カワミツ List of Products and Services

This product is a sleeve that reinforces the connection of optical fibers. Made in Japan and manufactured in a clean room to ensure high reliability. The Nano Sleeve series is suitable for applications in optical component manufacturing where a small storage space is required. 【Specifications】 ■ Applicable Fiber - Type: Single-core to 8-core tape, Cut length: 10m or less ■ Sleeve Dimensions - Sleeve length: 40mm, Heat shrink diameter: approximately 4.2mm ■ Quantity: 25 pieces per bag *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "TPS-RCV1" is an inverter-type reel winder that responds well with low noise across all speed ranges. It allows for stepless winding, unwinding, stopping, and speed changing. Furthermore, the traversing mechanism can be set steplessly according to the wire diameter, and the reel detachment jack can be used either hydraulically or manually. 【Features】 ■ Inverter system ■ Low noise with responsive tracking across all speed ranges ■ Stepless winding, unwinding, stopping, and speed changing ■ Traversing mechanism can be set steplessly according to wire diameter ■ Reel detachment jack can be used either hydraulically or manually *Available for online business discussions! Please feel free to contact us.

• Transport machinery

The "EB230B model" is a ball roller that allows for variable speed control through inverter technology. The roller utilizes the elasticity of air, resembling a balloon-like structure. It deforms along the shape of the cable while in operation, resulting in minimal strain on the cable and preventing damage. Additionally, to reduce setup time, the main body is divided into three parts: the motor section and the base. Assembly is easy (pin-fixed) and installation is straightforward. 【Features】 ■ Split design + inverter control ■ Compatible with nylon ropes from 10mm to cables up to 170mm ■ No shape restrictions from fiber optic cables to triplex cables ■ Minimal damage to the outer layer of cables due to slipping ■ Up to three units can operate in conjunction *Available for online business discussions! Feel free to contact us.

• Transport machinery

The "TPS-RCE1" is an engine hydraulic reel winder that improves operability by concentrating the operation levers in one place. Since it is hydraulically driven, it allows for stepless winding, payout, stopping, and shifting. The engine and hydraulic pump are housed within a soundproof bonnet, resulting in low noise, and the reel attachment jack can be used with either hydraulic or manual operation. 【Features】 ■ Allows for stepless winding, payout, stopping, and shifting due to hydraulic drive ■ The traverser can be set steplessly according to the wire diameter ■ The reel attachment jack can be used with either hydraulic or manual operation ■ Improves operability by concentrating the operation levers ■ Low noise due to the engine and hydraulic pump being housed in a soundproof bonnet *Available for online consultations! Please feel free to contact us.

• Transport machinery

The "TPS-1000MAZ" is a compact and lightweight electric winch that can be easily disassembled into the base, engine, and main body parts. With the use of an inclined platform, it can be installed horizontally or vertically with steel pipes and angle legs according to the work requirements. The electric motor can be used over a wide range from tensioning to lifting operations by switching between high and low speeds. Additionally, it is equipped with a built-in reduction gear automatic brake and a double stop device with a reverse prevention mechanism, as well as a compact automatic tail rope device compatible with wire and fiber ropes. 【Features】 ■ Compact and lightweight, easily disassembled into the base, engine, and main body parts ■ Capable of horizontal installation and vertical installation with steel pipes and angle legs (using an inclined platform) ■ Equipped with a built-in reduction gear automatic brake and a double stop device with a reverse prevention mechanism ■ Comes with a compact automatic tail rope device compatible with wire and fiber ropes ■ Can be easily switched from electric to engine type without an adapter *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "TPS-400EAZ" is an engine winch equipped with a built-in reduction gear automatic brake and a double stop device with a reverse prevention mechanism. It is compact and lightweight, easily disassembled into the base, engine, and main body. It features a small, high-output 4-stroke engine compliant with exhaust regulations, and includes a small automatic tail rope device compatible with wire and fiber ropes. 【Features】 ■ Compact and lightweight, easily disassembled into the base, engine, and main body ■ Can be installed horizontally or vertically using steel pipes and angle legs (with an inclined platform) ■ Combines a built-in reduction gear automatic brake and a double stop device with a reverse prevention mechanism ■ Adopts a small, high-output 4-stroke engine compliant with exhaust regulations ■ Equipped with a small automatic tail rope device compatible with wire and fiber ropes *For more details, please refer to the PDF materials or feel free to contact us.

