日本ノイズコントロール List of Products and Services

Nihon Noise Control Co., Ltd. handles glass wool products such as 'air outlet boxes' and 'branch boxes.' We manufacture according to your required sizes, including "anemone type" with airflow adjustment dampers, "line type" that can be divided based on the length of the installation device, and "branch type" that is easy to install with a single suspension. We can also accommodate short delivery times and respond flexibly and quickly. [Features] ■ Airflow adjustment damper included (anemone type) ■ Easy installation with single suspension (anemone type, register type, branch type) ■ Divisible based on the length of the installation device (line type) ■ Outlet section with PE foam insulation available (register type, line type) *For more details, please refer to the PDF document or feel free to contact us.

• Piping Equipment

The "PAC・FCU indoor unit SA chamber" is a compact and aesthetically pleasing product that is lightweight due to its glass wool board construction. It features insulation with a polyolefin foam (PEF) at the equipment connection point, eliminating the need for insulation repair after installation. We design according to your specifications and can flexibly and swiftly accommodate products from all manufacturers, both domestically and internationally. 【Features】 ■ Compact and visually appealing ■ Lightweight due to glass wool board construction ■ Insulated with polyolefin foam at the equipment connection point ■ No need for insulation repair after installation ■ Compatible with products from all manufacturers, both domestically and internationally *For more details, please refer to the PDF materials or feel free to contact us.

• Piping and insulation

The "ELB type" is an elbow silencer (muffler) that can be selected according to duct dimensions and required attenuation. Compared to conventional silencing elbows, it provides greater attenuation and has less airflow deflection in the curved section, allowing effective noise reduction even with a single silencer immediately after the machine room. If the inlet and outlet dimensions are different, please consult us for design. 【Features】 ■ Silencers can be selected according to duct dimensions and required attenuation ■ Suitable silencers can be chosen from many special specifications ■ Greater attenuation than conventional silencing elbows can be achieved ■ Low pressure loss and generated noise ■ Standard module dimensions available from 250 to 600mm in 50mm increments *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Equipment

This is a rectangular splitter silencer (muffler) that can be selected according to duct dimensions and required attenuation. Silencers with low pressure loss and appropriate performance can be selected by combining models and modules. The types of modules are available in increments of 50mm, ranging from 250mm to 600mm, based on module dimensions and gap dimensions. 【Features】 ■ Can be selected according to duct dimensions and required attenuation ■ Silencers with low pressure loss can be selected ■ Appropriate performance silencers can be selected by combining models and modules ■ Silencers suitable for various applications can be selected from many special specifications ■ Standard module dimensions are available in increments of 50mm, from 250mm to 600mm *For more details, please refer to the PDF document or feel free to contact us.

• Automatic Control Equipment

The "Shizuka S Type" is a noise reduction device for the discharge of outdoor units that is compatible with various manufacturers' products. It features a baked paint finish in the same color as the outdoor unit. Weighing approximately 38 kg, it can be installed directly on top of the equipment. There is also the "Shizuka SII Type," which has a low pressure loss of about 5 Pa or less. Additionally, this product only targets noise on the discharge side. If noise reduction on the intake side is necessary, using it in combination with the "Shizuka F Type (silencer hood)" or "Shizuka L Type (silencer louver)" is more effective. 【Features】 - Weight suitable for direct installation on top of the equipment (S Type approximately 38 kg) - Baked paint finish in the same color as the outdoor unit - Low pressure loss (S Type approximately 16 Pa, SII Type approximately 5 Pa or less) - Noise reduction performance can be produced at standard type approximately 10 dB, high-performance type approximately 15 dB or 20 dB - Compatible with various manufacturers' products both domestically and internationally *For more details, please refer to the PDF document or feel free to contact us.

• Soundproofing/Shielding Unit

We offer the PAC outdoor unit silencing device 'Shizuka (Type E and Type S)', which is suitable for noise reduction measures for PAC outdoor units. Type E features an elbow design to prevent short circuits. Connection flanges can be manufactured as an option. Type S weighs approximately 38 kg, making it easy to install directly on top of the equipment. It comes with a baked paint finish in the same color as the outdoor unit. 【Features】 ■ Low pressure loss (Type E approx. 35 Pa or less, Type S approx. 16 Pa, Type SII approx. 5 Pa or less) ■ Noise reduction performance: Standard type approx. 10 dB, high-performance types (approx. 15 dB and 20 dB) can be produced. *For more details, please download the PDF or feel free to contact us.

• Soundproofing/Shielding Unit