大阪高波 List of Products and Services

A "switching power supply transformer" is an important electronic device that significantly influences the performance of switching power supplies, alongside semiconductor devices. Its performance has a considerable impact on the high performance of power supplies. The performance of this transformer is determined by the magnetic materials used in it, which are generally referred to as ferrite (iron powder) magnetic materials. Due to its characteristics of being compact and low-cost, the switching power supply transformer is used in household appliances such as inverter air conditioners, DVD players, and LCD TVs, and it is expected to be adopted in a wide range of electronic devices in the future. 【Features】 ■ Compact and lightweight design ■ Can operate at various voltage levels and frequencies, making it suitable for a wider range of applications ■ Operates in temperature ranges that are difficult for conventional transformers ■ Suitable for high-performance electronic systems *For more details, please refer to the PDF materials or feel free to contact us.

• Other PCs and OA equipment

The "WB Transformer" is a newly conceived transformer that incorporates a no-cut iron core into a newly developed coil bobbin. We have developed a coil bobbin and an iron core winding device, achieving efficiency and stability in the winding, insulation processing, and iron core winding operations. It is an ecological transformer that promotes resource conservation and energy efficiency. 【Features】 ■ Compact, lightweight, and slim ■ High reliability ■ Fully utilizes iron core performance ■ No cuts or gaps in the iron core ■ Uses a coil bobbin *For more details, please refer to the PDF document or feel free to contact us.

• others

"FFX" is a transformer that uses a ferrite core. Models "ER-28L-BZ," "ER-35-BZ," and "ER-40-BZ" are available in the lineup. It is suitable for switching power supplies. Additionally, we offer a wide range of variations to meet diverse needs. We also have a variety of special sizes available, so please feel free to consult with us. 【Features】 ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Abundant variations ■ A wide variety of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

• others

"FVX" is a transformer suitable for switching power supplies, featuring a ferrite core. We offer models such as "ER-28-BZ," "ER-28L-BZ," and "ER-35-BZ" in our lineup. With a wide variety of options, we can meet a broad range of needs. Additionally, we have a diverse selection of special sizes available, so please feel free to consult us. 【Features】 ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Wide variety of options ■ A diverse selection of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

• others

"FHX" is a transformer that uses a ferrite core. It is suitable for switching power supplies. With a wide variety of options, we can meet a broad range of needs. Additionally, we offer a diverse selection of special sizes, so please feel free to consult us. 【Features】 ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Abundant variations ■ A wide range of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

• others

The "OIE" is a flat-type transformer that uses an OI core. We offer models starting with a maximum capacity of 6.0VA, such as "00-08-DD," as well as "00-12-DD" with a maximum capacity of 9.0VA, and "01-56-DD" with a maximum capacity of 130.0VA. The primary and secondary windings are separated, complying with international safety standards. 【Features】 ■ Uses OI core ■ OI core, flat type ■ Primary and secondary windings are separated ■ Complies with international safety standards ■ Safety standards: PSE UL CSA *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our wound core, horizontal transformer 'WCQ'. We have a rich lineup, including the "01-00-AA" with a maximum capacity of 80.0VA and the "15-00-AA" with a maximum capacity of 1,200.0VA. It is suitable for cases where there are height restrictions due to installation methods. Additionally, it is designed in a clamp frame type to allow for the use of terminal blocks, and it uses a bobbin structure where the primary and secondary coils are separated, making it compliant with international safety standards. 【Features】 ■ Ideal for cases where there are height restrictions due to installation methods ■ Designed in a clamp frame (angle) type to allow for the use of terminal blocks ■ Uses a bobbin structure with separated primary and secondary coils ■ Compliant with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "WAQ" is a transformer finished in a clamp frame (angle) type to allow the use of terminal blocks. It uses a bobbin structure where the primary coil and secondary coil are separated, and it complies with international safety standards. It is suitable for situations where there are width restrictions in the installation method. We also offer models such as "01-00-AA" with a maximum capacity of 80.0VA, "01-50-AA" with a maximum capacity of 120.0VA, and "02-00-AA" with a maximum capacity of 160.0VA. 【Features】 ■ Suitable for situations where there are width restrictions in the installation method ■ Finished in a clamp frame (angle) type to allow the use of terminal blocks ■ Uses a bobbin structure where the primary coil and secondary coil are separated ■ Complies with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "WBQ" is a transformer suitable for situations where there are height restrictions due to installation methods. We offer models such as "01-00-AA" with a maximum capacity of 80.0VA, "01-50-AA" with a maximum capacity of 120.0VA, and "02-00-AA" with a maximum capacity of 160.0VA. Additionally, we use a bobbin structure where the primary and secondary coils are separated, ensuring compliance with international safety standards. 【Features】 ■ Ideal for situations with height restrictions due to installation methods ■ Uses a bobbin structure with separated primary and secondary coils ■ Complies with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF documentation or feel free to contact us.

