三島工具 List of Products and Services

The "Peltech Cool" starts cooling immediately when the switch is turned on, and the cooling surface becomes cold in about 2 seconds, making it an effective heat prevention product. When used in conjunction with work clothing that has a fan, it can release the hot air from the Peltier device, allowing for more effective cooling. Additionally, it cools the large blood vessels under the armpits, circulating the cooled blood throughout the body to achieve a cooling effect. 【Features】 ■ Immediate cooling upon switching on ■ Compatible with full harnesses ■ Enhanced cooling effect when used with fan-equipped work clothing *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

The "Anshin Adjuster" is an earthquake-resistant product that can be installed without driving anchor bolts. It is easy to install, reducing both installation costs and time compared to anchors. Layout changes and fine adjustments are also possible after installation. There is no need to drill holes in the floor, and it does not affect the strength of the floor. Additionally, in the case of shelves, it helps prevent the falling of items. 【Features】 ■ Easy to attach and detach ■ No anchors required ■ Triple seismic isolation structure *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce a case where an anti-vibration adjuster was used for the installation of a medical refrigerator. The installation involved cutting L-shaped brackets, and if the length of the bolts was a concern, they were cut separately. In the drug discovery building, the L-shaped brackets were installed at fixed positions after cutting the bolts, and the installation was completed. The installation details are thoroughly introduced with images in the published catalog. [Installation Overview] ■ Location: 1st Floor, Pharmaceutical Research Building, Drug Discovery Building ■ Content: Installation after cutting L-shaped brackets and bolts *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Gel Anti-Shake V3" is a product that allows for smooth removal due to its difficult-to-dissolve properties and the effects of high-damping rubber. It can be installed between precision instruments and their bases, enabling earthquake countermeasures with this product alone. When relocating, it can be reused 2 to 3 times by washing it with water. In environments where water or oil does not come into contact, it is possible to install the anti-shake adjuster using only the fixture and this product without using special adhesives. 【Features】 ■ Does not use any plasticizers, making it difficult to dissolve ■ When relocating, only the Gel Anti-Shake V3 needs to be replaced ■ Durability of over 20 years, applicable temperature range of -30°C to 80°C *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Anshin S Round Set" is an earthquake mitigation product that can withstand tremors of seismic intensity 7 while using the existing legs of your equipment. The dimensions of the jig are an outer diameter of 90mm and a thickness of 8mm, made of stainless steel (SUS304). There is no need to replace the legs, so you don't have to worry about the hassle of leveling. 【Set Contents】 ■ Anshin S Round Jig ■ Anshin Earth Embankment Alternative Core Material Round Type ■ Gel Anshin V3 60mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce the "Anshin R Square Set" that we handle. With the adhesive power of "Anshin V3" and the specially designed adhesive "Anshin Aiba," which has excellent deformation-following properties, equipment can be securely fixed without drilling holes in the floor. Simply install the equipment and apply the adhesive. There is no need to lift or move the equipment during installation, making it easy to set up. 【Benefits】 ■ Reduced installation burden (easy installation) ■ Strong against horizontal shaking during earthquakes ■ No holes drilled in the floor ■ Reasonably priced *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

