扶桑工業 List of Products and Services

We would like to introduce the "Standard Penetration Test Equipment" that we handle. We offer the "Double Tube Split Barrel Sampler" for collecting samples to measure moisture density, water content ratio, etc., and the "Knocking Block Coupling (Anvil)" that receives the impact of the drive hammer used in the standard penetration test. Additionally, we also have the "Basket Shoe," which is equipped with a basket spring on the tip shoe. 【Lineup】 ■ Split Barrel Sampler ■ Double Tube Split Barrel Sampler ■ Knocking Block Coupling (Anvil) ■ Basket Shoe ■ Penetrometer (F-75) *For more details, please refer to the PDF document or feel free to contact us.

• Geological Survey
• Boring Company

The "AH-1B(SWT)" is a semi-automatic drop device that reliably opens the hook at a standard drop height of 76 cm, ensuring accurate impact energy. The hammer dimensions are φ178X434Lmm, with a mass of 80.0 kg. Additionally, by using a guide rod that employs "SWT screws," testing can be conducted without worrying about screw loosening. 【Features】 ■ Testing can be performed without concern for screw loosening by using a guide rod with SWT screws. *For more details, please refer to the PDF document or feel free to contact us.

• Boring Company

The "WPS-90" is a water pressure piston sampler used for sampling cohesive soils with N values ranging from 0 to 8, as well as soft to moderately firm ground. By using SUS for the outer tube, the lifespan is further increased. Additionally, we offer "Thin Wall Liners" that can be used as sampling tubes, such as fixed piston type and water pressure type samplers. 【WPS-90 Features】 ■ The use of SUS for the outer tube further increases the lifespan. *For more details, please refer to the PDF document or feel free to contact us.

• Geological Survey

The "SWT tools" are guide rods for standard penetration tests that are resistant to loosening with just hand tightening. The connection points of the rods are less likely to loosen from impact, making them durable and long-lasting. Additionally, the replacement timing can be visually confirmed, ensuring safety. Please feel free to consult us when needed. 【Features】 ■ Resistant to loosening with just hand tightening ■ Durable and long-lasting ■ Replacement timing can be visually confirmed for safety *For more details, please refer to the PDF materials or feel free to contact us.

• Geological Survey

The "FSD-2" is a safety deck for geological surveys that is easy to install on scaffolding. With a frame height of 0.9m and a working space of 44×50cm, it allows for comfortable operation. Additionally, by changing the mounting position of the front clamp, the deck position can be moved inward. 【Features】 ■ Easily attachable to scaffolding ■ Frame height of 0.9m, with a working space of 44×50cm ■ Changing the mounting position of the front clamp allows the deck position to be moved inward ■ The stage is made of expanded metal, making it slip-resistant ■ By simply swapping the frame, the deck can be accessed from the left, right, or rear *For more details, please refer to the PDF document or feel free to contact us.

• Geological Survey

We would like to introduce our "Boring Rods and Couplings" that we handle. We offer "Boring Rods (Coupling Connection Type)" which transmit rotation and thrust to the bit and supply fluid to the cutting edge, as well as "Friction Welded Rods (FW40.5)" with male and female joints friction-welded at both ends of a φ40.5 pipe. Additionally, we also have "Boring Rod Couplings" used for connecting rods. 【Product Lineup】 ■ Boring Rods (Coupling Connection Type) ■ Friction Welded Rods (FW40.5) ■ Boring Rod Couplings ■ Rod Reducers ■ Wing Couplings *For more details, please refer to the PDF document or feel free to contact us.

• Boring Company

We would like to introduce the "Holders" that we handle. We offer the "Rod Holder (Type B)" which holds the rod during the lifting and lowering of the boring rod, as well as the lightweight "KAMSY-B," which is 40% lighter than conventional holders. Additionally, we have the "Lowering Iron (IT-1)," a simple lowering device that can also serve as a rod holder for shallow boring. 【Product Lineup】 ■ Rod Holder (Type B) ■ KAMSY-B ■ Lowering Iron (IT-1) *For more details, please refer to the PDF document or feel free to contact us.

