高翔産業 List of Products and Services

This catalog is the "Supplement Issue of Material Encyclopedia" introducing Takasho Sangyo Co., Ltd.'s 2022 Autumn/Winter products. In addition to new products such as the water circulation drilling system "AquaRecycle," a wide variety of items from the "WINTER GOODS COLLECTION" are also available. The "PVC Strainer" is sold out at a 30% discount during the clearance sale. *Sale ends when stock runs out. We have also included a new registration and FAX order sheet. Please make use of it for selecting products. 【Featured Products (Partial)】 ■ Long Step W ■ Step Shoulder ■ Denim Backer Shoulder ■ Finisher 495mm (with adhesive) ■ Finisher 8-piece cut (with adhesive) *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Safety and consumables
• Other lighting fixtures

We would like to introduce our product, "Good Step." It has a total length of 1,025mm, a width of 400mm, and weighs 5.2kg. Additionally, it has a load capacity of 100kg. It can be hung on balcony rails or partition walls up to 20cm thick to create a scaffold. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Ladder width - Outer = 32.5cm - Inner = 26.5cm ■ Pipe diameter: 30mm ■ Rubber cushion at wall contact points *For more details, please refer to the PDF document or feel free to contact us.

• others
• Scaffolding and Support Materials

We would like to introduce our cleaning product, the "Injection Wipe." It is made from cut fabric of knitted wipes, which can be used to fill cracks and holes during injection work to prevent leaks and absorb moisture. This product is sold by weight. (As a rough estimate, approximately 3,000 pieces) Please feel free to contact us when placing an order. 【Specifications】 ■ Product Name: Cut Wipe (Injection Wipe) ■ Packing Weight: 2.0kg (packed with a mix of cut pieces approximately 3cm to 5cm square) *For more details, please refer to the PDF document or feel free to contact us.

• others
• Safety and consumables

We would like to introduce our lifting equipment, the "Blue Sling IV E." Polyester has significantly less stretch compared to nylon when a load is applied, providing excellent stability. Additionally, it absorbs very little water and has good weather resistance, making it an ideal material for outdoor use. 【Features】 ■ Significantly less stretch compared to nylon when a load is applied ■ Absorbs very little water ■ Good weather resistance ■ Ideal material for outdoor use *For more details, please refer to the PDF document or feel free to contact us.

• others
• Work tools

We would like to introduce the 'Polilight Mocco', which is suitable for transporting earth and sand. It is lightweight, easy to fold, and can be stored compactly. Made from polyester and a unique dip-coated material, it offers excellent durability. Additionally, eco-recycled materials are used for reinforcement to prevent bottom slippage, and the belt section is double-stitched for strength and longevity. 【Features】 ■ Safe working load of 2 tons for all types ■ Sewn with high-strength thread using a special sewing machine ■ Lightweight, easy to fold, and compact for storage ■ Excellent durability with polyester and unique dip-coated material ■ Belt section is double-stitched for strength and longevity *For more details, please refer to the PDF document or feel free to contact us.

• others
• Work tools

We would like to introduce our lifting equipment, "Carry." This product can be conveniently used as a winch carry and can be folded compactly with a single touch for easy storage. We offer models for "one-gallon cans" and "two-gallon cans." Please feel free to contact us if you need any assistance. 【Specifications】 <For one-gallon cans> ■ Size: W250mm × D265mm × H305mm ■ Load capacity: 30kg <For two-gallon cans> ■ Size: W500mm × D265mm × H305mm ■ Load capacity: 60kg *For more details, please refer to the PDF document or feel free to contact us.

• others
• Safety and consumables

We would like to introduce "Kutsu Tsukāzu II," handled by Kōshō Sangyō Co., Ltd. It is a cover type that simply slips over shoes and can be reused multiple times. Made from non-transfer silicone material, it does not affect painting. It can also be used as a cover to prevent dirt on shoes during asphalt paving work. 【Specifications】 ■ Material: Silicone rubber ■ Size: 295×170mm ■ Compatible shoe sizes: 26–28cm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce the "Pika Safe Safety Vest No. 326-60," handled by Kōshō Sangyō Co., Ltd. It has a wide reflective surface and excellent visibility, making it suitable for safe work at night or in dark places. The material consists of 60mm PVC reflective tape for the reflective part and nylon mesh for the body. Please feel free to consult us if you have any requests. 【Features】 ■ Size - Length: 60cm - Waist: Free (fits up to 120cm) ■ Material - Reflective part: 60mm PVC reflective tape - Body: Nylon mesh *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