The "Anshin L Square Set" is a product that not only addresses earthquake measures but also prevents equipment displacement, leading to improved work efficiency. It can be installed using the Anshin L square jig for leg shapes such as those of Irecta pipes. By attaching a support plate to the L square jig, it can also be used for caster-legged shelves and safety fences. 【Features】 ■ Jig dimensions: Outer dimensions 80mm x 80mm, total length 90mm ■ Material: Stainless steel (SUS304) ■ Compatible gel: Anshin V3 50 square ■ Part number: A80K-L00-80-G06 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Anshin K Corner Type Jig (Corner/Side)" is a product that can be used on everyday objects such as parts shelves and lockers. It can accommodate equipment with no legs and flat bottoms, as well as objects with corner legs. Install the corner type of this product at the four corners of the target object, and use the side type at the connecting parts for installation. 【Specifications】 ■ Jig Dimensions: External dimensions 80mm x 80mm, Total length 50mm ■ Material: Stainless Steel (SUS304) ■ Compatible Gel: Anshin V3 50 square *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Anshin Easy Set (Z-1/Z-2)" is a product that can easily support lightweight equipment and more. It can be easily installed on the side without lifting lightweight equipment, shelves, low-height equipment, or measuring instruments placed on desks. The Z-1 type is suitable for measuring instruments and lightweight equipment, while the Z-2 type is suitable for lightweight shelves and lightweight equipment. 【Specifications (partial)】 ■ Height 70mm, Width 60mm, Total Length 105mm - In a state where the plate and L-shaped bracket are combined ■ Material: Plated (SS400) ■ Compatible Gel: Anshin V3 38Φ *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce the "Anshin Easy Set (A/B/C)" that we handle. Even heavy equipment that you may have given up on for earthquake measures can be equipped with the "Anshin Round Jig Bolt Type" and the easy installation kit's "Plate" and "L-shaped Bracket," allowing for the installation of the "Anshin Adjuster." Additionally, it can be used in conjunction with equipment that has already been installed with anchors, as well as with equipment adjusted using adjustable legs or dumplings. [Set Contents] ■ Easy Installation Kit ■ Anshin Round Jig Bolt Type 90Φ ■ Gel Anshin V3 60Φ *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Anshin Maru Type 90Φ Set (B12/B16)" is an earthquake-resistant adjuster that can be used with existing equipment. Using gel for earthquake countermeasures, it can prevent failures due to its shock absorption performance. The specifications are an outer dimension of 90Φ, a total length of 125mm, and the material is stainless steel (SUS304). 【Specifications (excerpt)】 ■ Tool dimensions: Outer dimension 90Φ, total length 125mm ■ Material: Stainless steel (SUS304) ■ Compatible gel: Anshin V3 60Φ *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We offer the "Pitatto Carpet," which allows for earthquake measures on carpets. It enables earthquake countermeasures on carpet floors where the Anshin Aiba could not be used. A dedicated plate with strong Velcro is installed on the carpet, and the Anshin Adjuster is applied on top of it. 【Specifications】 ■ Fixture dimensions: Outer dimensions 200mm x 200mm, Thickness 3mm ■ Material: Stainless Steel (SUS430) ■ Part number: MGT-200K-3 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We offer flanges not only in stainless steel but also in materials such as SS400, SFVC2A, and S25C. JIS B 2220 includes various types such as plate flanges and hub flanges, which differ based on the connection method with pipes. The plate flange (for water supply) is a water supply flange that complies with JIS standard G 3443-2. Additionally, JPI/ASME includes types such as slip-on and loose types, as well as large-diameter flanges. If you have any questions regarding product specifications or material standards, please feel free to contact us. 【Products We Handle (Partial)】 ■ JIS B 2220 ■ JPI/ASME 150/300 Series A ■ JPI/ASME 400/600/900 Series A ■ JPI/ASME 75/150 Series B ■ JPI/ASME 300/400/600/900 Series B *For more details, please refer to the PDF materials or feel free to contact us.

• Parts and Materials

In this catalog, we introduce a variety of products from Trusco Nakayama Corporation that are compatible with carbon neutrality. We feature various types of products, including air-powered items such as "impact wrenches" and "air dusters," as well as electric-powered products and solutions for heat and cold. The CO2 reduction effects, as reported by the manufacturers, are illustrated in pictorial form. We invite you to take a look. [Contents (excerpt)] ■ Air-powered products ■ Electric-powered products ■ Batteries ■ Heat and cold solutions ■ Lighting and lights *For more details, please refer to the PDF document or feel free to contact us.

• Power and Energy Equipment

This catalog features "Sanitary Fittings" from Consus Co., Ltd. We introduce a wide variety of products, including sanitary pipe "PP," welded 90° elbow "EL-W," and welded tee "TE-W." In addition, we have many other products listed, so please take a moment to read through. [Featured Products (Excerpt)] ■ Sanitary Butterfly Valve ■ Welded Hanger ■ Blind Hanger ■ Sanitary Pipe ■ Welded 90° Elbow ■ Welded 45° Elbow *For more details, please refer to the PDF document or feel free to contact us.

