磯村 List of Products and Services

This is an introduction to a case where it was required to achieve "high accuracy and stable measurements" by adding the necessary specifications for reliable water quality measurement devices in water supply facilities. By equipping the devices with features such as automatic cleaning and automatic calibration, high-accuracy measurements are consistently performed. Various setting functions enable measurements tailored to specific situations. The devices support a variety of measurements, including "residual chlorine meters," "turbidity meters," "color meters," "pH meters," "conductivity meters," and more. [Case Overview] ■ Purpose of Implementation - It was required to achieve "high accuracy and stable measurements." ■ Implementation Effects - Various setting functions allow for measurements suited to specific situations. *For more details, please refer to the related links or feel free to contact us.

• Water quality/pH measuring device

While utilizing existing facilities, we introduce a case where a new UV device was connected to conventional water purification equipment to distribute safer drinking water and implement preventive measures against the concerning Cryptosporidium. To secure safe drinking water under harsh conditions, we designed a system that integrates "filtration devices," "UV devices," and "aeration devices." By ensuring reliability based on conventional filtration equipment and adding new mechanisms and controls, we achieved a facility with high water purification accuracy. [Case Overview] ■ Purpose of Introduction - Implemented preventive measures against the concerning Cryptosporidium. ■ Effects of Introduction - Achieved a facility with high water purification accuracy by adding new mechanisms and controls. *For more details, please refer to the related links or feel free to contact us.

• others

We would like to introduce a case study of the implementation of a "chemical injection device." There were concerns about the decrease in residual chlorine at the remote terminal water distribution reservoir from the water purification plant. However, since there is a risk of excessive chlorine injection at the purification plant, an automatic adjustment device for water quality measurement and additional chlorine injection at the relay station was required. Therefore, by continuously monitoring the residual chlorine at the relay station and automatically injecting the appropriate amount of chemicals according to the readings, a constant residual chlorine level was maintained. Improvements were achieved with a compact and low-cost installation. 【Case Overview】 ■ Purpose of Implementation - There were concerns about the decrease in residual chlorine at the remote terminal water distribution reservoir from the water purification plant. - An automatic adjustment device for water quality measurement and additional chlorine injection at the relay station was required. ■ Effects of Implementation - Improvements were achieved with a compact and low-cost installation. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case where a "rapid filtration system" was implemented at a water treatment plant, which faced challenges in removing suspended solids due to a change in the water source. Due to the small scale of the facility, there was a demand for a compact water treatment system that would not be affected by changes in water quality due to weather, ensuring stable water purification at all times. This product performs automatic filtration control in two series, providing a consistently stable supply of drinking water. We carried out construction with a product designed to address issues of turbidity, iron, manganese, and color in the raw water, utilizing an appropriate filter media composition and equipment design. 【Case Overview】 ■ Purpose of Implementation - The removal of suspended solids became a challenge due to the change in the water source. - A compact and stable water treatment system that is not affected by weather-related changes in water quality was required due to the small scale of the facility. ■ Effects of Implementation - Achieved stable water production through dual series filtration control. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

The "Carbonic Acid Hypochlorous Water Generation System" allows for the combination of various devices, such as tanks for storing the generated carbonic acid hypochlorous water and equipment necessary for monitoring. It adopts a generation method that stabilizes gas dissolution rates, which in turn stabilizes pH. With a high gas dissolution rate, it reduces unnecessary gas consumption and lowers running costs. By diluting sodium hypochlorite with carbonated water, this carbonic acid hypochlorous water prioritizes safety, stability, reliability, and ease of use, supporting hygiene in food factories through its sterilizing properties. 【7 Benefits】 ■ Safety ■ Stability ■ High water volume ■ Multi-concentration compatibility ■ System scalability ■ Maintenance ■ Total sanitation support *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

The "PHY type" is a liquid injection unit that achieves the highest pressure resistance in its class, thanks to a newly designed cam mechanism and a high-torque DC brushless motor. It features a valve-less structure pump with the pump section submerged in liquid, ensuring reliable injection of chemical solutions. By combining a newly developed controller with CFA, it prevents any injection failures in advance and achieves even higher precision and stability compared to conventional models. 【Features】 ■ High pressure resistance ■ Compact and high-functionality integrated visual tube ■ Easy maintenance design ■ Long-term stable injection ■ Improved protection features *For more details, please refer to the PDF document or feel free to contact us.