• others

We would like to introduce our cut-core vertical transformer 'VCZ'. Since it uses a cut-core, it is smaller and lighter compared to EI-type transformers. Please choose the most suitable option from a wide variety of selections. Additionally, various terminals can be selected. 【Features】 ■ Uses a cut-core ■ Smaller and lighter compared to EI-type transformers ■ Choose from a wide variety of options ■ Various terminals available ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

"HCZ" is a compact and lightweight transformer compared to EI type transformers, as it uses a cut core. We offer a wide lineup including "C6.3ZA," "C008ZA," "C010ZA," and "C16AZA." Please choose the most suitable option from our rich variety. You can also select from various terminals. 【Features】 ■ Uses cut core ■ Smaller and lighter than EI type transformers ■ Ability to choose from a wide variety of suitable options ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "VBZ" is a transformer of the clamp frame (angle) type. It uses a layer paper coil with interlayer paper inserted between each layer. You can choose from a wide variety of suitable options. Additionally, it comes with a terminal block for easy wiring with crimp terminals. 【Features】 ■ Clamp frame (angle) type ■ Uses a layer paper coil with interlayer paper inserted between each layer ■ Allows selection of the optimal option from a wide variety ■ Comes with a terminal block for easy wiring with crimp terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HBZ" is a transformer of the clamp frame (angle) type. It features models such as the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4I-40-ZB" with a maximum capacity of 100.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. It uses rare paper coils with interlayer paper inserted between each layer, allowing you to choose the most suitable option from a wide variety. Additionally, it comes with a terminal block for easy wiring with crimp terminals. 【Features】 ■ Clamp frame (angle) type ■ Uses rare paper coils with interlayer paper inserted between each layer ■ Options available from a rich variety ■ Terminal block included for easy wiring with crimp terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the transformer "VNZ" that we handle. It features a rare paper type with interlayer paper inserted between each layer. A wide variety is available, making it compatible with any terminal. Additionally, we offer models with a maximum capacity of 60.0VA ("4H-29-ZB"), 70.0VA ("4H-35-ZB"), and 100.0VA ("4I-40-ZB"), up to a maximum capacity of 440.0VA. 【Features】 ■ Rare paper type with interlayer paper inserted between each layer ■ Clamp frame (angle) type ■ Wide variety available ■ Compatible with any terminal ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HNZ" is a layer-type transformer with interlayer paper inserted between each layer. It features a clamp frame (angle) type and offers a wide variety of options, making it compatible with any terminal. Additionally, we have a rich selection including the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4H-35-ZB" with a maximum capacity of 70.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. 【Features】 ■ Layer-type transformer with interlayer paper inserted between each layer ■ Clamp frame (angle) type ■ Wide variety of options ■ Compatible with any terminal ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VNR" is a transformer of the clamp frame (angle) type. It includes models such as "4H-50-AB" with a maximum capacity of 80.0VA and "4I-50-AB" with a maximum capacity of 120.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. Additionally, an insulating cover is placed over the primary winding to ensure separation from the secondary winding, and it complies with international safety standards. However, the only terminals that can be used are lead wires. 【Features】 ■ Clamp frame (angle) type ■ Insulating cover placed over the primary winding to ensure separation from the secondary winding ■ Complies with international safety standards ■ Only lead wires can be used as terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our company's clamp frame (angle) type transformer "HNR." An insulating cover is placed over the primary winding to ensure separation from the secondary winding, making it compliant with international safety standards. However, the only terminals that can be used are lead wires. We also offer models with maximum capacities such as 80.0VA "4H-50-AB," 120.0VA "4I-50-AB," and 130.0VA "4I-55-AB." 【Features】 ■ Clamp frame (angle) type ■ Insulating cover over the primary winding to ensure separation from the secondary winding ■ Compliant with international safety standards ■ Only lead wires can be used as terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VNQ" is a transformer of the clamp frame (angle) type. It is available in the lineup with a maximum capacity of 40.0VA ("4G-40-CB"), 70.0VA ("4H-40-CB"), and 80.0VA ("4H-50-CB"). This is a two-layer type that complies with international safety standards, with the primary and secondary windings wound on separate bobbins, and the only usable terminals are lead wires. 