TSエンジニアリング List of Products and Services

It is legally required to install emergency generators as fire protection equipment in specific fire protection objects, such as large commercial facilities and hospitals, where a large number of people come and go. Users are obligated to conduct inspections and maintenance to ensure that these generators can operate normally in case of an emergency. Our company handles all legal inspections, maintenance, renovation work, and submissions to various government agencies.

• others

We are installing and updating Lossnay ventilation systems in places with poor ventilation and crowding, such as the backyards of commercial facilities, back offices, hospitals, and company meeting rooms and offices.

• others

Repair and renovation work of refrigeration and freezing equipment installed in food factories and cold storage warehouses. We are also carrying out new refrigerator installation work.

• others

We are addressing issues such as the room temperature not decreasing, lack of airflow, water leakage, musty odors (strange smells), and unusual noises. These problems can arise not only from the deterioration or failure of parts but also from dirt inside the air conditioner, which can cause symptoms like lack of airflow and insufficient cooling. Therefore, we perform cleaning work in conjunction with repair work.

• others

We carry out replacement work for air conditioners that have deteriorated over time and lost efficiency, as well as installation work for new air conditioners when expanding offices or workplaces, and relocation work for air conditioners and remote controls due to changes in room layout. Additionally, we also perform electrical work such as the installation of ventilation systems and LED lighting. After conducting renovation or new installation work, we perform trial operation inspections to confirm that everything is functioning properly and that the units are operating at their intended capacity.

• others

With the revision of labor safety and health regulations, management employers are required to make efforts to prevent passive smoking, and measures such as a complete ban on smoking inside buildings and indoor smoking separation are being requested. Therefore, it is necessary to continuously and regularly confirm the effectiveness of smoking separation. Our company has a wealth of cleaning experience with over 400,000 units in total, and we conduct real-time measurements that can confirm results on-site. We handle all maintenance related to the workplace environment. Please feel free to contact us when needed. 【Measurement Method】 ■ Items: Dust concentration, airflow from non-smoking areas to smoking rooms, carbon monoxide concentration ■ Smoking measures: Measurements taken twice a day (morning and afternoon) before and after construction ■ Ongoing maintenance management: Measurements taken twice a day (morning and afternoon) every three months *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection

Preventive measures against Sick House Syndrome require VOC (volatile organic compounds) measurement. The concentration of VOCs may increase from items and furniture brought in after tenants move in, potentially causing residents to develop Sick House Syndrome. By conducting VOC concentration measurements before handover and retaining the data, it can be proven that the effects are not from the building, ensuring safety for the occupants. Our company can perform not only "Sick House Measurements" but also indoor air quality measurements and odor assessments. If you have any concerns regarding air quality, please feel free to consult us. 【Active Method Features】 ■ Using a pump, air is forcibly passed through a dedicated collection tube at a constant flow rate for a set period to collect the target substance. ■ Sampling time: 30 minutes per location. ■ Two measurements are required per location. ■ Measurement time is shorter compared to the passive method. *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection

The filtration system consists of various equipment including the filter body, filtration pump, hair catcher, heating device, filtration process valve, and dosing device. There are five types of common filter media, including anthracite, manganese zeolite, and filter sand, and our company can accommodate all of them. TS Engineering not only handles the replacement of filter media but also offers regular maintenance services. Please feel free to consult us regarding any filtration equipment. 【Features】 ■ Filter media is purchased directly from major manufacturers, ensuring low cost and high quality ■ Work is carried out by experienced service personnel ■ Disposed filter media is contracted directly with waste disposal companies *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

In facilities subject to the Building Hygiene Management Standards (Building Hygiene Act), regular inspections of drainage pipes, ventilation pipes, and insect screens are mandatory. Our company quickly responds to urgent requests, such as overflowing drains, with just a phone call, providing peace of mind. From a single clogged toilet to the maintenance of an entire building, various production areas in factories, and new construction sites, we offer a consistent service from planning to execution by experienced service personnel. Please feel free to consult us about any equipment. 【Features】 ■ Emergency response capability within 2 hours of the call ■ Tailored construction methods for any facility ■ Capable of comprehensive work on facilities with complex drainage routes *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

