西部商工 List of Products and Services

"Seibu Maintenance Service" is a service where experienced industrial machinery engineers conduct inspections, parts replacements, and maintenance on various types of machinery and equipment on behalf of your company. They are well-versed in parts that are prone to failures and abnormalities that are often overlooked, allowing them to provide accurate advice. Plans can be tailored by combining necessary inspection points to create an appropriate maintenance plan. Equipment maintenance applications have also been added to the lineup, enhancing effectiveness when combined with maintenance services. 【Features】 ■ Engineers with extensive experience can handle anything related to equipment ■ Maintenance items are organized into a menu to accommodate a wide range of customer needs ■ Engineers familiar with equipment maintenance support the introduction of IoT ■ Custom system development tailored to customer needs is also available *For more details, please refer to the PDF materials or feel free to contact us.

• maintenance

We would like to introduce our custom knurled pins. The standard hardness is HRc 61±1, and you can choose from various materials and coatings. Knurling can be performed on flat surfaces or inner diameters, and we can accommodate conical shapes, R, and reverse R shapes according to your requirements. 【Features】 ■ Can accommodate conical shapes, R, and reverse R shapes as per your request ■ Standard hardness is HRc 61±1 ■ Various materials and coatings available for selection ■ Can perform knurling on flat surfaces or inner diameters ■ Fine grinding blades *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the roll-formed knurling tools that we handle. The hardness is HRc 61±1, and the standard material is HSS (without coating), with various materials and coatings available for selection, including options for chamfering. These tools comply with DIN403 for knurling processing in accordance with DIN82, and we can accommodate other pitches upon request. 【Features】 ■ Tools compliant with DIN403 for knurling processing in accordance with DIN82 ■ Standard hardness is HRc 61±1 ■ Standard material is HSS (without coating) ■ Options for chamfering available ■ Other pitches can be accommodated upon request *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our cutting-type knurling tools. These tools comply with DIN 403 for knurling processing according to DIN 82, with a hardness of HRc 61±1 and a standard material of HSS (uncoated). You can choose from options with or without chamfering, various materials, and coatings, and we can accommodate other pitches upon request. 【Features】 ■ Standard hardness is HRc 61±1 ■ Standard material is HSS (uncoated) ■ Options for with or without chamfering ■ Can accommodate other pitches upon request ■ Surface cutting or drilling processing *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our cutting knurling double type 'MF 21 VDI'. It features a shaft with HSS + TIN coating and a swing head for knurling adjustment. The adjustment method for the knurling is easy to match to the workpiece diameter, making it highly recommended for knurling type RGE. 【Features】 ■ Highly recommended for knurling type RGE ■ Easy adjustment method for matching workpiece diameter ■ Swing head for knurling adjustment ■ Shaft with HSS + TIN coating *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 42.12" is a double-type cutting knurl that allows for easy adjustment with the workpiece diameter. It is suitable for cutting knurling and can be used on large lathes. It is made with a carbide axle. By simply rotating the head, it can be used on both right-hand and left-hand lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment of the workpiece diameter ■ Simple adjustment with a wrench ■ Made with a carbide axle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 21.55 VDI" is a double-type cutting knurling tool suitable for cutting knurling processing. Adjustment with a wrench and aligning the knurling wheel with the workpiece diameter is easy. It features a rotatable head for better knurling adjustment. It can be used on machine tools such as Swiss-type lathes, multi-spindle lathes, general-purpose lathes, and CNC lathes. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment of the knurling wheel to the workpiece diameter ■ Simple adjustment with a wrench ■ Traversing feed (F) only ■ Rotatable head for better knurling adjustment *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 21.55" is a double-type cutting knurling tool that can be used with a VDI shank. It allows for adjustment of the relief angle, making it easy to adjust the knurl to the workpiece diameter. By simply rotating the head, it can be used on both right-hand and left-hand lathes. It is compatible with various machine tools, including Swiss-type lathes, multi-spindle lathes, spindle-moving lathes, and CNC lathes. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment of the knurl to the workpiece diameter ■ Simple adjustment with a wrench ■ Adjustable relief angle ■ Traversing feed (F) only ■ Usable with a VDI shank *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 14.53" is a double-type cutting knurling tool that allows for the adjustment of escape angles. It is suitable for cutting knurling processes and operates only with traverse feed (F). Adjustments can be easily made with a wrench. Additionally, due to its modular design, multiple shanks can be used with the same head, making it compatible with both right-hand and left-hand lathes. 【Features】 ■ Suitable for cutting knurling processes ■ Easy adjustment of the knurling wheel to the workpiece diameter ■ Simple adjustments with a wrench ■ Usable on both right-hand and left-hand lathes ■ Adjustable escape angle ■ Operates only with traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 1 14.53" is a double-type cutting knurling tool that allows for the use of multiple shanks due to its modular design. It features adjustable relief angles, making it easy to adjust the tool to the workpiece diameter. It can be used on both right-hand and left-hand lathes. It is suitable only for traverse feed (F) for cutting knurling. It can be used with spindle-moving lathes and Swiss-type machine tools. 