朝日塗工 List of Products and Services

We received a request from Ujiie Farm in Miyagi Prefecture and carried out construction work using the "water-based hard urethane mortar, smooth" method. First, we prepared the substrate by polishing the floor to ensure it was in good condition. This time, we divided the specifications for the construction area into water-based hard urethane mortar and smooth. At Asahi Niko in Kashiwa City, Chiba Prefecture, we can perform floor coating using various materials and methods, including urethane. If you are considering floor construction, please consult with Asahi Niko. We will guide you to the appropriate construction that meets your needs. [Case Overview] ■ Ujiie Farm, Miyagi Prefecture ■ Floor Coating Method: Water-based Hard Urethane Mortar, Smooth *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Tokai Pickles Moriya Factory located in Moriya City, and we carried out maintenance work using the "Eucolite UD200SR+RG" method. For the areas where the floor was partially peeling, we removed the old paint and then proceeded with the painting work. The Eucolite UD200SR used in this construction is a high-performance flooring material suitable for food factory floors that are exposed to hot water flow and radiant heat from kettles. Asahi Coating, located in Kashiwa City, Chiba Prefecture, has extensive experience with the Eucolite method. If you are considering flooring work for factories, warehouses, or stores, please feel free to consult us. [Case Overview] ■ Tokai Pickles Moriya Factory, Moriya City, Ibaraki Prefecture ■ Flooring Method: Eucolite UD200SR+RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from I’m Food Center in Adachi Ward and carried out construction work using the "Eucalite UD200SR method." First, we performed substrate treatment on the floor to prepare for painting. Once the floor condition was improved through this treatment, we proceeded with painting using Eucalite UD200SR. This method is excellent in heat and water resistance and is widely used in factory applications. Our company has extensive experience in the Eucalite method. If you are considering construction using the Eucalite method, please feel free to leave it to Asahi Coating located in Kashiwa City, Chiba Prefecture. We also welcome consultations. [Case Overview] ■ I’m Food Center, Adachi Ward, Tokyo ■ Flooring Method: Eucalite UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Nishikawa Ohara Factory in Isumi City and are conducting construction work on the baseboard using the "Eucolite RG Method." Since this involves the installation of baseboards, we checked the condition of the baseboards and found that several areas seemed to be peeling off. For this project, we used Eucolite RG, a corrosion-resistant material for vertical surfaces such as baseboards. We also applied an anti-mold edge seal treatment as a finishing touch. Asahi Coating, located in Kashiwa City, Chiba Prefecture, offers floor painting using the Eucolite method, which has excellent chemical resistance and impact resistance, making it suitable for factories and similar environments. If you are considering floor installation for factories, schools, stores, etc., please contact us. [Case Overview] ■ Nishikawa Ohara Factory, Isumi City, Chiba Prefecture ■ Floor Coating Method: Eucolite RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a certain food factory in Inba-gun, Chiba Prefecture, and conducted the "U-Crete MF wall painting." First, we checked the situation before construction and also carried out repairs on the drainage pit this time. We set up a tent-like protective covering and completely removed the old paint film (epoxy resin with a thickness of 10mm). A total of 12 tons of debris was generated from the removal. After completing the surface preparation, we will proceed with the painting using U-Crete MF. The U-Crete MF used this time can be finished smoothly, making it suitable for the food and distribution industries. [Case Overview] ■ Certain food factory in Inba-gun, Chiba Prefecture ■ Flooring method: U-Crete MF *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Iwatsuka Seika Co., Ltd. in Nagaoka City, and we carried out construction work using the "Eucleet MF/SR method." Before construction, we observed several areas that were dirty and peeling, so we performed surface preparation on the floor and removed the old paint. Once the condition of the floor was improved, we applied a primer, and for the sloped areas, we used Eucleet UD200SR to create the slope. The finishing material used, Master Top 1430, is a high-performance flooring material. One of its attractive features is its excellent adhesion performance, which integrates with the concrete, preventing peeling for a long time. 