• Transport machinery

Kawamitsu Co., Ltd. handles "Crawler-type Hydraulic Winches." This product can operate independently for each side. The hydraulic circuit is designed as a load sensing circuit to improve efficiency. Additionally, by equipping rubber crawlers, it performs well on soft ground, and products with an oil cooler can operate continuously for 8 hours at rated capacity. Please feel free to contact us when you need assistance. 【Features】 ■ Independent operation for each side ■ Hydraulic circuit designed as a load sensing circuit for improved efficiency ■ Equipped with an automatic tail device ■ Good performance on soft ground due to rubber crawlers *Available for online business negotiations! Please feel free to contact us.

• Transport machinery

Introducing the OPGW aluminum pipe cutter 'OP-1' handled by Kawamitsu Sangyo Co., Ltd. The chassis housing is treated with anodizing, achieving specifications for high voltage insulation. It supports the replacement of consumables, allowing for the exchange of the circular blade. The two rollers for pipe support can be replaced if they become worn due to damage or dust clogging. 【Features】 ■ The chassis housing is treated with anodizing ■ Achieves specifications for high voltage insulation ■ Supports the replacement of consumables ■ The circular blade can be replaced as it is a consumable part ■ The two rollers for pipe support can be replaced if they become worn due to damage or dust clogging *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "KM-type self-propelled machine for overhead lines (wireless type)" handled by Kawamitsu Sangyo Co., Ltd. The diameter of the ground wire or power line is ACSR 120–610mm². The drive motor is 24V 100W, and it is equipped with two 12V sealed batteries. When fully charged, it operates for approximately 7 hours. 【Specifications】 ■ Travel speed: 0–25m/min ■ Climbing angle: 32° ■ Horizontal pulling force: 350N (35kg) ■ Overload switch timer: 0–3 minutes ■ External dimensions: approximately 250×490×640 (1000) ■ Weight: Main unit 19kg, battery 10kg, total approximately 29kg *Online business negotiations are currently being conducted! Please feel free to contact us.

• Work tools

During the removal of communication cables and similar items, the lifting and cutting operations are performed automatically. Since the removal machine is set at the rear of the truck, the cut cables fall to the back of the cargo area, eliminating the need for loading work. This allows for efficient and speedy operations, reducing the labor, personnel, and time required for workers. You can choose to fix the cable removal machine (KSR-75) to the vehicle or opt for a detachable version. By making it detachable, the main unit can be used as a truck when removed. *We offer vehicles in both unic type and small trucks (with PTO), allowing you to choose according to your needs. 【Features】 ■ Automatically performs lifting and cutting operations during the removal of communication cables and similar items ■ The removal machine is set at the rear of the truck ■ No loading work is required ■ Enables efficient and speedy operations ■ Reduces labor, personnel, and time for workers *Available for online business negotiations! Please feel free to contact us.

• Transport machinery
• Crane and others
• Specially equipped vehicles

NTT, various telecommunications companies, the Ministry of Land, Infrastructure, Transport and Tourism, power companies, local governments, and various wire manufacturers have a track record of adoption. 【Features】 - Significant improvement in mobility and safety due to weight reduction (approximately 15% compared to conventional models) - Easy to carry and improved workability due to the structural design - Compatible with closures from various manufacturers - Adopted by NTT, various telecommunications companies, the Ministry of Land, Infrastructure, Transport and Tourism, power meters, local governments, and various wire manufacturers. Patent number: No. 2649093, H11 year ★Notice of Company Name Change★ To further clarify our corporate image, we will change our company name from Kawamitsu Sangyo Co., Ltd. to Kawamitsu Co., Ltd. effective October 1, 2021. *Online business meetings available! Please feel free to contact us.

• Systems Architecture