The use of plate heat exchangers is increasing in equipment and refrigeration units due to advantages such as high efficiency and compactness. Cleaning work is effective for improving heat exchange failures. Additionally, regular cleaning is necessary to prevent equipment troubles before they occur. Chemical cleaning can be performed at about half the cost compared to disassembly and maintenance. Our company offers chemical cleaning that can be done at low cost and short delivery times, as well as plate disassembly cleaning. 【Features】 ■ Compatible with plate heat exchangers from various manufacturers ■ Selection of suitable cleaning agents and unique cleaning methods to enhance cleaning effectiveness ■ Confirmation of cleaning effectiveness (flow measurement, temperature measurement, endoscopic inspection) ■ Recovery and proper disposal of cleaning waste liquid (manifest issuance) *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

Much of the dirt on water-cooled oil coolers is due to scale components adhering to the circulating water. When scale adheres, it hinders the heat exchange of the oil cooler, causing an increase in oil temperature, which can lead to abnormal shutdowns of hydraulic equipment. To prevent such troubles, we recommend regular cleaning. Have you ever experienced "emergency shutdown due to abnormal oil temperature! Replacement of the oil cooler body takes several weeks"? In many cases, performance can be restored by removing dirt through cleaning without having to replace the body. We are here to help when you need assistance. 【Oil Cooler Cleaning Method】 ■ Oil Cooler 　　　↓ ■ Cooling Water Piping 　　　↓ ■ Cleaning Hose Installation *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

Just as blood tests assess the health status of the human body, conducting "water quality tests" allows us to identify the risk of water-related issues in advance and implement preventive measures. Cooling water is prone to four major issues: "scale formation," "algal growth," "corrosion," and "Legionella bacteria." Open cooling towers, in particular, are susceptible to external environmental influences, necessitating measures that correspond to the operating conditions, installation circumstances, and water quality. Additionally, other types of facility water, such as chilled and hot water or make-up water (groundwater), have their own characteristics, requiring tailored measures based on their specific uses and symptoms. 【Characteristics of Facility Water】 ■ Cooling Water: Cleaning + Water Quality Management ■ Chilled and Hot Water: Cleaning + Corrosion Inhibitor Addition ■ Make-up Water (Groundwater): Water Quality Management + Water Quality Improvement (Water Softener) *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection
• Water quality/pH measuring device

"Foreign substances" refer to things that are different from the norm. They are defined as strange items that cause discomfort, and foreign substance analysis can provide significant clues for identifying the causes of problems and resolving issues. Our company conducts water quality testing for drinking water, hot and cold water, and cooling water in-house. By performing on-site water quality tests alongside foreign substance analysis, we can verify whether foreign substances or problems are derived from water quality. Additionally, we conduct over 500 foreign substance tests annually, allowing us to create a database of past cases, which enables us to make quick and accurate judgments based on that data. [Features] - In-house water quality testing for drinking water, hot and cold water, and cooling water - In addition to analysis, we also perform cleaning of hot and cold water systems, and in cases of foreign substances caused by corrosion, we can propose cleaning or rust prevention agents - Extensive track record: conducting over 500 foreign substance tests annually *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection

"Cooling and Heating Water System Cleaning" is a cleaning method that is gentle on piping, utilizing the dispersing effect of rust inhibitors. Users with older buildings can reduce cleaning risks. By using a rust inhibitor with a high dispersing effect instead of a cleaning agent, the material of the piping is not damaged. Cooling and heating water systems can corrode unnoticed, leading to significant issues such as leaks. By using rust inhibitors for cleaning cooling and heating water pipes, you can suppress corrosion within the piping and ensure long-lasting use of your equipment. [Features] - Uses rust inhibitors instead of cleaning agents: dispersing effect - Significantly reduces cleaning water volume: 70% cut - Short construction period: cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

"Chemical cleaning of air conditioning drain pipes" refers to a cleaning method that uses chemicals and high-pressure water to clean the inside of air conditioning drain pipes, reducing the risk of water leaks through vacuum suction while effectively removing slime and dirt from the pipes. Recently, there has been an increasing demand for chemical cleaning of air conditioning drain pipes as a preventive maintenance measure due to concerns about secondary damage caused by water leaks from air conditioners. By proactively suggesting unseen risks to customers, we provide a higher level of service. 【Features】 ■ Complete removal of slime and dirt through chemical cleaning ■ Enhanced cleaning effect with high-pressure jet and vacuum suction ■ No water leaks due to vacuum suction ■ Inspection of the interior of the pipes before and after cleaning using an endoscope *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