【Case Overview】 ■ Nagaoka City, Iwatsuka Seika Co., Ltd., Sawashimojo No. 2 Factory ■ Flooring Method: Eucleet MF/200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We carried out construction work using the "rigid urethane method" at the Dolmi Building in Nagaoka Castle, Nagaoka City, upon request. First, we applied an epoxy-based primer, followed by three coats of rigid urethane for the base coat, intermediate coat, and top coat. Our company has extensive experience in flooring construction, including the Euclide method. Please let us know your requests, such as "I want a floor that is difficult to peel" or "I want a floor that is resistant to chemicals and heat." We will provide a thorough explanation while introducing our past construction work. [Case Overview] ■ Dolmi Building, Nagaoka Castle, Nagaoka City, Niigata Prefecture ■ Flooring Method: Rigid Urethane *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Maniha Foods in Maebashi City and carried out construction work using the "Eucleet RG Method." As part of the surface preparation, we performed grinding and cutting, and prepared for painting. We protected the factory machinery, applied primer, and painted with Eucleet RG. Since the side gutter area of the factory requires painting on vertical surfaces, Eucleet RG, which is a corrosion-resistant material for vertical surfaces, is very suitable as a flooring material. Asahi Coating has extensive experience in painting using the Eucleet method. We can handle painting in various facilities such as factories, schools, and stations, so if you are considering it, please leave it to us. We also welcome consultations. 【Case Overview】 ■ Maniha Foods, Maebashi City, Gunma Prefecture ■ Flooring Method: Eucleet RG *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Kashima Rice Crackers Co., Ltd. located in Kashima City for construction work using the "Ucrete UD200SR method." First, we will perform surface preparation on the peeling paint, completely removing the old paint. We will then use a crack cutter. After that, we applied the Ucrete UD200SR completely down to the machinery. Asahi Coating in Kashiwa City, Chiba Prefecture has extensive experience in floor painting and serves a wide range of areas from the Kanto region, including Chiba, Saitama, and Ibaraki Prefectures, to Niigata and Gunma Prefectures. If you are considering our services, please feel free to contact us. We will leverage our experience to provide proposals that meet your needs. [Case Overview] ■ Kashima City, Kashima Rice Crackers ■ Floor Coating Method: Ucrete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Tokyo Fugu Honpo in Chiba City and carried out construction work using the "Eucleet MF, SR, and Rigid Urethane Method." Due to the use of three types of flooring materials, there was a large quantity of materials at the site. Additionally, we also performed drainage pipe installation and painting of the walls and ceiling. For this, we used water-resistant and mold-resistant paint. The Eucleet MF and SR used are recommended flooring materials for the food industry. [Case Overview] ■ Tokyo Fugu Honpo, Chiba City ■ Flooring Method: Eucleet MF, SR, Rigid Urethane *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We carried out construction work using the "Eucolite MF/SR method" at the headquarters factory of Abe Kou Seika in Ojiya City upon their request. As before, we started the work after protecting the machinery. There were cracks in the floor, so we addressed the cracks during the substrate preparation, and after that, we applied Eucolite MF and SR respectively. Asahi Coating in Kashiwa City, Chiba Prefecture, offers floor painting using the Eucolite method. The Eucolite method features excellent heat resistance, impact resistance, and mold resistance. We welcome inquiries and consultations, so please feel free to contact us. [Case Overview] ■ Ojiya City, Abe Kou Seika Headquarters Factory ■ Floor Coating Method: Eucolite MF/SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from the Fuji Oil Chiba Plant located in Chiba City and carried out the construction of the production area and filling room using the "Eucleet UD200SR method." We removed the old paint film through substrate treatment and carried out painting. This time, we also performed masking before painting, ensuring that the filling room was thoroughly sealed. Asahi Noko in Kashiwa City, Chiba Prefecture, specializes in the Eucleet method and can accommodate a wide range of areas, not only in Chiba Prefecture but also in Ibaraki, Saitama, Gunma, Niigata, Tochigi, and more. If you are looking for durable and high-performance flooring construction, please contact Asahi Noko. 【Case Overview】 ■ Chiba City, Fuji Oil Chiba Plant ■ Flooring Method: Eucleet UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

