390) rebar in 1.7 seconds ■ Equipped with an overwhelmingly powerful brushless motor ■ The motor section uses a "drip-proof and dust-proof" body ■ The battery section is equipped with a highly visible battery level indicator lamp ■ With a fully charged 2.5Ah battery, it can continuously cut D16 (SD390) rebar 250 times *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-N208W" is an electric hydraulic puncher with the capability to drill holes in soft steel Φ20/t8 and stainless steel Φ20/t6. It features a lightweight body that is easy to handle while incorporating a double-action mechanism. Equipped with a new type of stripper, it serves as the standard model at the center of our lineup. Please feel free to consult us when you need assistance. 【Features】 ■ Enhanced durability and operability ■ Model equipped with a new type of stripper ■ Lightweight body for easy handling *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "HSC-25BLN" is a cordless flush cutter equipped with a large, high-torque brushless motor. It features a new original chip saw with excellent cost performance and employs a robust variable triple pin system. Despite lacking a flange, it achieves stable cutting performance and reliable attachment. 【Features】 ■ Significant reduction in running costs with the adoption of a new type of blade ■ Model equipped with a large, high-torque brushless motor ■ Automatic switching to high-speed mode under light loads and high-torque mode under heavy loads *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MPT-650S" is an electric hydraulic multi-purpose tool equipped with a newly installed "proximity switch" for safe and reliable bending processing. Based on a proven electric hydraulic mechanism, various units can be selected and set according to processing needs, allowing for three types of operations: cutting, V-notching, and bending. The main body and various units are designed to be lightweight and compact, making it easy to transport to the work site. 【Features】 ■ Bend angles with the bender ■ Cut angles with the cutter ■ Notch angles with the notcher *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "156WDS/HPC-156W" is a lightweight and compact double-acting puncher designed for drilling holes in Φ15mm stainless steel material with a thickness of 6mm. It employs a double-acting mechanism that operates hydraulically for both "punching" and "lifting." The issue of snagging on materials during the lifting process has been resolved, allowing for stress-free on-site work. 【Features】 ■ Compatible with drilling holes in Φ15mm stainless steel material with a thickness of 6mm ■ Utilizes a double-acting mechanism that operates hydraulically for both "punching" and "lifting" ■ Snagging on materials during lifting has been eliminated, enabling stress-free on-site work ■ The attachment area for the cutting tools (punch and die) has been newly designed and reinforced ■ Processing of general steel, stainless steel, aluminum, and copper can be done with the same cutting tools *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-2213W" is a high-end double-action punch that operates hydraulically for both "punching" and "lifting." We have re-evaluated the product structure from the ground up, newly designed and reinforced the tool (punch and die) mounting section. It is now possible to process general steel materials, stainless steel, channel steel, aluminum, and copper with the same tool. 【Features】 ■ Compatible with hole drilling in H-beams and stainless steel materials up to 9mm thick ■ Adopts a double-action mechanism that operates hydraulically for both "punching" and "lifting" ■ Eliminates snagging on materials during lifting, allowing for stress-free on-site work ■ Newly designed and reinforced tool (punch and die) mounting section ■ Capable of processing general steel materials, stainless steel, channel steel, aluminum, and copper with the same tool ■ A new type of high-end punch that achieves both "performance improvement" and "cost reduction" *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-NF209WBL" is a neck-breaking puncher that employs a new type of brushless motor. It achieves high-power drilling despite being cordless. The head and motor can tilt up to 90°, allowing for flexible drilling in tight spaces. 【Features】 ■ Equipped with a new brushless motor ■ Achieves high-power drilling despite being cordless ■ Head and motor can tilt up to 90° ■ Flexible drilling in tight spaces ■ Capable of processing general steel, stainless steel, channel steel, aluminum, and copper with the same tool ■ Achieves a handy lightweight of 12.4 kg *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-NF188WBL" is a high-power cordless puncher equipped with a new brushless motor. It allows for bending at angles from 0° to 90°. Both "punching" and "lifting" operate hydraulically using a double-acting mechanism, eliminating snagging on materials during lifting, enabling stress-free on-site work. 【Features】 ■ Equipped with a new brushless motor ■ Achieves high-power drilling despite being cordless ■ Allows for bending at angles from 0° to 90° ■ Utilizes a double-acting mechanism for hydraulic operation in both "punching" and "lifting" ■ Eliminates snagging on materials during lifting, allowing for stress-free on-site work *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-N6150W" is an electric hydraulic puncher capable of processing the back of ducts D1 and D2, as well as drilling holes in C-channel steel and channel steel. The included handle can be mounted from three directions. The protrusion at the center of the punch tip has been enlarged to twice its size (compared to our previous model) for better visibility, making alignment easier. 