リープループ List of Products and Services

Rakustalone 1. EPDM (Ethylene Propylene Diene Monomer Rubber) - Full surface 2. Aluminum Expanded Metal 3. Butyl Adhesive (Full surface) Three-layer structure of 1, 2, and 3, with the adhesive surface protected by a release film (Please remove the release film when in use) 【Features】 - 20% elongation in the longitudinal direction and 20% in the width direction - Maintains shape, can deform, and easily conforms to the substrate - Strong adhesive power and durability, compatible with a wide range of materials *Please check compatibility with butyl adhesive. - Can be easily cut with scissors 【Adhesive-Compatible Materials】 Metal, concrete, polycarbonate, plastic, rubber, glass, fabric, wood, etc. 【Non-Adhesive-Compatible Materials】 Silicone, polyethylene, nylon, and areas treated with special coatings such as fluoropolymer 【Colors】 Available in two colors: B (Black), G (Gray) *Please note that accessories are sold separately.

• Reinforcement and repair materials

●Features This is a copper drain that is environmentally friendly. The connection between the plate and the tube (drainage outlet) is R-shaped, providing excellent drainage efficiency. The plate has rounded corners, preventing damage to the waterproof layer. A wide variety of sizes (for 40 to 110) is available. The thickness of the Easy Drain (copper) is approximately 0.8mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features Uses weather-resistant and corrosion-resistant stainless steel SUS304. The cap has a mirror finish, and the plate has a hairline finish. Compatible with various methods such as ventilation, cushioning, and adhesion. Includes anchor plugs (4 pieces) per unit. There are a total of 11 types available, with a wide selection as needed. The thickness of the easy vent tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses weather-resistant and corrosion-resistant stainless steel SUS304. The surface of the main body is processed with a hairline finish, which significantly improves adhesion to waterproof materials. By installing the anchor plug below the main body and lifting it by 2mm, it can also enhance ventilation. The waterproof layer can be compressed to about 15mm. The washer and cap can securely fix the end of the waterproof layer. Easy venting tube cloth (square) and (round) By inserting easy venting tube cloth during various waterproofing works such as coating waterproofing, stretchability and durability are improved. It accommodates various construction methods such as ventilation, cushioning, adhesion, and insulation. Each unit comes with 4 anchor plugs and 4 all anchors. The thickness of the easy venting tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Most vacuum tubes available on the general market are about 200mm in height, which raises concerns about insufficient height leading to overflow and leakage. With a degassing plate, moisture tends to accumulate, which can cause the waterproof layer and parts of the building to deteriorate more easily. The solution to these problems is the "Raku Degassing Tube," which is just a bit longer. This Raku Degassing Tube, designed by waterproofing craftsmen and architects, has a height of approximately 300mm. It is made of stainless steel SUS304, which is resistant to weather and corrosion. It is compatible with various construction methods, including ventilation, cushioning, adhesion, and thermal insulation waterproofing methods. The double layer comes with anchor plugs and all anchors (4 of each). The thickness is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Most vacuum tubes available on the general market are about 200mm in height, which raises concerns about insufficient height leading to overflow and water leakage. With a degassing plate, moisture tends to accumulate, which can cause deterioration of the waterproof layer and parts of the building. The solution to these issues is the "Raku Degassing Tube," which is just a bit longer. This Raku Degassing Tube, designed by a collaboration between waterproofing craftsmen and architects, has a height of approximately 300mm. It is made of stainless steel SUS304, which has weather resistance and corrosion resistance. It accommodates various construction methods such as ventilation, cushioning, and adhesion techniques. Each unit comes with four anchor plugs. The thickness is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features - The sheet has thickness and is excellent in durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection area between the sheet and the tube (drain outlet) is R-shaped, which enhances drainage efficiency. - The easy drain (rubber) hose attachment allows for a secure connection between the drain and the hose (PVC) using unique technology. - The horizontal type allows for extension of the hose length, up to a maximum of 20m. (Requires 2 days for production) Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet is thick and has excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection area between the sheet and the tube (drain outlet) is R-shaped, which enhances drainage efficiency. - The easy drain (rubber) hose attachment allows for a secure connection between the drain and the hose (PVC) using unique technology. - The horizontal type allows for an extension of the hose length, up to a maximum of 20 meters. (Requires 2 days for production) Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and is excellent in durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drain outlet) is R-shaped, which enhances drainage efficiency. - The easy drain (rubber) hose connection with the drain and hose (PVC) has been securely fixed using unique technology. - The horizontal type allows for extension of the hose length, up to a maximum of 20 meters. (Requires 2 days for production) Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drain outlet) is R-shaped, which enhances drainage efficiency. - The included Easy Drain (rubber) hose has a unique technology that securely fixes the connection between the drain and the hose (PVC). - The horizontal type allows for extension of the hose length, up to a maximum of 20m. (Requires 2 days for production) Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet is thick and has excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection area between the sheet and the tube (drain outlet) is R-shaped, which enhances drainage efficiency. - The easy drain (rubber) hose attachment allows for a secure connection between the drain and the hose (PVC) using unique technology. - The horizontal type allows for hose length extension, with a maximum length of up to 20m (requires 2 days for production). Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drainage outlet) is R-shaped, which offers excellent drainage efficiency. Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drainage outlet) is R-shaped, which enhances drainage efficiency. Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drainage outlet) is R-shaped, which enhances drainage efficiency. Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drainage outlet) is R-shaped, which enhances drainage efficiency. Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features - The sheet has thickness and excellent durability and weather resistance. - The surface of the sheet is embossed, providing excellent adhesion compatibility with rubber sheets, resulting in strong bonding. - The connection part between the sheet and the tube (drainage outlet) is R-shaped, which enhances drainage efficiency. Main material: Vulcanized rubber primarily composed of EPDM Hose material: PVC