At the Abe Kou Seika Seimen Factory in Ojiya City, we carried out construction work using the "Ucrete UD200SR method." We implemented painting on the floor and the drainage channels. This flooring material has effects that suppress bacterial growth, high heat resistance, and many functions suitable for food factory environments. Asahi Coating in Kashiwa City, Chiba Prefecture, has extensive experience in flooring construction methods such as Ucrete. Please let us know your requests, such as "I want a floor that is difficult to peel" or "I want a floor that is resistant to chemicals and heat." We will propose construction that suits our customers' needs. [Case Overview] ■ Abe Kou Seika Seimen Factory, Ojiya City, Niigata Prefecture ■ Flooring method: Ucrete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

At Ippudo in Yokohama City (new construction), we carried out construction work using the "Euclea UD200SR method" with full anti-mold measures. PBM is a highly effective antibacterial and anti-mold agent that exhibits suppression and prevention effects against fungi (mold). Among them, the "PBM 0.5" used this time showed such effectiveness that in a culture experiment to investigate antibacterial effects, no bacteria grew even after 28 days of culture, equivalent to 3 to 5 years in real time. This method is recommended for customers troubled by mold. [Case Overview] ■ New construction at Ippudo, Yokohama City, Kanagawa Prefecture ■ Flooring method: Euclea UD200SR with full anti-mold measures *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a certain caviar manufacturing factory in Kawachi Town and carried out painting work using the "Ucrete UD200SR and hard polyurethane method." By removing the old paint film through surface preparation, we applied Ucrete UD200SR and hard polyurethane in different areas as needed. This flooring material has high chemical resistance and slip resistance, making it suitable for factory floors. Asahi Coating in Kashiwa City, Chiba Prefecture has a track record in various sites such as factories, schools, and restaurants, and can also respond to sites outside the Kanto region, so please feel free to consult with us. [Case Overview] ■ A certain caviar manufacturing factory in Kawachi Town, Ibaraki Prefecture ■ Flooring method: Ucrete UD200SR and hard polyurethane *For more details, please refer to the PDF materials or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a certain large-scale food factory in Chiba Prefecture to carry out repair work using the "Ucrete UD200SR, MF, and FL methods" at various locations. The "UD200SR" used this time is a flooring material that excels in heat resistance, cold resistance, and slip resistance. The "MF" is characterized by its excellent abrasion resistance, impact resistance, and chemical resistance, as well as its seamless smooth surface. The "FL" is used for floor repairs and substrate adjustments, making it an ideal flooring material for repairing concrete floors. Asahi Coating in Kashiwa City, Chiba Prefecture has extensive experience in flooring applications, including Ucrete methods. We also serve a wide area beyond the Kanto region, including Gunma, Niigata, and Shizuoka, so please feel free to contact us for inquiries. [Details of the work] ■ Flooring method: Various locations, repair work UD200SR, MF, FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