【Features】 ■ Complies with international safety standards ■ Two-layer type with primary and secondary windings on separate bobbins ■ Usable terminals are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HNQ" is a transformer of the clamp frame (angle) type. It is a two-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. Note that only lead wires can be used as terminals. We also offer models such as "4G-40-AB" with a maximum capacity of 40.0VA, "4H-40-AB" with a maximum capacity of 70.0VA, and "4H-50-AB" with a maximum capacity of 80.0VA. 【Features】 ■ Compliant with international safety standards ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals that can be used are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VNI" is a transformer of the clamp frame (angle) type. It features a bobbin structure with the primary and secondary windings separated and an insulating cover, complying with international safety standards. However, only lead wires can be used for the terminals. 【Features】 ■ Primary and secondary windings are separated ■ Bobbin structure with insulating cover ■ Complies with international safety standards ■ Terminals can only use lead wires ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HNI" is a transformer of the clamp frame (angle) type. We offer the "4G-40-AB" with a maximum capacity of 40.0VA. The conditions for maximum capacity are 50/60Hz, with one circuit for both input and output. The primary and secondary windings are separated, featuring a bobbin structure with an insulating cover, compliant with international safety standards. However, only lead wires can be used for the terminals. 【Features】 ■ Box-type bobbin, horizontal angle ■ Safety standards: PSE UL CSA EN ■ Primary and secondary windings are separated, with an insulating cover in a bobbin structure ■ Compliant with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VNE" is a transformer of the clamp frame (angle) type. Only lead wires can be used for the terminals. The primary and secondary windings are separated and comply with international safety standards. We offer models including the "4G-30-AB" with a maximum capacity of 40.0VA, the "4G-35-AB" with 45.0VA, and the "4G-40-AB" with 50.0VA. 【Features】 ■ Split bobbin, vertical angle ■ Safety standards: PSE UL CSA ■ Primary and secondary windings are separated ■ Complies with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HNE" is a transformer of the clamp frame (angle) type. It separates the primary and secondary windings and complies with international safety standards. However, only lead wires can be used for the terminals. We offer models such as "4G-30-AB" with a maximum capacity of 40.0VA and "4H-50-AB" with 100.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Split bobbin, horizontal angle ■ Safety standards: PSE UL CSA ■ Separation of primary and secondary windings ■ Compliance with international safety standards ■ Only lead wires can be used for terminals *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VNA" is a transformer that adopts a high-efficiency coaxial winding and a clamp frame (angle) type. It is available in a maximum capacity range of 35.0VA to 320.0VA. There is a wide variety of product options, and terminals can also be freely selected. Additionally, it complies with the safety standard PSE. 【Features】 ■ Standard bobbin, vertical angle ■ Safety standard: PSE ■ Adopts high-efficiency coaxial winding ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HNA" is a transformer that adopts a high-efficiency coaxial winding and features a clamp frame (angle) design. It complies with the safety standard PSE. There is a wide variety of product options available, and terminals can be freely selected. We offer models such as the "4G-25-AB" with a maximum capacity of 35.0VA, the "4G-30-AB" with 40.0VA, and the "4L-60-AF" with 320.0VA. 【Features】 ■ Standard bobbin and horizontal angle ■ Safety standard: PSE ■ High-efficiency coaxial winding adopted ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BVU" is a channel frame (band cover) type transformer. It is a dual-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. This model is designed for mounting on printed circuit boards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BA" with a maximum capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Pin-type dual-layer bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Dual-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards ■ Designed for mounting on printed circuit boards *For more details, please refer to the PDF materials or feel free to contact us.