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features This is a copper drain that is environmentally friendly. The connection between the plate and the tube (drainage outlet) is R-shaped, providing excellent drainage efficiency. The plate has rounded corners, which prevents damage to the waterproof layer. A wide variety of sizes (for 40 to 110) is available. The thickness of the Easy Drain (copper) is approximately 0.8mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features This is a copper drain that is environmentally friendly. The connection between the plate and the tube (drainage outlet) is R-shaped, providing excellent drainage efficiency. The plate has rounded corners, preventing damage to the waterproof layer. A wide variety of sizes (for 35 to 100) is available. The thickness of the Easy Drain (copper) is approximately 0.8mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of flexible soft PVC, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, which improves adhesion with hoses. The folded bending part is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. We can cut the hose length to meet customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, improving adhesion with hoses. The folded bending part is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of flexible soft PVC, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, which improves adhesion with hoses. The folded bending part of the board is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending section is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) is available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of flexible soft PVC, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, which improves adhesion with hoses. The folded bending section is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. We can cut the hose length to meet customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of flexible soft PVC, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, which improves adhesion with hoses. The folded bending part of the board is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending section is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) is available. We can cut the hose length to meet customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending part of the board is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending part is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut and shipped according to customer requests. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending part of the plate is R-shaped, fitting well with the substrate. There is a wide variety of sizes available (for 40 to 150). We can cut the hose length to meet customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, improving adhesion with hoses. The folded bending section is R-shaped, fitting well to the substrate. A wide variety of sizes (for 40 to 150) are available. We can cut the hose length to meet customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The material is made of soft PVC, which provides flexibility, making it easy to adapt to existing drains and excellent in terms of workability. The tube length is 65mm, enhancing adhesion with hoses. The folded bending part of the board is R-shaped, fitting well with the substrate. A wide variety of sizes (for 40 to 150) are available. The hose length can be cut to order based on customer requests before shipping. The thickness of the Easy Drain (PVC) is approximately 2.0mm.

• Waterproofing work
• Waterproof tape, adhesive, drain, protective panel
• Subsidiary materials