Our company conducts "flow measurement of gases and liquids." We own eight ultrasonic flow meters (distributed across each service center), allowing us to respond to urgent sites and large projects that require multiple units. We can also propose investigations into the causes of water leaks in conjunction with pipe removal, ultrasonic thickness measurement, endoscopic inspections, and X-ray examinations. Please leave the measurement and data processing to our specialized engineers. 【Features】 <Flow Measurement of Gases> - Information on pipe size, material, measuring fluid, and temperature is required. - Dedicated damping materials are used as countermeasures against acoustic noise. <Flow Measurement of Liquids> - Flow velocity and flow rate can be measured from the outside with only the removal of insulation. - Up to eight calibrated flow meters can be used for simultaneous measurements. *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection

Brine is used as a heat transfer medium in low-temperature refrigeration units, chillers, and industrial heat exchangers. Have you ever been troubled by not knowing where to request disposal due to removal work or to check the concentration during maintenance? Our company has over 300 past achievements and can handle everything from the extraction of large plants, building air conditioning, to small cooling equipment, as well as after maintenance after refilling. 【Features】 ■ Brine recovery: during removal work ■ Brine recovery, cleaning, and replacement: during maintenance ■ Filling new liquid into newly installed equipment: during new installation work *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services
• maintenance

We conduct on-site surveys and propose various measurement methods according to the situation. For example, in the case of odors, we implement "odor measurement + detection tube measurement + VOC," and for clean rooms, we conduct "cleanliness measurement + microbial testing + leak measurement." Additionally, water quality analysis and microbial testing are also possible. We make comprehensive judgments through measurements other than air. [Overview] ■ Measurement of volatile organic compounds and air environment ■ Measurement of odor index, concentration, etc. ■ Measurement of corrosive gases and detection tube measurement ■ Cleanliness measurement and microbial testing ■ Work environment measurement *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services
• Measurement and Inspection

"When you open a faucet that hasn't been used much, brown water comes out!" We can solve your concerns, such as "I've been using it for years but have never cleaned the pipes," with our 'water supply pipe cleaning' using ozone water. Ozone water is characterized by its high reactivity to organic matter (dirt). Moreover, after the reaction, it returns to oxygen, leaving no residue and ensuring safety. At TS Engineering, we have over 2,000 successful cases annually and also carry out improvements and repairs to tank facilities. You can also trust us with foreign substance analysis for water supply troubles. 【Construction Flow】 ■ Occurrence of foreign substances and red water ■ Electrolytic method to create high-concentration ozone water and send it to the piping system ■ Disinfection and cleaning of organic matter and odor-causing substances ■ Water sent into the system from the aeration generation device for physical cleaning of organic matter ■ Increased cleaning power through aeration (physical cleaning) *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services

Our company conducts "Noise and Vibration Level Measurements." We can measure the "working environment sounds in factories" aimed at preventing hearing impairments for workers, as well as "noise and vibration measurements of machinery" and "noise and vibration level measurements in factories." Additionally, we conduct investigations such as "cause investigation measurements" and "sound insulation measurements," where we measure the specific frequencies of equipment generating noise and investigate the surrounding impact based on those frequencies. 【Features】 <Measurement of Working Environment Sounds in Factories> ■Measurement Locations: Areas around equipment that generates high noise ■Purpose: Prevention of hearing impairments for workers ■Relevant Legislation: Labor Safety and Health Act (under the jurisdiction of the Ministry of Health, Labour and Welfare) *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services
• Measurement and Inspection
• Vibration and Sound Level Meter

In conventional deterioration surveys, the only method that allowed for estimating remaining life through thickness measurements and understanding corrosion conditions was destructive testing, specifically pipe removal inspection. However, pipe removal inspection has many limitations, such as water shutdowns, drainage regulations, and nighttime work restrictions. Our company offers a high-precision deterioration survey that combines various diagnostic methods to conduct non-destructive testing similar to pipe removal. Please feel free to contact us when needed. 【Features】 ■ By identifying areas of wall thinning through X-ray inspection, pinpoint thickness measurements are possible. ■ Thickness measurements are conducted after assessing the condition of the piping, making it easier to detect pitting corrosion. ■ High-precision survey data can be provided. ■ No restrictions on working hours (nighttime). ■ There are no water shutdowns or drainage regulations, allowing for uninterrupted use of equipment and reducing the risk of leaks. *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection
• Non-destructive testing