We would like to introduce the "Fabric Protective Sheet (Vietnam Sheet)" handled by Kōshō Sangyō Co., Ltd. It can be reused multiple times and folds up for compact storage. With a suitable weight, it conforms to the shape of the substrate and is resistant to curling. Additionally, it can be washed in a net. Please feel free to consult us if you have any requests. 【Lineup】 ■KY-1000 Size: Approximately 2.5×3m ■KY-2100 Size: Approximately 1.5×4m *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "SB-246S" handled by Kōshō Sangyō Co., Ltd. It is difficult to tear and easy to peel off. It demonstrates excellent adhesion even on condensation surfaces and acid-washed surfaces. Please feel free to consult us if you have any requests. 【Specifications】 ■ Base material: Green washi paper ■ Adhesive: Acrylic-based ■ Thickness: 0.10mm ■ Adhesion strength: 1.88N/cm * For more details, please refer to the PDF document or feel free to contact us.

• Work tools

"TS NEW Corona Masker" is a polyethylene protective sheet with cloth tape attached. It excels in water resistance, weather resistance, humidity resistance, and chemical resistance. The surface of the sheet has undergone corona discharge treatment, which enhances paint adhesion and reduces peeling and splattering of the paint after drying. Please feel free to consult us if you have any requests. 【Product Lineup】 ■850-10, Size: 300mm x 25m ■850-11, Size: 550mm x 12.5m ■850-12, Size: 550mm x 25m ■850-13, Size: 1100mm x 25m *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce our "Varnished Pail Can." The material is chrome-plated steel sheet, and the capacity is 20L. The dimensions are 367.5mm in height and 306mm in diameter. It can be sealed with a lid that has a rubber gasket. Please feel free to consult us if you have any requests. 【Specifications (Excerpt)】 ■ Inner diameter: φ286.0±1.5 ■ Bottom outer diameter: φ276.0±1.5 ■ Bottom inner diameter: φ272.0±1.5 ■ Material thickness: SPTFS 0.34t *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Roller Bucket SX" handled by Kōshō Sangyō Co., Ltd. It features a double handle for stable transportation without rotation, allowing you to efficiently saturate the entire roller with paint. Please feel free to consult us if you have any requests. 【Specifications】 ■ Material: Polypropylene ■ Capacity: 4L ■ Size: W240×H140×D200mm * For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "TS Poly Cover" handled by Kōshō Sangyō Co., Ltd. The material is polypropylene. It keeps the bucket itself clean and makes cleanup easy. It can be used when applying paint with a brush or roller. Please feel free to consult us if you have any requests. 【Compatible Buckets】 ■ For 3L: 2.5L, 3L poly buckets, stepped press cans ■ For 4L: 4L poly buckets *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables

We would like to introduce the A&D digital scales 'SH series' handled by Koshou Sangyo Co., Ltd. It features a portable design with a handle and is equipped with an auto power-off function. Additionally, we also offer the A&D digital scales 'SL series' with a large LCD display (25mm character height) and a splash-proof body. 【SH Series Features】 ■ Portable design with a handle ■ Auto power-off function ■ Tare function ■ Dual power supply (battery and AC adapter) ■ Easy-to-read large LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce the "Yamato Top Plate Scale" handled by Kōshō Sangyō Co., Ltd. We offer a lineup that includes both a completed bestseller model and a large scale type that is easy to measure larger items. For the scale cover, we have two types available: a lightweight and shatter-resistant plastic surface, and a glass surface that is easy to clean and easy to read. 【Lineup】 ■SD-5 ■SD-10 ■SD-20 ■SDX-30 *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

We would like to introduce the "erasable chalk" handled by Kōshō Sangyō Co., Ltd. It features dirt prevention, a hole for a fall prevention wire, and is resistant to melting even at high temperatures. Additionally, it can be written on surfaces with moisture and will not disappear with a small amount of rain or water. Please feel free to consult us if you have any requests. 【Features】 ■ Can be written on surfaces with moisture ■ Does not disappear with a small amount of rain or water ■ Resistant to melting even at high temperatures (heat resistance up to 65°C) ■ Comes with a hole for a fall prevention wire ■ Equipped with dirt prevention features *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Hataya Shintiger Reel ST-30KS," handled by Kōshō Sangyō Co., Ltd. It detects abnormal temperature rise in the electrical wires and stops the power supply to the outlet. It also prevents dust and debris from entering the outlet. Additionally, we offer the "Hataya Santiger Reel BG-301KXS," which comes standard with an overload leakage circuit breaker. 【Features of Hataya Shintiger Reel ST-30KS】 ■ Detects abnormal temperature rise in electrical wires and stops power supply to the outlet ■ Prevents dust and debris from entering the outlet ■ Earth pin slide type ■ Can be connected to 2P and 2P grounded outlets *For more details, please refer to the PDF document or feel free to contact us.