●Features The three-dimensional shape makes it difficult for foreign objects to get stuck, and it can be adjusted to fit the site shape, allowing for the adjustment of the strainer's movable angle (75° to 110°) and the fixed position of the spring, minimizing gaps. All parts are made of weather-resistant and corrosion-resistant stainless steel SUS304. The tip of the spring is coated with PVC, providing a secure lock.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked coating offers excellent weather resistance and corrosion resistance. It can be freely adjusted to fit the installed drain angle (45° to 135°). The lattice surface has a textured design that prevents water flow from being obstructed even if foreign substances adhere, and the uniquely designed wave-shaped bottom ensures excellent drainage. The leaf spring is made of weather-resistant and corrosion-resistant stainless steel SUS304. The tip of the spring is coated with polyvinyl chloride, providing a secure lock. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked coating offers excellent weather resistance and corrosion resistance. It can be freely adjusted to fit the installed drain angle (45° to 135°). The lattice surface has irregularities, which helps prevent water flow from being obstructed even if foreign substances adhere, and the uniquely designed wavy bottom provides excellent drainage. The leaf spring is made of stainless steel SUS304, which is resistant to weather and corrosion. The tip of the spring is coated with polyvinyl chloride, ensuring a secure lock. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for the paint base preparation and forming a skin, corrosion resistance and adhesion are improved. The acrylic baked paint offers excellent weather resistance and corrosion resistance. It can be freely adjusted to fit the installed drain angle (45° to 135°). The lattice surface has unevenness, making it difficult for foreign substances to adhere and allowing water flow to remain unobstructed, with outstanding drainage due to the uniquely designed wave-shaped bottom. The reinforced plate spring is made of stainless steel SUS304, which is resistant to weather and corrosion. The tip of the spring is coated with polyvinyl chloride, ensuring a secure lock. Colors are available in four options: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Space-saving design suitable for balconies and other areas. All parts are made of weather-resistant and corrosion-resistant stainless steel SUS304. The spring tip is coated with vinyl chloride, providing a secure lock.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked coating provides excellent weather resistance and corrosion resistance. The uniquely designed wave-shaped bottom ensures outstanding drainage. The leaf spring is made of stainless steel SUS304, which is resistant to weather and corrosion. The tip of the spring is coated with vinyl chloride, providing a secure lock. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. Excellent weather resistance and corrosion resistance with acrylic baked paint. The uniquely designed wavy bottom provides excellent drainage. The leaf spring is made of stainless steel SUS304, which is resistant to weather and corrosion. The tip of the spring is coated with polyvinyl chloride, ensuring a secure lock. Available in four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for the surface preparation of painting and forming a skin, corrosion resistance and adhesion are improved. Excellent weather resistance and corrosion resistance with acrylic baked paint. Outstanding drainage due to the uniquely designed wave-shaped bottom. The leaf spring is made of stainless steel SUS304, which is weather-resistant and corrosion-resistant. The tip of the spring is coated with polyvinyl chloride, providing a strong lock. Colors available are Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for the paint base preparation and forming a skin, corrosion resistance and adhesion are improved. The acrylic baked coating provides excellent weather resistance and corrosion resistance. The uniquely designed wave-shaped bottom ensures excellent drainage. The reinforced plate spring is made of stainless steel SUS304, which is weather-resistant and corrosion-resistant. The tip of the spring is coated with polyvinyl chloride, providing a secure lock. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses weather-resistant and corrosion-resistant stainless steel SUS304. The surface of the main body is processed with a hairline finish, which greatly enhances the adhesion to waterproof materials. By installing the anchor plug below the main body and lifting it by 2mm, it can also improve ventilation. The waterproof layer can be compressed to about 15mm. The washer and cap can securely fix the end of the waterproof layer. Easy Ventilation Tube Cross (Square) / (Round) By inserting the easy ventilation tube cross during various waterproofing works such as coating waterproofing, the stretchability and durability are improved. It accommodates various construction methods such as ventilation, cushioning, adhesion, and insulation. Each unit comes with 4 anchor plugs and 4 all anchors. The thickness of the easy ventilation tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses stainless steel SUS304, which is weather-resistant and corrosion-resistant. The surface of the main body is processed with a hairline finish, which greatly enhances the adhesion to waterproof materials. By installing the anchor plug below the main body and lifting it by 2mm, it is also possible to improve ventilation. The waterproof layer can be compressed to about 15mm. The washer and cap can securely fix the end of the waterproof layer. The angle of the washer's wing is 45°, designed to prevent lifting even when sealing or other treatments are applied to the end of the waterproof layer. Easy-to-remove vent tube cross (square) and (round) By inserting the easy-to-remove vent tube cross during various waterproofing works such as paint film waterproofing, stretchability and durability are improved. It accommodates various methods such as ventilation, cushioning, and adhesion techniques. Each unit comes with 4 anchor plugs. There are a total of 11 types available, with a rich selection according to needs. The thickness of the easy-to-remove vent tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features - The main body is made of rigid PVC, which has high adhesion to PVC sheets, designed to smooth out the unevenness of the base and facilitate installation. - Tapered hole processing to ensure the sheet is applied flat, preventing the anchor from protruding. - Increased work efficiency as the overlay sheet can be applied without removing the cap. - The cap is made of weather-resistant and corrosion-resistant stainless steel SUS304 (mirror finish) with ventilation-promoting hole processing. *Includes installation screws (3 pieces) and a template (1 piece) for easily cutting the overlay sheet.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses stainless steel SUS304 with weather resistance and corrosion resistance. The cap has a mirror finish, and the plate has a hairline finish. Designed for greening methods. Includes anchor plugs (4 pieces) per unit. There are a total of 11 types available, with a wide variety to choose from as needed. The thickness of the easy vent tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses weather-resistant and corrosion-resistant stainless steel SUS304. The cap has a mirror finish, and the plate has a hairline finish. Available in single and double layers compatible with insulation and waterproofing methods. The double layer comes with anchor plugs and all anchors (4 of each) included. There are a total of 11 types available, with a wide variety depending on your needs. The thickness of the easy-degassing tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel

●Features Uses weather-resistant and corrosion-resistant stainless steel SUS304. The cap has a mirror finish, and the plate has a hairline finish. Available in single and double layers compatible with insulation waterproofing methods. Includes anchor plugs (4 pieces) per unit. There are a total of 11 types available, with a wide variety to choose from as needed. The thickness of the easy vent tube (stainless steel) is approximately 0.8mm.

• Waterproofing work
• Subsidiary materials
• Waterproof tape, adhesive, drain, protective panel