東陽建設工機 List of Products and Services

- Coil wire specialized machine - Ideal for processing circular spiral rebar, essential for seismic reinforcement construction - Made-to-order production machine

• others

- Ribbed, lattice, and bent bar: a rebar bending machine that serves three purposes in one unit - Simultaneous bending at two locations in one process - Accommodates various processing dimensions such as long tread and low riser for stairs - Comes with a product receiving table (foldable)

• others

- Ideal for drop lid type U-shaped drainage mesh reinforcement - Automatic supply, automatic processing

• others

- A compact model specialized for wire mesh processing - Processing mesh reinforcement by hooking it onto the support base

• others

- Maximum of 20 pieces of D10 simultaneous bending (maximum of 7 pieces of D19) - Ideal for mass processing of slab bars and corner bars - Also ideal for mass processing of single anchors

• others

- Transport of products processed by devices such as rebar automatic bending machines - Stable transport regardless of the size of the products - Possible transport of long items (parallel installation) or over long distances (series installation) using multiple units - Effective conveyor length of 6,800mm

• others

- Transport of products processed by rebar automatic bending machines and others - Stable transport regardless of the size of the products - Capable of transporting long items or over long distances with multiple units - Effective conveyor length of 5,300mm

• others

- Compatible with shapes used in civil engineering, bridges, etc. - Capable of upward and downward bending (upward bend: 15° to 135°, downward bend: 15° to 135°) - Reinforcement is fixed with a chucking device to improve the quality of processed products - Built-in piece counter reduces the workload of counting pieces - Data input is via a touch panel, allowing for bending shape, dimensions, and angle settings - Up to 200 processing data entries can be registered - TLINKS model (equipped with IoT devices)

• others

- Corresponds to shapes used in civil engineering, bridges, etc. - Capable of upward and downward bending (upward bend: 15° to 135°, downward bend: 15° to 135°) - Reinforcement is fixed with a chucking device to improve the quality of processed products - Built-in piece counter reduces the workload of counting pieces - Data input is via a touch panel, allowing for bending shapes, dimensions, and angle settings - Up to 200 processing data can be registered - TLINKS model (equipped with IoT devices)

• others

- Compatible with shapes used in civil engineering, bridges, etc. - Capable of upward and downward bending (upward bend: 15° to 135°, downward bend: 15° to 90°) - Reinforcement is fixed with a chucking device to improve the quality of processed products - Data input is via a touch panel, allowing for bending shapes, dimensions, and angle settings - Up to 200 processing data entries can be registered - TLINKS model (equipped with IoT devices)

• others

- Capable of cutting short lengths from 50mm and above - In short length cutting mode, the conveyor cuts while tilted, reducing the drop operation time! - Data input uses a touch panel - The cutting machine is equipped with MC-51W - Cutting blade width is 190mm (can cut 16 D10s simultaneously) - Conveyor lengths available in 2×7, 4×7, and 6×7 specifications - With the addition of the alignment supply device (TAS-II) as an optional accessory, efficiency in material supply is also possible

• others

- Cutting and bending of bar materials from D10 to D22 (SD295 to SD490) is possible. - Multiple pieces can be processed, and 3D processing is available. - Equipped with rib node detection function. - TLINKS model (equipped with IoT devices).

• others

- Optimal for single and double anchors from D16 to D38. *However, double anchor processing for SD390 D38 is not possible. - Automatically supplies rebar to the bending machine and retrieves the processed products. - Long-length processing can also be done by one person. - Angle settings can be adjusted with a dial, allowing for two different angles. - Large radius processing is possible (φ250, φ300, φ400 / φ500, φ600).

• others

- Processing possible for D10 to D25 - Effective for long-length processing - Data input is done via a touch panel, allowing for bending shape and dimension settings - The touch panel is centrally located on the device for easy input - TLINKS model (equipped with IoT devices)

• others

- Processing possible from D10 to D25 - Effective for long-length processing - Data input is done via a touch panel, allowing for bend shape settings - The touch panel is centrally located on the device for easy input - An optional pipe counter can be installed

• others

- Processing possible for D10 to D16 - Data input is done via a touch panel, allowing for bending shape settings - The touch panel is located in the center of the device, making shape changes efficient - Changing setups when altering rebar diameter is easy

• others

- High-strength rebar processing; ideal for closed-loop hoops, railway (Shinkansen) construction, and building construction. - Compatible with high-strength SD785 D10 to D16 (SD490 D10 to D25). - Fixes rebar with a chucking device to improve the quality of processed products. - Data input via a touch panel allows for setting bending shapes, dimensions, and angles. - The touch panel is centrally located on the device to reduce the movement burden on the operator. - Improved bending accuracy using an inverter, considering material properties. - Built-in piece counter reduces the workload of confirming the number of pieces. - TLINKS model (equipped with IoT devices). - QR data reading capability available as an option.

• others

In response to customer needs, it has finally arrived: the first NC (Numerical Control) version of the main rebar automatic bending series with adjustable angles and dimensions. *The movement of the stop is manual. This product is eligible for the Small and Medium Enterprises Energy-Saving Investment Subsidy. - Added processing for D16, expanding the specification range. - Compatible with materials from D16 to D41 (SD490) for processing. *Standard pivot roller 6D. - Considering the effects of deformed bars, threaded rebar, material, and manufacturer, optional corrections are also possible. - Processes the main rebar into vertical bends, improving space efficiency and safety. - Capable of large R processing (250, 300, 400, 500, 600). *700 and 800 are optional. - From August 2025, options will be expanded: support for pivot rollers (7D, 8D). - TLINKS model (equipped with IoT devices). - QR data reading capability available as an option.

• others

- Model change implemented, increasing simultaneous processing count!! (D10×7 pieces, D13×5 pieces) - Automatic bending machine capable of processing D10 to D16 - Capable of both upward and downward bending, making complex processing easy - Ideal for processing that requires reverse bending of slab rebar, balcony rebar, residential foundation rebar, etc., as well as small dimension bending - Fixing rebar with a chucking device improves the quality of processed products - Recommended for a wide variety of processing - Data input is easy for anyone via a touch panel, allowing for bending shape, dimensions, and angle settings - Built-in piece counter reduces the workload of counting pieces - TLINKS model (equipped with IoT devices) - QR data reading compatible as an option

• others

- A highly versatile conveyor device that can be set up for the currently used rebar cutting machine - Air equipment is not used - Dimension settings are done with a handle, aligned with the measuring scale - Conveyor lengths are 5m x 6m and 7m x 8m

• others

- Automating the material supply work for the automatic cutting machine - Supplying fixed-length materials to the conveyor of the automatic cutting machine one by one - Reducing the operator's manual handling effort - Able to count the number of pieces, allowing for the supply of only the necessary quantity to the conveyor

• others

- Adoption of band saw cutting to improve the workability of pressure welding and the accuracy of cut surfaces and dimensions of threaded rebar. - Capable of cutting four types of standard-length materials in combination. - Easy dimension setting via data input on a touch panel. - Cutting blade width is 330mm (capable of cutting 9 D25 bars simultaneously). - Conveyor lengths are 12m x 12m and 13m x 13m. - TLINKS model (equipped with IoT devices). - Remote control installation available as an option.

• others

- Adoption of band saw cutting to improve the workability of pressure welding and the accuracy of cut surfaces and dimensions of threaded rebar. - Simultaneous cutting of 9 D51 bars and automatic cutting of large-diameter rebar, capable of cutting large quantities of SD490 and above. - Easy dimension setting via data input on a touch panel. - Improved workability with remote control operation. - Cutting blade width is 600mm (capable of simultaneously cutting 18 D25 bars). - Conveyor lengths are 12m x 12m and 13m x 13m. - Options: Bar counter and QR data reading. - TLINKS model (equipped with IoT devices).

• others

- Capable of cutting short lengths from 50mm onwards - In short length cutting mode, the conveyor remains tilted during cutting, reducing the drop operation time! - Data input uses a touch panel - The cutting machine is equipped with MC-51W - Cutting blade width is 190mm (can cut 16 D10s simultaneously) - Conveyor lengths available in 2×7, 4×7, and 6×7 specifications - By adding the alignment supply device (TAS-II) as an optional feature, efficiency in material supply can also be improved

• others

- First-ever belt conveyor cutting method!! Capable of cutting two types of fixed-length materials together - Adoption of belt conveyor method reduces transportation noise - Equipped with MC-41 cutting machine *Compatible with high-strength rebar (SD490) up to D32 - Cutting length can be set in 1mm increments - Data input via touch panel - Cutting blade width is 125mm (can cut 10 D10 rods simultaneously) - Conveyor lengths are 6m x 7m and 8m x 9m - TLINKS model (equipped with IoT devices) - Optional QR data reading capability available

• others

- Automation of the labor-intensive process from material feeding to dropping in rebar cutting - Uses a special belt to reduce noise during material transport - Equipped with cutting machine MC-41 - Cutting blade width is 125mm (capable of cutting 10 D10 bars simultaneously) - Conveyor lengths are 6m×7m, 8m×9m, and 10m×10m

• others

- Capable of large-scale automatic cutting and large stock. - Cutting dimension settings and drop position settings with a toggle switch. - Two types of combination cutting are possible. - Conveyor lengths are 8m×9m, 10m×10m, and 12m×12m. - Cutting blade width is 225mm (capable of cutting 18 D10s simultaneously).

• others

- Capable of large-scale automatic cutting and large stock. - Cutting length can be set in 1mm increments. - Data input is easy with dimension settings via a touch panel. - Easy setting for combinations and drop positions. - Capable of cutting two types of standard materials in combination. - In line specifications, capable of cutting four types of combinations. - Conveyor lengths are 8m x 9m, 10m x 10m, and 12m x 12m. - Efficient transportation is possible when combined with TAS-II or TS-V. - Cutting blade width is 300mm (capable of cutting 25 D10s simultaneously). - TLINKS model (equipped with IoT devices). - Options: Length counter, QR data reading.

• others

- Industry first! High-strength rebar SD590 D51 compatible model - Capable of automatic transport up to 900mm (TFC-LA 1,250mm) - Equipped with a residual material discharge device - Adoption of a belt conveyor system reduces transport noise - Cutting length can be set in 1mm increments - Data input via touch panel - Cutting blade width is 300mm (can cut 25 D10 bars simultaneously) - Conveyor lengths are 8m×9m, 10m×10m, 12m×12m - TLINKS model (equipped with IoT devices) - Reading of processing dimensions using a QR reader - Different processing efficiency for small materials, can be linked with alignment supply device model: TAS-II

• others

TFC-M-HTV Model Change Machine - Speed Increased by 33% through Structural Changes The drive system has been completely revamped from chain to rack and pinion mechanism! Achieves a 33% increase in speed while ensuring high precision. - New Feature: Next Processing Reservation System Reserve the next process during machining to eliminate machine downtime! Improved production efficiency through seamless continuous processing. - Enhanced Operability with Larger Screen Screen size expanded from 5.7 inches to 10.4 inches! Eliminates the hassle of screen switching, improving work efficiency with easy-to-understand operations and high visibility.

• others

Model change for TFC-M-H - Expanded compatible diameter from D38 to D41, significantly increasing the processing area. Enhanced conveyor rigidity allows for cutting of D41 and SD490! - Achieving high precision and high efficiency work through laser measurement. Adoption of laser distance measurement solves issues such as scale wear! Digital display improves operability for dimension settings. - Easy to clean, creating a comfortable working environment. Improved cleanliness and working conditions by streamlining scrap processing and preventing accumulation of iron powder and wire on the material table. Optional installation of a scrap bucket is available. - Conveyor lengths are 8m x 9m, 10m x 10m, and 12m x 12m.

• others

- B-25 and B-25-D improved bending machines specialized for processing grid bars used in reinforcement. - Capable of processing 180° hooks continuously while minimizing dimensional deviations. - Rollers can be produced up to a maximum diameter of φ300mm depending on the grid bars being processed. (Separate estimate required)

• others

- Angle settings are dial-based. - Up to two types of angle settings are possible (manual switching). - Compatible with high-strength rebar SD490 D51. - Comes with standard 6D support rollers. - Optional parts available for large R compatibility and support rollers for 4D/5D. - Diameters for large R (250, 300, 400/500, 600, 700, 800, 900, 1000).

• others

- Angle setting is dial-type - Up to 2 types of angle settings possible (manual switch) - SD490 supports up to D35 - Comes with standard 4D support roller - Optional parts available for large R, support rollers for 5D/6D/8D - Large R diameters (250, 300, 400/500, 600) - Large R support (φ700, 800 available on special order)

• others

- Ideal for processing hoop and star lap muscles - Angle setting is dial-type - Up to 5 types of angle settings are possible - Automatic stepping function for angle settings eliminates the need for changes during multi-angle bending - Arm type design accommodates thin shaft diameters - Two types of processing receiving table: processing method-specific and sub-plate type

• others

- Angle setting is point-based. - Due to the arm type, processing is possible even with a thin pivot axis (small R). - Comes with standard 4D pivot rollers. - Optional parts available for large R compatibility. - Diameter of large R (φ150・200).

• others

- Angle setting is point-based - Ideal for small dimension processing - Due to the arm type, processing is possible even with a thin pivot axis (small R) - Two types of processing receiving platforms: processing method-specific type and sub-plate type

• others

- Capable of processing circles and arc shapes essential for foundation pile work and tunnel construction. - The R setting is adjusted while observing the scale with the handle.

• others

- Circular and arc-shaped processing essential for foundation pile work and tunnel construction is possible. - The R setting can be adjusted while observing the scale with the handle.

• others

- Circular and arc-shaped processing essential for foundation pile work and tunnel construction is possible. - Setting the radius is easy with simple counter adjustments.

• others

- Circular and arc-shaped processing essential for foundation pile work and tunnel construction is possible. - Setting the radius is a simple counter adjustment.

• others

- Ideal for circular spiral rebar processing essential for seismic reinforcement work - Dedicated machine for bar materials - Made-to-order machine

• others

- Quiet design achieved through the adoption of a gear case - Motor built into the machine - Oil supply via hand pump - Compatible with D51-SD490 - Please contact us if you are considering cutting below D22

• others

- Silent design achieved through the adoption of a gear case - Motor built into the machine - Oil supply via hand pump - Compatible with D41-SD490 and D51-SD390 * The standard replacement blade has a shorter lifespan when cutting SD490.

• others

- Silent design achieved through the adoption of a gear case - Motor built into the machine - Oil supply via hand pump - Compatible with D35-SD490 and D41-SD390 * The standard replacement blade has a shorter lifespan when cutting with SD490.

• others