• Lighting outlet equipment

We would like to introduce the Vessel Electric Drill Ball '220USB-1' handled by Kōshō Sangyō Co., Ltd. The quick tightening is done with an electric motor, while the final tightening feels like using a manual screwdriver. It is equipped with a high-brightness LED light and a USB rechargeable Li-ion battery. Additionally, we also offer the '220USB-S1', which has a tightening speed four times that of this product. Please feel free to contact us if you have any requests. 【Features】 ■ Quick tightening with an electric motor, final tightening with a manual screwdriver feel ■ Tightening torque: 2N·m, no-load rotation speed: 280 RPM ■ High-brightness LED light included ■ USB rechargeable Li-ion battery (3.6V-800mAh) included ■ Compatible with hexagonal bits with a side length of 6.35mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "HiKOKI Impact Driver WH36DC," handled by Kōshō Sangyō Co., Ltd. The tool automatically distinguishes between 36V and 18V batteries, allowing both to be used. It reduces bit wobble and is less prone to cam-out. Additionally, you can adjust the main unit's functions via Bluetooth from your smartphone. Please feel free to contact us if you have any inquiries. 【Features】 ■ Automatically distinguishes between 36V and 18V batteries for dual use ■ Reduces bit wobble and is less prone to cam-out ■ High-power 36V specification ■ Equipped with a 3-LED light ■ 4-mode tightening switch function for different applications ■ Allows adjustment of main unit functions via Bluetooth from a smartphone *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Shin-O Industrial Super Multi Bit," handled by Kōshō Sangyō Co., Ltd. No need to change bits for work on different perforation targets. Compatible electric motors include impact drivers, drill drivers, and electric drills. Please feel free to contact us if you have any requests. 【Features】 ■ Compatible electric motors: impact drivers, drill drivers, electric drills ■ Highly versatile and convenient multi-purpose bit ■ No need to change bits for work on different perforation targets *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Deltagon Bit SDS-Plus" handled by Koshou Sangyo Co., Ltd. The performance against rebar has been improved, allowing it to penetrate deck plates. Positioning performance has been enhanced, achieving hole drilling that is close to a perfect circle. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compatible electric motor: Lightweight hammer drill ■ Improved performance against rebar, allowing penetration of deck plates ■ Enhanced positioning performance, achieving hole drilling close to a perfect circle ■ Reduced outer diameter wear and less impact from drilling *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

We would like to introduce "TS Mesh Adhesive SP," handled by Kōshō Sangyō Co., Ltd. With a mesh structure woven by intertwining the weft and warp threads, it achieves excellent adhesive strength even without a separator. It is a domestically produced, high-quality original product offered at a low price. 【Features】 ■ Flexible texture that easily adapts to the unevenness of the substrate ■ Thin specification with flat-processed weft threads ■ Strong glass fiber composition ■ Minimal waste generation as there is no separator (release paper) *For more details, please refer to the PDF materials or feel free to contact us.

• Glass Decoration Materials

"TS Quick 9" is a fast-drying, one-component polyurethane-based sealing material developed for waterproof substrates. It significantly shortens the tack-free time compared to general polyurethane sealing materials, making it suitable for waterproof substrate treatment that requires fast drying. Additionally, we also offer "TS Quick 7," which is primarily composed of modified silicone polymer, and "TS Quick Dedicated Primer," which is suitable for substrates such as concrete and mortar. 【TS Quick 9 Properties and Performance (Excerpt)】 ■ Component: Polyurethane resin ■ Form: Colored paste ■ Specific gravity: 1.23±0.1 ■ Heating loss: 10–15% ■ Storage stability: 6 months *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Shot Plug" handled by Kōshō Sangyō Co., Ltd. This type allows you to break the plug and remove the injection port after the curing of the injection material. It can be used for injection waterproofing work on exterior walls and underground structures. Additionally, we also offer a "type with double check valves" that allows you to break the plug and remove the injection port before the injection material cures. 【Product Lineup (Excerpt)】 ■ Shot Plug ・540-47: φ6mm×45mm ・540-48: φ6mm×75mm ・540-44: φ8mm×70mm ■ Shot Plug (with double check valves) ・540-54: φ8mm×70mm ・540-50: φ8mm×80mm ・540-51: φ10mm×80mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "KG-330 I" handled by Takasho Sangyo Co., Ltd. It comes with an injection nozzle and replacement packing. It is suitable for high viscosity (cream-like to grease-like viscosity). Please feel free to contact us if you have any requests. 【Specifications】 ■ Capacity: 300ml ■ Cylinder diameter: φ60mm ■ Total length: 408mm ■ Discharge amount: 1.5ml ■ Maximum pressure: 25MPa ■ Weight: 1.41kg *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Work tools