• Boring Company

"HOP-1.5" is a hoisting plug used for the lifting of drilling rods and casing tubes. It is easy to use and suitable for rod lifting operations. Additionally, the joint is designed to rotate freely, and there are threads at the bottom for connecting to the drilling rod. 【Features】 ■ Compact slim body ■ Joint rotates freely *For more details, please refer to the PDF document or feel free to contact us.

• Other elevators and transport systems

The "TTS-99T" is a triple tube sampler that uses PVC pipes for the liner, making it convenient for handling samples. This product is used for collecting clay with an N value of 4 or higher, or sandy soil with an N value of 10 or higher. It is also suitable for loose sandy soil and dense gravel. 【Features】 ■ Convenient sample handling due to the use of PVC pipes for the liner ■ Applicable to loose sandy soil and dense gravel *For more details, please refer to the PDF document or feel free to contact us.

• Geological Survey

We would like to introduce the "taps" that we handle. We offer the "Inside Rod Tap," which screws into and retrieves the residual pressure rods and boring rods inside the hole, as well as the "Step Inside Rod Tap," which can be used in two ways: with a rod coupling tap at the front and a rod inside tap at the rear. In addition, we also provide the "Inside Rod Tap," which screws into and retrieves boring rods inside the residual boring rods. 【Product Lineup】 ■ Inside Rod Tap (for pressure rods) ■ Step Inside Rod Tap ■ Inside Rod Tap ■ Outside Rod Tap ■ Core Tube Tap *For more details, please refer to the PDF document or feel free to contact us.

• Boring Company

We would like to introduce our "Segment Tube Couplings" that we handle. These are tubes used to collect and contain slime, which connect to the segment tube coupling at the top of the core tube, referred to as "Segment Tubes." We also offer "Segment Tube Couplings" that connect the core tube to the segment tube and further connect to a rod. Additionally, we have the "Segment Coupling for Double Core Tubes," which connects the segment tube to a double core tube. 【Product Lineup】 ■ Segment Tube ■ Segment Tube Coupling ■ Segment Coupling for Double Core Tubes *For more details, please refer to the PDF document or feel free to contact us.

• Piping and insulation
• Fittings

We would like to introduce the "Safety Tools" that we handle. The "Standard Penetration Test Guide Rod (SWT)" allows you to work without worrying about the loosening of screws during penetration tests, simply by tightening it lightly by hand. We also offer "Hose Wrapping Prevention Fittings" to prevent wrapping on boring rods such as delivery hoses and winding ropes. In addition, we have the "SDS-40" head for pipe tripod towers and the "Geological Survey Safety Deck" to make work on tripod towers safer. 【Lineup】 ■ Standard Penetration Test Guide Rod (SWT) ■ Hose Wrapping Prevention Fittings ■ Tripod Head "SDS-40" ■ Geological Survey Safety Deck *For more details, please refer to the PDF materials or feel free to contact us.

• Boring Company
• Safety and consumables

The "SBS-JIS4 Mountain KANO" is a split barrel sampler used for the standard penetration test of soil according to JIS standards. It consists of a shoe, a split barrel that can be divided into two parts, and a connector head, and is used for measuring the N value and collecting soil samples. Additionally, there are variations such as the "SBS-3," which is a double-tube type sampler equipped with an inner liner for use in standard penetration tests, and the "Basket Shoe," which has a basket spring attached to the tip shoe for use in layers where samples, such as sand layers, are likely to fall off. 【Features of SBS-JIS4 Mountain KANO】 ■ Composed of a shoe, a split barrel that can be divided into two parts, and a connector head. *For more details, please refer to the PDF document or feel free to contact us.

• Geological Survey

The TS-5 is a fixed piston type thin-walled sampler designed to collect soft fine-grained soils in a saturated state, such as silts, clays, and organic soils with a consistency of N=0 to 4, without disturbing them. Its simple structure allows for easy disassembly and assembly. Additionally, we offer "thin-walled liners" that can be used as sampling tubes for fixed piston and hydraulic samplers. 【TS-5 Features】 ■ Collects silts, clays, and organic soils with a consistency of N=0 to 4 without disturbance. *For more details, please refer to the PDF materials or feel free to contact us.