【Features】 ■ Easy adjustment with a wrench ■ Usable on both right-hand and left-hand lathes ■ Modular design allows for multiple shank options ■ Adjustable relief angle ■ Traverse feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MF 89.25" is a double-type cutting knurl that can be used on both right-hand and left-hand lathes, depending on how the shank is fixed. It allows for easy adjustment of the knurl to the workpiece diameter, and the head can rotate, improving the efficiency of aligning the knurl's position. It can be used on Swiss-type lathes and spindle-moving lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment of the knurl to the workpiece diameter ■ Simple adjustment with a wrench ■ Adjustable relief angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 32" is a single-type cutting knurling tool that can be easily adjusted with a wrench. It is suitable for cutting-type knurling and only supports traverse feed (F). By simply rotating the head portion, it can be used on both right-hand and left-hand lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting-type knurling ■ Easy adjustment with a wrench ■ Can be used on both right-hand and left-hand lathes by simply rotating the head portion ■ Modular design allows multiple shanks to be used with the same head ■ Only supports traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 42.12" is a cutting-type knurling tool, single type, suitable for cutting knurling. It can be used on large lathe machine tools. By simply rotating the head, it can be used on both right-hand and left-hand lathes. Additionally, due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting-type knurling ■ Easy adjustment with a wrench ■ Can be used on both right-hand and left-hand lathes by simply rotating the head ■ Modular design allows multiple shanks to be used with the same head ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 21.55" is a single-type cutting knurling tool that can be easily adjusted with a wrench. It is suitable for cutting knurling processes. Due to its modular design, multiple shanks can be used with the same head, and the relief angle can also be adjusted. Additionally, by simply rotating the head, it can be used on both right-hand and left-hand lathes, and since the head can rotate, the efficiency of aligning the workpiece is improved. 【Features】 ■ Suitable for cutting knurling processes ■ Easy adjustment with a wrench ■ Adjustable relief angle ■ Only for traverse feed (F) ■ Can be used on both right-hand and left-hand lathes by simply rotating the head ■ Improved efficiency in workpiece alignment due to the rotating head *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 14.53" is a single-type cutting knurl that allows for the adjustment of escape angles. By simply rotating the head, it can be used on both right-hand and left-hand lathes, and since the head can rotate, the efficiency of aligning the workpiece position is improved. Adjustment is easy with a wrench, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment with a wrench ■ Modular design allows for multiple shanks to be used with the same head ■ Adjustable escape angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 1 14.53" is a single-type cutting knurl that can be easily adjusted with a wrench. It is suitable for cutting knurling processing and allows for adjustment of the relief angle. The head can rotate, improving the efficiency of aligning the workpiece. It can be used on spindle-moving lathes and Swiss-type machine tools, and due to its modular design, multiple shanks can be utilized. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment with a wrench ■ Rotating head improves workpiece alignment efficiency ■ Adjustable relief angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS 89.25" is a cutting-type knurling tool, single type, suitable for cutting knurling. It is easy to adjust with a wrench, and the relief angle can also be adjusted. The head can rotate, which improves the efficiency of aligning the workpiece. Due to its modular design, multiple shanks can be used. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment with a wrench ■ Modular design allows for multiple shank usage ■ Adjustable relief angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "MFS Series" is a single-type cutting knurl that can be easily adjusted with a wrench. It is suitable for cutting knurling processes and supports only traverse feed (F). We offer a lineup including the "MFS 89.25" and "MFS 1 14.53," which allow for adjustment of the relief angle, as well as the "MFS 14.53" and "MFS 21.55," which can be used on both right-hand and left-hand lathes. 【Features】 ■ Suitable for cutting knurling processes ■ Easy adjustment with a wrench ■ Modular design allows multiple shanks to be used with the same head ■ Supports only traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M22" is a double-type rolling knurl that has a low risk of workpiece bending as long as it is not subjected to radial pressure. It uses a threaded spindle to adjust the position of the tooth. It is recommended for use with the small diameter RGE type workpieces. Additionally, it features a centering system to adjust for misalignment in the lathe. 【Features】 ■ Recommended for use with small diameter RGE type workpieces ■ Low risk of workpiece bending as long as it is not subjected to radial pressure ■ Hard metal shaft ■ Hardened surface of the arm to enhance wear resistance ■ Option: Arm for single-sided use of the workpiece *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M21" is a double-type rolling knurl designed for machining vertical surfaces, allowing for easy exchange of the workpiece due to the fixed axis with screws. It is suitable for rolling knurling processing. It can be mounted at various angles using a set of screws inside the shank. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Easy exchange of the workpiece due to the fixed axis with screws ■ Designed for machining vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M16" is a double-type rolling knurl designed for front knurling, eliminating the risk of workpiece bending due to the mutual compensation of the pressure from the knurls. It features a symmetrical knurl set to the workpiece diameter using a threaded spindle. Simple adjustments can be made with a wrench, and it is modular, allowing for the use of multiple shanks. It can be used on both right-hand and left-hand lathes, and it features an automatic centering system to compensate for any potential misalignment between the turret and the machining spindle. 【Features】 ■ Dedicated for DIN-72783 knurling ■ Shanks manufactured to the specifications of the end user ■ Eliminates the risk of workpiece bending due to mutual compensation of knurl pressure ■ Easy knurl replacement due to the fixed spindle with screws ■ Spindle made of carbide *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "M12 10.04" is a double-type rolling knurling tool that allows for the use of multiple shanks due to its modular design. It features an automatic centering system to compensate for any potential misalignment that may occur between the turret and the machining axle. With a threaded spindle, the knurling tool can be symmetrically adjusted to the diameter of the workpiece without applying pressure to the lathe's bearings. 【Features】 ■ Suitable for rolling knurling processing ■ Easy adjustment method with a wrench ■ Does not apply pressure to the lathe's bearings ■ The pressure of the knurls compensates for each other, eliminating the risk of workpiece bending ■ Suitable for both traverse feed (F) and radial feed (R) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M11" is a double-type rolling knurling tool suitable for both traverse feed (F) and radial feed (R). It is designed for processing vertical surfaces and can be mounted at various angles using a set of screws inside the shank. The head can tilt, allowing for the maintenance of the centering position between the workpiece and the tool. 【Features】 ■ Suitable for rolling knurling processing ■ The tilting head maintains the centering position between the tool and the workpiece ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Designed for processing vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M9" is a double-type rolling knurl that allows for easy replacement of the knurl due to the fixed axle secured with screws. It is suitable for rolling knurling processing and can be used on both right-hand and left-hand lathes. It can be mounted at various angles using a set of screws inside the shank. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Designed for rolling knurling processing ■ The head can tilt, maintaining the centering position of the workpiece and the knurl ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Axle made of carbide *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M7" is a double-type rolling knurling tool suitable for medium precision knurling. The head can tilt, allowing for the maintenance of the centering position between the workpiece and the tool. The HSS axle is secured with a circlip. Additionally, it is suitable for both traverse (F) and radial (R) knurling. 【Features】 ■ Suitable for medium precision knurling ■ Not intended for intensive use ■ The tilting head allows for maintaining the centering position between the tool and the workpiece ■ Well-suited for both traverse (F) and radial (R) knurling ■ HSS axle is secured with a circlip *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M5" is a double-type knurling tool that can be used on both right-hand and left-hand lathes. It can be mounted at various angles using a set of screws inside the shank. The head can tilt, allowing for the maintenance of the centering position between the knurl and the workpiece. Additionally, the fixed axle allows for easy replacement of the knurl. 【Features】 ■ Suitable for rolling knurling processing ■ The tilting head maintains the centering position between the knurl and the workpiece ■ Usable on both right-hand and left-hand lathes ■ Can be mounted at various angles using a set of screws inside the shank ■ Axle made of carbide *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M3" is a double-type rolling knurl that allows for easy adjustment with a adjusting nut, eliminating the risk of workpiece bending as the pressures of the knurls compensate for each other. It features a threaded spindle, enabling symmetrical adjustment of the knurls to the diameter of the workpiece, without applying pressure to the lathe's bearings. The HSS axle is secured with a circlip and is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling ■ Easy adjustment with an adjusting nut ■ Does not apply pressure to the lathe's bearings ■ Eliminates the risk of workpiece bending due to mutual compensation of knurl pressures ■ HSS axle is secured with a circlip *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M2" is a double-type rolling knurling tool that allows the head to rotate and can hold three pairs of knurls. It is suitable for rolling knurling processing. Since it can rotate, it maintains the centering position of the knurl and the workpiece. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Head can rotate and holds three pairs of knurls ■ Maintains the centering position of the knurl and the workpiece ■ Well-suited for both traverse feed (F) and radial feed (R) ■ RGE-type knurls are recommended *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M17" is a triple-type rolling knurling tool recommended for small-diameter workpieces. The automatic centering mechanism significantly improves work efficiency. The knurls are arranged at a distance of 120° and rotated using a synchronization ring. The axis, fixed with a circlip, allows for easy replacement of the knurls. 