• Fittings

We would like to introduce a case study of "jig production for work improvement" that we conducted. There were concerns such as "I don't want to hold a beaker with one hand from a safety perspective" and "work efficiency is poor because women often perform the tasks." The image shows the jig we created based on these considerations. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■Challenges - I don't want to hold a beaker with one hand from a safety perspective. - Work efficiency is poor because women often perform the tasks. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our stainless steel valve "K Series." These are construction design equipment valves made with stainless steel valves that have excellent corrosion resistance. The "5K Flanged Gate Valve" uses non-asbestos packing for the gland packing and bronze casting for the yoke sleeve. In addition, we also offer "10K Flanged Gate Valves" and "10K Screwed Gate Valves," among others. Please feel free to contact us if you have any requests. 【Lineup (Excerpt)】 ■ 5K Flanged Gate Valve ■ 10K Flanged Gate Valve ■ 10K Screwed Gate Valve ■ 10K Screwed Swing Check Valve ■ 10K Flanged Ball Check Valve *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our stainless steel valve "AJ Series." The "10K/Class 150 Full Jacket Gate Valve" features a stainless steel gland flange and a ductile iron yoke sleeve. The jacket is made of carbon steel. Additionally, we offer the "10K/Class 150 Full Jacket Globe Valve" and the "10K/Class 150 Full Jacket Check Valve," among others. Please feel free to contact us if you have any requests. 【Product Lineup (Excerpt)】 ■ 10K/Class 150 Full Jacket Gate Valve ■ 10K/Class 150 Full Jacket Globe Valve ■ 10K/Class 150 Full Jacket Check Valve ■ 20K/Class 300 Full Jacket Gate Valve ■ 20K/Class 300 Full Jacket Globe Valve *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

We would like to introduce our stainless steel valve 'S Series'. The "Class 150 Gate Valve" features an aluminum nameplate, A193 Gr.8 bonnet nut, and a stainless steel gland nut. The body, bonnet, and disc are made of SCS13A. Additionally, we also offer "Class 150 Globe Valves" and "Class 150 Swing Check Valves." 【Product Lineup (Partial)】 ■ Class 150 Gate Valve ■ Class 150 Globe Valve ■ Class 150 Swing Check Valve ■ Class 300 Gate Valve ■ Class 300 Globe Valve *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our stainless steel valve "B Series." The "10K Globe Valve (UCL)" is a product compliant with the RoHS directive, featuring SCS13A for the body, bonnet, and packing nut, and 304SS for the stem, disc, and gland. The stem is hard chrome plated. In addition, we also offer the "5K Globe Valve," "20K Y-Strainer," and "10K Swing Check Valve," among others. Please feel free to contact us if you have any requests. 【Lineup (excerpt)】 ■10K Globe Valve ■5K Globe Valve ■20K Y-Strainer ■10K Swing Check Valve ■10K Lift Check Valve *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our stainless steel valve "C Series." The "Class 150 Gate Valve" uses SCS14A for the body and bonnet. It features a stem made of 316SS and employs an expanded graphite sheet gasket. In addition, we offer a variety of products such as the "Class 150 Globe Valve" and "Class 300 Gate Valve." Please feel free to contact us if you have any requests. 【Product Lineup (Excerpt)】 ■ Class 150 Gate Valve ■ Class 150 Globe Valve ■ Class 150 Swing Check Valve ■ Class 300 Gate Valve ■ Class 300 Globe Valve *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

We would like to introduce our stainless steel valve "A Series." The "10K/Class 150 Gate Valve" features a ductile iron yoke sleeve and a ductile cast iron yoke handle. The "10K/Class 150 Stainless Steel Bellows Seal Globe Valve" has an aluminum nameplate and uses an expanded graphite gasket on the bonnet side. We have many other products in our lineup, so please feel free to contact us if you have any requests. 【Product Lineup (Excerpt)】 ■ 10K/Class 150 Gate Valve ■ 10K/Class 150 Globe Valve ■ 10K/Class 150 Stainless Steel Bellows Seal Globe Valve ■ 10K/Class 150 Swing Check Valve ■ 10K/Class 150 Lift Check Valve *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Ebara Pump 50Hzz" that we handle. We offer a rich lineup, including a wide range of products such as the inverter-equipped MMFA and AAFA types, the spiral FDP and FSD types, and the circulation LPD and LPD4 types for land pumps. Additionally, we have a diverse selection of submersible pumps and pump control equipment available. We are also offering a handbook, so please feel free to contact us if you have any requests. 【Product Lineup】 ■ Land Pumps: Spiral, Multi-stage Spiral, Circulation, Self-priming, Industrial, Magnetic Drive, Vacuum ■ Submersible Pumps: Clean Water, Sewage and Wastewater Treatment, Water Treatment, Civil Engineering ■ Pump Control Equipment: Control Panel Electrical Components, Accessories *For more details, please refer to the PDF materials or feel free to contact us.