【Features】 ■ The included handle can be mounted from three directions. ■ The blade (punch and die) mounting section has been newly designed and reinforced. ■ The protrusion at the center of the punch tip has been enlarged to twice its size for better visibility and easier alignment. ■ Processing of general steel materials, stainless steel, channel steel, aluminum, and copper can be done with the same blade. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-N186W" is an electric hydraulic puncher with a newly designed and reinforced tool attachment section. It can process general steel materials, stainless steel, channel steel, aluminum, and copper using the same tool. The protrusion at the center of the punch tip has been enlarged to twice its size (compared to our previous model) for better visibility, making alignment easier. 【Features】 - Capable of drilling holes in wide materials with a maximum depth of 60mm - Adopts a double-acting mechanism that operates hydraulically for both "punching" and "lifting" - Eliminates snagging on materials during lifting, allowing for stress-free on-site work - Newly designed and reinforced tool (punch and die) attachment section - Can process general steel materials, stainless steel, channel steel, aluminum, and copper using the same tool - Enlarged protrusion at the center of the punch tip for better visibility and easier alignment *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "N209WDS" is a cordless puncher that can handle soft steel up to 9mm thick. By combining a well-established high-performance lithium-ion battery motor with our unique high-efficiency hydraulic mechanism, it enables continuous drilling of 85 holes with a diameter of Φ20 and a thickness of t9mm. It achieves the freedom of movement without a power cord, expanding the possibilities for usability. 【Features】 ■ Capable of continuous drilling of 85 holes with a diameter of Φ20 and a thickness of t9mm ■ Realizes free portability ■ Well-established high-performance lithium-ion battery motor *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "N208WDS" is a cordless puncher equipped with a new type of stripper model. It enables free portability, liberated from power cords, expanding the possibilities for usability. By combining a well-established high-performance lithium-ion battery motor with our unique high-efficiency hydraulic mechanism, it allows for a continuous drilling count of 195 holes with a diameter of Φ20 and a plate thickness of t6mm. 【Features】 ■ Achieves free portability ■ Well-established high-performance lithium-ion battery motor ■ Allows for a continuous drilling count of 195 holes with a diameter of Φ20 and a plate thickness of t6mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "HPC-N209W" is an electric hydraulic puncher that enables drilling of soft steel Φ20/t9 and stainless steel Φ20/t6. It is equipped with a "1050W powerful motor" that can withstand professional work. Achieving a handy weight of 11.3 kg for easy mobility on site, it has significantly reduced weight. 【Features】 ■ Adopts a double-acting mechanism that operates both "punching" and "lifting" hydraulically. ■ Eliminates snagging on materials during lifting, allowing for stress-free on-site work. ■ The attachment area for the cutting tools (punch and die) has been newly designed and reinforced. ■ Processing of general steel materials, stainless steel, channel steel, aluminum, and copper can be done with the same cutting tools. ■ The protrusion at the center of the punch tip has been enlarged by twice for better visibility and easier alignment. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "N209WMX" is a cordless puncher with a newly designed structure that meets the demands of the job site. The 40Vmax battery features high dust and water resistance with an IP56 rating, designed for use in various environments. The protrusion at the center of the punch tip has been enlarged to twice its size (compared to our previous model) for better visibility and easier alignment. 【Features】 ■ The smart system significantly extends battery life ■ Capable of processing general steel, stainless steel, channel steel, aluminum, and copper with the same blade ■ Equipped with a new type of stripper that makes it easy to confirm the position during drilling ■ Adopts a double-acting mechanism that operates hydraulically for both "punching" and "lifting" ■ Eliminates snagging on materials during lifting, ensuring smooth on-site work *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "NF209WMX" is a cordless puncher that has evolved to be even more powerful and faster for drilling holes in soft steel Φ20/t9. It is equipped with a third-generation stripper that makes it easy to confirm the drilling position and visually inspect from the right side. The head can tilt up to 90°, and the motor can rotate 360°, making it ideal for drilling in tight spaces. 【Features】 ■ The 40Vmax battery has a high dust and water resistance rating of IP56. ■ The smart system significantly extends battery life. ■ It can process general steel materials, stainless steel, channel steel, aluminum, and copper with the same cutting tool. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "N209WMX" is a hybrid cordless puncher that has evolved to be even more powerful and speedy, equipped with a 40V max high-power motor. It features a 40V max battery with high dust and water resistance, designed to be used in various environments, meeting the IP56 standard. Additionally, the battery life has significantly increased (compared to previous models) thanks to the "smart system" that provides optimal power supply and charging. 【Features】 ■ Equipped with a new type of stripper that makes it easy to confirm the position during drilling ■ "Double-action" design eliminates stress during extraction ■ A puncher with a "new structural design" that meets the demands of the job site ■ The cutting tools for the N series allow for versatile drilling with just one type *Please feel free to contact us for more details.