• pump

The "CFA" is a device that monitors the discharge state of a piston pump by measuring, amplifying, and analyzing pressure waves, comparing them to normal injection conditions to check for abnormalities in discharge, such as pump failures, leaks in piping, or blockages. It features a new detection method that combines a pressure sensor and a check valve. Since it is not affected by the movement of the float, it can accurately detect discharge without being influenced by dirt or bubbles in the sight tube. 【Features】 ■ Capable of detecting even the minute discharges of small pumps ■ Allows detailed settings for various timers, enabling customization according to the equipment used ■ Automatic generation of detection sensitivity with minimal initial settings through an initial learning function ■ Equipped with a logger function ■ Includes high and low pressure detection capabilities ■ Utilizes a touch panel for high visibility and easy-to-understand setting operations *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "ISO type" is a chlorine water drip device that requires no operation and takes up little space. For the chlorine injection of very small-scale water supply systems and septic tanks, commercially available sodium hypochlorite solution can be used, and this product can effectively perform sterilization when dripped. Additionally, by filling the solution tank and opening the outlet valve, the same precise amount can be dripped until the chlorine water is almost depleted. 【Features】 ■ Can be installed at a very low cost ■ Convenient to carry ■ Requires no operation and takes up little space ■ Can always inject accurately regardless of the increase or decrease in liquid volume in the chemical tank ■ Particularly useful as a backup device for chlorine sterilization in small-scale water supply systems *For more details, please refer to the PDF document or feel free to contact us.

• others

The "LSM type" is a mechanical water level gauge with a simple and accurate structure. To prevent float slippage, a multi-stage pulley is adopted. It has airtight moisture resistance and is extremely easy to handle. Additionally, the float is made of PVC material, and the wire rope is made of stainless steel, providing excellent corrosion resistance. 【Features】 ■ Simple and accurate structure ■ Airtight moisture resistance ■ Two standard scale types available: 0-3m and 0-5m (in 10cm increments) ■ Multi-stage pulley adopted to prevent float slippage ■ Excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a telescope-type flow control device for slow filtration ponds, designed with a simple structure that eliminates potential failure points. The installation adjustment well does not require any special structure, allowing for simplified installation work and making it economical in every aspect. Additionally, due to the mechanism that automatically detects head loss, flow adjustment is easy, and operational management is smooth. 【Features】 ■ Simple structure ■ High safety ■ Automatic head loss detection ■ Easy operation ■ Available in two types: manual operation and automatic operation *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "SRA-IV type" is a residual chlorine meter suitable for managing chlorine concentration in relatively pH-stable water such as drinking water. It comes standard with signal output that supports remote monitoring. In addition to conventional residual chlorine concentration and various alarm outputs, it adds water temperature output, converting water temperatures from 0°C to 40°C into a linear electrical signal of DC 4-20 mA. Moreover, by adopting a fixed electrode method, it can reduce the lifespan of the electrodes and lower running costs. 【Features】 ■ Efficient electrode polishing method ■ Low maintenance costs ■ Automatic zero calibration function ■ Capable of external transmission ■ Compatible with conventional models *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "AT-II type" is a residual chlorine titrator that can quantitatively measure residual chlorine in water with simple operations. Residual chlorine is divided into free residual chlorine and combined residual chlorine, with combined residual chlorine further separable into monochloramine (NH2Cl2) and dichloramine (NHCl2) for individual measurement. Additionally, it is capable of measuring residual amounts of iodine and bromine, not just residual chlorine. 【Features】 ■ Can measure regardless of the turbidity or color of the sample water ■ Not affected by temperature ■ Not interfered with by coexisting ions ■ High precision, capable of measuring down to a minimum of 0.01 ppm ■ Robust and easy to operate *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "V Notch Multi Feeder" is a chemical injection device that combines our unique V-shaped variable orifice with an electromagnetic flow meter, utilizing an injector method. Made from carefully selected chemical-resistant materials, it features a simple mechanism and various safety devices, allowing for stable operation over long periods. Additionally, its excellent diffusion properties make it suitable for the injection of sodium hypochlorite. 【Features】 ■ High measurement accuracy and wide measurement range ■ Excellent chemical diffusion properties ■ High reliability ■ Remote automatic operation capability *For more details, please download the PDF or feel free to contact us.

• Medicines