ワイテックサービス List of Products and Services

Powder, pellets, string-like, strip-like, liquid, slurry, etc. Regardless of the state of the material, we can seal and transport a wide variety of materials within the trough. (Agitation and drying can be done simultaneously) The transport volume is easy to control, and there are no shafts to get tangled. ■ Features ≪Energy Saving≫ - Capable of transporting 1 to 32 meters with a single drive - Energy consumption is one-third that of a conventional screw (according to our research) ≪Space Saving≫ - Transport angles from 0 to 90°, can be installed in narrow spaces - No restrictions on connections between equipment due to cantilever design ≪Cost Saving≫ - Durability is increased by processing special steel for the screw blades (The type of steel used varies depending on the type of material being transported) - One-stop service from design to maintenance reduces costs *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

There is a transport record of 32 meters with a single drive. Residual powder can be significantly reduced by changing the shape of the trough. Since it is completely sealed, there is no spillage or scattering, which reduces the effort required for cleaning and maintenance. It is also possible to transport while adding chemicals and materials and mixing them. 【Features】 - Capable of transporting solids, liquids, viscous materials, and string-like items without tangling. - Can transport at an incline from 0° to 90°. - If a steeper slope is needed, vertical transport is also possible, allowing for flexible installation locations. - There are no bearings at the end of the conveyor, so there are no restrictions on connecting equipment, enabling effective use of space. - Operates at low rotation on a resin liner, so noise during transport is not a concern. - There is no spillage of transported materials, significantly reducing daily maintenance and cleaning efforts, and improving the working environment around the conveyor. - The screw has a cantilever structure, allowing transport of up to 32 meters (record) with a single unit. *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

The non-axis screw conveyor can transport items regardless of their type or shape. Since it is fixed only on the drive side, even if the transported items get caught in the gap between the screw blades and the trough, they will not jam. It is completely sealed, so there is no spillage, and it is also possible to transport while adding and mixing chemicals, materials, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Conveyor

At Witec Service Co., Ltd., we undertake the design and manufacturing of specialized machinery. We can provide a comprehensive response from design to manufacturing to maintenance, tailored to your requirements. Introducing our "Work Inverter" that we have developed. 【Features of the Specialized Machine - Work Inverter】 ■ Consideration for impact prevention, with adjustable supply volume ■ Height can be freely selected and adjusted for front and rear transportation ■ Specification design according to the transport equipment *Please feel free to contact us for more details.

• Conveyor

At Witec Service Co., Ltd., we offer one-stop solutions for equipment modifications and duct work. We provide comprehensive support from design to manufacturing and maintenance for equipment tailored to your needs. ● Modifications of equipment for layout changes, including heavy cargo transportation ● Various construction work related to the manufacturing and relocation of preceding and succeeding equipment, etc. [Examples of what we can handle] ■ Heavy cargo transportation ■ Moving, relocating, and installation ■ Duct relocation ■ Air conditioning and electrical work ■ Oil mist collector manufacturing ■ Conveyor modifications and manufacturing ■ Modifications and manufacturing of ancillary equipment If you consult with us, we will handle everything consistently! Please feel free to reach out to us.

• Conveyor

At Witec Service Co., Ltd., we accept orders for the design and manufacturing of specialized machines. We can provide a comprehensive response from design to manufacturing and maintenance, tailored to your needs. 【Common Requests and Proposals】 Issue 1: We want to automate manual work ⇒ We propose improvements in work efficiency through automation. Issue 2: We want to address the impact during the manufacturing stage ⇒ We propose quality stabilization through process improvement. 【Examples of Production (One Example)】 ■ Work inversion device ■ Film cleaning clamp ■ Automatic rotation and sliding device ■ Conveying device Trial runs are also possible at our test facility. Please feel free to contact us.

• Conveyor

Traditionally, in belt conveyors for sludge transport, it was necessary to create and install expensive enclosures for odor control. However, our "shaftless screw conveyor," which is completely sealed, has no issues with odors or spillage of transported materials! By eliminating spillage of transported materials, we significantly reduce the labor required for daily maintenance and cleaning, and improve the working environment around the conveyor. Furthermore, the absence of a shaft allows for a larger transport capacity, greatly enhancing transport efficiency. 【Features of the Shaftless Screw Conveyor】 - No shaft means no entanglement of transported materials - Capable of steep incline transport - Versatile combinations available - Low noise - Completely sealed - Capable of long-distance transport *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

"The processing of the large amount of chips generated daily is tough..." "The conveyor stops due to chips getting tangled or clogged..." The 'Non-Axis Screw Conveyor' for chip transport solves these common concerns and problems related to chip handling! It can transport at an incline angle of 0° to 90°. There is no worry about clogging due to adhesion since there is no axis. Additionally, there are no bearings at the end of the conveyor, so there are no restrictions on connecting equipment, and it rotates on the resin liner at low speeds, so noise during transport is not an issue. 【Features】 ■ No axis means no tangling of transported materials ■ Capable of steep incline transport ■ Versatile combinations possible ■ Low noise ■ Completely sealed ■ Capable of long-distance transport *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to introduce our "Shaftless Screw Conveyor." Compared to conventional shafted screws used in conveying processes, the absence of a shaft eliminates the risk of entanglement or blockage of the conveyed materials. Our product solves the time and labor involved in transporting and processing cutting debris, vegetable scraps, and fruit scraps generated during peeling operations! The screw has a cantilever structure, allowing a single unit to convey materials up to 32 meters, and since there are no bearings at the conveyor's end, there are no restrictions on connecting equipment. **Features of the Shaftless Screw Conveyor** - No shaft means no entanglement of conveyed materials - Capable of steep incline conveying - Versatile combinations possible - Low noise - Completely sealed - Capable of long-distance conveying - Can accommodate demo tests with incoming materials - Manufactured domestically - Trial testing facility available *For more details, please refer to the PDF document or feel free to contact us.*

• Conveyor

At Witec Service, we carry out our operations daily to respond to various customer requests in a one-stop manner. We solve customer issues with skilled craftsmanship and ideas tailored to the site. We also promptly address inquiries regarding safety measures, operational efficiency, and labor-saving solutions. Please feel free to entrust us with the design and manufacturing of specialized machines. 【Business Activities】 ■ Design and manufacturing of shaftless screw conveyors ■ Machine design and manufacturing ■ Metal fabrication ■ Heavy cargo transportation and installation ■ Electrical work and sequencing ■ Factory maintenance and preservation ■ Trial testing facilities *For more details, please refer to the PDF materials or feel free to contact us.

• Conveyor