Circulating within the building, the plumbing for water supply and drainage can be likened to "blood vessels" in a person. Just as human blood vessels and building plumbing age (deteriorate over time), they can develop various troubles. To continue using the "plumbing," which is also the blood vessels of the building, it is important to conduct regular health check-ups to prevent troubles before they occur. Additionally, maintenance and inspection of the exterior drainage are also important. Our company offers solutions from high-pressure cleaning to resolve blockages in drainage pits and pipes, as well as repair work for cracks. 【Investigation Methods and Points for Selecting Investigation Locations】 ■ Ultrasonic thickness measurement: Calculate remaining lifespan ■ Endoscopic inspection: Check the condition inside the pipes ■ X-ray investigation: Check the condition inside the pipes ■ Pipe removal inspection: Calculate remaining lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection
• Environmental Survey

Our company is capable of HEPA filter replacement, leak measurement, and various measurements in environments such as hospital operating rooms, food processing plants, and pharmaceutical clean rooms. We can provide reasonably priced HEPA filters made in Japan, as well as chemical filters, and we also perform HEPA filter replacement work in addition to measurements. Please feel free to contact us when you need our services. 【Features】 ■ HEPA Filter Replacement: Remove existing HEPA filter and install a new HEPA filter ■ HEPA Filter Leak Measurement: Confirm the performance of the HEPA filter ■ Airflow Measurement: Measure air velocity (airflow) from the device using a rectifier (hopper) ■ PAO Generator: Generate particles in the primary air entering the clean room ■ Inter-room Differential Pressure Measurement: Measure the differential pressure between rooms within the clean room *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Measurement and Inspection

When updating the air conditioning system, removing old refrigerant oil through "refrigerant piping cleaning" allows for the reuse of existing piping. Additionally, this method is effective when refrigerant oil has deteriorated, causing frequent compressor damage, or when moisture and foreign substances have mixed in due to issues. We use a non-Freon type cleaning agent developed in collaboration with a chemical manufacturer, and we perform circulation cleaning with a unique cleaning unit that can accommodate long piping and multiple branch pipes, such as those in multi-system buildings. 【Features】 ■ Cost reduction ■ Shortened construction period ■ Unique cleaning unit and cleaning agent for water treatment ■ Analyzing the oil concentration in the cleaning solution to confirm cleaning effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

• Other Management Services

Around us, there are a variety of bacteria, such as common bacteria that inhabit everywhere, E. coli which is an intestinal bacterium, and Legionella species found in soil, all living in various places. The "Building Sanitation Law" mandates testing for general bacteria and E. coli in drinking water, while the "Public Bathhouse Law" requires testing for bath water, and the "Swimming Pool and School Health Law" mandates testing for Legionella species and E. coli in pool water. Our company can handle everything from water quality testing and bacterial testing to identify causes, pipe cleaning as a countermeasure, and even maintenance such as replacing filter media and filters. Additionally, we can perform bacterial species identification tests. Please feel free to consult us. [Overview] ■ Falling bacteria testing (standard analysis) ■ Airborne bacteria testing (more precise analysis) ■ Adhering bacteria testing (targeted analysis) ■ Bacterial testing in water *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Inspection
• Other Management Services

"REMO III" is a remote monitoring kit that supports various sensors, making it easy to visualize the information you want to know. It is equipped with standalone mobile communication capabilities, so an internet connection is not required. Additionally, it is compatible with both 100V and 200V, allowing for installation in various locations. Please feel free to contact us if you have any inquiries. 【Features】 ■ Detects small changes in the environment ■ Notifies via email ■ Easy to retrofit to existing equipment ■ Missed alert prevention feature *For more details, please download the PDF or contact us.

• Security cameras and surveillance systems

We would like to introduce the implementation results of the remote monitoring kit "REMO III" in zoos and aquariums. For animals (fish) that are sensitive to changes in water temperature and air temperature, maintaining a constant temperature in their habitat is crucial for protecting their lives. For animals (fish) managed in the back yard, if the set temperature or humidity is exceeded, an email notification is sent to the keepers. This contributes to the health management of animals (fish) that are sensitive to changes in water temperature and air temperature. Additionally, we have also made it possible to quickly notify via email in the event of an escape.

• Facility Management System

We would like to introduce the successful implementation of "REMO III," which can detect abnormalities in temperature and humidity, in house cultivation and greenhouses. In an environment where changes in temperature and humidity have a significant impact on crops, we have set it up to notify farmers via email when humidity exceeds a certain percentage or temperature surpasses a certain level. This allows for the prevention of issues such as forgetting to ventilate or crop heat damage due to excessive temperature or humidity! Additionally, by detecting the presence of people or animals at night and notifying via email, we have also contributed to preventing crop damage and theft caused by animals.