• pump

We would like to introduce our "SPL Type Sanitary Self-Priming Centrifugal Pump." Developed based on the high-performance SE type pump, this product achieves high efficiency and low cost with excellent self-priming capabilities. The motor is standardly designed as a totally enclosed fan-cooled type, and can also be equipped with explosion-proof and pressure-resistant explosion-proof types. Additionally, the shaft seal section is standardly a self-flushing type, and by adopting a combination of ultra-hard material and carbon for the sealing material, it can be used even under harsh conditions. 【Features】 ■ Significantly reduces power consumption with high efficiency (MAX 45%) ■ Structure designed with sanitation in mind, excellent in cleanability ■ Simple structure, excellent in maintenance ■ Pump capacity can be easily changed by altering the impeller diameter ■ Quiet operation during use ■ The exterior is finished in stainless steel, providing excellent aesthetics and durability *For more details, please refer to the PDF document or feel free to contact us.

• pump

We would like to introduce the "SE Type Sanitary Centrifugal Pump" that we handle. The high-grade sanitary pump SE type is born from advanced technology. It has been developed to be applicable to a wide range of specifications, making it an ideal pump with comprehensive features. It has excellent suction performance even at high speeds and high heads, and the suction inlet diameter is one size larger than the discharge outlet diameter, which enhances its cavitation resistance. 【Features】 ■ High performance and compact design ■ Very good pump efficiency, making power costs economical (pump rate: 40-70%) ■ Axial thrust is balanced by a balance hole, allowing for safe long-term operation ■ Adopts a closed impeller, resulting in very quiet operation ■ The exterior is made of stainless steel, offering excellent aesthetics and durability *For more details, please refer to the PDF document or feel free to contact us.

• pump

We would like to introduce the "Diaphragm Valve Model 72" that we handle. It features flow characteristics close to linear. The transparent gauge cover (made of polycarbonate) protects the interior and exterior from corrosive chemicals and gases. Additionally, the gauge cover serves as an indication, making it easy to check the opening degree. Please feel free to contact us if you have any requests. 【Basic Specifications】 ■ Nominal Diameter: 200mm, 250mm (8inch, 10inch) ■ Body Material: U-PVC, PP, PVDF ■ Seal Material / Diaphragm: EPDM, PTEE, FKM, others ■ Connection Standards / Flange Type: JIS 5K, JIS 10K, DIN PN10, ANSI CLASS150 ■ Ultra-Pure Specification: Oil-free *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our "Diaphragm Valve Type 15." By reviewing the material and shape, we have reduced the handle operating force. The gauge cover also serves as an indication, making it easy to check the opening degree. It has a flow characteristic close to linear. Please feel free to contact us if you have any requests. 【Basic Specifications】 ■ Nominal Diameter: 125mm, 150mm (5inch, 6inch) ■ Body Material: U-PVC, PP, PVDF ■ Seal Material/Diaphragm: EPDM, PTEE, FKM, and others ■ Connection Standards/Flange Type: JIS 5K, JIS 10K, DIN PN10, ANSI CLASS150 ■ Ultra-Pure Specification: Oil-free products *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Flexible Diaphragm Valve Type 14" that we handle. With flow characteristics close to linear, it is designed for easy and reliable installation, featuring a newly equipped bottom stand with holes for inserts. This product allows for the removal of the valve body from the line. Please feel free to contact us if you have any requests. 【Basic Specifications (Partial)】 ■ Nominal Diameter: 15mm-50mm (1/2inch-2inch) ■ Body Material: U-PVC, C-PVC, PP, PVDF ■ Seal Materials - Diaphragm: EPDM, PTEE, FKM, and others - O-ring: EPDM, FKM, and others *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Diaphragm Valve Type 14" that we handle. It features a new rubber with high reliability for leak prevention, used in the diaphragm and cushion. The diaphragm can be replaced with a one-touch bayonet structure. It is equipped with a bottom stand that allows for easy and secure installation. Additionally, the air-operated version adopts the "NAMUR" standard for the air piping section and comes with an adjustable stopper at the fully closed position. 【Basic Specifications】 ■ Nominal Diameter: 15mm-100mm (1/2inch-4inch) ■ Body Material: U-PVC, C-PVC, PP, PVDF ■ Seal Material/Diaphragm: EPDM, PTEE, FKM, and others ■ Connection Standard/Flange Type: JIS 10K, DIN PN10, ANSI CLASS150 ■ Options: Handle lock included for 15mm-50mm (1/2inch-2inch) ■ Ultra-pure Specification: Oil-free products *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "spot air conditioners and factory fans" that we handle. We offer a "single outlet type" with high cooling efficiency (COP) and a compact design, as well as a "handy type." Additionally, we have a "stand type" that serves as a circulator, which is highly effective regardless of the season. 【Product Lineup (Partial)】 ■ Single outlet type ■ Double and triple outlet types ■ Handy type ■ Portable type ■ Ceiling type (hanging type) *For more details, please refer to the PDF materials or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment
• Air conditioning