• others

"BHU" is a channel frame (band cover) type transformer. It is a two-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BB" with a maximum capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type two-layer bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BVS" is a channel frame (band cover) type transformer that implements a printed circuit board in the transformer. We offer models starting with the "57-30-AC" with a maximum capacity of 18.0VA, as well as the "60-30-AA" with 20.0VA and the "66-30-AC" with 23.0VA. It features a dual-layer design with primary and secondary windings wound on separate bobbins, and it complies with international safety standards. 【Features】 ■ Dual-layer bobbin, vertical type (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board in the transformer ■ Dual-layer design with primary and secondary windings on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "BHS" is a channel frame (band cover) type transformer, which is designed to mount a printed circuit board onto the transformer. It features a two-layer structure with primary and secondary windings wound on separate bobbins, conforming to international safety standards. We offer models such as the "57-30-AA" with a maximum capacity of 18.0VA and the "60-30-AA" with a maximum capacity of 20.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Two-layer bobbin, horizontal type (band) ■ Safety standards: PSE UL CSA EN ■ Type that mounts a printed circuit board onto the transformer ■ Two-layer structure with primary and secondary windings on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "BVK" is a channel frame (band cover) type transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. This type features a printed circuit board mounted on the transformer, with maximum capacities of 1.0VA for the "28-11-BC" and 2.0VA for the "35-12-BC." 【Features】 ■ Pin-type box bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Type with printed circuit board mounted on the transformer ■ Primary and secondary windings are separated to comply with international safety standards ■ Bobbin structure with coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "BHK" is a channel frame (band cover) type transformer. It is a type that implements a printed circuit board onto the transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coils are housed in an insulated box bobbin structure. 【Features】 ■ Pin-type box bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board onto the transformer ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with coils housed in an insulated box *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HPV" is a two-layer type transformer with primary and secondary windings wound on separate bobbins. We offer the "41-14-BZ" with a maximum capacity of 3.0VA and the "41-17-BZ" with 4.0VA. The bobbin structure allows for a longer creepage distance, resulting in higher dielectric strength. 【Features】 ■ Pin-type dual-layer bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Bobbin structure allows for a longer creepage distance ■ Achieves higher dielectric strength *For more details, please refer to the PDF document or feel free to contact us.

• others

"HPU" is a transformer of the printed circuit board mounting type. It is a two-layer type with primary and secondary windings wound on separate bobbins. It complies with international safety standards. We offer models such as "28-11-BZ" with a maximum capacity of 0.8VA and "35-10-BZ" with a maximum capacity of 1.5VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type dual-layer bobbin, horizontal ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "FPH" is a low-profile transformer for printed circuit board mounting. Compared to conventional transformers, it has a lower height and features a U-shaped pin design that enhances resistance to disconnection. By creating holes in the board, it can be mounted even lower. We offer a lineup including the "35-08" with a maximum capacity of 1.0VA, the "48-06" with 2.5VA, and the "57-10" with 7.0VA. 【Features】 ■ Pin-type split bobbin, low-profile ■ Safety standard: PSE ■ Lower height compared to conventional transformers ■ U-shaped pin design enhances resistance to disconnection ■ Can be mounted even lower by creating holes in the board *For more details, please refer to the PDF document or feel free to contact us.