The "Cutter Guide" features a pressure spring and allows for precise cuts. It has an all-aluminum body that is lightweight and durable, enabling cutting while standing on narrow scaffolding. It comes with a sliding blade and a scale, allowing for cutting in millimeter increments. Additionally, we offer the "Cutter Guide Two-Tone," made from colored anodized materials, featuring a blue and red body. 【Features】 ■ Dedicated cutter for caulking backup material ■ Freely cuts according to the joint width on site ■ Can cut while standing on narrow scaffolding ■ Lightweight and durable all-aluminum body ■ Incorporates a pressure spring ■ Equipped with a sliding blade and scale for millimeter precision cutting *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

We would like to introduce our product, the "Caulking Gun KS-55P/55LP/55K/55LK." The "KS-55P and KS-55LP" are lightweight models that are easy to maintain and use. They are equipped with a "P piston" that combines a resin piston with a fluororubber seal. On the other hand, the "KS-55K and KS-55LK" are high-end models focused on durability, featuring an aluminum piston combined with a fluororubber seal, known as the "K piston." Please feel free to contact us if you have any inquiries. 【Features of KS-55P and KS-55LP】 ■ Light extrusion ■ Handle rotates freely ■ Lightweight design ■ Standard product that is easy to maintain and use ■ Equipped with a "P piston" that combines a resin piston with a fluororubber seal *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Eryon Cap" handled by Kōshō Sangyō Co., Ltd. This is a dedicated cap for storing caulking materials, which can be used for the temporary storage of one-component sealing materials. Simply remove the nozzle from the cartridge, attach it to this product, and store it as is. When you use it again later and remove the nozzle, hardened sealant will remain on the product side. If there is still some left in the nozzle, you can simply insert the tip rod into the nozzle and push it out. Please feel free to contact us if you have any inquiries. 【Usage Instructions】 ■ Remove the nozzle from the cartridge and attach it to this product. ■ Attach this product to the cartridge body and store it as is. ■ When using it again, removing the nozzle will leave hardened sealant on the product side. ■ Even if some remains in the nozzle, you can insert the tip rod into the nozzle and push it out. ■ The nozzle can be attached to the body and used as is. *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Safety and consumables

We would like to introduce the "Tombow" products handled by Kōshō Sangyō Co., Ltd. These are waterproof products for plasterers, featuring a plate shape with a φ25mm round hole. The material consists of a zinc-coated steel plate for the plate and aluminum alloy for the pin. In addition, we also offer "aluminum pins" for interior work and "aluminum one-touch pins" with adhesive for interior work. 【Features】 ■ Waterproof and for plasterers ■ Plate shape with a φ25mm round hole ■ Pin size is 0.8φ×25mm ■ Installation guideline is to install in a staggered pattern at intervals of 15 to 20 cm ■ Plate material is zinc-coated steel plate, and pin material is aluminum alloy *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Subsidiary materials

We would like to introduce the "All Plug SPS" that we handle. It is suitable for concrete and mortar substrates. Simply insert it into the pre-drilled hole and use a hammer to drive in the screw for secure fastening, and it can also be removed with a Phillips screwdriver. The sleeve material is nylon, and we offer standard steel screws as well as highly corrosion-resistant stainless steel screws. 【Features】 ■ Hammer-driven for stable fixation ■ Insert into the pre-drilled hole and drive in the screw with a hammer for secure fastening ■ Can be removed with a Phillips screwdriver ■ Nylon plug + flat head screws - Standard steel screws - Highly corrosion-resistant stainless steel screws *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Subsidiary materials