We would like to introduce the "Hot Air Machine / Hot Dryer" that we handle. Equipped with features such as a simple pro control function, inverter, and automatic operation, we offer the "J Series," which comes standard with external device connection terminals. Additionally, we also handle the "F Series," which is an electric heater type with digital display temperature control for producing clean hot air. 【Product Lineup (Partial)】 ■J Series - SHD-5J - SHD-7.5J - SHD-10J - SHD-15J *For more details, please refer to the PDF materials or feel free to contact us.

• Heating and cooling equipment and facilities
• Air conditioning equipment

The "Heat Spot" is a stand-type product suitable for factories, warehouses, and offices. The single type allows for easy one-touch switching of the heater's orientation between vertical and horizontal, without the need for screws or locks, making manual adjustments simple. The twin and triple types can open up to a maximum of 45° on the outside, allowing you to adjust the heating range according to the usage scenario. 【Features】 ■ One-touch switching ■ Operation lamp ■ Angle adjustment ■ Movable with casters ■ Safety device *For more details, please refer to the PDF document or feel free to contact us.

• Heating and cooling equipment and facilities

We would like to introduce the "dust collectors" that we handle. Starting with the cassette filter type "compact dust collector," we also offer the manual shake type "CS series" and the pulse jet type "L-BP series." Additionally, we have a lineup of "portable dust collectors" that utilize an efficient cyclone system. 【Lineup】 ■ Compact Dust Collector ■ CS Series ■ Dust Cyclone for SDC-CS ■ L-BP Series ■ Portable Dust Collector *For more details, please refer to the PDF document or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

"Sukusuku Fan" is a ventilation and exhaust fan that employs a fully enclosed motor with a focus on durability and safety. It can be installed as a ceiling-mounted type using beams and other structures within the building. It is highly effective in various settings such as facilities, greenhouses, warehouses, and classrooms. It is suitable for high-temperature measures in summer and for improving heating efficiency in winter. 【Lineup】 ■SHC-35C-1 (100V) ■SHC-35C-3 (3-phase 200V) *For more details, please refer to the PDF materials or feel free to contact us.

