大都機械 List of Products and Services

The "DMS1000S" is a semi-automatic mixer for 1-ton bulk bags that excels on-site for "semi-flexible pavement" and "water-retaining pavement" in locations such as roads and ports. Since it can mix a large quantity at once, the quality of the milk is more stable and the finish is better compared to traditional methods in the construction of semi-flexible pavement, receiving high praise. 【Features】 ■ Compact and lightweight, yet compatible with 1-ton bulk bags. Capable of mixing up to 1200 liters. ■ Can mix with a water/cement ratio of 80%. ■ Can be loaded, unloaded, and transported with a 2-ton crane. ■ Simple controls make it easy to use and resistant to breakage. ■ Water measurement is as simple as setting the numbers on a counter. *For more details, please download the PDF or contact us.

• Concrete Machinery

The SG pump series "SG-30" is a three-piston jet grout pump that allows for stable injection with minimal pulsation at high flow rates. It excels in quiet operation and has excellent compatibility with control devices, enabling precise flow adjustment through the control panel and wired remote control. The maximum pumping capacity is up to 400 liters/min, accommodating various construction methods and sites. 【Specifications】 ■ Maximum discharge pressure: 2.5 MPa (can be changed to 4.9 MPa at OP) ■ Theoretical discharge volume: 440 liters/min. *For more details, please download the PDF or contact us.

• Air compressors, blowers and pumps

The "TS-103MT" is a built-in inverter squeeze (mortar) pump capable of flow rate adjustment from 30 to 200 liters/minute through inverter control. The roller that crushes the tube is designed with a three-point system, which improves quietness and reduces pulsation. Additionally, it has a low occurrence of clogging, excellent suction power, and can pump without leaving any sediment. 【Specifications】 ■ AC200V three-phase power supply: 7.5kw ■ Two-stage pulley drive inverter control ■ Maximum discharge pressure: 1.5MPa ■ Discharge volume: approximately 30 to 200 liters/minute *For more details, please download the PDF or contact us.

• Air compressors, blowers and pumps

The "MM-105" is a squeeze (mortar) pump that can be used for the injection of backfill in road and railway tunnel void filling construction. Due to its valve-less structure, it can handle solid materials and fibers without any issues. It pumps the materials without damaging them. Additionally, since it only passes through the tube, it does not damage the mechanical parts, making maintenance and repairs easy with just a tube replacement. 【Features】 ■ Suitable for pumping a wide range of viscous materials ■ Excellent self-priming capability ■ Easy to clean ■ Compact built-in reduction gear ■ No sealing parts, so there are no leaks due to seal damage *For more details, please download the PDF or contact us.

• Air compressors, blowers and pumps

The "DM-300" is a compact fully automatic plant integrated with a cement silo that can be loaded onto a 2-ton truck, making it effective as a mobile plant. It can be loaded with a 1-ton bulk bag into the cement silo equipped with a hopper, and it features a cement level detector that alerts you with a buzzer for the next loading. In addition to water and cement, it controls the input of four other types of materials, allowing for a wide range of applications. 【Features】 - Mixer stirring capacity of 250 liters, agitator stirring capacity of 350 liters - Comes with a remote control for remote operation - Compact and lightweight, making it transportable by a 2-ton truck *For more details, please download the PDF or contact us.

• Concrete Machinery

The "DM-500" is a compact fully automatic mixing plant that can be loaded onto a 2-ton truck and can be delivered in two parts, making it ideal for construction in narrow spaces. It has a capacity to continuously supply 100 liters per minute, and operates automatically for everything except for loading into the silo. In addition to water and cement, it controls the input of three other types of materials, allowing for a wide range of applications. 【Features】 ■ Mixer stirring capacity of 350 liters, agitator stirring capacity of 500 liters ■ Silo and mixer are separate, making transportation convenient ■ Can load 1-ton bulk bags into a cement silo equipped with a hopper ■ Direct loading from a large silo to a dedicated silo is also possible (optional setting), etc. *For more details, please download the PDF or contact us.

• Concrete Machinery

The "DM-700" is a compact semi-automatic plant that excels in various situations such as residential construction and road work. Water supply can be automatically measured with simple settings, and it can mix with a water-cement ratio of 70% using ton packs. It operates semi-automatically, resulting in fewer breakdowns and significantly improved work efficiency. 【Features】 ■ Despite its small and lightweight design, it supports 1-ton flexible containers ■ Capable of mixing with a water-cement ratio of 80% ■ Can be loaded onto a 2-ton vehicle ■ Simple and easy-to-use controls that are durable ■ Water measurement is done by simply setting the numbers on a counter *For more details, please download the PDF or contact us.

• Concrete Machinery

The "DM1500-40" is a fully automatic mixing plant capable of producing over 40m3 per hour, with a batch mixing time (1.2m3) of less than 90 seconds. Water supply can be accurately provided in a short time from the upper water tank of the plant (2.5m3) through 200A×1 and 80A×1 (with air cut valve). Additionally, the mixer section uses special turbine blades, allowing for the production of high-quality milk paste in a short time. 【Features】 - The milk discharge valve has been enlarged to 250A, significantly reducing discharge time. - Stability of each control section has been improved, further shortening operation time. - When used in combination with a high-speed silo, approximately 40m3/H is possible. - Two mixing formulations (A-B) can be set. - Capable of loading onto large low-floor trucks (flatbed), etc. *For more details, please download the PDF or contact us.

• Tree protection materials and plant boxes
• Concrete Machinery

The "SHA-1000" is a large-scale oscillating agitator equipped with a storage capacity of 2.5m3 and four discharge ports. Due to its oscillating mixing, it can store solvents that are not suitable for conventional rotary agitators without compromising quality. 【Features】 ■ Maximum mixing capacity is 0.8m3, with a 2.5m3 type available for large-scale construction ■ Suitable for storing plastic grouts, high-viscosity materials, mortars (1:3), etc. *For more details, please download the PDF or contact us.

• Concrete Machinery
• Mortar and plaster materials

The "DAM-2000" is an agitator that features plate-like blades that move slowly like a cradle, making it difficult for sedimentation to occur during mixing. It is suitable for holding mortars and plastic grouts. Additionally, the top cover is mesh-like, and the drop opening is flexible, allowing for easy combination with various mixers. 【Features】 ■ An agitator suitable for storing plastic grouts, high-viscosity materials, and mortars (1:3) ■ Equipped with four discharge openings in addition to a storage capacity of 2.5m³, making it suitable for large-scale construction ■ Our plant "DM-700A" (Aqua Plant) is designed with a swinging mixer installed at the bottom, allowing for the combined use of "SHA-1000" and "DAM-2000" ■ Due to its oscillating mixing, it can store solvents that are not suitable for conventional rotary agitators without compromising quality, among other benefits. *For more details, please download the PDF or contact us.

• Concrete Machinery
• Mortar and plaster materials

The "DM-1500" is a compact, fully automatic mixing plant with a production capacity of 20m3/H, utilizing a continuous weighing method for water and cement. It can be connected to existing cement silos for automatic operation. Cement is supplied continuously via a screw feeder, ensuring uniform production of cement paste. Additionally, bentonite can also be supplied as an option, along with water and cement. 【Features】 ■ Can be loaded onto a 10-ton truck ■ Capable of producing high-quality milk in a short time ■ Two types of mixing patterns can be set ■ Custom specifications available for fluidization methods ■ Inspection window installed on the mixer for easy cleaning *For more details, please download the PDF or feel free to contact us.

• Construction machinery leasing and rental