We would like to introduce the 'TS Strainer Vertical PVC-15T/11TD' that we handle. The "PVC-15T" features a higher design quality considering texture. It allows for smooth drainage without being obstructed by foreign objects, and has a functional and practical mountain-shaped design. Additionally, the "PVC-11TD" has a low height and a discreet slim design, making it a product that is less likely to shift from the center of the drainage pipe due to its two stainless steel grips. 【Features of PVC-15T】 ■ Made of hard PVC with excellent water resistance, weather resistance, heat resistance, and chemical resistance ■ Functional and practical mountain-shaped design ■ Smooth drainage without obstruction from foreign objects ■ Higher design quality considering texture ■ Easy installation with stainless steel grips ■ Compatible drain inner diameter (recommended) 60–110mm *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce the "TS PVC Ventilation Tube" handled by Kōshō Sangyō Co., Ltd. This ventilation tube is specially designed for PVC sheet waterproofing methods, featuring a composite structure of stainless steel and PVC. The base has a space that allows for excellent air collection efficiency. It comes with a patch template, making it an easy-to-use product for installation. Please feel free to contact us when you need it. 【Features】 ■ Specially designed for PVC sheet waterproofing methods ■ Composite structure of stainless steel and PVC ■ Base has a space for good air collection efficiency ■ Comes with a patch template for excellent workability ■ Includes 4 sets of fixing anchors *For more details, please refer to the PDF materials or feel free to contact us.

• Subsidiary materials
• others

We would like to introduce our "TS Stainless Steel Degassing Cylinder." Made entirely of stainless steel, it features excellent durability and a simple, robust structure. It is characterized by a beautiful mirror finish and comes with four anchor screws for fixing. We offer both square and dome types, with the dome type having a space in the base for improved gas collection efficiency. 【Features】 - Made of SUS-304 all stainless steel - Simple and sturdy construction - Excellent durability - Beautiful mirror finish - Dome type has a space in the base for improved gas collection efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

The "TS-B Rubber Drain Horizontal Type" is made of EPDM material and features a PVC duct with a flexible hose. It is a purely domestically produced product that excels in workability, weather resistance, heat aging resistance, and chemical resistance. It can be used for waterproofing renovation work with rubber sheets. Please feel free to contact us when you need assistance. 【Features】 ■ Purely domestically produced product ■ EPDM base + flexible hose PVC duct ■ Excellent performance in workability, weather resistance, heat aging resistance, and chemical resistance ■ Base thickness is 1.5mm ■ Hose length is 60cm *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof tape, adhesive, drain, protective panel
• Waterproofing work

We would like to introduce the "FRP Drain Horizontal Type" handled by Kōshō Sangyō Co., Ltd. Made of FRP, it is strong and has good adhesive properties. The body shape is available in round and square types, with an outer diameter of the drainage terminal of φ70mm or φ55mm. Please feel free to contact us when you need assistance. 【Features】 ■ Made of FRP, it is strong ■ Good adhesive properties ■ Available in round and square body shapes * For more details, please refer to the PDF document or feel free to contact us.

• Waterproof tape, adhesive, drain, protective panel

The "Fire Torch Burner" we handle allows for switching between flame injection and pilot light standby using a grip lever. It is lightweight, has a good weight balance, and is extremely easy to handle. When you release the lever, it enters standby mode with a pilot light, and it comes with a stand that allows it to be placed directly on the floor. Additionally, we offer a lightweight and easy-to-hold "Fire Torch Burner Dedicated Case" and "Fire Torch Burner Replacement Parts." 【Features】 ■ Complies with Euro standards ■ Adjustable propane burner ■ Switches between flame injection and pilot light standby with the grip lever ■ Enters standby mode with a pilot light when the lever is released ■ Comes with a stand that allows it to be placed directly on the floor *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Subsidiary materials