• Security cameras and surveillance systems

The remote monitoring kit "REMO III" is compatible with various sensors and can detect temperature anomalies in equipment by being installed on existing facilities. By introducing it into a server room that operates 24 hours a day, it has become possible to detect sudden temperature rises and the stoppage of cooling devices. This helps prevent system downtime due to server overheating and damage to equipment. *For more details about the product, please download the PDF or feel free to contact us.

• Security cameras and surveillance systems

Our remote monitoring kit "REMO III" detects abnormalities in temperature and humidity and notifies equipment maintenance personnel via email. In places where room temperature and humidity are automatically managed, if the air conditioning stops, dairy products and fresh seafood can spoil, leading to the growth of bacteria and viruses that cause food poisoning. Equipping important facilities with a system that can detect abnormalities in temperature and humidity management is essential for quickly identifying issues, minimizing the impact on other manufacturing processes, and preventing the spoilage or damage of products. Additionally, it is also possible to detect abnormalities if a machine that should be stopped malfunctions. *For more details about the product, please download the PDF or feel free to contact us.

• Security cameras and surveillance systems

The remote monitoring kit "REMO III" detects abnormalities in temperature and humidity and notifies the manager via email. As a result, the administrator can detect temperature and humidity anomalies remotely and respond quickly to unusual temperature changes. It can detect abnormalities on-site 24 hours a day, 365 days a year, contributing to labor-saving in businesses. Additionally, it is equipped with a standalone mobile communication function, so an internet environment is not required. 【Benefits of Implementation】 - Early detection of malfunctions - Reduction in the frequency of regular monitoring 【Implementation Achievements】 - House cultivation, greenhouses - Food factories - Cold storage in factories - Zoos, aquariums *Customization using various sensors such as water leak and brightness sensors, in addition to temperature sensors, is possible.

• others

In April 2015, a law regarding the rationalization of the use and proper management of fluorocarbons was enacted, and inspections became mandatory under the Fluorocarbon Emission Control Law. Depending on the type of equipment, regular inspections by a specialized contractor are required every year or every three years (for compressors with an output of 7.5 kW or more). Additionally, all commercial equipment must undergo a simple inspection at least once every three months. The filling and recovery of fluorocarbons can only be performed by specialized contractors registered with the prefectural governor (such as "Refrigerant Fluorocarbon Handling Technicians"). 【Please consult us in the following situations】 ■ I want to request an inspection somewhere. ■ I want to ask for more details. ■ I don't know where to inquire. *For more details, please refer to the PDF document or feel free to contact us.

• Air conditioning equipment
• Ventilation and smoke exhaust equipment
• Refrigeration units, boilers, cooling towers

Our company offers installation and mounting services for school-use Lossnay systems. As the lifestyle with COVID-19 progresses, the adoption of school-use Lossnay systems that can provide fresh air intake and exhaust has surged in various universities. By bringing the outside air closer to the indoor temperature and humidity for intake, it is possible to reduce the load on air conditioning systems. With a compact design, it excels in installation and maintenance. 【Features】 ■ Enables appropriate ventilation ■ Energy-saving ■ Easy installation ■ Total support from proposal to aftercare *For more details, please refer to the PDF materials or feel free to contact us.

• Air conditioning equipment

In case of an emergency. Will the emergency power generation equipment operate? Our company is committed to providing inspections and maintenance of power generation equipment that is safe and reliable, utilizing the specialized knowledge and skills of qualified personnel. If you want to request an inspection, have questions, or are unsure where to inquire, please consult with us first. 【Overview】 ■ Legal inspections of power generation equipment ■ Regular inspections ■ Simulated load testing ■ Installation work, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other Management Services
• Non-destructive testing

At TS Engineering Co., Ltd., we offer "Air Conditioner Cleaning Services" for hotels and ryokan facilities. In recent years, more and more people are choosing accommodation through websites, where reviews are extremely important. Have you seen comments like, "The room smells musty. It seems to be coming from the air conditioner," or "The air conditioning in the guest room was not good"? This could lead to losing valuable customers. Please leave it to us. 【Points of the Cleaning Service】 ■ Creating a comfortable guest room environment ■ Reducing electricity costs ■ Cleaning between checkout and check-in *For more details, please check the related links or feel free to contact us.

• cleaning
• Air conditioning