• Geological Survey

We would like to introduce the "Core Tube Coupling" that we handle. We offer "Core Tubes," which are steel pipes for housing cores and are available in Fuso standards and JIS standards, as well as "Prolong Couplings," which are fittings for connecting two or more core tubes. Additionally, we also provide the "Core Shell Complete," which connects between the core tube and the metal crown to hold the core. 【Product Lineup】 ■ Core Tube ■ Core Tube Coupling ■ Core Tube Coupling (with chip) ■ Prolong Coupling ■ Core Shell Complete *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and insulation
• Fittings

We would like to introduce the "Casing Tools" that we handle. We offer "Gas Pipe Casing Tubes" used for anchor construction and borehole drainage, as well as "Schedule Pipe Casing Tubes" with a gas pipe size and thick wall type. Additionally, we have a powerful type of casing tube that enhances the tensile strength, called "Power Type Casing Tube (HD Type)." 【Lineup】 ■ Gas Pipe Casing Tube ■ Schedule Pipe Casing Tube (Thick Wall) ■ Power Type Casing Tube (HD Type) ■ Other Casing Tubes *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment
• Gas equipment
• Piping and insulation

We handle the "Water Swivel Series." We offer the "WS-9," which significantly improves sealing performance and allows for packing tightening without removing the head, and the "WS-8," which allows for packing adjustment when the head is removed and enables grease lubrication, extending the packing's lifespan. Additionally, we have the ultra-lightweight water swivel "WSL-40A," which features a new cap seal for easy packing replacement. 【Lineup】 ■WS-9 ■WS-8 ■WSL-40A *For more details, please refer to the PDF document or feel free to contact us.

• Water supply facilities
• pump
• Fittings

"GAIA EX" is a soil contamination investigation drilling machine that combines a compact mini-excavator with our unique impact mechanism. It enables rapid and high-quality sampling of samples. Additionally, by equipping it with a special soundproofing device, the sound pressure level is significantly reduced. [Features] - High-quality samples - Achieves low noise - Compact, clean, and powerful - Well-equipped *For more details, please download the PDF or feel free to contact us.

• Drilling Machine

The "KR-SH Series" is an ultra-compact drilling machine suitable for use in narrow spaces in mountainous areas and urban environments. Thanks to its double cylinder design, it enables stable drilling. Additionally, despite its ultra-compact size, it is equipped with a large feed force. 【Features】 ■ (For 300 strokes) Easily disassembles into blocks with a maximum disassembly weight of 38 kg at the swivel head. ■ Equipped with a bellows spindle cover and other safety features in accordance with safety and health regulations, allowing for safe operation. ■ Spindle lengths of 300, 400, and 500 can be selected. *For more details, please download the PDF or feel free to contact us.

• Drilling Machine

The "KR-100HB Series" is a lightweight, compact drilling machine that is easy to disassemble and assemble, making relocation and transportation tasks simple. All control levers are concentrated on the front, making it very user-friendly. Additionally, the spindle descent speed can be adjusted with a dedicated valve, allowing it to handle soft ground layers and layers with significant differences in hardness. 【Features】 ■ Optional cone pulley cover and feed speed increase device can be installed ■ The drum can be removed, allowing operation with only the cone pulley ■ Can be equipped with a drilling pump, making it compact and easy to handle (models 2 and 3 only) ■ Standard safety features include a bellows and spindle cover on the swivel head rotation part, ensuring safe operation in accordance with health and safety regulations. *For more details, please download the PDF or feel free to contact us.

• Drilling Machine

The "V5-P" is a horizontal single-cylinder double-acting piston pump that achieves lightweight and compact design by using aluminum alloy for valve boxes and cases. It can be transported by one person and can be installed in narrow spaces. Additionally, the heart of the pump is fully carburized, hardened, and polished, resulting in a pump with extremely low wear. 【Features】 ■ All gears have a large module for high safety ■ The pulley can be mounted on either side ■ When mounted on our drilling machine, it can further utilize its features *For more details, please download the PDF or feel free to contact us.