• Work tools

The "MB-L16" is a rebar bender equipped with a new type of shock absorber, significantly improving the rebound and impact noise during roller return, resulting in greatly enhanced durability. It achieves a table height of 183mm. By lowering the height by 126mm compared to our conventional model "MB-816," it has become easier to place rebar on the table, further improving work efficiency. 【Features】 - Achieves a weight of 24.0kg, making it 3.0kg lighter than our conventional model "MB-816." - Uses an easy-to-use dial for basic bending angle settings. - Allows for finer angle adjustments in combination with a fine-tuning lever. - Adopts a "partition structure" that prevents iron filings from entering, which can cause malfunctions. - Comes standard with rollers/colors of various sizes, among other features. *Please feel free to contact us for more details.

• Work tools

The "HSC-41MX" is a cordless chip saw cutter that employs a robust irregular triple pin mechanism with an original chip saw that offers excellent cost performance. Thanks to an appropriate power supply system and a large controller for heat protection, the continuous working time until shutdown has significantly increased. Additionally, the base plate cover is bolted from above, making it easy to replace the blade, and it enhances wear resistance during cutting with its surface treatment. 【Features】 - Capable of cutting rebar spaced at 100mm intervals - Achieves stable cutting performance and reliable attachment (with misattachment prevention feature) - Equipped with a 40V max motor that exceeds AC100V power - Achieves over 30 cuts of D41 high-strength rebar (SD490) per battery (4.0Ah) - Comes standard with two large capacity 4.0Ah batteries (BL4040), among other features *Please feel free to contact us for more details.

• Work tools

The "HCC-16BL" is a D16 cordless rebar cutter that maintains its renowned overwhelming high quality while achieving even higher speed and performance. Despite being cordless, it features a new brushless motor that delivers power comparable to AC100V. It can cut D16 (SD345) rebar in approximately 2.6 seconds. Additionally, with a fully charged 6.0Ah battery, it can continuously cut D16 (SD345) rebar 285 times and D13 (SD345) rebar 420 times. 【Features】 ■ Astonishing cost performance ■ Uses a "water-resistant and dust-proof" body for the motor section ■ Equipped with a highly visible battery level indicator lamp in the motor section ■ Includes a manual return valve mechanism that allows the cutter rod to be returned even in case of trouble *Please feel free to contact us for more details.

• Work tools