【Features】 ■ Recommended for small-diameter workpieces ■ Knurls are arranged at a distance of 120° and rotated using a synchronization ring ■ The automatic centering mechanism significantly improves work efficiency ■ Suitable for front (F) knurling ■ Easy replacement of knurls due to the axis fixed with a circlip ■ HSS axis *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M20" is a single-type rolling knurl that allows for easy exchange of the knurl due to its fixed axle secured by screws. It is suitable for both traverse feed (F) and radial feed (R). In the case of traverse feed (F), only the knurl patterns RAA, RBL, and RBR are available. 【Features】 ■ Suitable for rolling knurl processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ Easy exchange of the knurl due to the fixed axle secured by screws ■ For processing vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M19" is a single-type rolling knurl suitable for both traverse feed (F) and radial feed (R). In the case of traverse feed (F), it is only available in the RAA, RBL, and RBR patterns. It is designed for internal rolling knurl processing, allowing for easy replacement of the workpieces due to the fixed axle secured by screws. 【Features】 ■ Designed for internal rolling knurl processing ■ Suitable for both traverse feed (F) and radial feed (R) ■ Easy replacement of workpieces due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The M15 is a single-type rolling knurl that can be used on both right-hand and left-hand lathes. Thanks to the rotating head, it is easy to align the knurl with the angle of the workpiece's cylinder, and it adopts a double-head blocking system, providing high rigidity for the entire holder. The knurl can be easily replaced due to the fixed axle secured by screws. 【Features】 ■ Suitable for cylindrical or frontal rolling knurling ■ Easy alignment of the knurl with the angle of the workpiece's cylinder due to the rotating head ■ High rigidity of the entire holder with the adoption of a double-head blocking system ■ Usable on both right-hand and left-hand lathes ■ Axle made of carbide ■ Easy replacement of the knurl due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M10" is a single-type rolling knurling tool for machining vertical surfaces. It can be mounted at various angles using a set of screws inside the shank. The axle, fixed with screws, allows for easy replacement of the knurling wheels. 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ For machining vertical surfaces ■ Easy replacement of knurling wheels due to the axle fixed with screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M8" is a rolling knurl that allows for easy replacement of the wheels due to its fixed axle secured by screws. It can be mounted at various angles using a set of screws inside the shank. It can be used on Swiss-type lathes, multi-spindle lathes, main spindle moving lathes, general-purpose lathes, and CNC lathes. 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ Axle made of carbide ■ Easy replacement of the wheels due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M6" is a rolling knurl that allows for easy replacement of the workpiece due to its fixed axle secured by screws. It can be mounted at various angles using a set of screws inside the shank. It is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Axle made of carbide ■ Easy replacement of the workpiece due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M4" is a single-type knurling tool that can be mounted at various angles. It allows for easy replacement of the knurling due to the fixed axle with screws. It is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Made with carbide for durability ■ Easy knurl replacement due to the fixed axle with screws *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M1" is a single-type rolling knurling tool suitable for medium precision knurling. It is ideal for both traverse (F) and radial (R) knurling. The HSS shaft is secured with a circlip. 【Features】 ■ Suitable for medium precision knurling ■ Ideal for both traverse (F) and radial (R) knurling ■ HSS shaft is secured with a circlip ■ AA pattern knurls are recommended ■ Available machine tools: general-purpose lathes *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "M23" is a double-type rolling knurl that employs a centering system to adjust for lathe misalignment. There is a low risk of workpiece bending as long as radial pressure is not applied, and the position of the teeth is adjusted using a threaded spindle. 【Features】 ■ Recommended for small diameter RGE type components ■ Low risk of workpiece bending as long as radial pressure is not applied ■ Employs a centering system to adjust for lathe misalignment ■ Hard metal shaft ■ Adjusts the position of the teeth using a threaded spindle ■ Hardened surface of the arm to enhance wear resistance *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Founded in Spain in 1970, KENFILT has supported the Japanese metal processing industry for 30 years since introducing its first machine to Japan in 1991. The coolant centralized management technology is the optimal solution for improving the precision of processed materials, saving space in factories, maintaining cleanliness, and facilitating ISO certification. KENFILT's pre-coated centralized filtration system uses cellulose as a filtration aid, maintaining the concentration of suspended solids in oil below 35 mg/L and enabling a filtration quality assessment equivalent to ISO 4406 CODE 19/16, with a range of 2µm to 5µm. The filtration technology that removes sludge from coolants used in various processes is backed by years of experience and proven results, regardless of the type of coolant. In this era of heightened environmental awareness, KENFILT has received certification for ISO 14001, the most important international environmental management system standard, recognizing its commitment to pursuing advanced technology while maintaining sound practices. Remaining a reliable manufacturer is KENFILT's corporate philosophy.