• pump

The "KTM-200B" is a lightweight and compact horizontal three-way chemical mixer. It has excellent acid resistance and is made of a poly container, so there is no corrosion. It is suitable for mixing operations that require rapid and large amounts of chemical injection. 【Features】 ■ Built-in step platform in the storage tank allows for easy addition of hardeners and other materials ■ The mixer frame is bolted together, making it easy to maintain ■ Adoption of a full bore cock increases the drop speed of the solution, improving work efficiency ■ Optionally, it can be changed to a base type that can be loaded with a forklift *For more details, please download the PDF or feel free to contact us.

• Foundation construction machinery

"ROCKBOY" is a specialized drilling machine for rock bolt construction, featuring a simple structure that allows for easy disassembly and assembly of the percussion section. In stable ground, it employs the "single pipe drilling method," while in unstable ground, it uses the "double pipe drilling method." 【Features】 ■ Compact and powerful drill head ■ Lightweight and small (550kg) ■ Simple structure for improved maintenance ■ Compatible with double pipe drilling *For more details, please download the PDF or feel free to contact us.

• Drilling Machine

We handle "Metal Crowns" that are used in connection with core tubes and core shell completes. These are core bits primarily used for drilling medium hard rock and soft rock, with carbide tips (metal tips) embedded at the cutting edge. All aspects of the blank crown, including outer and inner diameters, threaded sections, and tip embedding holes, are processed using NC machines, resulting in high precision products. 【Features】 ■ High precision blank crowns ■ A wide variety of metal tips ■ Uniform brazing using high-frequency equipment *For more details, please download the PDF or feel free to contact us.

• Work tools

The "PLC-64/74/84" is a pinless coupling that has improved rust prevention and wear resistance effects due to special surface treatment. During drilling, drilling water is sent to the core tube, and when pulling up the boring rod, the water inside the rod is blocked at the top of the core tube to prevent the core (sample) from falling off. 【Features】 ■ Exhibits outstanding power for core sampling ■ Rust prevention and wear resistance effects are enhanced by special surface treatment ■ Resolves concerns about core drop *For more details, please download the PDF or feel free to contact us.

• Fittings

The "non-coring bit" is a bit used for drilling rocks as a slime rather than as a core. There are various types available, such as the "cross bit" used for drilling through clay layers, sandstone, and soft rock, and the "Y-type bit" with three wings for drilling purposes. 【Lineup】 ■ Cross Bit ■ Y-Type Bit ■ Y-Type Bit (Type A) ■ Rock Bit *For more details, please download the PDF or feel free to contact us.

• Work tools

The "V6-D" is a double-acting plunger pump that can be easily disassembled by loosening the lock nut and rotating the plunger, allowing for easy plunger replacement. As an option, you can also choose a reinforced plunger that offers excellent durability. 【Features】 ■ Excellent durability ■ Strongly prevents the intrusion of muddy water into the gear case ■ Easy plunger replacement using a hook wrench ■ Reinforced plunger with excellent durability can also be manufactured *For more details, please download the PDF or feel free to contact us.

• pump

The "Eco-Speed Method (R)" is a polymer natural gas pressure welding method that achieves excellent bonding using reducing agents and natural gas. By attaching a PS ring to the end face of the rebar in advance, oxidation is prevented by the reducing gas generated through heating. It addresses issues that cause poor bonding, such as adjusting the reducing power with the reducing flame, the effects of wind and rain, and inadequate burner fixation for shielding. 【Features】 ■ Environmental: Can reduce CO2 emissions by 60% ■ Safety: No backfire ■ High quality: Effectiveness of reducing agents & excellent joint performance ■ Workability: Ensures quality & reduces workload ■ Economic: Cost remains the same, etc. *For more details, please download the PDF or contact us.

• Special Construction Method