• others

The "HPC" is a transformer of the printed circuit board mounting type. It complies with "PSE UL CSA." To enhance safety, it features a bobbin structure with a longer creepage distance between the primary and secondary windings. We offer the "35-10-BZ" with a maximum capacity of 1.5VA, and the conditions for maximum capacity are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Pin-type bobbin, horizontal ■ Safety standards: PSE UL CSA ■ Bobbin structure with a longer creepage distance between the primary and secondary windings *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "FPL" is a type of transformer that is resistant to disconnection by adopting L-shaped pins. We offer the "28-12" with a maximum capacity of 1.0VA and the "35-12" with a maximum capacity of 2.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. 【Features】 ■ L-shaped pin type split bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FPK" is a transformer with a printed circuit board pin mounting type. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. We offer models such as the "28-11-BZ" with a maximum capacity of 1.0VA, the "35-12-BZ" with 2.0VA, and the "41-17-BZ" with 5.0VA. 【Features】 ■ Pin-type split bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Primary and secondary windings are separated to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

• others

"FPG" is a type of transformer designed for printed circuit board mounting. We offer the "28-11-AZ" with a maximum capacity of 1.0VA and the "35-10-AZ" with a capacity of 1.8VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. By separating the primary and secondary windings, it complies with international safety standards. 【Features】 ■ Pin-type split bobbin, vertical type ■ Safety standards: PSE UL CSA ■ Separation of primary and secondary windings *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BVQ" is a two-layer bobbin, vertical type transformer with a channel frame (band cover) design. The terminals are only lead wires. To comply with international safety standards, it features a two-layer type with primary and secondary windings wound on separate bobbins. Additionally, the maximum capacity ranges from 8.0VA to 40.0VA. 【Features】 ■ Two-layer bobbin, vertical type (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BHQ" is a two-layer bobbin, horizontal type transformer with a channel frame (band cover) design. It is available in maximum capacities ranging from 8.0VA to 40.0VA. To comply with international safety standards, it features a two-layer design with primary and secondary windings wound on separate bobbins. However, the terminals are only lead wires. 【Features】 ■ Two-layer bobbin, horizontal type (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our transformer "BVM." It features a bobbin structure that separates the primary and secondary windings, with each coil housed in an insulated box, complying with international safety standards. Additionally, we offer a lineup ranging from a maximum capacity of 1.5VA to 30.0VA, with terminals available for lead wires only. 【Features】 ■ Channel frame (band cover) type ■ Separation of primary and secondary windings ■ Bobbin structure with each coil in an insulated box ■ Compliance with international safety standards ■ Terminals available for lead wires only *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BHM" is a channel frame (band cover) type transformer. It complies with international safety standards, and only lead wires can be used for the terminals. The primary and secondary windings are separated, and each coil is housed in an insulated box with a bobbin structure. We offer a lineup ranging from a maximum capacity of 1.5VA to 30.0VA. 【Features】 ■ Channel frame (band cover) type ■ Separation of primary and secondary windings ■ Bobbin structure with each coil housed in an insulated box ■ Complies with international safety standards ■ Terminals can only use lead wires *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BVI" is a channel frame (band cover) type transformer. It features a bobbin structure with separated primary and secondary windings and an insulating cover. It complies with international safety standards, and the terminals are only lead wires. Additionally, it includes models such as the "41-17-AC" with a maximum capacity of 5.0VA and the "48-21-AC" with a maximum capacity of 7.0VA. 【Features】 ■ Channel frame (band cover) type ■ Separated primary and secondary windings ■ Bobbin structure with insulating cover ■ Complies with international safety standards ■ Terminals are only lead wires *For more details, please refer to the PDF materials or feel free to contact us.

• others

"BHI" is a channel frame (band cover) type transformer. The terminals are only lead wires. The primary and secondary windings are separated, and it features a bobbin structure with an insulating cover, complying with international safety standards. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each, and we offer maximum capacities ranging from 5.0VA to 40.0VA. 【Features】 ■ Channel frame (band cover) type ■ Primary and secondary windings are separated ■ Bobbin structure with an insulating cover ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the transformer "BVE" that we handle. It is a channel frame (band cover) type transformer, with the primary and secondary windings separated, compliant with international safety standards. We offer a lineup ranging from a maximum capacity of 1.0VA to 50.0VA, with the maximum capacity conditions being 50/60Hz and one circuit for both input and output. 【Features】 ■ Primary and secondary windings are separated ■ Compliant with international safety standards ■ Channel frame (band cover) type ■ Safety standards: PSE UL CSA *For more details, please refer to the PDF materials or feel free to contact us.

• others