At the headquarters factory of Abe Kou Seika in Ojiya City, Niigata Prefecture, we conducted construction work using the "U-Crete UD200SR MF method." The main feature of the U-Crete used this time is its "long-term durability." The factory floor is subjected to very harsh conditions, such as moving equipment with wheels and high-temperature spills. U-Crete is excellent in impact resistance, heat resistance, and cold resistance, allowing for long-term use without damaging the floor, making it highly recommended for factory flooring. Asahi Coating in Kashiwa City, Chiba Prefecture has extensive experience in floor coating construction, including the U-Crete method. Please let us know your requests, such as "I want a durable floor." We will carefully explain while introducing our past construction work. [Details of the work] ■ Floor coating method: U-Crete UD200SR MF *For more details, please refer to the PDF materials or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Imaru Ikawa Shoten in Yaizu City, Shizuoka Prefecture, for new construction work, and we carried out the construction using the "U-Crete UD200SR・MF・DP method." This time, we used three different types of flooring materials to differentiate the flooring based on location. U-Crete is a high-performance flooring material that can withstand harsh usage conditions. It possesses many features, including durability, heat resistance, cold resistance, chemical resistance, and hygiene, making it suitable for various environments such as food factories, pharmaceuticals, and chemical plants. Asahi Coating in Kashiwa City, Chiba Prefecture, offers flooring construction services. If you have any concerns about flooring, please feel free to contact us. 【Details of the Work】 ■ Flooring Method: U-Crete UD200SR・MF・DP *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Kodama Factory No. 3 located in Ota Ward, Tokyo, to carry out floor coating and new drainage construction using the "Eucleet UD200SR method." This time, we implemented the construction using the floor material "Eucleet UD200SR," which excels in heat resistance and chemical resistance. We also conducted the new drainage construction, ensuring careful work even within the drainage area. Our company has extensive experience in various construction methods, including the Eucleet method, rigid urethane, and epoxy thick coating. We cater to a wide range of sites, including factories, stores, schools, and public institutions. Please feel free to consult us. [Details of the work] ■ Floor coating method: Eucleet UD200SR; new drainage installation *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a certain large-scale food factory located in Chiba Prefecture, and we carried out floor coating work using the "U-Crete UD200SR method." Since there are facilities within the factory, we took precautions and implemented dust control measures before proceeding with the substrate preparation work. The areas removed during the substrate preparation were backfilled with a base coat. After that, we applied the "U-Crete UD200SR," and for the vertical surfaces, we used "U-Crete RG" for coating. The U-Crete method used this time is popular among food factories due to its excellent heat resistance, hygiene, and durability. Our company has extensive experience with the U-Crete method, so if you are considering it, please feel free to consult us. [Details of the work] ■ Floor coating method: U-Crete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Matsuoka Suisan's headquarters factory in Choshi City, Chiba Prefecture, to carry out floor coating with color differentiation for various new construction methods. We carefully performed the substrate preparation, and for this project, we created a paint allowance by lowering the edges of the grating (drain cover) using a grinder. By establishing a proper paint allowance, the coated floor becomes more resistant to peeling and lasts longer. The flooring material used this time, Euclite, comes in six colors: "Red, Yellow, Gray, Green, Light Green, and Cream," allowing for color differentiation by area. If you have any requests regarding floor coating work, such as "The floor is peeling, and I want to have it done quickly," please feel free to contact us. [Details of the work] ■ Floor coating method: New construction various methods color differentiation *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Abe Kou Seika's 8th factory located in Ojiya City, Niigata Prefecture, to carry out floor coating work. This time, we used "U-Crete UD200SR" for the floor area and "U-Crete MF" for the drainage channel. This method features a water-based rigid urethane as the main material, which is characterized by its low odor, high adhesion to concrete, and resistance to peeling. At Asahi Coating in Kashiwa City, Chiba Prefecture, we have achieved low-cost and high-quality floor coating work by having all work done in-house by experienced craftsmen. We also conduct inspections and aftercare following handover, so you can feel assured. If you have any concerns regarding U-Crete methods or floor coating work, please feel free to consult us. [Details of the work] ■ Floor coating method: U-Crete UD200SR & drainage channel MF *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Kyodo Dairy's Chiba Factory in Funabashi City, Chiba Prefecture, and carried out floor repair work. This time, we repaired the damaged areas of the concrete floor using "Eucolite FL." Eucolite FL is a flooring material suitable for floor repairs and substrate adjustments, making it ideal for repairing cracks and damaged areas in concrete. As a dust control measure, we took precautions to protect the equipment during the construction. At Asahi Coating in Kashiwa City, Chiba Prefecture, we carefully carry out each request, regardless of size, from large-scale floor coating projects for entire facilities to repairs of damaged areas. Please feel free to consult us regarding floor coating work. [Details of the work] ■ Floor coating method: Eucolite FL *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from a certain large-scale food factory located in Chiba Prefecture, and we carried out floor coating using the "U-Crete MF 6mm specification." As a dust control measure, we set up a complete tent for protection before starting the substrate treatment. We made cuts in areas where there were cracks. Additionally, since we will be working not only on the floor but also on the drainage pits, we performed surface preparation by scraping. The heat resistance and cold resistance temperatures vary depending on the thickness, so we would like to discuss what thickness would be appropriate based on the usage conditions. If you are looking for a contractor for U-Crete construction, please leave it to Asahi Coating in Kashiwa City, Chiba Prefecture. We handle a wide range of projects from residential work to large-scale factories. [Details of the work] ■ Floor coating method: U-Crete MF 6mm specification *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We conducted a flooring installation using the "Ucrete MF method" at a Lotus dealer located in Chiba City, Chiba Prefecture. We performed substrate preparation through diamond polishing and completely removed the old coating before proceeding with the installation. Due to the occurrence of bubbles this time, we applied a sealing coat using a sealing material. The "Ucrete MF" used is a flooring material suitable for workspaces, corridors, and loading areas that require durability with a focus on abrasion resistance and impact resistance. Our company has numerous construction achievements using various methods, including the Ucrete method. If you have any concerns or requests regarding flooring construction, such as "I want a floor with high heat resistance" or "I want a floor that considers slip resistance," please feel free to contact us. [Details of the work] ■ Flooring method: Ucrete MF *For more details, please refer to the PDF materials or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case of U-Crete installation in the food factory industry. It was a food factory where work was conducted while water was flowing. It seems that forklifts also frequently operated in the area. As we progressed with removing the old coating, we found areas where water had penetrated beneath the concrete layer. We made sure not to overlook this and focused on thorough substrate preparation. Using "U-Crete UD200SR," we finished the junction with the baseboard at approximately 5mm thickness with RG. I believe that the key point of floor coating lies in substrate preparation, and we take pride in our high repeat rate. *For more details, please refer to the PDF materials or feel free to contact us.*

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce a case of floor renovation at an automobile maintenance factory in Chiba City. Since its establishment, the floor had been used with a concrete surface, causing brake oil and other grease to accumulate on the surface along with dust, making polishing very difficult. The surface was also quite uneven, so we performed partial patching to achieve a smoother finish. After the first application, we conducted partial polishing to ensure smoothness. Since the sealing was not yet complete, we proceeded to the second scratch coat, and finally applied the finishing coat of "Eucolite MF." We applied 4 to 5 kg per square meter using a trowel to achieve a smooth finish. The result is a finish that is remarkably beautiful, far beyond what one could imagine from the condition before the work. *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce examples of construction at industrial waste treatment facilities and facilities for processing empty cans of juice and coffee. Since a large amount of sugar is used in beverages, the acid from it deteriorates the concrete. Because concrete is alkaline, it becomes weakened and its structure is destroyed when it becomes acidic. First, we neutralize it by bringing it closer to alkaline using caustic soda before moving on to the substrate treatment. I remember that grinding and polishing removed about 10 to 30 mm. The "Euclea FL" used this time is a flooring material that can be applied up to 100 mm thick. All the painting work was done manually, and the total amount of materials exceeded 8 tons. It has been three and a half years since we undertook the construction, and it is still being used without any damage. We have also received repeat requests for construction since then. *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce the flow from your request for Euclid flooring installation to the completion of the work. First, we will visit you in person to hear more specifically about any concerns you may have. To alleviate your anxieties and dissatisfaction, we will also make suggestions from our side and continue to consult with you until your issues are resolved. Next, based on the content of the current situation survey, we will propose a plan that is truly necessary for you. We will provide a detailed estimate of the costs required for that plan. We will proceed with the actual installation at a time that is convenient for you, taking sufficient care to consider surrounding buildings and machinery during the construction. As soon as the installation is complete, our staff will conduct a thorough inspection. If any issues are discovered, we will report them and respond immediately. After the construction is finished, we will ask you to confirm that there are no defects, and if everything is satisfactory, we will remove the scaffolding and protective coverings and hand over the project. *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

The "oxygen index" represents the minimum concentration of oxygen in a mixture of oxygen and nitrogen that can sustain the combustion of a material. The determination of non-combustibility and flame retardancy is made according to the oxygen index method specified in JIS K 7201, with materials having an oxygen index of 26 or higher treated as non-combustible or flame-retardant. In such cases, they are not subject to the Fire Service Act (designated combustible materials), so there is no need to notify the local fire department even when storing or handling more than 20m³ (as per the Fire and Disaster Management Agency notification). *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We would like to introduce the Euclite flooring system manufactured by BASF Japan. "Euclite UD200SR" is a high-performance flooring material primarily composed of water-based rigid polyurethane, suitable for areas that are constantly wet, such as floors in food industry production lines where hot water flows, as well as kitchens and areas exposed to radiant heat, such as under kettles, with a slip-resistant finish. Additionally, we offer "Euclite MF," which is suitable for seamless smooth finishes in the food and distribution industries, and "Euclite RG," among others. 【Euclite UD200SR Specifications】 ■ Material: Water-based rigid polyurethane ■ Form: 4 components ■ Method: Slip-resistant (mortar method) ■ Standard installation thickness: 6mm to 9mm ■ Standard number of coats: 1 coat (finish coat) *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

The "Euclyte PBM Anti-Mold Specification" is a groundbreaking method that adds PBM to Euclyte flooring materials. By adding PBM, we can achieve very high anti-mold and antibacterial effects. We offer two types: "Euclyte PBM0.3" and "Euclyte PBM0.5." You can view experimental data on the level of antibacterial effects achieved, as well as results from accelerated tests conducted in conditions conducive to mold growth, through the related links. *For more details, please refer to the PDF materials or feel free to contact us.*

• Plastering and painting work
• Special flooring/indoor
• Special Construction Method

"PBM (Pacific Beam Mold)" is a groundbreaking antibacterial and antifungal agent developed in Japan. It has a very strong antibacterial effect and demonstrates suppression and prevention effects even against fungi (molds) that have been difficult to address until now. Due to its non-leaching nature, the effects last for a long time, and through its repellent effect and unique composite technology, it has achieved a broad spectrum of over 2,000 types, including about 60 types of mold commonly found in general buildings. This represents a world-class level of effectiveness. [Features] ■ Very strong antibacterial effect ■ Demonstrates suppression and prevention effects against fungi (molds) ■ Long-lasting effects due to its non-leaching nature ■ Achieves a broad spectrum of over 2,000 types, including about 60 types of mold commonly found in general buildings, through its repellent effect and unique composite technology *For more details, please refer to the PDF materials or feel free to contact us.

• Anti-rot, anti-termite, anti-mold material
• Special Construction Method
• Special flooring/indoor

The "Euclide Method" uses water-based rigid urethane as its main material, which excels in heat resistance, impact resistance, mold resistance, and chemical resistance. It is a highly safe flooring material equivalent to the non-regulated F☆☆☆☆ category in terms of formaldehyde emission. It has a low possibility of mold growth and bacterial proliferation, making it suitable for flooring in food and beverage industries as well as pharmaceutical factories. Additionally, it is appropriate for areas that require steam cleaning and for floors that become wet and slippery. 【Features】 - Excellent heat resistance, impact resistance, mold resistance, and chemical resistance - Formaldehyde emission category: equivalent to non-regulated F☆☆☆☆ - Low possibility of mold growth and bacterial proliferation - High adhesion to concrete - Low odor due to the main component being water-based rigid urethane *For more details, please refer to the PDF document or feel free to contact us.

• Special Construction Method
• Special flooring/indoor

We would like to introduce a flooring installation example by Asahi Coating for the seafood industry. The seafood industry often involves working with flowing water, making it difficult to keep the floor dry, which leads to a high risk of mold growth. Additionally, due to the high salt content, salt damage is also likely to occur. To address this, we adopted the "Eucleet Method," which is highly resistant to chemicals and can withstand the harsh working conditions of the seafood industry. While our standard method also offers excellent chemical resistance and helps suppress mold growth, we have an option to add a mold inhibitor for particularly poor usage conditions. **Results** - Adopted in seafood-related environments with no windows and poor ventilation, there has been no sign of mold growth even after about four years. - Regarding salt damage, areas with bare concrete deteriorated quickly, but after the Eucleet installation, there have been no issues at all. **Image Descriptions** 1st image: Newly constructed soup factory in the ramen industry. 2nd image: Indoor fish processing facility with no windows at all. *For more details, please refer to the PDF document or feel free to contact us.*

• Premixed mortar
• Renovation and repair methods

We would like to introduce a flooring installation example by Asahi Coating for the food manufacturing industry. The customer was concerned that areas with high-temperature water flow and heavy forklift traffic would damage the floor in a short period of time. Since they were using high-temperature high-pressure washing for cleaning at the end of each day, we finished the flooring with the 'Ucrete UD200SR' 9mm method as a countermeasure. The actual flowing water is around 80°C, but the heat resistance temperature is 120°C. 【Case Summary (Partial)】 <Challenges> ■ Areas with high-temperature water flow and heavy forklift traffic tend to damage the floor quickly. <Results> ■ There are no abnormalities despite washing with a high-temperature high-pressure washer. ■ Frequent forklift operations show no issues. 【Image Descriptions】 1st Image: Operations with hot water spilling. 2nd Image: Water has penetrated under the existing floor coating, resulting in a severely damaged condition. *For more details, please refer to the related links or feel free to contact us.

• Premixed mortar
• Renovation and repair methods

The "Euclide UD200SR" is a mortar method that demonstrates excellent functionality in areas exposed to radiant heat and hot water, as well as on floors that are constantly wet. It combines heat resistance and slip resistance, suppressing the growth of mold and bacteria, while also being resistant to the chemicals and disinfectants used for cleaning. Additionally, it allows for high-pressure steam cleaning, ensuring constant hygiene. 【Main Features】 ■ Slip resistance ■ Heat resistance ■ Impact resistance ■ Abrasion resistance ■ Chemical resistance ■ Mold resistance *For more details, please refer to the PDF document or feel free to contact us.

• Premixed mortar
• Renovation and repair methods

"New Coat" is a titanium dioxide photocatalytic coating with apatite covering, suitable for deodorization, stain prevention, antibacterial properties, and sick house measures. For interior use, areas that cannot be coated are protected during application. The curing time after application is about 1 hour, and there is no need to move furniture. For exterior use, scaffolding is generally set up for high work, and masking is done because special materials are applied separately to windows, tiles, etc. Estimates are free, so please feel free to contact us. 【Features】 ■ Environmentally friendly purification technology ■ Suitable for sick house measures ■ Eliminates tobacco and ammonia odors ■ Excellent stain prevention effect on the application surface ■ Keeps the building's appearance beautiful *For more details, please refer to the related links or feel free to contact us.

• paint
• Photocatalysts and various wall materials (exterior and interior walls, etc.)

The "Apatite-coated Titanium Dioxide Photocatalyst" has made it possible to coat "apatite," a substance known to be a component of tooth enamel, around titanium dioxide, allowing for a single coat application. The substance adsorption properties of "apatite" adsorb bacteria, viruses, nitrogen oxides, and aldehydes even at night, and titanium dioxide chemically decomposes them with sunlight. This is the feature of "nu-coat AP: New Coat." Since apatite is coated on titanium dioxide, it performs environmental purification work both day and night, demonstrating superior catalytic efficiency compared to standalone titanium oxide. 【Features】 ■ Decomposes the causes of sick house syndrome ■ Decomposes the smell and yellowing of tobacco ■ Antibacterial against most bacteria ■ Longer repainting intervals contribute to economic and environmental benefits ■ Dirt on exterior walls washes away with rainwater *For more details, please refer to the related links or feel free to contact us.

• paint
• Photocatalysts and various wall materials (exterior and interior walls, etc.)

Our company has gained strong trust and numerous achievements from local customers by providing high-quality construction services with our extensive expertise and skills over many years. While we primarily focus on exterior wall painting, we also handle renovations, and we are particularly renowned for our high level of skill in repainting buildings and color coordination. If you are looking for an exterior wall painting contractor in Kashiwa, please leave it to us, as we offer painting services that take your lifestyle into consideration. 【Features】 ■ Highly rated for quality painting, especially among local customers ■ Achieving customer satisfaction through attentive service ■ Providing construction services that consider the customer's lifestyle ■ Proposing suitable renovation plans that prioritize the customer's lifestyle ■ Sharing information through a blog managed by our staff *For more details, please refer to the related links or feel free to contact us.

• Plastering and painting work

Our company, which operates as an exterior wall painting contractor in Kashiwa, provides high-quality painting services that ensure a high level of satisfaction for the price. The painting we offer not only involves quality workmanship utilizing specialized knowledge and high skills but also includes color suggestions tailored to our customers' lifestyles. If you are considering using an exterior wall painting contractor in Kashiwa and would like to know the condition of your exterior walls, our staff conducts free assessments to provide you with insights, so please take advantage of this service. **Features** - We accept inquiries regarding exterior wall concerns at any time. - We use high-quality Japanese paint for our projects. - Our renovation plans are tailored to prioritize our customers' lifestyles. - We provide highly reputable exterior wall painting and renovation services in Kashiwa. - We regularly update our blog with the latest information about our company. *For more details, please refer to the related links or feel free to contact us.*

• Plastering and painting work

The "Eucleet method" is a flooring construction method that uses high-safety flooring materials with excellent heat resistance, impact resistance, mold resistance, and chemical resistance, equivalent to formaldehyde emission grade F☆☆☆☆. It has a low possibility of mold growth and bacterial proliferation, making it suitable for a wide range of needs, including food factories, beverage and pharmaceutical factories, and floors that experience impact. Our company carefully performs substrate treatment during construction to maximize the strengths of Eucleet. We can flexibly accommodate projects of any scale. 【Features of Eucleet】 ■ Proposals for high-performance flooring materials tailored to needs are welcome ■ Can be applied in areas subjected to hot water sterilization or steam cleaning ■ Low odor due to the main component being water-based rigid urethane ■ Excellent adhesion to concrete ★ Currently, we are offering a collection of over 50 case studies, approximately 120 pages long. You can view it via "PDF download." Please feel free to contact us with any inquiries.

• paint

Do you have any of these concerns? - I want a floor that is resistant to dirt and organic acids. - I am looking for a company that considers slip resistance in floor installation. - I cannot afford a long construction period for floor renovation. - I want to request a floor installation with high heat resistance. - The floor coating peels off immediately. In this collection of construction achievements, we present 39 case studies with actual construction photos for customers in manufacturing, food factories, livestock farms, meal centers, restaurants, and school facilities who are "struggling with floor issues." *For more details, please download the PDF or contact us if you would like more information.

• Plastering and painting work
• Special Construction Method

We received a request from the Fuji Oil Chiba Factory in Chiba City, Chiba Prefecture. This time, we are working with the "U-Crete UD200SR + Line" method. We carefully applied the flooring to ensure there are no inconsistencies in quality, resulting in a beautiful finish. U-Crete UD200SR is a high-performance flooring material that uses water-based rigid polyurethane, excelling in chemical resistance, slip resistance, and performance under extreme temperatures. Additionally, its seamless and smooth finish makes cleaning easy, which is another feature. Asahi Coatings is confident in our flooring application using the "U-Crete UD200SR + Line." Customers considering flooring for various factories, such as food and chemical plants, are welcome to consult with Asahi Coatings. [Details of the work] ■ Flooring method: U-Crete UD200SR + Line method *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor

We received a request from Fujiseiyu Chiba Factory located in Chiba City, Chiba Prefecture, and we carried out construction work using the "Ucrete UD200SR" method. First, we prepared the surface by polishing the floor to ensure its condition. Next, we applied paint to the areas that were different in color before proceeding to coat the entire floor with the method. The Ucrete method has a low possibility of mold growth and bacterial proliferation, making it very effective in terms of hygiene. Asahi Noko, located in Kashiwa City, Chiba Prefecture, has numerous achievements in Ucrete method and floor coating construction. If you are considering floor construction for factories or facilities, please feel free to contact Asahi Noko. 【Details of the work】 ■ Floor coating method: Ucrete UD200SR *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work
• Special Construction Method
• Special flooring/indoor