• others

Grind Master has developed various NANOFINISH attachments that can be mounted on different lathes. They are smooth, compact, and available in different sizes to meet various requirements. These attachments transform a standard lathe into a high-value super finishing machine with minimal cost and effort.

• Work tools

The super finishing machine uses a head composed of a film-coated abrasive that is stretched around a vibrating contact wheel, which is held against the workpiece between centers. This process helps to produce surface finishes of up to Ra 0.05.

• Work tools

The microfinishing machine uses a head composed of a film-coated abrasive with shoe-type backup material that covers workpieces such as crankshafts/camshafts vibrating between centers. This process also achieves improvements in geometric parameters such as roundness. ➡ Features Grind Master NANOSMART Industry 4.0 compatible controller Grind Master NANOFINISH control system Modular design - compact, energy-efficient, user-friendly Optimized cycle time Quick setup changes Rapid tooling changes

• Work tools

We offer the 'GH Series' grinding machines for gears, shafts, worms, rotors, and screws. This is one of our universal solutions tailored to customer applications, capable of handling workpieces up to 500mm in diameter. 【Product Lineup】 ■G375H ■G500H ■GP500H ■GR500H ■GRX500H, etc. *For more details, please download the PDF or contact us.

• Work tools

We handle coolant filtration systems. We conduct research, design, and development of equipment that meets the strict conditions required for various processing, and by proposing suitable filtration systems, we can improve efficiency and productivity. Please feel free to contact us if you have any requests. 【Benefits】 ■ Improved tool life ■ Improved grinding wheel life ■ Improved machine life ■ Improved surface roughness ■ Improved shape accuracy, etc. *For more details, please download the PDF or contact us.

• others

We handle the mobile diagnostic tool 'Wifi BoxNG' from Montronix. It diagnoses machine conditions through mobile 3D vibration analysis and optimizes cutting data. Additionally, it performs diagnostics independently of the machine and system using wireless technology. 【Features】 ■ Diagnosis of bearings, linear axes, ball screws, guide systems, etc. ■ Process analysis and optimization ■ Condition monitoring *For more details, please download the PDF or contact us.

• Other measuring instruments