The "Custom Cutter" is a product that enables safe, high-quality, and speedy cutting operations without the need for a ruler or cutting mat. Simply insert the blade into the sheet and pull it along the wall for a straightforward operation. It is also possible to cut the sheet using only the cutter body. It features a compact and symmetrical design that can be used regardless of left or right orientation, and the guide fixture allows for fine adjustments on one side. 【Features】 ■ No ruler or cutting mat required ■ Cuts PVC waterproof sheets at wall edges at super high speed ■ Simple operation by inserting the blade into the sheet and pulling it along the wall ■ Achieves safe, high-quality, and speedy cutting operations ■ Specially shaped blade does not damage the substrate sheet *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "TS Easy-Lazy Series" is a product that allows for a wide range of work applications through various combinations of handles and options. We offer the "TS Easy Spare," which features a dry wiper specification, and the "TS Lazy Plate," which allows for easy swapping between two types of plates. Additionally, the "TS Easy-Lazy Common Handle" provides a stable three-point attachment, allowing for quick and easy detachment. 【Features】 ■ TS Easy Spare - Dry wiper specification that allows for easy swapping between three types of spares - Made of neoprene rubber (sponge type) ■ TS Lazy Plate - Rake specification that allows for easy swapping between two types of plates - When using the rake to apply coating material, the amount applied will vary according to the size of the waves *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Work tools

We would like to introduce our "TS Rubber Rake." The material is CR rubber, and the rubber hardness is 90°. The coating material can be applied in thicknesses according to the size of the waves. We offer a large wave set, a small wave set, and a flat type set. The flat type provides a feel similar to that of a rubber squeegee. Please feel free to contact us when you need assistance. 【Features】 ■ Coating material can be applied in thicknesses according to the size of the waves ■ Large wave set, small wave set, and flat type set available ■ The flat type provides a feel similar to that of a rubber squeegee ■ Dry wiper handles can be used as substitutes *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Work tools

The "TS Bottle Brush NEO" is a product that improves durability and workability by changing the nozzle part to a lightweight and sturdy aluminum material. The brush part is diagonally cut towards the tip, allowing it to fit perfectly into the angles (gaps) of the application surface. Additionally, the container is a carefully selected pure domestic product that makes it easy to dispense adhesives and other materials, and we offer three different capacities to choose from based on the application situation. 【Features】 ■ Full model change of the TS Bottle Brush ■ Manufactured in our own domestic factory ■ The container is a carefully selected pure domestic product that makes it easy to dispense adhesives and other materials ■ Three different capacities available to choose from based on the application situation (180ml, 300ml, 400ml) *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Work tools

We would like to introduce the "TS White Pig Bristle Brush" handled by Kōshō Sangyō Co., Ltd. It is suitable for solvent-based resin paints, urethane resins, epoxy resins, etc. The thickness is 10mm, and the applicable viscosity is low to medium. The quantity is 12 pieces, and you can choose from sizes 50mm, 75mm, and 100mm. Please feel free to contact us when you need to place an order. 【Features】 ■ Suitable for solvent-based resin paints, urethane resins, epoxy resins, etc. ■ Bristle type: White pig bristle ■ Thickness: 10mm ■ Applicable viscosity: Low to medium *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Work tools

We would like to introduce the 'TS Universal Brush' handled by Kōshō Sangyō Co., Ltd. This popular product is made with durable and elastic white pig bristles, suitable for a wide range of applications. It is compatible with solvent-based resin paints, urethane resins, and epoxy resins. The applicable viscosity ranges from low to medium, and we offer a variety of sizes: 30mm, 50mm, 70mm, and 85mm. Please feel free to contact us when you need to place an order. 【Features】 ■ Made with durable and elastic white pig bristles ■ A popular product suitable for a wide range of applications ■ Compatible with solvent-based resin paints, urethane resins, and epoxy resins ■ Available in a variety of sizes: 30mm, 50mm, 70mm, and 85mm *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Work tools

We would like to introduce the "Small Roller Violet Medium Pile" handled by Kōshō Sangyō Co., Ltd. It is suitable for general and multi-purpose use, made of acrylic and wool. The pile height is 13mm, and the outer diameter of the core is either φ22mm or φ16mm. We offer a wide range of sizes, including 25mm, 50mm, 175mm, and 225mm, so please feel free to contact us. 【Specifications】 ■ Material: Acrylic + Wool ■ Type: Medium Pile ■ Pile Height: 13mm ■ Outer Diameter of Core: 1・2 inches φ22mm, 4・6・7・9 inches φ16mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

We would like to introduce the "Small Roller Premium Pinky Medium Hair" handled by Kōshō Sangyō Co., Ltd. It is of high quality, with excellent hair texture and finish. The material is polyester, with a hair length of 13mm and an outer diameter of the core of φ16mm. The quantity is 50 pieces per box, and sizes available are 100mm and 150mm. Please feel free to contact us when placing an order. 【Features】 ■ General-purpose and versatile ■ High quality ■ Excellent hair texture and finish ■ Available sizes: 100mm and 150mm *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials