アイニチ List of Products and Services

Here is a case study of installing a stairlift in a residence in Osaka Prefecture. This time, we adopted the "Escort Slim" for indoor straight stairs. It can be installed on narrow stairs, and the chair that arrives at the top of the stairs can rotate in two stages: 55 degrees and 85 degrees, allowing those with limited mobility to get on and off safely and securely. 【Features of Escort Slim】 ■ For indoor straight stairs ■ Can be installed on narrow stairs ■ Rotates in two stages: 55 degrees and 85 degrees *For more details, please refer to the related link page or feel free to contact us.

• Lifts for the disabled
• lift
• Elevator installation work

Here is a case study of installing a stairlift at Mr. M's home in Osaka Prefecture. The client is elderly and has difficulty walking, making it challenging to go up and down the stairs, so they were considering the introduction of a stairlift. Due to the narrow width of the stairs and the condition of having a straight staircase of about 4 meters, we proposed the "Escort Slim" stairlift. When not in use, the seat can be folded up, allowing it to be compacted to just 25 cm from the wall, so the width of the stairs is not a concern. 【Installation Details】 ■ Location: Private residence ■ Stops: 2 stops (1st floor to 2nd floor) ■ Capacity: 1 person (maximum 90 kg) ■ Rated speed: 6.2 m/min *For more details, please refer to the related link page or feel free to contact us.

• Lifts for the disabled
• lift
• Elevator installation work

We would like to introduce a case where a Panasonic home elevator was installed in a private residence located in Osaka Prefecture. We received a request from the homeowner who wished to install a home elevator in their upcoming three-story private residence. To accommodate larger items and to ensure that all family members can use it in the future, we proposed the "1414 Midi Modern H" based on the dimensions of the hoistway. It can hold three people, with an effective internal dimension of a maximum entrance width of 950mm and a depth of 1150mm. Additionally, the maximum descent speed is 30m per minute, which helps reduce the travel time between floors. [Installation Details] ■ Location: Private residence ■ Stops: 4 stops (from 1st floor to rooftop) ■ Capacity: 3 people (maximum 200kg) ■ Rated speed: 20m/min up, 30m/min down *For more details, please refer to the related link page or feel free to contact us.

• Elevator installation work
• lift
• Transportation System

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed in a Chinese restaurant located in Okayama Prefecture. Originally, the restaurant only occupied the first floor, but an elevator was needed for the expansion to the second floor. Since there was no space for a kitchen on the first floor, a space-saving elevator was considered for installation in the hall. Additionally, due to the shape of the store, an L-shaped delivery opening was requested. Therefore, we proposed the smaller "ADC-400G model (L-shaped type)" from our product lineup. After installation, it was placed in the first-floor hall in a space-saving manner, ensuring it does not obstruct the movement of the staff working in the restaurant. 【Details of the Dumbwaiter Installation】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance/Exit Direction: L-shaped direction ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Delivery Opening: 1st floor 800mm, 2nd floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case of installing a dumbwaiter at an izakaya located in Kyoto Prefecture. Due to the presence of only a steep staircase for transporting food from the first to the third floor, they requested the installation of a dumbwaiter. Given the limited installation space and the short time frame before opening, we proposed the "ADC-400G." The manufacturing period is two weeks, and installation can be completed in one day, allowing for a speedy response. Additionally, the external dimensions of the unit are available from W570×D570mm. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Basket (Cargo Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance/Exit Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 800mm from 1st to 3rd floor *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a dumbwaiter was installed in a Chinese restaurant located in Saitama Prefecture. The dumbwaiter is used to transport Chinese dishes and beverages from the kitchen to the table seats on the 1st to 3rd floors. The entrance and exit direction is in an L-shape, allowing for the dishes to be loaded and unloaded from different directions on each floor. Additionally, the height of the retrieval opening has been raised by 455mm above the standard to 1055mm, aligning it with the height of the counter kitchen. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-700G ■ Load Capacity: 100kg ■ Exterior Material: Steel ■ Size of the Car (Platform): Width: 655mm × Depth: 655mm × Height: 750mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance and Exit Direction: L-shape ■ Lifting Speed: 45m/min (50/60Hz) ■ Retrieval Opening Heights: 1st floor 1055mm, 2nd floor 800mm, 3rd floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a dumbwaiter was installed in a Chinese restaurant located in Kanagawa Prefecture. The dumbwaiter is used to transport food and beverages from the kitchen to the tables on each floor. The standard height for the discharge opening of the lift is 700mm, but in this case, we raised the foundation on the first floor by +300mm to make it 1000mm, eliminating the step at the base of the dumbwaiter. 【Dumbwaiter Installation Details】 ■Model Number: ADC-400G ■Load Capacity: 30kg ■Exterior Material: Steel ■Car (Platform) Dimensions: Width: 400mm × Depth: 370mm × Height: 650mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance/Exit Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Discharge Opening Heights: 1st floor 1000mm, 2nd floor 700mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed at a hotel in Gunma Prefecture. It is used to transport food, beverages, and linens to the guest rooms on each floor. This time, the small freight elevator was installed in the hallway in front of the guest rooms on both the 1st and 2nd floors. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-600G ■ Load Capacity: 50kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 600mm × Depth: 570mm × Height: 650mm ■ Stops: 2 stops (1st floor - 2nd floor) ■ Entrance Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1F 800mm, 2F 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed at a gyoza specialty store in Hyogo Prefecture. Originally a traditional house, the building was renovated into a store. Given the current layout, serving from the first floor to the second floor would be challenging, so the introduction of a small freight elevator was considered. This time, we proposed the "ADC-500G," which can be installed in a minimum space of width: 620mm × depth: 620mm. The manufacturing takes two weeks, and installation is completed in one day, allowing for delivery even if the opening date is approaching. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-500G ■ Load Capacity: 40kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 500mm × Depth: 470mm × Height: 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance/Exit Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1F 800mm, 2F 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed in a ramen shop located in Chiyoda Ward, Tokyo. A new shop is being opened in an existing building. The building has two floors, and the small freight elevator will be used to transport food and beverages from the first floor to the table seats on the second floor. In this instance, we installed the elevator in the kitchen on both the first and second floors. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 2 (1st floor - 2nd floor) ■ Entrance Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1F 800mm, 2F 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed at a research institute in Gifu Prefecture. With the expansion of the research building, there was a need for an elevator. Due to the difficulty of securing significant space within the building, a model that could be installed in a compact space was desired. Based on the installation space and the items to be transported, we proposed the small freight elevator "ADC-700G type." Since the site has a high floor height, some of the intermediate panels were custom-made. 【Details of the dumbwaiter installation】 ■ Model number: ADC-700G (compact type) ■ Load capacity: 60kg ■ Size of the car (platform): Width: 700mm × Depth: 670mm × Height: 750mm ■ Lifting speed: 45m/min (50Hz/60Hz) ■ Installation location: Research institute *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case of installing a small freight elevator (dumbwaiter) in an office located in Nara Prefecture. In this office, the small freight elevator (dumbwaiter) is used to transport documents and office supplies to the conference room and office. This time, we installed a through-direction small freight elevator. With the entrance and exit openings on opposite sides, it allows for smoother loading and unloading depending on the building's structure. 【Details of the dumbwaiter installation】 ■Model number: ADC-700G type (compact type) ■Load capacity: 100kg ■Dimensions of the car (platform): Width: 700mm × Depth: 670mm × Height: 750mm ■Lifting speed: 45m/min (50Hz/60Hz) ■Installation location: Office *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case of installing a small freight elevator (dumbwaiter) at a factory located in Hiroshima Prefecture. In this factory, the small freight elevator is used to transport lightweight automotive parts and meals for employees to the upper floors. This time, we installed a stainless steel small freight elevator. Compared to the steel version, it is more resistant to heat and rust, allowing for cleaner use. 【Details of the Dumbwaiter Installation】 ■ Model Number: ADC-800G Type (Compact Type) ■ Load Capacity: 100kg ■ Size of the Car (Cargo Platform): Width: 755mm × Depth: 755mm × Height: 750mm ■ Lifting Speed: 45m/min (50Hz/60Hz) ■ Installation Location: Factory *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

We would like to introduce a case where a dumbwaiter was installed at a nursery school in Kanagawa Prefecture. At the newly opened nursery school, various items such as tools and luggage are scheduled to be transported using the dumbwaiter. The dumbwaiter is equipped with an intercom, allowing for smooth communication with people on different floors. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-800S (Compact Type) ■ Load Capacity: 80kg ■ Size of the Car (Cargo Platform): Width: 800mm × Depth: 800mm × Height: 900mm ■ Lifting Speed: 25m/min (50Hz/60Hz) ■ Installation Location: Nursery School *For more details, please refer to the related link page or feel free to contact us.

• lift
• Small baggage lift
• Elevator installation work

A small lift (blue lift) has been installed in a warehouse located in Shizuoka Prefecture. In renovating the existing warehouse to construct a second floor, a lift for transporting materials in the future became necessary. Considering the desire to differentiate the orientation and type of carts to be used, an L-shaped design was preferred. The items to be transported come in various shapes, and the installation space at the site was also limited. Therefore, we proposed a blue lift with an entrance and exit direction in an L-shape. After installation, the transportation of materials and products can now be carried out smoothly, even with the construction of the second floor. 【Case Study】 ■ Location: Warehouse ■ Types of items: Materials, products, etc. ■ Number of stops: 2 stops (1st floor to 2nd floor) ■ Entrance and exit direction: Single-opening door / L-shape ■ Lifting height: 3.0m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A small lift (blue lift) has been installed in an existing warehouse in Niigata Prefecture. The customer will use the small lift to transport machinery and equipment. This blue lift has been installed without a pit, and later, a ramp will be added by the construction team to allow for smooth loading of carts and other items. Our company has experience in installing various types of lifts. We can propose lifts tailored to the site conditions, so please feel free to contact us. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Machinery and equipment ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: Single door / One direction ■ Lifting height: 4.5m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A new warehouse has been built in Nagano Prefecture, where a small lift (blue lift) has been installed. The customer will use the small lift to transport electrical equipment and other items. The entrance direction is a single-opening door/one-way. The lift has been installed with two stops, from the first floor to the second floor. Our company has experience in installing various types of lifts. We can propose a lift that suits the site conditions, so please feel free to contact us. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Electrical equipment and others ■ Number of stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: Single-opening door/one-way ■ Lifting height: 2.75m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A small lift (Blue Lift) has been installed in a warehouse located in Hyogo Prefecture. Originally, the first floor was used as a warehouse and the second floor as an office, but as the second floor is now also being used as a warehouse, a lift was needed. Due to limited installation space and the condition that the site could not provide a three-phase 200V power supply, we proposed the Blue Lift. We adopted an L-shaped door that can be opened from different directions on both the first and second floors. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Clothing ■ Stopping points: 2 stops (1st floor to 2nd floor) ■ Entrance direction: Single-opening door/L-shaped direction ■ Lifting height: 3.25m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A small lift (Blue Lift) has been installed in a warehouse located in Yamaguchi Prefecture. We received an inquiry about installing a lift to transport car supplies and car parts from the first floor to the second floor in the newly built warehouse. Based on the request for a cost-effective installation using a household power supply, we proposed the Blue Lift. It was mentioned that car supplies and car parts would be transported using a small cart, but with the Blue Lift, a standard cart can be loaded and transported directly. 【Case Study】 ■ Location: Warehouse ■ Type of Cargo: Car supplies, car parts ■ Number of Stops: 2 stops (1st floor to 2nd floor) ■ Entrance Direction: Single-opening door / One direction ■ Lifting Height: 3.0m ■ Cage Size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A small lift (Blue Lift) has been installed at an office and warehouse located in Hiroshima Prefecture. It was determined that using stairs to transport products and materials to the second floor of the newly built office and warehouse would be difficult, and a lift was requested. This time, we proposed the Blue Lift, which allows for the transportation of goods along with the cart and can be used with a household power supply of AC 100V. The Blue Lift is a two-stop lift that can move between the first and second floors, operating quietly with minimal noise. [Case Study] - Location: Office and warehouse - Type of cargo: Products and materials - Stop points: Two stops (1st floor to 2nd floor) - Entrance direction: Single-opening door/one direction - Lifting height: 3.25m - Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

We installed a small lift (Blue Lift) at N General Goods Store in Mie Prefecture. In the process of renovating and refurbishing the building, we received a request to install an elevator. Additionally, there was a desire to transport goods directly to the second floor general goods store using a cart within the limited installation space. Due to the limited installation space, we proposed the Blue Lift. The basket of the Blue Lift uses a large basket (1000×800×H900), allowing for the transportation of standard-sized carts directly to the second floor general goods store. [Case Study] ■ Location: General Goods Store ■ Type of Goods: Products and packages ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance/Exit Direction: Single-opening door/One direction ■ Entrance/Exit Door: Two upper-opening doors (manual) ■ Lifting Height: 3.75m ■ Basket Size: Large basket (W: 800/D: 1000/H: 900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

We would like to introduce a case where a "Hyper Lift" was installed in a warehouse located in Hyogo Prefecture. There were requests such as "I want to transport large items to the upper floor of the warehouse" and "I want to load and unload from different entrance directions on the first and second floors." Based on the request to transport large items within the warehouse, we proposed the Hyper Lift. To accommodate loading and unloading in different directions, we opted for a through-direction setup this time. 【Case Study】 ■ Location: Warehouse ■ Stop Points: 2 stops (1st floor to 2nd floor) ■ Entrance/Exit Direction: Through direction ■ Entrance/Exit Door: One manual top-opening door ■ Type of Cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is an example of the installation of a "Hyper Lift" in a warehouse located in Chiba Prefecture. The paint color for this installation is ivory. The Hyper Lift is available in ivory, green, and gray, and you can choose your preferred color. If you would like a custom color, please consult with us. Additionally, the installation space at this site was limited, but we coordinated with the construction company to carry out the installation. The Hyper Lift can be installed in various locations such as factories and warehouses. 【Example】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance doors: Two upward-opening doors (manual) ■ Type of cargo: Precision machinery, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

We would like to introduce a case where a "Hyper Lift" was installed in a warehouse located in Chiba Prefecture. The Hyper Lift (simple lift) is used to transport equipment in existing warehouses. Using the Hyper Lift can help improve work efficiency. In this case, it has been installed on the first floor of the building without a pit. If there were a pit, the Hyper Lift could be made flush with the floor, but additional construction work would be required. If you have any questions, no matter how trivial, please feel free to ask. 【Case Study】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance door: One manual top-opening door ■ Type of cargo: Equipment and others *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is an example of the installation of a "Hyper Lift" in a warehouse located in Saitama Prefecture. The simple lift is used to transport equipment in existing warehouses. When you want to raise and lower goods efficiently and safely, the Hyper Lift is helpful. In this case, the Hyper Lift uses steel plate panels as an option for the lifting shaft. Unlike regular expanded metal, the steel plate panels cover the entire lifting shaft, so the contents inside are not visible. The color was painted according to the specified Nippon Paint number provided by the customer. 【Example】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One direction ■ Entrance doors: Two upward-opening doors (manual) ■ Type of goods: Equipment and others *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is an example of installing a "Hyper Lift" at an office and warehouse located in Fukui Prefecture. In this case, we received requests to transport using a cart and to have access in a through direction (where entry and exit can be made from both sides). The lift was manufactured with four stops, from the 1st to the 4th floor. The lifting height of the Hyper Lift can reach up to 12 meters. Since the building has a basement and it was determined that the strength of the 1st floor slab alone could not support the weight of the lift, the lift shaft was designed starting from the basement. [Example] ■ Location: Office and warehouse ■ Number of stops: 4 stops (1st to 4th floor) ■ Entry and exit direction: Through direction ■ Entrance doors: Two manual top-opening doors ■ Type of cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is a case study of the installation of a "Hyper Lift" in a warehouse located in Saitama Prefecture. When the customer moved to the existing warehouse, there was no lift in the building, and they wanted to transport heavy printed materials to the second floor. Using the stairs and carrying them by hand was difficult, so they requested the installation of a lift. Due to limited space for lift installation in the existing building, we proposed the Hyper Lift (a simple lift) that could meet the conditions. After the installation, it has reduced employee fatigue and allowed for safer operations. [Case Study] - Location: Warehouse - Stops: 2 stops (1st floor to 2nd floor) - Entrance direction: One-way - Entrance doors: Two manual top-opening doors - Type of cargo: Equipment, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is a case study of the installation of a "Hyper Lift" in a warehouse located in Nara Prefecture. The relocated warehouse had an existing lift, but it was aging and lacked safety measures, so the consideration for a new lift installation was underway. Since there was a desire to implement proper safety measures and transport large carts and goods, we proposed the Hyper Lift. The Hyper Lift comes standard with safety devices and can smoothly transport large items, which also helps improve operational efficiency. [Case Study] ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance/Exit Direction: One direction ■ Entrance/Exit Doors: Two upward-opening doors (manual) ■ Type of Goods: Equipment, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Here is an example of the installation of a "Hyper Lift" at a factory located in Shizuoka Prefecture. With the construction of the new factory, the only means of transporting heavy items to the upper floors was via stairs, prompting the consideration of installing a lift. We understood the desire to keep installation costs as low as possible and proposed the Hyper Lift (a simple lift), which can be installed at a lower cost than an elevator. The Hyper Lift can be freely manufactured according to the installation location and intended use, and can be tailored to suit the materials being transported. [Example] ■ Location: Factory ■ Stops: 2 stops each (1st floor to 2nd floor) ■ Entrance opening direction: Each with single-opening doors / one direction ■ Entrance doors: Each with one manually operated top-opening door ■ Type of cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Lifting and transport system

Ainichi designs and sells elevators that prioritize safety standards, including fall prevention devices and limit switches. This document provides detailed guidance on how to choose elevators based on installation locations such as factories, warehouses, and restaurants. If you are unsure about what kind of elevator to install, please use this as a reference. [Contents] ■ How to choose elevators and freight lifts for factories and warehouses ■ How to choose serving elevators for restaurants ■ How to choose home elevators for residential use ■ Contact information *For more details, please refer to the PDF document or feel free to contact us.

• Home elevators and stairlifts
• Elevator
• Elevator installation work

The "VS Series" is a compact elevator manufactured by Panasonic. If you want to install an elevator but find it difficult to install a commercial elevator, we have upgraded the features for small buildings such as daycare centers and welfare facilities. We offer two types: the "XL Wellheart VS" with an interior depth of 1450mm that complies with the "Welfare City Development Ordinance" of municipalities nationwide, and the "Wellheart VS" with a space-saving depth of 1150mm. 【Features】 ■ Large operation buttons ■ One-touch emergency call button with telephone ■ LED lighting ■ Horizontal handrails ■ Multi-beam door sensors *For more details, please refer to the related link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

The case study collection of elevators is a compilation of various elevator installations that respond to a range of requests such as "I want to install an elevator in a building that only has an external staircase during renovation or repair work" and "I want to transport cardboard boxes, trays, and food and beverages." These installations are found in places such as factories, stores, restaurants, schools, buildings, and condominiums, and the collection summarizes the background of the elevator installations, images before and after installation, and the effects after installation. [Background of Elevator Installation] ■ I want to install an elevator in a building that only has an external staircase during renovation or repair work. ■ I want to manually load cardboard boxes onto the elevator for transport. ■ I want to transport food and beverages using the elevator without going outside the building. ■ I want to install an elevator in a limited vertical transport space. ■ A problem has occurred where the external door of the elevator is heavy and difficult to open and close (repair). ★ The elevator installation case study collection is currently available for free! ★ *For more details, please refer to the external link page or feel free to contact us.

• maintenance
• Elevator installation work
• lift

Ainichi Co., Ltd. has installed a "dumbwaiter" for Mr. K in Kofu City, Yamanashi Prefecture. The first floor is a workspace for sorting vegetables and groceries, while the second floor is a residence. It is used to transport products up and down. Our dumbwaiter features a compact design that allows for efficient operation without waste. Additionally, it can be easily installed, keeping costs lower compared to other lifts, making it economically reassuring. [Case Overview (Excerpt)] ■ User: Mr. K, Kofu City, Yamanashi Prefecture ■ Installation Site: Workspace and residence ■ Model Number: ADC-500G ■ Load Capacity: 40kg ■ Exterior Material: Steel *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

We installed a small cargo lift for Mr. S at an izakaya located in Kagoshima City, Kagoshima Prefecture. Since it will be used in a newly constructed building, the lift was installed first. It is mainly intended for transporting food, beer cases, and other alcoholic beverages. By removing the shelves inside the cage, items such as beer servers can also be lifted. 【Overview】 ■ Model number: ADC-600G ■ Load capacity: 50kg ■ Exterior material: Steel ■ Cage (platform) dimensions: Width 600mm × Depth 570mm × Height 650mm ■ Number of stops: 2 stops (1st floor - 2nd floor) ■ Entrance direction: One direction ■ Lifting speed: 45m/min (50/60Hz) ■ Height of the exit: 700mm (standard height) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter has been installed at a udon restaurant located in Nada Ward, Kobe City, Hyogo Prefecture. Due to the aging of the building, a new store is being constructed, and a dumbwaiter has been installed between the first and second-floor kitchens. The second floor has a spacious seating area where regular live events are held. The dumbwaiter will help streamline operations. 【Overview】 ■Model number: ADC-500G ■Load capacity: 40kg ■Exterior material: Steel ■Basket (cargo) dimensions: Width 500mm × Depth 470mm × Height 650mm ■Stops: 2 stops (1st floor - 2nd floor) ■Entrance direction: One-way ■Lifting speed: 45m/min (50/60Hz) ■Height of the outlet: 1F 800mm, 2F 800mm ■Installation time: 1 day *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

We carried out renovation work on the dumbwaiter at a Chinese restaurant located in Amagasaki City, Hyogo Prefecture. The dumbwaiter is used to transport dishes between multiple floors of the restaurant. This time, we renovated it due to issues with a machine from another company. 【Overview】 ■ Installation Location: Amagasaki City, Hyogo Prefecture ■ Establishment: Chinese Restaurant ■ Item Number: Renovation Work ■ Stopping Points: 3 stops (1st floor - 3rd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter has been installed at a creative kushikatsu restaurant located in Nishinomiya City, Hyogo Prefecture. The dumbwaiter is used to transport dishes and drinks such as kushikatsu and grilled skewers. 【Overview】 ■ Installation Location: Nishinomiya City, Hyogo Prefecture ■ Installation Store: Creative Kushikatsu Restaurant ■ Model Number: ADC-400G ■ Stops: 2 stops (1st floor - 2nd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter has been installed at a takoyaki shop located in Osaka City, Osaka Prefecture. The shop offers takoyaki and okonomiyaki, and the dumbwaiter is used to transport food and drinks. The lift was installed as part of the renovation of the existing store. 【Overview】 ■ Installation Location: Osaka City, Osaka Prefecture ■ Installed Store: Takoyaki Shop ■ Model Number: ADC-400G ■ Stops: 2 stops (1st floor - 2nd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter has been installed at a steakhouse located in Osaka City, Osaka Prefecture. It is used to transport food and drinks. The dumbwaiter can be utilized as a product through assembly work. This time, the area around the dumbwaiter is enclosed due to interior construction. 【Overview】 ■Model Number: ADC-400G ■Load Capacity: 30kg ■Exterior Material: Steel ■Basket (Cargo) Size: Width 400mm × Depth 370mm × Height 650mm ■Stop Locations: 2 stops (1st floor - 2nd floor) ■Entrance/Exit Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Height of Outlet: 1st Floor 700mm, 2nd Floor 700mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter (a small freight elevator) has been installed in an izakaya (bar) located in Toyohashi City, Aichi Prefecture. The installed dumbwaiter is a 700G type with a load capacity of 60 kg. The effective dimensions of the basket are W700 × D670 × H750 mm, allowing for the transportation of a large amount of food and drinks at once. In this case, the height of the discharge openings (the height from the floor to the bottom of the basket) is set at 800 mm for the 1st floor and 850 mm for the 2nd floor, which is higher than the usual 600 to 700 mm. 【Overview】 ■ Model number: ADC-700G ■ Load capacity: 60 kg ■ Exterior material: Steel ■ Basket (platform) size: Width 700 mm × Depth 670 mm × Height 750 mm ■ Number of stops: 2 stops (1st floor - 2nd floor) ■ Entrance/exit direction: One-way ■ Lifting speed: 45 m/min (50/60 Hz) ■ Discharge opening height: 1F 800 mm, 2F 850 mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter (a small freight elevator) has been installed at a Korean barbecue restaurant in Nagoya City, Aichi Prefecture. We received a call regarding the installation of a dumbwaiter for the new store opening, although the details had not yet been finalized. Additionally, there was a desire to have it installed as soon as possible, so we visited the site to discuss and assess the situation, and we proposed a suitable type of dumbwaiter. This time, it was installed to allow movement between the kitchen on the first and second floors. Items prepared in the kitchen and those finished by customers will be transported to each floor. 【Overview】 ■Model number: ADC-700G ■Load capacity: 60kg ■Exterior material: Steel ■Cabin (platform) dimensions: Width 700mm × Depth 670mm × Height 750mm ■Stops: 2 stops (1st floor - 2nd floor) ■Entrance direction: One-way ■Lifting speed: 45m/min (50/60Hz) ■Height of the discharge opening: 1F 600mm, 2F 500mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter (a small freight elevator) has been installed at a seafood restaurant located in Shizuoka City, Shizuoka Prefecture. The first floor is connected to the kitchen, while the second floor is connected to the dining area. The entrance and exit directions allow for separate access from both the first and second floors, utilizing a through-direction design. Due to the structure of the restaurant, installing the dumbwaiter in a through-direction allows dishes placed in the dumbwaiter from the kitchen on the first floor to be quickly transported to the dining area on the second floor. 【Overview】 ■ Model number: ADC-400G ■ Load capacity: 30kg ■ Exterior material: Steel ■ Size of the basket (cargo platform): Width 400mm × Depth 370mm × Height 650mm ■ Number of stops: 2 stops (1st floor - 2nd floor) ■ Entrance and exit direction: Through direction ■ Lifting speed: 45m/min (50/60Hz) ■ Height of the discharge opening: 1F 800mm, 2F 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter (a small freight elevator) has been installed in a Japanese restaurant located in Hikone City, Shiga Prefecture. The restaurant has been opened after renovating a two-story warehouse, preserving the essence of the 100-year-old structure. On the second floor, a sliding door has been installed in front of the dumbwaiter to allow for easy opening and closing. The dumbwaiter is installed in both the first and second floors' kitchens, and it is used to transport prepared dishes and drinks. 【Overview】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Basket (Cargo Area) Dimensions: Width 400mm × Depth 370mm × Height 650mm ■ Stop Locations: 2 stops (1st floor - 2nd floor) ■ Entrance/Exit Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Outlet Height: 1F 800mm, 2F 700mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

We have installed a dumbwaiter (a small freight elevator) at a seafood izakaya located in Funabashi City, Chiba Prefecture. The height from the floor to the door of our dumbwaiter (ADC-400G) is standard at 700mm, but this time it has been installed at a slightly higher height of 800-850mm. This reduces the need to bend over, making it easier to load and unload items while standing. We made our proposal based on the conditions of the site this time. 【Overview】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Area): Width 400mm × Depth 370mm × Height 650mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance/Exit Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Extraction Opening: 1st Floor 850mm, 2nd Floor, 3rd Floor 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems

A dumbwaiter (a small freight elevator) has been installed at a steak restaurant located in Nagasaki City, Nagasaki Prefecture. The steak restaurant will open on the first and second floors of the building. It has been installed to smoothly transport food, ingredients, and dishes between the kitchens on the first and second floors. To blend in with the interior of the store, the construction team surrounded the dumbwaiter with walls and installed a four-sided frame at the entrance and inspection openings. 【Overview】 ■Model number: ADC-500G ■Load capacity: 40kg ■Exterior material: Steel ■Size of the car (cargo platform): Width 500mm × Depth 470mm × Height 650mm ■Number of stops: 2 stops (1st floor - 2nd floor) ■Entrance direction: One-way ■Lifting speed: 45m/min (50/60Hz) ■Height of the exit: 1st floor 800mm, 2nd floor 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Elevator installation work
• Other elevators and transport systems