• Air conditioning equipment
• Ventilation and smoke exhaust equipment

The "Explosion-proof Axial Fan" is a pressure-resistant explosion-proof ventilation and exhaust fan that excels in storage, design, and operability. It is a pressure-resistant explosion-proof type that can be used with peace of mind, available in two types: 100V and single-phase 200V. The compatible duct size is φ320, and the blade diameter is φ272. It comes with a 10m chloroprene cab tire cable (with ground terminal). 【Lineup】 ■SJF-300D1-1M/-2M *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "Jet Sweeper" is a stainless steel exhaust and intake fan that is resistant to moisture and corrosion. It is available in three types: 100V, single-phase 200V, and three-phase 200V. The compatible duct size is φ320, and the blade diameter is φ288. The motor surface is finished with anti-corrosion paint. 【Product Lineup】 ■SJF-300CP-1 ■SJF-300CP-2 ■SJF-300CP-3 *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "KODEKA Fan 400/500 Class" is a large-type exhaust and intake fan. It is compatible with ducts of φ420 or φ520 and operates on a three-phase 200V power supply. Its simple structure makes it convenient for transportation at work sites. We offer two models in our lineup: the "SJF-408" and the "SJF-T506-3," which is equipped with a high-efficiency motor. 【Lineup】 ■ SJF-408 ■ SJF-T506-3 *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "KODEKA Fan Low Noise Type" is a blower and exhaust fan with adjustable wind direction of 180 degrees. It features convenient four-wheel casters with brakes for easy mobility. It is ideal for blowing, circulating, and ventilating in factories, warehouses, event venues, gyms, and more. As an option, we also offer an intake side protective net that is effective in preventing accidents involving fingers, ties, curtains, and other items. 【Features】 ■ Easily adjustable wind pitch angle with a lever ■ Provides excellent effectiveness for blowing, circulating, and ventilating, making it great for heat countermeasures ■ Convenient four-wheel casters (with brakes) for mobility ■ Ideal for blowing, circulating, and ventilating in factories, warehouses, event venues, gyms, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "RS Series" is a reasonably priced, safe, and sturdy high-performance blower. It features a built-in motor protection device (automatic reset thermal protector) that protects the motor from overload and abnormal current. The robust metal body (casing) adopts a side curl structure that significantly enhances strength. 【Features】 ■ Safety mechanism ■ Sturdy body (casing) *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "L Series" is a ventilation fan that pursues low noise and energy efficiency. It features a significantly reduced noise level, energy savings, and improved airflow straightness, with a design that minimizes losses. Equipped with a unique impeller shape that suppresses wind shear noise generated by rotation. 【Features】 ■ Blades (Adopting a quiet impeller) *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "Dodeka Fan 700 Class" is a blower suitable for ventilation, circulation, and air supply in large factories, tunnels, gymnasiums, and more. The wind direction can be adjusted 90 degrees in the pitch angle direction. It features convenient 4-wheel casters (with brakes) for easy mobility. The wind reach distance is 70m (when using 3-phase 200V at 60Hz). 【Specifications (partial)】 ■ Classification: 700 Class ■ Model Number: SJF-700A-3 ■ Power Supply: 3-phase 200V ■ Blade ・Outer Diameter: φ710 ・Number of Blades: 6 *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "Dodeka Fan 600 Class" is a supply and exhaust fan that can be adjusted 90 degrees in the direction of wind direction and elevation angle. It features convenient four-wheel casters for mobility, with brakes included. The wind reach distance is 65 meters (when using 3-phase 200V at 60Hz). It is suitable for ventilation, circulation, and air supply in large factories, tunnels, and gymnasiums. 【Specifications (partial)】 ■ Classification: 600 Class ■ Model Number: SJF-600A-3 ■ Power Supply: 3-phase 200V ■ Blade ・Outer Diameter: φ600 ・Number of Blades: 9 *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "Super Large Fan Low Noise Type" is an energy-efficient, low-noise model of a ventilation and exhaust fan equipped with a high-efficiency IE3 motor. By changing the shape of the blades and casing, significant noise reduction has been achieved. Additionally, by controlling the wind vortex, resistance and resonance noise are minimized. In the "SJF-T604A," noise levels have been reduced by up to 8dB compared to conventional models, and energy savings of approximately 17.5% have been realized. 【Features】 ■ The direction of the airflow can be adjusted vertically by 180 degrees. ■ Convenient 4-wheel casters for easy mobility (with brakes). *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

The "LA Series" is a multi-angle fan ventilation system that achieves low noise levels. It can be installed as a ceiling-mounted type using beams and other structures within the factory. Additionally, it can be used for air blowing and circulation in a space-saving manner. We offer three types of products, including the "SJF-200LA-1." 【Features】 ■ Blade diameter: φ200, φ288 ■ Angle adjustment is possible both for floor-mounted and ceiling-mounted use. *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and smoke exhaust equipment
• Air conditioning equipment

We would like to introduce our "vacuum cleaners" that can handle both dry and wet cleaning. We offer a range of models, starting with the lightweight and compact "SAV-110R," as well as the "SAV-101PRO," which can be stacked for space-saving storage and features a sensor-based full water detection. Additionally, we have a wide lineup including the "SPSV-1102" with a durable stainless steel body that is resistant to impact and tipping, and the manual "Walking Yuso" that requires no power. 【Partial Lineup】 ■Wet and Dry Type ・SAV-110R ・SAV-101PRO ・SPV-101EPC ・SPSV-1102 (10L tank) ・SPSV-110L (22L tank) *For more details, please refer to the PDF document or feel free to contact us.

• Building Cleaning Equipment